Zhang / Jin / Zhao | Advanced Research on Material Engineering and Electrical Engineering | Buch | 978-3-03785-670-3 | sack.de

Buch, Englisch, 350 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 800 g

Zhang / Jin / Zhao

Advanced Research on Material Engineering and Electrical Engineering

Selected, peer reviewed papers from the 2013 International Conference on Insulating Materials, Material Application and Electrical Engineering (MAEE2013), March 16-17, 2013, Changsha

Buch, Englisch, 350 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 800 g

ISBN: 978-3-03785-670-3
Verlag: Trans Tech Publications


Volume is indexed by Thomson Reuters CPCI-S (WoS).The collection includes selected, peer reviewed papers from the 2013 International Conference on Insulating Materials, Material Application and Electrical Engineering (MAEE2013), March 16-17, 2013, Changsha. The papers are grouped as follows: Chapter 1: Research on Material Engineering, Technologies and Applied Mechanics; Chapter 2: Electrical Power System, Electronics and Electrical Engineering.
Zhang / Jin / Zhao Advanced Research on Material Engineering and Electrical Engineering jetzt bestellen!

Weitere Infos & Material


Preface and Committee
Chapter 1: Research on Material Engineering,Technologies and Applied Mechanics
Low Resistivity Aluminium Alloy of High Tensile Strength and Elongation
Research on Electron Mobility Model for Tensile Strained-Si(101) with Properties of Semiconducting Materials
The Lattice Distortion-Induced Topological Insulating Material
Research on Microwave Absorbing Properties of Epoxy Resin Composites Containing Activated Carbon-Fiber Felt Screens
Thermal Performance Test of the New Sandwich Insulation Composite Wall Panels
Honing TC11 Titanium Alloy Material the Choice of Stone
Electrochemical Property Study of Water-Wall Tube 20G in SO42- Medium at Room Temperature
Application of Si in Tool and Die Steel
Prediction Model for the Boiler NOx Emission with Material Properties Based on the Artificial Neural Network
Enhanced Oil Recovery with Properties of Thermoplastic Material by Hot CO2 Flooding
The Application of Circular Magnetic Grid Sensor in Automatic Viscometer for Measuring Viscosity of Liquid Material Based on Fluid Mechanics
The Application of Absorbable Suture Materials and Tissue Engineering on Renovation of Exercise-Induced Anadesma Injury
Influencing Factors of Self-Stressed Concrete Filled Steel Tube with Segments Bearing Capacity
Exploration of Goaf of Colliery Area with Engineering Materials in a Highway Tunnel
Situ Testing Study on Jacking Force of Manual Pipe-Jacking with Engineering
Study on Precast Concrete Beams on the Longitudinal Bearings
The Research of Electrochemical Behavior of Alloy AA5083 in 3.5% NaCl Solution
Study on Beneficiation of a Low-Grade Refractory Copper Oxide Ore in Tajikistan
Study on Environmental Materials with the Influence of Soil Carbon of Temperate Forests along an Altitude Gradient
Effect of Four Materials Including Glycine, Arginine, Proline and Sodium Glutamate on Survival of Bifidobacterium bifidum during Freeze-Drying
Research on Methane Hydrate Meta-Stable Property of Gas Hydrates for Application to Natural Gas Storage and Transportation
The Research on Solar Cell of a Novel Ribbon Silicon Material
Optimized Formulation of APN Toothpaste with Biochemical Materials Using Response Surface Methodology
Study on Environment Materials with Separation and Identification of Denitrifying Phosphorus-Removing Bacteria
Study on Environmental Materials with Aspergillus niger as Adsorbent for Sequestering Pb(II) from Aqueous Solution
Fluid Mechanics Analysis and Effect of Splitter Blades on the Characteristics of High-Speed Centrifugal Pump
Study the Stability of Bending-Torsional Coupled Vibration of a Rotor System with a Crack and Variable Perturbation Method
Study on Residual Stress and Numerical Simulation Technology of Welding to Thick Structure Construction
Research on the Stability of a Rotor System Based on Mechanics Properties with Application of Floquet Theory
Study on Stress Strain in UG-Based Fatigue Analysis of Piston Pin
