Advanced Engineering Materials and Processing Technologies
Erscheinungsjahr 2016
ISBN: 978-3-03835-520-5
Verlag: Trans Tech Publications
Collection of selected, peer reviewed papers from the special topic volume with invited peer reviewed papers only.The 95 papers are grouped as follows: Chapter 1: Research and Development of Technologies and Tools for Material Processing;Chapter 2: Properties of Materials; Chapter 3: Materials in Construction; Chapter 4: Measurements, Testing and Monitoring in Mechanical Engineering; Chapter 5: Research and Design Machines and Units of Technological Equipment
Buch, Englisch, 620 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1170 g
ISBN: 978-3-03835-520-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Research and Development of Technologies and Tools for Material Processing
A New Method for Copper Spherical Surface Lathing with High Speed Steel Cutting Tool
Analysis of Vibration Amplitude in High-Speed Cutting for Hardened Steel
Application of Micro-Arc Oxidation Technology in Die Magnesium Alloy Wheels in Mass Production
Analysis of 45 Steel Rectangular Thin-Walled Parts Milling Deformation
Basic Experiment of Ultrasonic Deep Rolling with Longitudinal-Torsional Vibration
Cutting Force in High-Speed Face Milling AISI H13 Steel
Development of Nanomachining Mechanism Based on Molecular Dynamics Simulation
Die Forming Simulation of PM Parts Based on AMESim
Experimental Study on Laser Transmission Joining between PA66GF and AISI304
Experimental Study on Surface Quality in Milling Carbon Fiber Reinforced Plastics
Experimental Study on Ultrasonic Vibration-Assisted Scratch of SiCp/Al Composite
Global Stability Analysis on Combination Self-Excited Vibration of BTA Deep-Hole Boring Rotor Materials
Hilbert Curve Fractal Stacking in the Application of Path Planning in the Molten Molding
Investigation on Cutting Force and Temperature of Cutting Cu50Zr50 Metallic Glass by Molecular Dynamics Simulation
Light Scattering of HDPE and LDPE in Laser Transmission Welding
MD Simulation and Optimization Analysis for Nanoscale Material Removal Process
MD Simulations of Nanomachining Monocrystalline Silicon
Optimization Design of Diamond Circular Saw-Blade with Discontinuous Cutting and Uneven Distribution for Cutting Thin-Walled Tubes
Research and Modeling of Blades with Complex Surfaces Based on Laser Rapid Prototyping
Test and Analysis of Electric Arc Machining Characteristics of Titanium Alloy and High-Temperature Alloy
Research on Surface Quality for CBN Grinding Wheel Based on “Speed Effect”
Simulation and Experiment Study on Cutting Temperature in Diamond Ultra-Precision Cutting of Aluminum Alloy Mirror
Study on Influence Laws of Surface Roughness of Micro-Groove in Single Crystal Silicon under Diamond Fly-Cutting
Research on Error Model of the Al5052 Sheet Stamping Forming Parts
Test and Analysis of Low Temperature Air Cutting Performance to Difficult-to-Machine Materials
The Experiment Investigation of the Tool Wear in Diamond Ultra-Precision Cutting of Aluminum Alloy Mirror
The Influence of Welding Sequence on Welding Deformation of Sheet Metal Stamping
Dynamic Model of Material Removal Process in Through-Feed Centerless Grinding Based on the Lagrange Equation
Effect of FDM Process on Adhesive Strength of Polylactic Acid(PLA) Filament
Heat Transfer Analysis on Aluminum-Polymer Composite Molding Process
Material Plastic Side Flow and White Layer in Hardened Steel GCr15 Precision Turning
Study on the Forming Accuracy and Density of Eucalyptus/PES Fabricated by Laser Sintering
Study on the Laser Shock Processing with Square Spot of Titanium Alloy Based on ABAQUS
Study the Influence of Surface Treatment Technology to AZ31 Property Change
Temperature Field Simulation of Wood Powder/PES Composite Powder Material
The Study of Finite Element Simulation for Cooling after Heating Process of Rail
The Analysis of Tool Wear in Milling CFRP with Different Diamond Coated Tool
Finite Element Analysis of High Temperature Alloy Cutting Process Based on Abaqus
Thermal Stress Analysis of Powder Metallurgy Sintering Process Based on ANSYS
Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing
Technical Study of Jet Electrodeposition in Manufacture of Metal Parts
Chapter 2: Properties of Materials
Dynamic Porosity of 3D Network SiC Ceramic as the Shock-Damping and Acoustic-Absorbing Material for Ultra-Precise Machine Laying
Electrical Contact Property of AuNi9/AuCuAgZn Sheet Tribo-Couple
