Buch, Englisch, 780 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1500 g
ISBN: 978-3-03785-275-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Technik Allgemein Modellierung & Simulation
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
Weitere Infos & Material
Preface, Organizing Committees and Sponsors
Chapter 1: Applied Materials
Investigation on Dissolving and Strain Induced Precipitation Behavior in Nb-Bearing Microalloyed Steel
Investigation on Nano-Scale Structure of Plain and FA Cement Paste
Numerical Simulation of Different Projectile Penetrating the Single-Layer Steel Target
Microstructure Modeling for Prediction of Thermal Conductivity of Plain Weave C/SiC Fibre Bundles Considering Manufacturing Flaws
Effect of Annealing Process and Cold Reduction Ratio on Microstructure and Mechanical Property of 350MPa Grade Structural Hot Dip Galvanized Steel Sheets
The Corrosion Behavior of 304L and 316L Stainless Steel in Food Grade Phosphoric Acid Solutions
Numerical Study on the Equivalent Target for Deep Penetration
The Study on Engineering Construction Material Information Management System Based on.NET
Microstructure and Performance of Multiple Tracks Lap-Joint Coating by Plasma Cladding
Study on the Performances and Interfacial Structure of Magnesium Hydroxide Whiskers/ABS Composites
An Improved Magnesium Alloy Heater’s Controller Based on the Smith Predictor
Application of SPC in the Quality Control of the Leaf Tobacco Threshing and Redrying Production
IFC-Compatible Durability Controlling System for RC Structure
The Research of Biological Reaction Food Waste Disposal Equipment
Improve Lower Leg Impact Performance Considering Pedestrian Protection
Fluid Flowing of Cohesive Mixing in the Tank of a Planetary Mixer
Fracture Monitoring of Composite Wind Turbine Blade Using High-Speed Bragg Grating Sensor System
Failure Mode Estimation with Inter-Fiber Failure Analysis of Composite Wind Turbine Blade
Chapter 2: Fundamental Materials Science
Facile Synthesis of Flake Copper Powder Loaded With Silver Particles
Research on Strength Characteristics of Expansive Soil
Deriving Plastic Constitutive Equations of the Material in Complex Stress State by Means of Simple Test Results
Properties of Graphite Matrix Composite Bipolar Plate Reinforced by Short Carbon Fiber
Controlled Preparation of Microporous Polymer Membrane by Simple Biodegradation Method
Study on Stress Intensity Factor of PMMA with Double Cracks Using Coherent Gradient Sensing (CGS) Technique
Decomposition of Two Phase WC and W2C in Casting Tungsten Carbide Particles in Steel/Iron Substrate Composites
The Adsorption of Low Concentration SO2 with the Second Modified Activated Carbon Fiber Loaded Mn
Features Extraction of CO2 Signal with Operational Conditions Adaptability
Finite Element Simulation of Surface Roughness of an Al-5052 Plate Processed by Shot Peening
Micro-Structure and Hardness of (Ti,Al,Nb)N Coatings Prepared under Different Negative Pulse Bias by Arc Ion Plating
Crack Behavior of Fe-Based Coating by Plasma Cladding
Alloy and Powder Preparation of High Niobium Containing TiAl Based Alloys
Study on Microstructure and Mechanical Properties of Epoxy Resin/Carbon Black Composites Prepared by in Situ Polymerization
Soften Behavior of 7050 Aluminum Alloy during High Temperature Compression Deformation
Experimental Study on the Process of the Three-Dimensional Rock Crack Growth Influenced by the Pre-Crack Profile Geometry
Study on Curing Reaction and Mechanical Properties of Liquid Crystalline P-SBPEPB/BPAER/MeTHPA System
A Facile Method for the Synthesis of Silver Nanoparticles in the Presence of Sodium Phosphate
Chapter 3: Mechanics of Materials
Dynamic Data-Bit Allocation of a Ternary Optical Computer
Study on a New Technological Scheme for Cold Press Forging Forming of Step Holes in Thick Sheet Metal
Application of Group Technology in Mechanical Processing
Measurement of Permittivity of Ferroelectrics Using Coaxial Resonator
