Buch, Englisch, 990 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
Buch, Englisch, 990 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
ISBN: 978-3-03785-514-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface and Committees
Chapter 1: Advances in Composites Materials
Effect of Process Parameters on Defect Formation in Friction Stir Processed 6082-T6 Aluminium Alloy
Verification of Accelerated Methods for Determining the S-N Curve
Effects of Atmospheric Conditions on the Mechanical Properties of Tires
Hypothesis of Local Zones with Dependent Fatigue Damages Accumulation
Experimental Research on Acoustic Emission of Granite under Uniaxial Compression and Splitting Tensile
The Characteristic Features of Composite Materials Specimen’s Static Fracture Investigated by the Acoustic Emission Method
Mesoporous Activated Carbon Prepared from Bamboo by One-Step CO2 Activation Used for Puerarin Separation
The Microstructure and Hardness of Al2O3 Particle Reinforced Composite
Overall Mechanical Properties of Particulate Porous Composites Following Two-Step Homogenization Scheme
An Empirical Model of Ribbed Cylindrical Glass Reinforced Plastic Tanks
Surface Quality and Dust Analysis in High Speed Trimming of CFRP
Elastic and Plastic Stress Analysis of Composite Beams under Distributed Load
A Semi-Analytical Model for Buckling of Laminated Plates with the NKQ Method
Effective Mechanical Properties for Composites with Three-Phase Randomly Distributed Aggregates Predicted by Multi-Step Mori-Tanaka Method
Multiple Nonlinear Regression Analysis for the Prediction of Macroscopic Elastic Properties on Composite Containing Interphase
Research and Simulation on Strengthening Steel Structure with Carbon Fiber Sheet
Reconfiguration of a Milling Machine to Achieve Friction Stir Welds
Quasi Static Analysis of Anti-Plane Shear Crack
Quasi Static Fracture – Global Minimizer of the Regularized Energy
Analysis on the Friction Performance of the Bionic Surface with the Convex Domes for Increasing Friction
Evaluation of Delamination in Drilling Rice Husk Reinforced Polyester Composites
The Element Free Galerkin Method for Fully Developed, Open-Channel Magnetohydrodynamic Flow
Chapter 2: Nanomaterials, Functional and Biomedical Materials
Dynamic Response of an Electro-Rheological Sandwich Beam with Different Elastic Layers Subjected to Simultaneous Impact Loads
Design of a Microstrip Antenna Based on the Magnetoelectric Composite Material
Thermophysical Properties of Nanoparticles-Phase Change Material Compositions for Thermal Energy Storage
Architectural Application of Smart Materials for Non-Flexible Structures Made by Flexible Formworks
Smart Surveillance System Detection Using PCA- Based Feature Extraction
Biomechanical Study of Lumbar Spinal Fixation Device
Investigating the Effect of Gripping on Upper Limbs Muscles by Modeling and Electromyography Test
Comparative Study of Mechanical Properties of Bone Tissue Based on the CT and the µCT Slices
Studies on Post-Yield Behavior of Cortical Bone
Microstructures and Various Properties of Hot-Extruded Mg-Zr-Ca Alloys for Biomedical Applications
Chapter 3: Aerospace Engineering, Air Vehicles and Navigation System
Design and Development of an Integrated Flight Planning and Rehearsal System Based on GIS and Navigation Database
Effect of Nose Tip on Wing Rock of Slender Delta Wing
Research on Airplane BOM Management Based on Single Source of Product Data
A Novel Design in Micro-Air-Vehicle: Flapping Rotary Wings
Nonlinear Hierarchy-Structured Predictive Control System Design for Hypersonic Flight Vehicle
Friction Stir Spot Welding Technology and its Application in Aerospace Industry
Application of Fuzzy Adaptive Fusion Algorithm in INS/BNS/GPS Integrated Navigation System
Chapter 4: Aero-, Hydrodynamics and Wind Tunnel
Experimental Investigation on Supersonic Jet Screech Tones
Effect of Wind Directions on the Thermal Performance of Three Aligned NDDCT: Parallel and Perpendicular Directions