Electrochemical Characteristics of the Amorphous-Nanocrystal Ni–Mo Cathodes in Sodium Hydroxide Solution
Experimental and Modelling of Constitutive Equation of Polycarbonate Material
Finite Element Modeling and Simulation towards Metallic Microstructure of Titanium Alloy Based on Abaqus
Infulence of Chemical Composition and Metallographic Structure to Dimagnetic Stainless Steel
Mixing Y89 Influence on Mechanical Properties of Casting Mg17Al12
Pyrolysis Kinetics of PA66/CB
Study on Characteristics of Green Parts of Birch Flour/Polyester Composite by Selective Laser Sintering
Experimental Research on Selective Laser Sintering of Bamboo Flour/Polyamide Hot-Melt Adhensive Blend
Finite Element Simulation and Experimental Study on Micro-Milling Cobalt-Based Alloy
Chapter 3: Materials in Construction
Analysis of Durability Performance of Ionic Soil Stabilizer Improving Soil
Compressive Strength Analysis of Ionic Soil Stabilizer Improving Soil
Detecting and Expressing of Asphalt Materials Modulus Considering Temperature Effect
Fuzzy Comprehensive Evaluation for Road Base Material Selection Based on Analytic Hierarchy Process
Mechanics Mechanism Analysis of Asphalt-Aggregate Interface Damage
Mechanics Mechanism Analysis of Concrete Pavement Resonant Rubblization
Micro-Treatment Mechanism Study on Ionic Soil Stabilizer Improving Clay
Chapter 4: Measurements, Testing and Monitoring in Mechanical Engineering
The Study of the Electrothermal Heating Pipe Membrane Resistance Test Equipment
Developing of the Experimental Device that Test Magneto Rheological Fluid(MRF) Shear Yield Stress Nnder Non Uniform Composite Field
Development of a Chemiluminescence Detecting System Based on FPGA
Diagnostic Testing on Crack Propagation of Asphalt Pavement Materials
Stress Analysis of Stepped Oblique End-Face Combined Concave Die Based on the Least Square Method
Structure Damage Diagnostic Method of High-Flow Control Valve Stem
The Electrothermal Heating Tube Membrane Resistance Test Method Research
Design of the Auto-Stiffness Measuring Instrument for Electro Hydraulic Servo Valve Elastic Element
HLP Type Hydraulic Oil Analysis for Meso-Scale Hole Measurement
Advances in Skin Viscoelastic Detection Methods and Equipments
Development of the Jet Flow Testing System and the Influence of the Hydraulic Oil on the Jet Flow Quality
Spool Valve Hydraulic Measurement Flow Pattern Error Based on Variable Discharge Coefficient
UCBO Hydraulic Oil and Application on Hydraulic Measurement for Laval Nozzle Throat Diameter
HLP Type Hydraulic Oil in Meso-Scale Hole Measuring
Chapter 5: Research and Design Machines and Units of Technological Equipment
The Common 13Cr Steel RUL Forecast Model for Tri-High Gas Well Pipe
Design and Analysis of Paver Leveling Control System
Servo Valve Nozzle Fuzzy Clustering Analysis Pairing Algorithm
Design of Hydraulic Locking Mechanism Based on Material Friction
Motor Rotor Unit Composite Die Design and WEDM Programming of Stamping Dies (Convex-Concave Mould)
Simulation and Analysis of Passive Torque Servo System
Design of the Energy-Saving Heater Based on Semiconductor Nano Electrothermal Film
Research on Reverse Design of Flexible Rod Based on CMM
Free Modal Analysis for the Pinion of Logarithmic Spiral Bevel Gear with 20CrMnTi
Mechanical Analysis and Finite Element Simulation of Scissor Transmission Mechanism under Partial Load
Research on the Best Autofrettage Pressure of Ultra-High Pressure Valve Body
Research on Wheel-Shoe Wear for High Friction Composite Brake Shoes Based Foundation Brake Rigging in Railway Wagon
Simulation and Experimental Research on Rubber Waveform Generator
Study on Performances of Amorphous Three-Phase Asynchronous Motor
Reliability Analysis of Double Derrick Based on Stress Analysis
A Hormone-Transmission Inspired Multi-Layer Embryonics Supporting Hierarchical Self-Healing
Design of a Microwave Vacuum Drying Medicine Extract Model of Process Equipment
Research on CNC of FSW with Serial-Parallel Structure Based on 3-PRS Mechanism
Research on the Process of Ring-Involute Tooth Spherical Gear Based on Rapid Prototyping Processing
Structure Optimization of the Aluminum Alloy Frames of Flight Simulator
An Investigation on the Workpiece Roundness Generation in Centerless Grinding Based on the Integration of Virtual Machine Tool and Workpiece Material Removal Mechanism
The Construction of Dimensionless Nonlinear Dynamic Model and the Research on Chaotic Features of Vibration Cutting Based on Dynamic Fracture Mechanics
