Zhang / He | Advances in Materials Science and Engineering | Buch | 978-3-03785-599-7 | sack.de

Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

Zhang / He

Advances in Materials Science and Engineering

Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), December 9 - 10, 2012, Seoul, Korea
Erscheinungsjahr 2013
ISBN: 978-3-03785-599-7
Verlag: Trans Tech Publications

Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), December 9 - 10, 2012, Seoul, Korea

Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

ISBN: 978-3-03785-599-7
Verlag: Trans Tech Publications


The volume contains selected, peer reviewed papers from the 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), December 9-10, 2012, Seoul, Korea. The papers are grouped as follows: Chapter 1: Materials Engineering; Chapter 2: Mechanical Engineering; Chapter 3: Mechatronics and Control; Chapter 4: Manufacturing Processes; Chapter 5: Civil and Environmental Engineering;Chapter 6: Product Design and Engineering Management.
Zhang / He Advances in Materials Science and Engineering jetzt bestellen!

Autoren/Hrsg.


Weitere Infos & Material


Preface and Organizing Committee
Chapter 1: Materials Engineering
The Synthesis of Ag Doped TiO2 Powders and Enhanced Photocatalytic Activity for Degradation of Organic Dye in Waste Waters
Investigation on the Microstructures and Tensile Properties of TA15 Titanium Alloy Thick-Wall Parts Formed by Laser Rapid Forming Process
Formation of Titanium Oxide by Thermal-Electrochemical Process on the Blasted Titanium Alloys Substrate
Characterization of ZnO Thin Films Fabricated by Atomic Layer Deposition with Various Temperatures
Mo Content on Wood Colored Electro-Less Plating Ni Color Influence
Structural and Electronic Properties of ZnO NANOCLUSTERs: A B3LYP DFT Study
Analysis of Nanocrystal of Porous Silicon with High-Resolution Transmission Electron Microscopy
Influence of Particle Size of TiO2 Powder on the Energy Conversion Efficiency of a Dye-Sensitized Solar Cell
Production of Highly Efficient Photocatalytic TiO2 Powders by Mechanical Ball Milling
Fast Detection of Local Anesthetic Ropivacaine by Impedance Method on Polypyrrole-Graphene Oxide
Improved Dark Current Properties in Bi-Layer Structured Organic Photodetectors
Preparation of ß-Phase Silicon Nitride Powders
The Focus of Beam Using Optical Transformation
The Nature of Rest Silanol Groups on the Surfaces of Silica Based Solid Phase Extraction Materials
Simulation of the Hydrogen Permeation Behavior of X80 Pipeline Steels in H2S Saturated Environment by Cathodic-Charging Method
The Effects of Processing Parameter on Melt-Blown Filtration Materials
Recent Progresses on Some Coke Resistant Ni-Based Catalysts for Carbon Dioxide Reforming of Methane
Numerical Simulation for Microstructure Evolution in In718 Alloy During Cylindrical Cup Backward Extrusion
Electrochemical Studies on Photoactively Conducting Poly(4-aminoazobenzene) Coating: Electrochromic Property
Amino-Functionalized Multiwalled Carbon Nanotubes for the Preparation of Electroactive Polyurea Composites with Improved Electrical Properties
Sol-Gel Derived Mesoporous Silica Nanoparticles under Base Catalysis for Uses as Anti-Reflective Coating Layers
Effects of Carbonization Temperature and Nanoporous Silica Templating on the Synthesis of Porous Carbon from Commercial Sugar
Study the Method of the Polyester Short Fiber-Nature Rubber Composite Mix
Simultaneous Removal of SOx and NOx in Flue Gas at Power Stations over a Cu/Na-13X Zeolite Catalyst
Research on the Stability of the Paste-Like Silicone Impregnant
Experimental Investigation on Viscosity of Nanofluids
Experimental Study on Ball-End Milling of C/C Composite
Synthesis of Silicon Thin Film by Electrodeposition from Ionic Liquid
Near Infrared Spectroscopic Study on the Adsorption of Methanol on Silica Gel
The Unique Organic Microfertilizer as the New Prospective Compound for Agroecology
Study and Characterization of TiC/Fe Alloys by Gel-Casting
Electronic Structure of Erbium Silicates Investigated by First-Principles Method
A Neural Network Model of Restrained Recovery for Shape Memory Alloys
