Buch, Englisch, 1022 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1860 g
Collection of selected, peer reviewed papers from the 2014 International Conference on Energy Science and Applied Technology (ESAT 2014), December 20-21, 2014, Daqing, China.The 223 papers are grouped as follows:Chapter 1: Technologies in Geology, Mining, Oil and Gas Exploration and Exploitation of Deposits;Chapter 2: Renewable Energy, Bio-Energy and Fuel Cell;Chapter 3: Materials and Chemical Technologies;Chapter 4: Environmental Engineering and Sustainable Development;Chapter 5: Construction and Structural Engineering;Chapter 6: Thermal Engineering, Researching and Designing of Machines and Mechanisms;Chapter 7: Power and Electrical Engineering, Mechatronics and Control;Chapter 8: Communications and Applied Information Technologies;Chapter 9: Applied and Computational Mathematics, Methods and Algorithms Optimization and Data Processing;Chapter 10: Engineering Management in Industrial Sector
Buch, Englisch, 1022 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1860 g
ISBN: 978-3-03835-416-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik
- Technische Wissenschaften Energietechnik | Elektrotechnik Energietechnik & Elektrotechnik
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Technologies in Geology, Mining, Oil and Gas Exploration and Exploitation of Deposits
Productivity Model and Production Decline Characteristics of Multi-Fracturing Horizontal Well
Influencing Factors Analysis of Iron Ore Tailings Comprehensive Utilization
Connotation of Iron Ore Tailings Comprehensive Utilization
Horizontal Well Penetration Rate Increasing Technology in Sulige Gas Field
The Study of High Capacity Channels Genesis and Formation Conditions in Block M Liaohe Oilfield
Screening of Polymer-Producing Bacteria for Microbial Combination Flooding in Thick Oilfield
The Law of Reservoir Property Change both before and after Water Flooding in Liaohe Oilfield
Jixi Basin CBM Accumulation Condition Analysis
Main Controlling Factors of Hydrocarbon Accumulation at Different Phases: A Study on the Main Fault Depression Zones of Central H Basin
Research and Application of Multi-Slug and Equi-Fluidity Oil Displacement Mechanism
Based on the Sedimentary Facies of the Low Porosity and Permeability Reservoir Water Flooded Layer Qualitative Interpretation Method
Research of Retarded Acid Formula System of Putaohua Reservoir
Research of the Impurities Causes in Water Injection Well in Longhop Oilfield
The Experiment of Viscosity Loss Caused by the Polymer Flow along Transportation Pipeline
The Study of the Relationship between the Thickness Combination of the Well and Liquid Production per Unit Thickness
Experimental Study on Improving the Rate of Antimony Ore Grade and Recovery of Mineral Processing
The Control of Palegeomorphology on Sedimentary Systems in Southeast Qianjiang Depression, Lower Xingouzui Formation, Jianghan Basin
Hydraulic Fracturing Optimization of Offshore Horizontal Well Based on the Optimal Proppant Index
The Local Structure Research on the Nanpu 5th Construct
Sequence Stratigraphic Characteristics of Damoguaihe Formation in the North of Wuerxun Sag
The Type and Characteristics of the First Member of Nantun Formation’s Sedimentary Facies in Wunan Sub Depression
The Application of Facies Modeling Combination of Well Data and Seismic Data in G25-12 Block
Analogy Analysis of Coalbed Methane Reservoir-Forming Conditions in Jixi Basin
Favorable Areas Prediction in Jixi Basin
The Application of Phase-Sensitive Detection Technology in the Lateral Logging
The Tectonic Movement Intensity of Sanzhao Sag and the Influence on Oil Migration
Application of Fractures Prediction Technology in Carbonate Rock Reservoirs
The Uneven Settlement Cause and Settlement Prediction of Xi Ying Sluice
The 3D Visualization of Geological Modeling in Chengbei Oilfield Based on Phased Constraint Conditions