Influence of Tip Clearance on the Turbulent Aerodynamics of Axial Flow Fan under off Design Conditions
Investigation of Transient Shock Wave in Supersonic Wind Tunnel
Estimation of Skin Friction Drag on a Model in Hypersonic Shock Tunnel
Numerical Investigation of Hypersonic Double-Cone Flow
Studies on Aerodynamic Characteristics of Dump Diffusers for Modern Aircraft Engines
Numerical Wind Tunnel Simulation of Wind Loads on a Solar Photovoltaic Power Generation Station
Flow Velocity Investigation by Particle Image Velocimetry in Supersonic Air Ejector
Influence of the Curved Ground Surface on the Lift of Flat Plate Airfoil
Dynamic Impact Behavior of Water Droplet on a Superhydrophobic Surface in the Presence of Stagnation Flow
Layer Thickness Variation in Two-Phase Flow of a Third Grade Fluid
A Two-Phase Flow Model with VOF for Free Surface Flow Problems
Theoretical and Experimental Study on Oil-Water Two-Phase Flow in a Downhole Venturi Meter
Study of Numerical Evaluation about Kinestate of Mixed Particles in Rectilinear-Flow Pneumatic Conveyance
Capillary Force in the Particle-Particle-Substrate System
Chapter 5: Advances in Rocket and Space Engineering, Technology
Range Prediction and Trajectory Correction of Long Range Rocket with Attitude Stabilization
Research of Pipeline Fault Diagnosis for Liquid Rocket Propulsion System
Air Breathing Rocket Engines and Sustainable Launch Systems
Studies on Ignition Delay and Flame Spread in High-Performance Solid Rocket Motors
Advanced Space Launching Mechanism
Making an Outer Space Adventure by Means of the Periodic Return of Halley Comet
A Fault Isolation Method Based on Analytical Redundancy Relations for Spacecraft Propulsion System
Discharge Characteristics of a Laser-Electromagnetic Coupling Plasma Thruster for Spacecraft Propulsion
Studies on Gravity Influence on Solid Propellant Burn Rate
Design Algorithm for Upper Stage’s Attitude Control System
Influence of Electrode Flare Angle on the Performance of Pulsed Plasma Thruster
Fault Diagnosis Method Based on Integration Signed Directed Graph with Quantitative Knowledge
Chapter 6: Robotics: Modelling, Simulation etc.
A Kinematic Model for Volumetric Error Estimation of a Special Purpose CNC Machine
Development of Efficient Tactile Sensing System for Humanoid Robotics
A New Method for Precision of a Serpentine Snake-Like Robot
Robot Manipulators: Modeling, Simulation and Optimal Multi-Variable Control
Autonomous Laser Guided Vehicle for Book Deposition in a Library
Experimental Study of Non-Contact Robot Gripper for Food Industries
CBR Based Collision Avoidance Approach to Reactive Control for Multi-Robot System
Performance Optimisation of Mobile Robots for Search-and-Rescue
Improved Hough Transform Applying in Mobile Robot Vision Navigation
A Method for Solving Dynamic Equations of a 3-PRR Parallel Robot
Robustness Compensation Control of Simulation Loading System Based on Secondary Regulation
Chapter 7: Vibration Analysis and Measurement
A Homogenization Procedure for Nonlinear Free Vibration Analysis of Functionally Graded Beams Resting on Nonlinear Elastic Foundations
Micro-Vibration Analysis and Measurement on High Resolution Remote Sensing Satellites
Localization and Identification of Vibroacoustic Sources of Gear Transmission Mechanism by Inverse Frequency Response Function
Reaction Wheel Disturbance Characterization by Analysis of Micro-Vibration Measurements
Vibrations of a Non Jeffcott Rotor with One Non Linear Bearing
The Study of the Effect of the Blade’s Aspect Ratio and Thickness on Rotating Vibration
Model Predict Vibration and Noise of Disc Brake
Dynamics of Cantilever Beams due to Time-Dependent Excitations and their Suppression
Chapter 8: Simulation Studies of Various Systems
Detailed Investigation of Detached-Eddy Simulation for the Flow Past a Circular Cylinder at Re=3900
