Buch, Englisch, 630 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-03785-430-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Reviewers
Chapter 1: Electronic and Electrical Materials: Equipment and Instruments
Discussion on Solutions to SSN Based on Ansoft Simulation Analysis
AltBOC Receiver Design and Tracking Performance Analyze
A Two-Dimensional Photonic Crystal Structure for Improving Efficiency of Pbs Quantum Dots Electroluminescence Devices
Magnetic and Transport Properties of Nanostructured Sr2Fe1-Xcrxmoo6 Double Perovskite Compounds
A Novel Method for Pulse Integration in Radar-Probing System
NC Processing Network Platform RS-232-C Interface Circuit Design
An Analytical Model for Field-Plate Optimization in High Electron Mobility Transistor
Diagnosis of Stator Winding Inter-Turn Circuit Faults in Induction Motors Based on Wavelet Packet Analysis and Neural Network
Theoretical Analysis of Power Transfer Performance of Primary and Secondary Compensation Topology of Inductive Coupled Power Transfer System
Effects of Oxygen Partial Pressure on the Sputtered Hafnium Oxide Thin Films for Resistive Random-Access Memory
Evaluation and Optimization of Grid Patterns of Silicon Solar Cells by Diode and Series Resistance Model
Inverter of Hysteresis Current Control Basing on a New Single-Polar SPWM
Synthesis of Source Powder for SiC Crystal Growth Using High Purity Silicon and Carbon Powder
Write-Once Optical Recording Property of Amorphous WO3 Thin Film and its Relative Mechanism
Double-Side Digital Display Devices Based on the Solid-State Electrochromic Effect of the Amorphous WO3 Thin Films
Chapter 2: Optical Materials and Devices
Frequency Doubling and Polarization Coupling Using Birefringence-Phase-Matching and Quasi-Phase-Matching Simultaneously in Single Optical Superlattice
Spectrum Study of Crystal Fe: LiNbO3 in Infrared-Visible-UV
New Low Emissivity Coating on Cenospheres by Electroless Plating
A Venation-Like Groove Structure of Vertical GaN-Based Light-Emitting-Diode Analyzed by the Monte Carlo Photon-Tracing Method
Formation and Mechanism of Ag/Cu Nanoparticles in Silicate Glass via Ion-Exchange and Reduction Treatment
High Energy, High Efficiency Nd: Glass Regenerative Amplifier
Failure Mechanisms Research of CCD Imaging Devices Induced by Pulsed Laser
High-Gain Laser Diode Array Side Pumped Nd: Glass Rod Amplifier
The Influence of Ring Inside-Laser Coaxial Powder Feeding Process Parameter on Forming
Analysis for the Reflection of Objects in the Water Based on MATLAB
Laser Impulse Detection System Based on Piezoelectric Film Sensor
All-Solid-State High Beam Quality 1053nm Nd: Glass Amplifier at Repetition Frequency
Heterodyne Laser Doppler Radar Based on Er-Doped Fiber Laser
High Beam Quality All-Solid-State 1053nm Nd: Glass Amplifier Shaping by LCSLM at Repetition Frequency
Mathematical Modeling and Simulation Based on the Light Particles Doctrine
Optical Properties of Ba2-XSrxSiO4: Eu2+, Dy3+ Phosphors and their Applications for White LED
Single LD Pumped Nd: YAG Intra-Cavity Frequency Doubling Blue Pulse Lasers
Characteristics of Femtosecond Laser Interaction with the Two-Level Atom System in Optical Materials
All-Fiber 40GHz Femtosecond Pulse Train Source
Chapter 3: Mechanical Engineering and Applications
One Test System Design of Static Stiffness for Machine Tools
Vibration Characteristic Analysis and Research of High Speed Dynamic Balancing Machine
Application of Numerical Simulation and Optimization on Tensioner Pulley Bracket
Based on Quadratic Equations of Tyre Lifting Mechanism before Connecting Rod Combined-Type Modeling Method
Realization of the 3D Simulation Model of the Hui-Quan Substation
Research on a Peristaltic Micropump with Normally Closed Valves Driven By Vacuum Pressure
State of the Art in Finite Element Analysis Technology
Analysis of Bridge Design Based on Three-Dimensional Space
The Rotor’s Modal Analysis of the Vertical Shaft Impact Crusher
The Calculation of the Rotor Critical Speed of Turbopump
Stress Analysis of Cross Wedge Rolling for Alloy Steel with Three-Dimensional Finite Element Simulation
The Further Exploration of Applying Small-Strain and Large-Strain Formulations to SMA
Estimates and Control of Diffeomorphisms in Contact Dynamical System
Compensation for Geometric Parameter Errors of a Picking Manipulator
Free Vibration Analysis of Plates on Winkler Elastic Foundation by Boundary Element Method
Vertical Shaft Impact Crusher Wear Theory Research
Analysis of Acoustic Performance of Compound Muffler by Finite Element Method
Perturbation Analysis of Diffeomorphisms in Contact Dynamical System
Chapter 4: Technology and Processes: Applications, Equipment and Researching
Human Ear Recognition Using Hybrid Filter and Supervised Locality Preserving Projection
Analysis about Application of Modal Bra in Summer
The Design of Measurement and Control System for Condition of Stored Grain
Study on the Color Fastness to Light of the Natural Fiber Fabric
Comparative Study of Human Gait by Using Video Motion Capture System
