Buch, Englisch, 2160 Seiten, 3-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 4000 g
Buch, Englisch, 2160 Seiten, 3-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 4000 g
ISBN: 978-3-03785-268-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Technik Allgemein Nachhaltigkeit, Grüne Technologien
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Brennstoffe, Kraftstoffe, Explosivstoffe
- Technische Wissenschaften Energietechnik | Elektrotechnik Energietechnik & Elektrotechnik
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Bergbau, Hüttenwesen
- Geowissenschaften Umweltwissenschaften Umweltschutz, Umwelterhaltung
Weitere Infos & Material
Preface and Organizing Committees
Chapter 1: Mineral Prospecting and Exploration
Characteristics of Petroleum Geology and Prediction of Favorable Areas in Jiufotang Formation, Kazuo Basin
Architectural Structure of Channel Sand Bodies in Meandering River and Remaining Oil Tapping Study-as on PI2a of South-Two Area in Sanan Field
Study the Countermeasures of Industrial Water’s Recycling in Shijiazhuang
Evaluating the Need and Potential of Equipping North American Houses with Multi-Zone VAV Systems
The Lifecycle Growth Trend and Demand Prediction of China Copper Industry
Partitioning Prediction on the Risk of Water Inflow of the Roof in Huangling No.2 Mine
Oil and Gas Accumulation Rules and Controlling Factors on Shuang 1 Member in Moliqing Area
Characteristics and Distribution of Insulating Layer and Interlayer in Funing Formation of Gaoji Oilfield
Ultra Low Permeability Reservoir Characteristics and Origin Analysis
Adsorption of Pb (II) from Aqueous Solutions on Expanded Graphite
Skin Effect Correction Method of Multi-Frequency Array Induction
The Flow Units Study Based on Reservoir Architecture
Effect of Fluid inside Casing on Resistivity Logging Response through Casing
Analysis of Aquathermal Pressuring Based on Equation of Liquid State
Identification and Distribution of Lithologic Reservoirs in Permian Formation, Q Area in Zhunger Basin
Current Situation of Tight Sand Gas in China
Interactive Effects of Salinity and Elevated CO2 on Ecophysiological Function of Euhalophyte Suaeda salsa
Research on the Influence of Electrode Trends and Noise Suppression by Inversion Correction Method in Deep Mine Resources Prospecting by CSAMT
Chapter 2: Mining Engineering
The Research on Abutment Stress Distribution and Fracture Characteristics of Coal Seam in Longwall Face
Guided Wave Nondestructive Inspection of Grouted Rock Bolts: Experiment and Numerical Simulation
An Implementing Method of Updating the Coal Mining Area’s DEM by Mining Subsidenc Forecast Data
Optimization and Tests on the Independent Advance of Ore Breaking with High Sublevel and Large Drift Interval
The Research on Reasonable Support Capacity of Workface in Coal Seam with Thin Upper Cover
Analyses of Actual Measurement and Numerical Simulation on Gently Inclined Thin Seam
Preparation System Design of Filling Material with Coal Gangue as Coarse Aggregate
Influence of the Disturbance in the Orthogonal Direction on the Kaiser Effect Using Discrete Element Method
Analysis of the Gas Drainage Method of Roof Tunnel with Downward Borehole
Review of Theory and Practice on Natural Gas Hydrate
Research Progress and Prospect of the Control Technology for Mining Subsidence
The Study of Stress Distribution Law of Roadway Surrounding Rock Heading Advancing Coal Face
Real-Time Observations of Fracturing Processes of Brittle Rock in Compression by X Ray Computed Tomography
Study on Original Coal Seam Permeability Coefficient
Optimization Study on Stability of Dragline Stripping Bench and Mining Parameters of Dragline Stripping Technology
Study on Movement Law of Overlying Strata during Shallow Thinner Seam Mining in Shendong Mining Area