Simulating the Granular Materials Flow in Rotary Kilns
Hardware-in-the-Loop Simulation and Flight Experimentation of the Control System on a Small Solid Rocket
Simulation and Optimization Analysis of External Spur-Gear Pump Shell
Direct Computational Method for Life Prediction of UD Fibre Reinforced Polymers Based-on Plasticity-Damage Simulation
Computational Simulation of Small Punch Test
Numerical Simulation of Gel Propellant Droplet Breakup in Airflow
Dynamic Simulation on Shock Excitation Hydraulic System with Rotary Valve Based on AMEsim
The Constant Pressure Gas Supply Control System and Characteristic Simulation to Air Compressors Based on Fuzzy Self-Tuning of PID Parameters
Helicopter Maneuver Flight Simulation and Control Law Design
Pressure Control Characteristics Simulation Research of Electro-Hydraulic Proportional Variable Pump
ADAMS/MATLAB Co-Simulation: Dynamic Systems Analysis and Control Tool
An APIm Algorithm to Solve the Scheduling Problem in an FMS with Presence of Breakdowns
Tube Hydroforming Analysis Based on Ansys
Chapter 9: Modelling of Systems
Modelling Aerodynamics Unsteady Loads on the Horizontal Tail Plane of a Civil Aircraft
Modeling of Layering Ceramic Shell Mould
Modeling Approach of a Near-Space Airship Using Newton-Euler and Lagrangian Formulation
Developing a Dynamic Model for Unmanned Aerial Vehicle Motion on Ground during Takeoff Phase
Modeling of Planar Embedded Cracks of Arbitrary Shape under Non Uniform Mode I Loadings
Algebraic Modeling for Dynamic Gates in Dynamic Fault Trees
Dynamic Fault Trees Analysis for Importance Measures Based on Cut Sequence Set Model
Modeling of Urea-Water Solution Injection Spray in SCR System
Area Symbol Model for GIS Based on AutoCAD
The State of the Art in Energy Consumption Model – The Key to Sustainable Machining
Chapter 10: Optimization Techniques
Quality Prediction in Complex Industrial Process with Support Vector Machine and Genetic Algorithm Optimization: A Case Study
Thermoeconomic Approach and Optimization of a Solar Thermal Power Plant
Influence of Optimization Algorithm on Airfoil Shape Optimization of Aircraft Wings
On the Optimization of Vent Arrangement in a Subway Station
3-D Path Planning for UAV Based on Chaos Particle Swarm Optimization
Research and Simulation on Optimization of Phase Noise in Crystal Oscillators
The Design and Optimization of Fuzzy Controller Based on Vibrating Mill Granularity
A Comprehensive Approach for Thermal Error Model Optimization for ANN-Based Real-Time Error Compensation in CNC Machine Tools
Optimal Trajectory of Flexible Manipulators Using Genetic Algorithms
Chapter 11: Applications of Neural Network and Finite Element in Materials
Predictions of Scratch Characters for Engineering Material by Using FEM and Abductive Network
Optimize the Satellite Orientation by Using the Inertial Pulse Method, Intelligent Damper, Dynamics, Kinematics and Proper Neural Network
Detection of Mechanical Defects by Neural Networks “Experimental Analysis”
Global Stability Properties for Neutral-Type Hopfield Neural Networks
Modal Stress Intensity Factor Using Extended Finite Element Method
Stress of a Rocket Turbine under Different Loads Using Finite Element Modeling
Magnesium Alloy Stent Expansion Behavior Simulated by Finite Element Method
Research on Authentication-Based Security Technology for Complex Networks
Dynamic Response Analysis of a SRM Incorporating Frequency-Dependent Modulus Using Iterative Approach
Data Acquisition and Power Forecasting of Trans-Regional Wind Farm
Dynamic Stress Intensity Factor Computation by Using Xfem Formulation
Chapter 12: Heat Transfer, Heat Engines, Thermal Systems, and Fuels
Integrated Thermal Management System Design for Advanced Propulsion System
Study of Induction Heating Process Applied to Internal Gear Using 3D Model
Sensitivity Study of Temperature Profile of 4340 Spur Gear Heated by Induction Process Using 3D Model