Magnetic Field-Induced Granular Pearlite at Early Stages of Phase Transformation
The Effect of Sn on Microstructure and Mechanical Properties of Mg-Li-Zn-Sn Alloys
Synthesis of Silica Microspheres Filler for PDMS
Effect of Isothermal Aging 2000 Hours on Intermetallics Formed between Ni-Pd-Au with Sn-4Ag-0.5Cu Solders
Synthesis, Structural and Photoelectrical Properties of Self-Assembled Gold-Poly(3,4-Ethylenedioxythiophene) Nanowires and Nanocables
Relationship between Binder Content and Ink Absorption of Coated Paper
The Research of the Wc-17co Abrasion-Resistant Coating by the D-Gun System on the Aluminium Alloy Substrate
Stress Relaxation of Ion Exchanged Float Aluminosilicate Glass at Different Temperature
Preparation and Characterization Glass Fiber Reinforced BMI/DABA/KH550 Composite
Fabrication and Characterization of Ag Nanoparticles Loading pH Sensitive Polymer Composite Microspheres
Experimental Study on Adsorption Mechanism of U(VI) by Modified CMC
Photo-Oxidation of PVC-Coated Membrane Material
Degradability Research of Nano-PLLA/Chitosan Composite Scaffolds
The Effects of Natural Dopant Acids on Morphologies and Antibacterial Activity of Polyaniline
T-Ray NDE Inspections on the Fiber Direction of Thermoplastic PPS-Based CFRP Composites
Study on the Leaching Performance of Chrome in Waste Leather Products
Abnormal Diamagnetic Respond in Co0.2Mn1.7Sn Compound
Investigation of Au Nanoparticles Loading Temperature Responsive Hybrid Microgels
Research on Microbial Degradation of Bamboo Lignin for Extraction of Natural Bamboo Fiber
Smart Efficient Flame Retardant Carpets in Non Halogen Flame Retardant Polymers
Study of Adaptability of the Compound of Sulfonate Acid Water Reducing Agent with Ceramic Slurry Blank
A Study of Coating Surface Microstructure and Characteristics of Coated Paper Related to Binder
Low-Energy Impact Damage Mechanism Analysis of FRC Laminates
Sprayed Concrete – Possibilities of Testing Sprayed Concrete Prepared in Laboratory
Experimental Methods of Synthesis of Nano-/Macro Mineral Materials
Preparation of Magnetic Fluids Based on Associated Polymers
Evaluation of Strength Characteristics of Fibre-Cement Slab Material
Research on Friction and Wear Properties of Ti(C,N)/Fe Composites
Study of Thermal Technical Properties of Lightweight Concrete with Utilization of Non Stationary Hot-Wire Method
Grind Cullet and Silicate Coatings
Analysis on the Corrosion Failure of MDS Mine Multistage Centrifugal Pump Impeller
Green’s Function for Piezoelectricity with an Elliptical Inclusion in Multi-Field Circumstance
Chapter 2: Mechanical Engineering
Multifunctional Integration Equipment Design and Construction Technology Research
Dynamics Analysis and Modeling of a Hexapod Robot with Single Drive
The RPR Group in Mechanism Analysis and Design System
System Optimization for Prism Based Stereovision
J-Integral Evaluation for Calculating Structural Intensity and Stress Intensity Factor Using Commercial Finite Element (FE) Solutions
Analysis of Hybrid (Hydrodynamic/Hydrostatic) Journal Bearing
Optical Triode Based on Electrically Induced Quadratic Cascading in an Optical Superlattice
A Study on Double Plus Chain Mechanism for Li-Ion Power Battery Formation Equipment
The Study of Current and Voltage Needle for Li-Ion Battery Formation
Comparison of Various Object Stress Rates under Simple Shear
Numerical Study of Improving Aerodynamic Performance of the Cylinder Airfoil of Magnus Wind Turbine
Kinematic and Dynamic Stress Analysis of the Structural System of Wheel Loader Based on the Rigid-Flexible Coupling
A Study on the Testing System and Method for Li-Ion Power Battery
Research and Development of Measuring Equipment for Treadmill Exercise Energy Transfer
Study of a Model for the Evaluation of the Heat Losses from Electric Cables Buried According to the Norm Standard
Time-Frequency Correlation Method for Improving the Accuracy in Detecting Leaks in Pipelines
Chapter 3: Mechatronics and Control
An Autonomous Navigation Algorithm Using Geomagnetic Sensor and Star Sensor