Remote Sensing Prospecting Deposit Model Using Aster Data: A Case Study from Southern Part of Taxkorgan Tajik Autonomous County, China
Application of Cementing Technology for Shale Gas Horizontal Well in Jiaoshiba Block of Fuling Area
Organic Carbon & Nitrogen Stable Isotope Geochemistry of Anthraxolite from Different Fractures in Xiangxi, China
The Accumulation Rules of Budate Burial Hill Hydrocarbon Reservoir of Suderte Oilfield in Hailar Basin
The Slug Design of Multi-Slug and Equi-Fluidity Oil Displacement with Binary Flooding
The Application of Dynamic Development Data in Low-Permeability Reservoir Water Flooded Layer Identification
Application of Inverse Q Filtering Methods in the Near-Surface Compensation
A New Parameterization Method for Large-Scale Reservoir History
Study of Logging Curve Processing Methods in Nanpu 5th Structure Seismic Inversion
Experimental Study on High Temperature-Resistant Gel for Profile Control
Research and Application of the Ore Body Three-Dimensional Mathematical Model Based on Baiyang-Chuanxindong Ore Block in Bainiuchang Mine
Simulation Experimental Study on Aeolotropism Affects the Recovery of Low Permeable Sub Layer Reservoir
Methods of Fault Modeling by Well-to-Seismic Integration
Density Logging Simulation on Enlarger Borehole in Anthracite Reservoir via MCNP
Chapter 2: Renewable Energy, Bio-Energy and Fuel Cell
Performance Analysis of Microbial Fuel Cells with Different Exoelectrogens at Low Temperature
The Study on the Transesterification Catalyzed by Sodium Compound Loaded on Carbide Slag
Analysis on the Fluctuation of Wind Power
A Study of Photovoltaic Power Prediction
Optimization Design of Solar Hot Water System of Splited-Type Villa Type Building
The Research Progress of Earth to Air Heat Exchanger: A Review
A Study of Distributed Photovoltaic Energy Storage Configuration Capacity
The Effects of Initial Conditions on the Composition of the On-Board Fuel Reformation Chamber in an HCCI Engine
Chapter 3: Materials and Chemical Technologies
3.5 G PAMAM-Stabilized CdS/Au Nano-Composites Prepared and Characterized
Progress in Graphene-Based Two-Dimensional Heterostructures and their Photoelectric Properties
Pyrolysis Kinetics of Oil Shale and its Kerogen
Research and Development of Agent for Collecting Aluminum Dross
Research on Migration of Lead in Food Wrap Paper
Research on the Application Status of Giant Magnetostrictive Material in Drive Field
Application Progress of Rare Earth Doping in Solid Electrolyte of Lithium Ion Battery
Fabrication and Photoelectric Properties of La-Doped ZnO Nanofibers via Electrospinning
Effect of Moisture on Physicochemical Properties of Cellulose Studied by Molecular Dynamics
Influence of Niobium Addition in Iridium on High Temperature Plasticity
Preparation and Detection of the Resolution and Number of Theoretical Plates for High Purity Steviosides
Study on Preparation of Boric Acid with Boron Trifluoride Methanol Complex
The Effect of Residence Time on Biomass Pyrolysis of Several in Different Temperature Nodes
Preparation and Application of Basic Magnesium Chloride Whisker
Investigation on Mechanical Properties and Microstructures of Resistance Spot Welded Aluminum-Lithium Alloy (5A90)
Preparation and Characterization of Na7[CoCrW11O39(H2O)]·15H2O for Electrical Conductivity
Chapter 4: Environmental Engineering and Sustainable Development
Application of ICP-AES to the Detection of Heavy Metals in Cordyceps militaris from Shenyang
Research on the Evaluating Method of Non-Renewable Energy Efficiency Based on China's Provincial Data: Green Growth Perspective
Electric Power Industry Energy Conservation and Emission Reduction Policy Analysis
The Evaluation of Low-Carbon Building Based in Whole Life Cycle Theory
Three-Steps Allocation Model of Water Utilization Based on Synergy Theory: Take Y City for Example
Study on the Variation of Landscape Pattern under the Influence of Hydroelectric Development: A Case Study of Madushan Hydropower Station, China