Study and Application on the Parameters of Gob-Side Entry Retaining in Thin Seam with Limestone Roof
Optimization and Application of High Production and High Efficiency Mining Parameters of Fully Mechanized Caving Face
Arch Math Model of Thick Sand Layer Mining Unload Failure in Shallow Seam
Gas Geology Law and Gas Forecast in Yongju Well Field
Test Study on the Multi-Pulse Loading Fracturing Technology for Development of Shallow CBM
Research on the Design for Strip-Partial Mining Method under Villages at Xiaotun Colliery
Research on Deformation Controlling Technology of the Narrow Pillar of Insular Coalface Roadway Driving along next Goaf
Optic Method to Measure the Density of Gas and the Analysis on Uncertainty of Measurement
Study on Mining Techniques for Improving Lump Coal Rate of Anthracite
Stability Effect to Railway Tunnel of Underground Mining Using ABAQUS
Comprehensive Evaluation of the Stability of Coal Mining Subsidence Based on Fuzzy Matter-Element Theory
Analysis of Key Safety Factors Mining Large Section Working Face to Steep Seams
Deformation Simulation of Surrounding Rock at Faulted Zone during Roadway Drivage
Chapter 3: Mineral Process Engineering
Experimental Study on Copper Oxide Ore from Fuxin
Molecular Docking and 3D-QSAR Studies of 4-Phenylpiperidine Derivatives as µ-Opioid Agonists
Preparation of Phosphorus by Carbothermal Reduction Mechanism in Vacuum
Research on the Further Floatation of the Low-Grade Polymetallic Ore
Pollution Source from Gas Stations and Preventive Measures
Study on Technological Mineralogy and the Experimental of Hematite in Fengyang Anhui
Research on the Ultra-Fine Titanium Dioxide Suspension Stability and Fractal
Research of Optimize Performance of Coal Flotation Collectors
Study of Feasibility and Technology of Recleaning Middlings of Coking Coal
Recovery a Refractory Oolitic Hematite by Magnetization Roasting and Magnetic Separation
Research on Mineral Processing Technical of a Gold Ore
Study on the Floatation Effect of ZFC Agent for Difficult Slime
An Empirical Correlation for Maximum Penetration Depth of a Particle Impacting on a Free Surface at its Critical Velocity Condition
The Development of Preconcentration Technology in Low-Grade Magnetite’s Beneficiation
Biological Anaerobic Treatment for Low-Rank Coal Preparation
Study on Synthesis of Nesquehonite Whiskers
Recovering Tail Mine from a Coal Preparation Plant Using Non-Phase-Change Thermo-Compression Drying Technology
The Experimental Research on the Sedimentation Performance of one Molybdenum Ore Flotation Tailings
Chapter 4: Oil and Gas Well Development Projects
Recognition of Fracturing by Stimulated Reservoir Volume (SRV) in Shale Gas Wells
Research and Design of a Spatial Attitude Measurement System for Drilling Tools
Programming Model for Offshore Platforms Site Selection
A New Estimation of Water-Drive Reservoir Production Performance Prediction Based on Radial Fluid Flow
Pressure Transient Analysis of Polymer Injection Wells
Study on Injection-Production Well Connectedness Evaluation Method in Polymer Flooding Reservoir
Experimental Research on the Particles Reflux in the Particle Impact Drilling System
Risk Assessment of Extended Reach Well Based on Gray Matter-Element
Analysis on Microbial Community Structure and Phylogenetics for the Reservoir System after the Microbial Enhanced Oil Recovery
Comprehensive Evaluation for Putaohua Reservoir in Sanzhao Depression
Quantitative Evaluation of Micro Pore Throat Characteristics in Extra Low Permeability Sandstone Oil Reservoir of Yanchang Group in Ordos Basin Using Constant Rate Mercury Penetration Technique
Research on Low-Temperature Dehydration of Crude Oil Based on Paraffin-Based Demulsifier
Calculation Method of Treatment Radius about Water Plugging for Layered-Parallel Beds Model