Coupled Dynamic Analysis of Magnetic Bearing-Rotor System under the Influences of Base Motion
Optimization of Lug Design Based on Damage Tolerance Analysis
Theoretical Study on Stability of the Separable Elliptic Ultrasonic Vibration Cutting Process
Particle Swarm Optimization for Cylinder Helical Gear Multi-Objective Design Problems
A Cascaded Multi- and Single-Mode Fiber Transporting for Laser Beam
Research and Analysis of Dry Crushed Waste Tire Processing
Flow Filed Simulation Analysis of Nearly Balanced Drilling Mechanism
Optical Fiber CO Concentration Measurement Prism of the Gas Chamber Variable Optical Path Automatic Adjustment System Research
Simulating the Fracture Wave Field Characteristics Using Finite Element Method of the Anisotropic Elastic Wave
Intelligent Vehicle-Mounted Alcohol Detection Control System
Thermal Shock Cracks Initiation and Propagation of WCp / Steel Substrate Surface Composite at 500°C
The Preparation of the Second Modification of Activated Carbon Fiber Loaded Mn
A Low-Power High Linearity Gm-C Filter
Design and Implementation of High-Speed Dual-Modulus
Numerical Simulation Analysis for Enclosure Piles Cracking of a Deep Pit Foundation
Study on Emission Control of CNG Engine Based on D-S Evidence Theory
Generic Object Detection Based on Boosting Embedded with Bag-of-Words
Seismic Vulnerability Analysis of Water Pipeline in Wenchuan Earthquake
Simulation Study on the Heavy Parts of Pipe Hydrostatic Tester and their Structures Optimization
Stream Function of Cohesive Mixing in the Tank of a Planetary Mixer
Fuzzy-Control with Gray-Predictor for Time-Varying Delay Systems
Chapter 4: Manufacturing and Mechanics Engineering
A Novel Fault Diagnosis for Rolling Element Bearings Based on Continuous Wavelet Transform and Hidden Markov Model
Neural Network-Based Reliability Prediction of Free-Running Submarine Model Test System
Design of Fractional Order Fuzzy Controller Based on Sliding Mode Control for Robotic Flexible Joint Manipulators
Synchronization of Chaotic Fractional-Order Systems via Fractional-Order Adaptive Controller
Design and Optimization of the Hydraulic Incline Drawing Lifting Mechanism
Influence of Depth of Cut on Grind-Hardened Layer and Its Uniformity
FEA Simulation of Extruding Feed through Die Hole in Pelleting Process
Research on the Integrated Development System of NGW Planetary Gear Transmission
Timing Effection Analysis of Micro-Robot Actuated by ICPF
Design of the Automatic Position Block for the Punched Holes on Angle Steel of Transmission Tower
Cans’ Optimization Design Model
Development of Safety Detection Integrated Equipment for Car Seat
Automatic Wool Washing Machine Design and Research
Rescue Robot Design and Research
The 3D Measuring Method Based on the Color Coding Grating
Design of Vibration Isolation System for Laser Strapdown IMU
Design and Simulation of Brushless DC Motor Control System Based on DSP
Research and Application of High-Efficiency Multi-Cyclone Dust Removal
Pricing of Some Exotic Options under Jump Diffusion and Stochastic Interest Rates Model
The Method on Modifying the Dynamic Properties of Self-Interactive Systems by External Factors
Discussion of Security and Health Monitoring on Quayside Container Crane
Automatic Assembly and Key Technologies of Expansion Joints
Analysis on Tax Preferential Policies of Promoting University Students' Venture and Employment
Research on Teaching Reform of the “Tax Law” Course
The Mathematical Modeling Method of the Square Packing Container Optimization Arrangement
Program Design of On-Line Fault Diagnosis for ASCS of AMT in a Heavy-Duty Vehicle
Studies on Mega-Pixel Cell Phone Lenses Based on Aspheric Optics
On the Living Satisfaction of University Students Based on the Restriction Factors of Recreational Activities - A Case Study of Zhejiang
Rapid Prototyping of Handicraft Based on Reverse Engineering
Chapter 5: Industrial Mechanics
Super-Resolution Reconstruction of Underground Mine Surveillance Images Based on MAP