Impact of the Brine Disposal on Scapharca Subcrenata
Low-Carbon Culture Industry Development: The Design of Carbon Dioxide Capturing System for Liquor Cultural Industry
The Change of Environmental in Sewage Sludge Compost
The Present Situation and Development Trend of Sludge Disposal
The Effects on Phosphorus Removal and Membrane Pollution by Adding PAC and Ca2+ into MBR under Different Dosing Methods
Experiments of Combustion Adjustment on Boiler to Reduce NOx Emission
The Predictive Analysis of the Energy Consumption and Environmental Emissions of Urban Passenger Transport of Beijing
Evaluating the Regional Green Innovation Efficiency in China: A DEA-Malmquist Productivity Index Approach
A Study on Early Warning Methods for Major Hazard of Hazardous Goods in Port Logistics Hub
The Environmental Impacts and Ecological Recovery of Hydropower Development
Emergency Treatment Research Based on Oil Monitoring System of Closed Water Ship Pollution
The Inland Ship Anti-Pollution Present Situation and Suggestion
Ground Features of Sea Land Breezes in Hainan Island
A Typical Sea-Land Breeze Process in Hainan Island
Study on the Relationship between Soil Nutrients and the Corn Yield Based on Grey System Theory
Advances in Research of Botanical Insecticide
The Reduction of Haze Weather in the Sight of Solid Waste Incineration
Experimental Study on Removing NO from Flue Gas Using Microwave Irradiation over Activated Carbon
Migration and Accumulation of Cadmium in Paddy Soil
The Influence of Coal-Smoke Air Pollution on the Respiratory Health in Pupils
Study on Regional Analysis of Reference Crop Evapotranspiration Based on SPSS
Influence of Organic Loading Rate on the Process Imbalance of Anaerobic Digestion with Food Waste
Research on Treatment of Rural Household Solid Wastes
Some Numerical Simulations of Circulation in the East China Sea
A Numerical Model of Circulation in the East China Sea
Chapter 5: Construction and Structural Engineering
On Fire Severity of Building in Performance-Based Design
Research Strategies on Sustainable Building Design
Study of Guizhou Province Guanling Daz-Hai Landslide Instability Process under the Rainstorm
Study on Optimization of Anti-Seepage and Drainage System for High Concrete Sand-Gravel Dam
The Numerical Simulation and Deformation Analysis to the Deep Foundation Pit of Diaphragm Wall Based on Midas/GTS
The Nonlinear Finite Element Analysis of the Rigid Steel Column Base Connection with Anchor Bolt under Biaxial Bending
Stability Bearing Capacity of Dendritic Arms in Tainter Gate
Research on the Radial Gate Fluid-Structure Coupling of Hydraulic Steel Gate
The Time to Eliminate the Expansion Joints of Diversion Pipeline in Wanjiazhai Hydropower Station
Chapter 6: Thermal Engineering, Researching and Designing of Machines and Mechanisms
Boiler Air Preheater Plugging Analysis of Grey and Related Problems
Coal Water Slurry Gasifier Burner Service Life Analysis
Numerical Simulation of Gas Pipe with High Temperature and High Pressure
Based on the Research of Wind Turbine Vibration Performance and Aerodynamic Performance
Comparative Research and Design of Precision Hill-Seeder with Whole Plastic-Film Mulching on Double Ridges
Design of a Multifunctional Body-Building Rehabilitation
The Analysis of the Static Mechanics for the Vehicle Frame
The Heating Assembly Method and Application of Fall Off and Interference Fit Joint Flywheel
Installing & Remolding of Air Gun Source to Research Vessel “Yanping 2”
Influence of Air Distribution Modes on Boiler Efficiency
Numerical Study of Dynamic Ground Effect of a Carrier-Based UAV
The Research on Metal Milling about down Milling and Inverse Milling for Application
Kinematics and Dynamics Analysis of a Micro-Robotic Platform Driven by Inertial-Force Propulsion
The Design of Oscillating Hydrofoil Current Generation Device
The Characteristic Research of Inertial Mechanism under the Condition of No Friction Contact
Influence of De-Swirl Angle on the Flow and Heat Transfer in Rotor-Stator Cavity System