The Research of Real-Time Trajectory Interpolation Based on Open Numerical Control System
Highway Traffic Incident Detection and Optimal Sensor Placement Layout
A Hybrid Authentication Protocol with ID-Based Signcryption for Vehicular Ad Hoc Networks
Comparative Study on Multiobjective Power Unit Coordinated Control Problem via Differential Evolution and Particle Swarm Optimization Algorithms
Composite Grinding Machine Asynchronous Electric Spindle Direct Torque Closed-Loop Servo Control Research
Development of a Sensor to Detect Condensation of Super-Sonic Steam
Design of the Control System for Laser Guiding AGV
Device for the Experimental Determination of Control Objects' Mathematical Models
Some New Applications of MEMS in the Biomedical and Environmental Fields
Design of Ka Band Patch Microstrip Antenna Array on LCP Substrate
Numerical Analysis of Bias Load on Integral Flotation Cushion
Modal FEM Analysis Using Weak Form Equations for a Microgyroscope with Bulk Giant Magnetostrictive Material (GMM) Resonator
Design of Multi-User Aerobics Wireless Human Motion Capture System Based on MEMS
Study on Post Processing for MIKRON Five-Axis Machining Center Based on Catia V5
VME Bus-Based Multiprocessor Parallel Data Acquisition System
The Research of Direct Torque Control of Induction Motor Based on Efficiency Optimization
A Soldering Defect Inspection System of a Special Integrated Circuit Board Based on Computer Vision
Researches on Image Distortion Correction Method Based on Image Magnification
Gaze Recognition and Application
Remote Control System Design for Domestic Wall-Mounted Gas Boiler Based on GSM Modem
Chapter 4: Manufacturing Processes
An Innovative Experimental Setup for Laboratory Tests of Fine Blanking Process
Thermal-Elastic-Plastic Finite Element Analysis for Laser Welding Deformation of Thin Plate
Influence of Vibration Inclination on Surface Quality and Tool Wear by Ultra-Precision Vibration-Assisted Cutting
NDE Inspections and Simulation of Defects in Composite-Sintered Bushes
The Experimental Investigation of WEDM for Surface Roughness of Hardened Tool Steel: SKD 61
The Application of Virtual Reality Technology on Modern Sports
Effect of Milling Parameters and Coolants on Surface Hardness of Tool Steel: SKD 11
Study of Metallurgical Properties in the Sintered Ore with Variable Carbon
The Study of Surface Finish in Face Milling of Stainless Steel: AISI 304
Effect of Post Weld Heat Treatment on Carbon Steel AISI 1050 in Heat Effected Zone
Effect of Riveting Parameters on Strength of Aluminium Joint
Exploitation and Application of the Middle Thickness Model in Cold Tandem Mill
Gasifying Kinetics Analysis on Mixing Municipal Solid Waste and Sludge
The Optimization Program of Reverse Circulation Drilling Equipment
BAS Municipal Wastewater Advanced Treatment Process
Chapter 5: Civil and Environmental Engineering
Differents Methods to Estimate the Mean Radiant Temperature in an Urban Canyon
Quality Evaluation of Jajrood River (IRAN) by Quality Indices Methods
Land Use/Cover Classification over Small Areas Using Conventional Digital Camcorder Imagery Based on Frequency-Based Contextual and Neural Network Classification Techniques
Analysis Development Status of A12 Reservoir
Bracing Systems for Seismic and Wind Performance of Tall Buildings
The Role of Facade Angle in Gaining Solar Energy (Case Study: Iran, Bandar-Abbas)
Designing a Sustainable Planting Module for Extensive Green Roofs under the Tropical Climate
Water Flooding Curve in Determining the A Reservoir Water Flood Sweep Efficiency
Chapter 6: Product Design and Engineering Management
Consumer Lifestyles and Preferences for Sofa Leather
Optimized Product Design Methodology: A Combinatorial Reverse Logistic Cost-Benefit Analysis Model of WEEPs
Development of an Adjustable Physical Mockup Used for Design Validation of Passenger Car Ergonomics and Interiors
A Framework for Evaluating the Performance of RFID-Enabled Supply Chain
Methods of Evaluation on Manufacturing Information Quality
Measurement of Physicochemical Property and Flavor Compounds of Hawk Tea Yogurt


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.