The Study and Application of Knowledge Management System of Manufacture Enterprise under Collaborative Manufacturing
Robust and Fast Spatial Verification
Research on Class Evaluating Method for Cooling Water Fouling Countermeasures Based on PNN
Simulation for Operation of Tidal Power Plant
Numerical Simulation Analysis of High-Voltage Transmission Tower
Design of LED Backlight Module Used for Large-Size TFT-LCD
Analysis of Green Ships Design and Manufacturing Technology
Modeling and Simulation of LED Manufacturing Process with ExtendSim
Process Technology and Fixture Design for Critical Component of Radar
Numerical Analysis for the Multi-Point Stretch Forming Process of Aircraft Skin Panel
Numerical Simulation of Gas Flow Field in Gas-Liquid Hydrocyclone Separator
Shaping Parameter Control of High-Speed Cold Roll-Beating Based on Simulation and Regression Analysis
Schedule Study and Simulation Experiment of Lift-Sliding Stereo Garage Based on A* Algorithm
A New PRI Transform for the Deinterleaving of Radar Pulses
System Modeling and Application in Gearbox Fault Diagnosis Based on EMD and ARX Model
Circuit Design on Electronic Control System of Automatic Transmission of Automobile
Design of Sliding Mode Control Based on Nonlinear Observer for Nonlinear System
Analysis of Driver’s Physiological Characteristics under Ice-Snow Conditions Base on Driving Simulator
Numerical Simulation of High Velocity Waterjet Characteristics and Impact Pressure
Loading-Control of Eddy Current Dynamometer for AMT Test Bench
Study of Calibration Technology of AMT Clutch Control
The Testing Equipment Research of Auto Electric Window Lifter Performance
Secondary Development of Automatic Drawing Software of Spindle of Numerical Control Lathe
Chapter 6: Materials and Mechanics Information System
Research of Recommended Service of Mobile Terminal Based on User Behavior Analysis
Design of Defense Algorithm Concerning Arp Attack on Campus Network
Development of Embedded System GUI Based on Qt/Embedded
Principles of Collaborative Decision Making Application at Airport (Ukraine)
A Time Petri Net Representation for Scientific Research Project Management
Design on Data Manipulation Class Based on ADO.NET
Developing Students’ Comprehensive Abilities through Mathematical Modeling Teaching
Chinese New Word Identification Using N-Gram and PPM Models
Dynamics of a Pair of Five-Neuron Networks with Delays
The Study of Point Cloud Data Automatic Merging Technology in 3D Measuring
A New Efficient Secure Multi-Party Computation
Study on Cloud Computing in Telecommunications
A New Fuzzy Support Vector Machine for Credit Scoring
LAHP-Based Theory of Building e-Commerce Customer Satisfaction Degree Index System
A Study on the Development Strategies of the 4PL in Ningbo
Ningbo Urban Logistics System Planning
Feature Analysis for Shadow Detection
Fitting Methods by Cubic Spline Interpolation to Curved Surface Molding in Automobiles’ Covering Components
Adaptive Contract Net Protocol Based on Ant Colony Optimization Algorithm
PSO-Based Uncorrelated Hybrid Discriminant Analysis Algorithm
Optimization Methods of Loading Path for Tube Hydroforming
A New Formant Detection Algorithm Based on Cepstrum
Design of Embedded Multimedia Advertising System
Research of Image Denoising Based on Wavelet Threshold
The Study of CNC Machine Tools Interface Design
Study on Word Association Knowledge and Reading Ability
Teaching Interpretation for English Majors of Vocational Colleges - A Workshop Approach
Computer Aided Design of Valve Train of Cylinder
Computer Aided Design of Transmission Components of Liquid Stirred Tank
Research on Mining Frequent Path and Prediction Algorithms of Object Movement Patterns in RFID Database
Data Acquisition System Based on VC++
A SPH Based Particle System Editor for Computer Games
Multi-Relational Sequential Pattern Mining Based on Iceberg Concept Lattice
Research on Framework of Digital City Based on GIS
A Survey of Mobile Internet Data Management: Models and Searching Methods