The Finite Element Analysis and Optimization of the Hood Based on Hyperworks
Numerical Investigation of Pneumatic Regulating on Low-Pressure Guide Vane
Structure Design of and Numerical Simulation on an Annular Reverse Circulation Drill Bit
An Experimental Flow Study of the Pitching Oscillating Airfoil Using the PIV Technique
Temperature Field Analysis of LNG Tank under Ultra-Low Temperature Based on Finite Element Method
The Portable Unit for the Online Measurement and Fitting of Large Curved Surface
Improvement of Engine Coolant Ultrasonic Cavitation Apparatus
The Research of Hydrodynamic Performance for Ducted Propeller with PBCF
Applications of CFD Technique in the Flow Field Analysis of Road Sweeper
Automobile Modeling Research Based on Numerical Simulation
Finite Element Analysis of Frame of Dump Truck
Numerical Simulation and Optimization of Small Low-Speed Wind Tunnel Contraction Flow
Research on Heat and Mass Transfer of Flat Grooved Heat Pipes
Research on Engine Fleet Management for Civil Aero-Engine
Analysis and Research of Hydraulic Roof Bolter in Performance Testing
Non-Contact Online Detection of Concentricity Error
The Optimization of Group Panel-Type Radiator of Transformer
Study on Improving the Empirical Formula of Calculating Francis Turbine’s Axial Hydro-Thrust
Based on GT-Power Car Muffler Design and Development
Chapter 7: Power and Electrical Engineering, Mechatronics and Control
On the Motor Noise Testing System Based on LabVIEW
Study of Bifurcation and Chaos in the Current-Mode Controlled Boost DC-DC Converter
Design and Realization of a New Intelligent Capacitive Load Switch
Study on Power Flow in Distribution Network with Photovoltaic Power
The Design of Adaptive Ambient Noise Sound and Light Controlled LED Lamp Based on Integral Mode V-PWM Converter
Control System Design of Climbing Robot Based on PLC and SCM
Design of Boring Machine Electrical Control System Based on Omron PLC
A Global Thresholding De-Noising Method for Power Quality Signals
Design of Control Terminal for Water Quality Detection Based on the Beidou Satellite Navigation System
Hardware Design of Electronic Parking Brake System
The Research and Development of Motor Cooling Control System Based on Electronic Parking Brake Test Bench
Study of Supercapacitors Based on Nanomaterial’s of Novel Architectures
Single-Phase Independent Droop Control Strategy in Low-Voltage Microgrid
Grid Connected Photovoltaic Simulation System Based on TMS320F28027
A Novel Energy-Harvesting Active Radial Bogie for Railway Vehicles: Design, Simulation and HIL Test
A Study on the Use Cases of the Smart Grid Home Energy Management System
The Application of Saving Energy and Reducing Consumption System in an Electric Power Group
Design of Belt Conveyor Control System Based on Motion Controller
Implementation of the Li-Ion Battery Management System Based on DS2438
Blasting Hole Recognition and Location Based on Machine Vision
The Research and Design of Multi-Functional Intelligent Tourniquet
Analysis and Suggestions for Power Supply Reliability Assessment Index of Distribution Network
Research on Maintenance Platform of Video Optical Detection
Clustering Routing Algorithm for Heterogeneous WSN with Energy Harvesting
ROS Based Voice-Control Navigation of Intelligent Wheelchair
Research and Realization of Simulation for Automobile Steering Resisting Torque
Research and Simulation of ABS Control Method
A Study on Digital Model and Simulation Method of Pulse Doppler Fuze
PID and Velocity Feedback Control for ABS Based on Wheel Slip
Modeling and Simulation of a Hydro-Pneumatic Accumulator System for Hybrid Air Development
Chapter 8: Communications and Applied Information Technologies
Research on Communication Lines Detection in WAMS
Design of Mine Communication Module Based on Power Line Carrier and CAN Bus
An Optimal Resource Allocation Algorithm in Cloud Computing Environment
A Flexible Workflow Model of Role Based Access Control