Numerical Simulation of Phase Change Thermal Storage in Finned Double-Pipe Heat Exchanger
A New Approach about Heat Transfer of Hot-Wire Anemometer
The Design of the Pre-Heater of Gas-Operated Hot-Water Heater
Heat Transfer Study in Oil Channels of a Power Transformer Winding ONAN Cooling System with and without Insulating Paper Based on Numerical Modeling
The Interior Ballistic Research for Gas-Steam Launching System with Water Injection in Block
A Numerical Study on Heat Transfer and Lubricant Depletion on an Anisotropic Multilayer Hard Disk
Application and Research of Feedforward Control in Boiler Control of Supercritical Thermal Power Generating Unit
Augmentation of Convective Heat Transfer of Highly Viscous Fluid within Three-Dimensional Internally Finned Tube
Study of Hydrogen-Air Flame Stability with Different Initial Pressure
The Features of Microwave Thermal Conversion of Oil Sludge
A Micro Gas Turbine Fuelled by Methane-Hydrogen Blends
Hex Turbofan Engine
Study on Damage of a Floating Roof-Type Oil Storage Tank due to Thermal Stress
Experimental Study on the Laminar Cooling Process of the Middle and Heavy Plate
Microbial Fuel Cell for Sustainable Electricity Production from Seafood Wastewater
Chapter 13: Automotive Engineering and Under-Water Technologies
Analysis of a Roll Cage Design against Various Impact Load and Longitudinal Torsion for Safety
Knowledge Based Engineering Optimization and Interoperability: An Automotive Case-Study
Experimental Validation and Adjustment of the Semi-Active Suspension Numerical Model Incorporating a MR Damping
Experimental Determination of Vehicle Lateral Drift Characteristics under Laboratory Conditions
Automated Car Seed Limiter for Cars With Electronic Fuel Pedal
Research on Vehicle Longitudinal Following Control Modeling and Collaborative Simulation
Research on Integrated Assembling Technology of Passenger Vehicle Clutches Cover Assembly
CFD Simulations for Hydrodynamic Derivatives of High Speed Underwater Vehicle
The Electrochemical Principle of Measuring Underwater Electric Field
Calculation of Friction Coefficients in Journal Bearings to Determine the Turning Gear Motor Power
Stresses Induced in Saturated Asphalt Pavement by Moving Vehicles
Analysis of All Terrain Vehicle (ATV) for Impact Loading and Roll over Considering the Safety of Occupants
Chapter 14: Reliability and Reverse Engineering
Structural Damage Detection of Jointed Frame Structures Using Chaotic Excitation and Attractor Analysis
Fatigue Reliability of Selective Laser Sintered (SLS) Components Using Weibull Analysis
Reliability of Fused Deposition Modelling (FDM) Components on Fatigue Cycles to Failure Using Weibull Analysis
A Trimming Method of Experiment Based on Reverse Engineering
Mesh Denoising Based on Spherical Wavelets in Reverse Engineering
A New Modified Back-Propagation Algorithm for Forecasting Malaysian Housing Demand
Chapter 15: Miscellaneous Researches of Technical Interest
Analysis of Companding Techniques Applied to Onboard Telemetry Systems
Adaptive Building Envelope System Using Parametric Camshaft Mechanism for Sustainable Building
Mechanics Analyzing of Suspended Formwork Supporting System and Research of Decision System in Constructing Transfer Storey Structure of Steel Reinforced Concrete
Design and Analysis of a Ultrasonic Sliding Platform
Influence of pH on Cadmium Removal from Wastewater by SSI
Tribological Behaviour and Metallographic Study of Al 2014 Alloy Reinforced by SiC Particle
Application of High-Linearity Analog Optocoupler in DSP Acquisition Circuit
Structural Nonlinearity Identification Using Perturbed Eigen Problem and ITD Modal Analysis Method
The Kinematics of Eight-Speed Planetary Gear Hubs for Bicycles
Influence of Hole Shape and Pattern on the Prediction of Limiting Strain for Perforated Commercial Pure Aluminium Sheets
Cutting Tool Condition Monitoring in Machining Processes - A Comprehensive Approach Using ANN Based Multisensor Fusion Strategy