Comparative Study on Inflow Performance Model of Short Horizontal Wells
Acidizing Radius Design Model for Sandstone Reservoir
Experimental Study on Polymer Microsphere Emulsion Profile Control and Flooding in Heterogeneity of Reservoir
A Grey Relationship Method for Predicting Efficiency of Steam Flooding
A Model with Back-Propagation Algorithm for the Estimation of Irreducible Water Saturation
A Streamline-Based Model of Wuliwan Oil Field Injecting Polymer Microspheres to Enhance Sweep Efficiency of Water Flooding
Experimental and Theoretical Study on Slag MTC Improving the Cementing Quality of the Second Interface
Experimental Study of the Factors Influencing Filtrate Loss of the High-Density Brine Drilling Fluid
Feasibility of Particle Jet as a Drilling Medium for the Development of Deep Complicated Oil-Gas Reservoir
Experimental Study of Anionic Gemini Surfactant Enhancing Waterflooding Recovery Ratio
Limited Entry Fracturing Design and Optimization for Thin-Interbedded Low-Permeability Reservoir
Study on Pumping Units with Wind Power Generation Complementary Power Supply System
Layers Subdivision and Waterflooding Timing in Low Permeability Offshore Reservoirs with Thin Interbedding
Orthogonal Test Design for Optimization of Dispersive Type Cement Slurry Fluid Loss Control Additive Used in Petroleum Drilling
Study the Displacement Characteristics of Foam Flooding after Polymer Flooding on NMR
Test Study and Application of Fracturing Stimulation Technologies with Liquid Powder for Low-Permeability Oil Reservoir in FY Block of Daqing Oilfield
Investigating Particle-Size Effect on Uplift Mechanism of Pipes Buried in Sand Using Distinct Element Method
Sensitivity Analysis of Fracture Affecting Factors in Low Permeable Fractured Reservoir
Key Problems in the Calculation of Minimum Miscibility Pressure Based on Analytical Method
Advance Water-Flooding to Reduce the Stress Sensitivity Affect on Low Permeability Reservoir Development
Study on Properties of Pectinate Hydrophobically Associating Polyacrylamide Solutions
GA-Based Minimum Miscible Pressure Prediction
Study on Combustion Model of the Propellant Used in Oil Composite Perforation
Research on Modeling of Screw Pump Characteristic Mathematical Model
Research on the Correction Method for Measurement Data of WOB while Drilling Based on Strain Analysis
Chapter 5: Petrochemical Engineering
Research on Viscosity Reduction and the Transportation at Atmospheric Temperature for Heavy Oil with Microwave Radiation Technique
A Study on Salt Effect on Treatment of Oily Wastewater Using Microwave Radiation
Chitosan-Mediated Preparation of Porous Amorphous NiB Nanoparticles from Silver-Catalyzed Electroless Plating
Regeneration of Used Vacuum Pump Oil by Furfuryl Alcohol
The Influence of Surfactant Concentration on Rheology and Proppant-Carrying Capacity of VES Fluids
Characteristics and Kinetics of Gaseous Hydrocarbon Generation from Pyrolysis of Crude Oil under High Pressure and High Temperature
Preparation and Characterization of TiO2 Support for Pd Catalysts: Application in Hydrogenation of 4-Carboxybenzaldehyde
Using Biological Treatment of Henan Oilfield -Produced Water: Pilot Plant Test Study
Demulsification of Crude Oil Emulsion Using Propylene Oxide-Ethylene Oxide Block Copolymer
Real Gas Effect on Unsteady Flow of Natural Gases in Shock Tubes
Chapter 6: Metallurgical Engineering
Ni-Based Alloy Coating on Plain-Carbon Steel by Hot Dipping Process
Extraction of Copper and Cobalt from Nickel Chloride Solution with N235
Numerical Simulation of Airflow in Wet Rotating Reticular Plate Electrostatic Precipitator
Research on Thermocouple Embedded Theory for Thermal State of CC Mould Copper Plate with High Casting Speed
Experimental Study on Sulfuric Acid Leaching Behavior of Chromite with Different Temperature