Study on Kinematic Features of CNC Machine Based on Multi-Body System Theory with Error Modeling
Study on the Characteristics of the Hull Vibration Caused by the Shaft Surface Roughness
Research on Photocatalytic Degradation Kinetics of S-Doped TiO2 to Phenol
Mechanics and Pretreatment Research of Vibration Signals for the Numerical Control Machine
Mechanics Study on the Leaning-Type Arch Bridge during the Construction Process Based on Building Materials
Analytical Solution of Sidewise Buckling of Two-Hinged Circular Arch under Concentrated Force
Chapter 2: Electrical Power System, Electronics and Electrical Engineering
Research on Electrical Power System with Information Modeling and SCL Description of IED for Transformer Condition Monitoring Based on IEC61850
Research on Electrical Power System with Analysis of Fault Operation State Magnetic Field about DFIG in Wind Power
New Theories and Methods of Low Frequency Oscillation Analysis under Smart Grid Framework in Electrical Engineering
Design of Power Line Communication System Underground Based on Zigbee in Electrical Control Engineering
Low-Speed Common Rail Diesel Engine Electronic Control System Structure and Working Principle in Electrical Control Engineering
Studies on Power Distribution of AC and VSC-HVDC Hybrid System for Wind Power Integration
Study of the Electricity-Draw Control System in Electrical Engineering Based on Neural Network DTC
Design of Controller in Electrical and Electronic Engineering Based on Dual Micro Controller Units for a Brushless DC Motor
A Fault Phase Selection Method Based on Arc Voltages for High-Voltage Line Protections in Electric Power Systems
A Commutation Strategy for Matrix Sinusoidal Waveform Converter with High-Frequency Link in Electric Power Systems
Research of Compensated AC Regulated Power Supply in Electric Power Systems Based on a High-Frequency Isolated Transformer
The Numerical Simulation and Design of the Electrical Heating System for Electric Conductive Ultra-High-Temperature-Ceramics Test Specimen
Study on Power Delivering in Energy Management for Hybrid Electric Vehicle
Design of the Impedance Measurement Instrument in Electrical Engineering Based on Phase-Sensitive Detector
Optimal Dispatching of Electrical Sensors for Automatic Control
Minimum Amplitude of Geomagnetic Disturbance in Electrical Power System Leading to 500kV transformer DC Bias
EHV Generator Loss of Field Protection Research in Electrical Power System
Development of Transformer Winding Distortion Testing Device in Electrical Power System Based on Electrical Properties
Double-Loop Control of Inverter with LCL Filter in Electrical Power System Based on Improved Instantaneous Symmetrical Component
Research on Fault Diagnosis of High-Voltage Circuit Breaker in Electrical Power System Based on KPCA
Research on LCR Filter in the Link of Shunt Active Power Filter in Electrical Power System
Research of Grid-Connected Photovoltaic System in Electrical Engineering with Energy Storage Based on DC Bus
Influence of the Arc Suppression Coil with Parallel Resistance on Single-Phase Arc Grounding Overvoltage
Study on Electromechanical Coupling Vibration of Simulation Technology Based on the Drive System
Novel Man-Machine Interface of Intelligent Leak Detector for Advanced Material with Material Properties in Fuel-Gas Pipe Based on Electrical Power System
Modeling Permanent Magnet Synchronous Motor System in Electrical Automation Engineering Based on Adaptive Neuro-Fuzzy Inference System
The Software Design for an Automation Intelligent Distribution Terminal Unit in Electric Power Systems Based on C and Assembly Language
On-Line UHF Monitoring System of Partial Discharge for Electrical Equipment
Design and Implementation of Synchronous Wireless On-Line Detection System of MOA Resistive Current in Electric Power System Based on GPS
Chapter 3: Related Topics
Research on On-Line Anti-Icing Technology for Carenary along Electrified Railway
Sound Transmission through Lightweight Metallic Plate by Fourier Transform Method
A Modified Maximum Power Point Tracking Algorithm under Partial Shading Conditions


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.