Semi-Solid of Alloys and Composites XV

15th International Conference on Semi-Solid Processing of Alloys and Composites (S2P)
Erscheinungsjahr 2019
ISBN: 978-3-0357-1373-2
Verlag: Trans Tech Publications

Buch, Englisch, 520 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1170 g

The 15th International conference on Semi-Solid Processing of Alloys and Composites (S2P) are dedicated to the science and technology of semi-solid processing of metals, alloys and composites. Since the discovery of the distinctive flow behavior of metals in the semi-solid state during the early seventies, this fascinating technology has experienced a dynamic and turbulent development history, which has led to a whole family of new production processes, new equipment, and industrial applications with the goal of exploiting this characteristic flow behavior for technical and economic benefits.

Autoren/Hrsg.

Zhu, Qiang

Rassili, Ahmed

Midson, Stephen P.

Hu, Xiao Gang

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface
Chapter 1: Keynote Lectures
Dendrite Fragmentation in Semisolid Casting: Could we Do this Better?
Correlation between Microstructure and Properties of Semi-Solid Products
Semi-Solid Casting of Aluminium from an Industrial Point of View
Chapter 2: Materials Development and Characterization
Semi-Solid Processing of Nano-SiCP/ Al-Si Composites and Mechanical Properties with Rheo-Casting
A Study of Anodising Behaviour of Al-Si Components Produced by Rheocasting
Microstructural Evolution of SKD11 Tool Steel during Multi-Stage Thixoforming and Subsequent Heat Treatments
Structural Characteristics of Metal-Ceramic Interpenetrating Phase Composites Manufactured by Using Semi-Solid Forming Technology
Effects of High Pressure on Fe-Rich Phases and Mechanical Properties of Al-14Si Alloys with Rheo-Squeeze Casting
Wear Properties of Thixoformed Al-5.7Si-2Cu-0.3Mg Aluminium Alloy
Influence of Rare Earth Additions on the Microstructure and Mechanical Properties of Al7Si0.3Mg Alloys Processed by Semi-Solid Die Casting and Gravity Die Casting
Overageing Characteristics of Alloy A356 and Al-Mg-Si Casting Alloys
Variation of Properties in the Cross-Section of Semi-Solid Al-7Si-0.3Mg Castings
Microstructure and Mechanical Properties of AZ91D Alloy by Three Types of Forging Process
Wear and Corrosion Behavior of Functionally Graded Semi-Solid 9Cr18Mo Steel
Application of the Correlation between Hardness and Strength in Conventional Al Alloys into Semi Solid Processed Products
Comparison of Semisolid Microstructure Evolution of Wrought Nickel Based Superalloy GH4037 with Different Solid Fraction
Ti-Zr-V-Cu-Be BMGMCs Processed by Semi-Solid Processing
Weldability and Joining Characteristics of AISI D2/AISI 304 Steels Using Semisolid Diffusion Joining
Mechanical Properties of CNTS-Grafted Carbon Fiber/Magnesium Composites Prepared by Liquid-Solid Infiltration Extrusion
Microstructure Evolution of TiB2/7075 Composites in Semi-Solid State near Liquids within Holding Time
Effect of Nano-SiC on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy Processed by Thixomolding
Evolution of Microstructure and Mechanical Properties of Semi-Solid Squeeze Cast A356.2 Aluminum Alloy during Heat Treatment
Microstructure of Semi-Solid Extruded Copper Alloy after Heat Treatment
Refinement of Primary Silicon Grains in Semi-Solid Al-25%Si Hypereutectic Aluminum Alloy Slurry
Characterization of Microstructure and Shrinkage Porosity of a Semi-Solid Metal Slurry in Gravity Die Casting
Chapter 3: Semi-Solid Slurry Preparation and Semi-Solid Processing Technologies
Preparation of Semi-Solid A390 Aluminum Alloy Slurry through a Serpentine Pouring Channel
SIMA Processing of Cu34wt.%Zn2wt.%Pb Brass Alloy
Metallurgical Structure of A356 Alloy Solidified by Mechanical Stirring
Manufacture of Continuous Metal Matrix Composite Strip Reinforced by Particulate Materials from the Semisolid Processing
Experimental Study on CF/Al Composite Plate with Complex Curved Surface Fabricated by Liquid-Solid Infiltration Extrusion