The Exploration of Dynamical Model and Control Analysis Based on DOF Small Scale Helicopters
Matriptase Sensitive Gold Nanoparticle Probe for early Cancer Detection
Distribution Network Reconfiguration with Distributed Generation Based on Cloud Genetic Algorithm
Application of Dual Frequency IP Method in Southern Peru Copper Deposit Exploration
NC Lathe Cutting Force Measurement Method and Application of Online
Detection and Analysis of Stator Winding Inter-Turn Short Circuit Fault in Permanent Magnet Linear Synchronous Motor
Design of Compound and Intelligent Fire Detector
Data Acquisition of BZD Low Burst and Intelligent Protection in the Mine
Design of Finite State Machine Based on VHDL
Application of PID Control Based on Repetitive Compensation in Transmission System of Double-Side Blade Grinding Machine
Design and Implementation of Automatic Schematics Verification Platform
Risk Management of Building Engineering Based on SVM
Temperature/Humidity Control System Based on Micro Controller Unit in the Room of Bikram's Yoga
Modern Manufacturing Enterprises Heterogeneous Data Integration System Based on Web Services
Research Progress on Non-Invasive Glucose Monitoring Based on Reverse Iontophoresis
Study on the Evaluation of Dairy Products Quality Properties Based on the Electronic Tongue
The Calculation of Photovoltaic System Generation Access Capacity in Distribution Network Based on Probabilistic Power Flow and the PSO Optimization
Study on Decolorization of Sugar Cane Juice Using Activated Carbons
NC Lathe Cutting Force Signals Online Monitoring System Design
Decision-Making Model of War-Time Equipment Supply Based on Projection Pursuit Method
Selective Wet Etching Characteristics of Aginsbte Phase Change Film with Ammonium Sulfide Solution
Design Ethics Based on Advanced Manufacture Technology
Application of Hole by Hole Blasting Technique in the Foundation Pit Excavation
CO2 and H2O Capture from High Humidity Flue Gas by Single Multi-Layer Vacuum Swing Adsorption Unit
The Design and Implementation of Parallel Algorithm Accelerator Based on CPU-GPU Collaborative Computing Environment
Research on Non-Planar Roughness Based on Laser Speckle
Development and Application of Virtual Instrumetation Platform Based on Labview
Research on the Technical and Economic Evaluation Model of Energy-Saving Buildings
System Design of PC-Based Automotive Electronic Control Failure Diagnosis
Quality Management Information in Auto Manufacturing Process
Study on Storey Dynamic Control of Laser 3D Deposition Process Based on PMAC
Study on Short Carbon Fiber Asphalt Concrete Marshall
Temperature Check and Control System Based on Micro Controller
Design of Brushless DC Motor Control System Based on ARM
Fault Diagnosis of Construction Elevator Based on Fuzzy Recognition
Study on the Degradation of Plasticizer Di (2-Ethylhexyl) Phthalate by Advanced Oxidation Process
Blasting Demolition of a Special Structure Storehouse
Rotor Faults Detection in Variable Frequency Motor Based on MUSIC Algorithm
The Development of Haydite Biological Filter by Natural Zeolite Doped with Fly Ash
NC Lathe Cutting Force Signals the Design of the System Test
Research on the Optical Fiber Gas Sensing System Based on the Gas Concentration Measurement
Application of Silicone TQ Resin Reinforced RTV Silicone Rubber in Architecture
Recycle of Materials of Waste Mobile Phones
Analysis and Optimization of Expropriation Business Process of Equipment Mobilization
Temperature Measurement and Control of Fiber Drawing Furnace Based on Virtual Instrument
Petroleum Sulfonates as Oil Displacement Agent and Application
Chapter 5: Applied Materials
Study on Surface Infiltration Casting of Low-Carbon Ductile Iron
Reducibility of Oxide-Ion Conductors La2Mo2-Ywyo9
Photocatalytic Degradation of Methyl Orange on Ce-TiO2 under Visible Light Irradiation
Resonance Escape Factor and Abundance of Plasma Li I Resonance Lines at 671nm
Preparation, Characterization, and Photocatalytic Property of N-La Co-Doped TiO2 with Visible Light Response
Large Scale Synthesis of Silver Nanowires with High Aspect Ratios by Glucose and Fe3+
Mix Proportion Design of Acid Pink 3B Fluorescent Magnetic Powder Based on Orthogonal Theory
Hyperbranched Polyether and Polyether-Urethane Composites with Interpenetrating Networks
Synthesis and Characterization of a Novel Folate-Conjugated Themoresponsive Micelles
The Study of the Oil Unit Connectivity for Microscopic Displacement Efficiency by CT Scan
Escape Factor and Transition Probabilities of Plasma Mg II 280nm Line
Study on Compositions in Aqueous Phase of Hollow Fiber Composite Nanofiltration Membrane
Analysis and Application of Nano TiO2 Photocatalytic Properties
Adsorption Kinetics and Isotherms of Cu (II) and Cd (II) onto Oxidized Nano Carbon Black
Mixture Normal Distribution for Gibbs Sampler and its Application in the Surface of Single Crystal
Magnetostriction and Hysteresis of Tbdyhofe1.95 Alloys
Study on the Preparation and Characteristics of Calcium Carbonate/Polyvinylidene Fluoride (CaCO3/PVDF) Hybrid Membrane