Research on the RFID Antenna Screen Printing Technology
VOR Navigation Receiver Repair Technology Research
Analysis of the Application of the Internet of Things Technology in Environmental Monitoring
Research on the Effect of the Relative Speed of the Performance in Bidirectional Traffic Stream
Architecture and the Key Technologies of Medical Equipment Management System Based on the Internet of Things
RETRACTED: A Study on the Application of Deconstructing Byzantine Fault Tolerance
OMA DRM-Based Key Management Protocol for IPTV
The Research on Monitoring System Design and Implementation for the Network Security
Design and Implementation of Fire Multi-Level Menu for Office Automation Platform Based on Communication Technology
Research on the Construction of Digital Library Virtual Environment Based on the Cloud Computing Technology
Research on the Application of Chinese Search Engine
Analysis of MIDI Audio Files Based on Method of Information Quantity Estimation
Structural Parametric Modeling and Analysis of a Ship Stiffened Deck Plate Based on the Patran Command Language
Optimization Analysis of Supply Logistics in Automobile Manufacturing Based on Internet of Things
Design and Implementation of Meteorological Observation Instrument Virtual Assembly System Using Blender
An Optimized Low-Power-Consumption Tracking Algorithm Based on Navigation Message Structure for Weak Signals
Chapter 9: Applied and Computational Mathematics, Methods and Algorithms Optimization and Data Processing
Calculations for the Number of Titanic Sets
Suffix Tree Constructing Algorithm for Datasets with Discrete Contents
A Kriging Model-Based Approximation Technique for Predictive Design
Solving Computational Expensive Problems with a Response Surface Surrogate Models
Surrogating for High Dimensional Computationally Expensive Multi-Modal Functions with Elliptical Basis Function Models
Study on Approximation Methods with Chebyshev Polynomial Models
Extraction of Inertial Parameters Based on 3D-Voxel Model of Equal Volume
Application of the Combination Prediction Model in Forecasting the Short-Term Wind Power
Application Research on Improved Fusion Algorithm Based on BP Neural Network and POS
Group Synchronization Analysis of Network by Matrix Theory
Harmonic Analysis Based on Modified Hyperbolic S-Transform
Statistical Inference and Application for Partially Linear Models
Analysis of Extreme High-Temperature Time Series Based on Empirical Mode Decomposition
The Kalman Filter Cuckoo Search Algorithm to Solve the TSP Problem
Matlab Implementation in ZOOM FFT Technology Based on Analytic Signal and Band-Pass Filter
Improved LSB Algorithm of Image Hiding Based on Randomness
3D Model Retrieval Based on Distance Classification Histogram
Object-Based Multi-Feature Classification of High Spatial Resolution Remote Sensing Image
Adaptive Synchronization of a Stochastic Fractional-Order System
Chapter 10: Engineering Management in Industrial Sector
Evaluate the Efficiency of Chinese Regional Quality Development Based on DEA and Malmquist Index
The Research on Electric Power Enterprise Trainer Management System
Study on Innovation Strategies of China Petroleum Supply Chain Optimization
Based on the Identification and Location Quotient Measure Law CES Yulin New Energy Industry Clusters and Analysis
The Research of Supply Chain Optimization Theory Based on Service-Oriented Manufacturing
Safety Management Pattern for Equipment Complex System
Development of High-End Agriculture Based on Dynamic Diamond Model
Analysis of Technique-Economy Studies of Branch System Calculation Method
Based on ARCGIS-SDE Spatial Evolution Trend of Industrial Clusters Space
An Overview of the Energy Systems Allocation Model under Uncertainty
The Feasibility Analysis and Development of the PET Regenerated Staple Fiber Industry
Theoretical Framework and Research Case of the Energy Enterprise Internal Auditing Management System’s Innovation and Upgrade