Thixoforming of Wrought Aluminum Alloy 1973
Thixoforming of Semisolid Slurry with High Fraction Solid Fabricated by Partial Melting of Commerical Wrought Aluminum Alloys
Effects of Annular Electromagnetic Stirring Melt Treatment on Microstructure and Mechanical Properties of 7050 Rheo-Casting
Influence of Pouring Temperature and Alloy Additions on the Quality of a Semisolid Material Dragged during the Continuous-Casting Strip Processing of Al–Si A413
Microstructural Evolution of ZL104 Aluminum Alloy Semi-Solid Billet Fabricated by RAP Process
Damaging of Ultrasonic Horn for Semisolid Feedstock Production
Semisolid Casting of Short Freezing Range Alloys
Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy
Fabrication of Lotus Type Porous Ingots Using the Core-Bar Pulling Method
Microstructure and Properties of Semi-Solid CuSn10P1 Alloy under Different Filling Velocity by Squeeze Casting
Addition of Swarf to Produce a Semi-Solid Slurry during High Pressure Die-Casting of AS9U3 Aluminum Alloy
Analysis of the 355 Aluminium Alloy Microstructure for Application in Thixoforming
Impact of Intensification Pressure and Grain Refiner on the Hot Tearing Susceptibility of a Semi-Solid Cast Al-Zn-Mg-Cu Alloy
Microstructural Investigation of Semisolid Aluminum A356 Alloy Prepared by the Combination of Electromagnetic Stirring and Gas Induction
Effect of Particle Size and Weight Percent of SiC Particles on Microstructure and Hardness of A356-SiC Composites Produced by Semi-Solid Stir Casting
Microstructural Development of Aluminum A201 Alloy Semi-Solid Processing Feedstock Produced by Different Routes
Slurry Preparation and Hot Tearing Susceptibility of A201 Aluminum Alloy in Rheological Die Casting
A Study on Bar Drawing Process of A356 Alloy in Semisolid State
Metallurgical Interface of 7075/6061 Bimetallic Composite Ingot Casted by Semi-Solid Slurry and Molten Metal Pouring
Development of Slurry Preparation Method by Applying Mechanical Vibration
Evaluation of Al-5wt%Si-5wt%Zn as Raw Material for Semisolid Forming
Chapter 4: Techniques of Modelling and Numerical Research
Modelling and Experimental Investgations of Tooling Issues for Thixoforming of Steel
Study on Thixoforming Process of 15%SiCp/2A14 Composite for Production of Track Shoe
Modelling Semi-Solid Behaviour and Brittle Temperature Range
Using the Phase Field Method to Investigate Microstructural Evolution of Semi-Solid 357.0 Slurries
Numerical Simulation of Slurry Making Process of 7075 Aluminum Alloy under Electromagnetic Field in Rheocasting Process
Viscoelastic Properties of Thixotropic Semisolid Alloy Relating the Microstructure
Rheological Investigation of Semisolid AlSi7 Alloy by Means of Oscillation Experiments
Apparent Viscosity and Rheological Behavior of Aluminum-Alloy Slurry Containing Nano-Sized SiC Particles
Effect of Primary a-Al Morphology in Slurry on Segregation during 357 Semi-Solid Die Casting
Chapter 5: Industrial Application
Recent Advances in Commercial Application of the Rheometal Process in China and Europe
Semisolid Forging of 250 Automotive Spindles of S48C Steel
Recent Developments of Rheo-Diecast Components for Transportation Markets
Fabrication of Thin Heat Sinks by the Die Casting of Semisolid Al-25%Si
Die Design for Main Bearing Cap of Engine Block Based Semi-Solid Die Casting Process and the Comparison Analysis with Squeeze Casting Process
The Status of Magnesium Injection Molding in China
Case Study: Engine Bracket Made by Rheocasting Using the SEED Process
Thixoforming of Hypereutectic AlSi12Cu2NiMg Automotive Pistons
Industrialized Application of Rheo-HPDC Process for the Production of Large Thin-Walled Aluminum Alloy Parts
Analysis of the Influence of Surface Finishing on the Performances of Dies for HPDC
Semi-Solid Casting of Pure Magnesium
GISS Technology: Principle and Applications in Die Casting
Thixoforming of Aluminum A201- Expectations and Fulfilment
Semisolid Processing of Magnesium Alloys: Progress and Limitations

Über Autor(innen)

Eds. Qiang Zhu, Ahmed Rassili, Stephen P. Midson and Xiao Gang Hu