Sonstiges, Englisch, Band Volume 1119, 886 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1119, 886 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-298-3
Verlag: Trans Tech Publications
The 159 papers are grouped as follows:
Chapter 1: Nanoscale Materials and Technologies;
Chapter 2: Polymeric and Composite Materials and Their Properties;
Chapter 3: Investigations in Rubber Based Materials;
Chapter 4: Surface Engineering and Technologies of Coating;
Chapter 5: Bio- and Eco Materials;
Chapter 6: Metals and Alloys, Industrial Chemical Technologies;
Chapter 7: Technologies of Materials Processing;
Chapter 8: Materials and Related Technologies in Construction;
Chapter 9: Physical Properties of Materials in Mechanical Engineering
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Metal Nano Particles Formation on Rotating Powder (NPP) Substrate in Physical Vapor DepositionComparative Studies of Nanostructured Aluminum Alloys by Destructive and Nondestructive TestingInstant Microwave Synthesis of Titania Nanoflowers for Application in DSSCsSensitive Determination for Papain Conjugated CdSe Quantum Dots by Dynamic Light Scattering AnalysisPreparation and Characterisation of Surface Adsorbed Reduced Graphene Oxide/Polyaniline Nanocomposite on Polymer Membrane for Trimethylamine SensingPressure Dependence of AZO Film Deposited by RF Powered Magnetron Sputtering SystemOne-Pot Synthesis of High Aspect Ratio Copper Nanowires in Aqueous SolutionSynthesis of Amorphous Fe-Doped SiO2 Anode Nanomaterial via Sol-Gel MethodNumerical Study of Adsorption Enhancement by Nanoparticles Scale InhibitorSynthesis and Surface Modification of ZnO Nanorods ArraysInfluence of Synthesis Conditions on the Properties of SnO2 Nano-Crystalline via Hydrothermal MethodsFCC Gasoline Upgrading over Modified Nanoscale HZSM-5 CatalystEffect of Surface Stress on the Deformation of an Half-Plane Applied to Nanometer MaterialsNano-Scale Friction of Multi-Phase Powder Metallurgy Tool SteelsEffect of Minimum Quantity Lubricant of Al203 Nanoparticle with SDBS on Surface Roughness during Turning of Mild SteelImpact of Nanoparticles on Structure and Functional Properties of PBTG BiofilmsThe Dynamic Mechanical Analysis of a Clamped-Free Timoshenko Nano-Beam Subjected to the Moving Force the Nonlocal EffectsMobility Investigation of Nanoparticle-Stabilized Carbon Dioxide Foam for Enhanced Oil Recovery (EOR)Study of Nanocrystalline ZnAl2O4 and ZnFe2O4 with SiO2 on Structural and Optical Properties Synthesized by Sol-Gel MethodAg-Fe Alloy Nanoparticles Embedded in Polyaniline Nanocomposite Thin Films for E. coli Monitoring SensorOn the Formation of Nanograined LiCo2O3(OH) Spinel-Type Material Synthesized via Modified Low-Temperature Sol-Gel ApproachNanoclay as Anti-Blistering Agent in Polyester Based Coating: Effect of Sea Water and Distilled Water ExposureGraphene-CNTs into Neuron-Synapse Like Configuration a New Class of Hybrid NanocompositesOptical and Morphological Properties of TiO2 Nanotubes for Sensor ApplicationsNanofibrous Filters for RespiratorsAcetylene Sensing Characteristics of SnO2 NanowiresControllable Growth of Highly Oriented ZnO Nanorod Arrays on Copper by a Two-Step RouteA Computational Chemistry Approach for Investigation of Low Friction Mechanisms Based on FEP Film with Functionalized SiO2 NanoparticlesSynthesis of Zinc Oxide Nano Rods by Microwave Assisted Precipitation Method Using Polyacrylic AcidSynergistic Effect of Graphene Nanoplatelets and Nanoclay on Epoxy Polymer NanocompositesImproved Nanoindentation Phase Transformation in Functional Structure of NiTi SMA and GrapheneGreen Synthesis of Silver Nanoparticles Using Prunus Amygdalus Extract and their Anti-Microbial ActivityNanoparticles Stabilized Carbon Dioxide Foams in Sandstone and Limestone ReservoirInvestigation on Voltage Breakdown of Natural Ester Oils Based-On Zno NanofluidsPatterning of Polymer Arrays with Enhanced Aspect-Ratio Using Hybrid Substrate Conformal Imprint LithographyHybrid Hetero p-n Junction between ZnO Microspheres and p-Type MaterialsMechanism of Carrier Transport in n-Type ?-FeSi2/Intrinsic Si/p-Type Si HeterojunctionsResistive Switching Properties of Zr, Ti, and Zn Metal OxidesOptimization of Moulding Parameters on the Electrical Conductivity of Carbon Black/Graphite/Epoxy Composite for Bipolar Plateusing the Taguchi MethodBuckling Optimization of Composite Shells by Utilizing Finite Element Analysis, Neural Networks and Genetic AlgorithmGrowth of Anodized Layer and Cerium Sealing on Al7xxx/SiC CompositeMechanical and Morphological Properties of Buckminster Fullerene (C60) Added Glass Fiber Reinforced Polyamide 66 Multiscale CompositesFracture Mechanism of Polypropylene-Kenaf Composite under Cyclic LoadingReuse of Byproduct Alumina Composite Powder from Hydrogen Production ProcessComparative Study between SiC Reinforced Al 64430 Metal Matrix Composites and RHA Reinforced Al 64430 Metal Matrix CompositesPreparation and Performance Analysis of Mesh Hydroxyapatite/Sodium Alginate Composite ScaffoldInfluence of Acid/Ether-Ratio on Composition and Dispersive Property of Polycarboxylic Type Water ReducersDevelopment of the Bending Actuator with Nafion-Pt IPMC TubeAnalysis of Mechanical Properties of Wood Dust Reinforced Epoxy Composite Using Response Surface MethodologyBiocomposite from Acrylonitrile-Butadiene-Styrene Polymer and Kenaf Whole Stem Fibre: Mechanical PropertiesMolecular Dynamics Study of H2O Molecular Diffusion Behavior in PAM/PVA Polymer BlendsAn Experimental Study on the Usage of Poisson?s Ratio as a Damage IndexFlow Behavior of Wood Treated with Melamine Formaldehyde Resin under Non-Equilibrium Thermal-CompressionMechanical Properties of Poly(Butylene Succinate) Reinforced with Alpha CelluloseCompatibilization Efficiency of Reactively Modified Poly(butylene succinate) as a Compatibilizer for Poly(butylene succinate) CompositesModification of the Mechanical Behavior in the Glass Transition Region of Poly(lactic acid) (PLA) through Catalyzed Reactive Extrusion with Poly(carbonate) (PC)Effect of Fiber Content on Failure Modes of Glass Fiber Reinforced Injection Molded Polyamide 66 CompositesEffect of Particle Size of Natural Based Carbon Filler to the Absorbency of Superabsorbent Polymer Composite Synthesis by Graft Polymerization MethodMechanical Properties and Thermal Behavior of TPS/PBS Blends with Maleated PBS as a CompatibilizerSynthesis and Water Retention Properties of Poly(Acrylamide)-g-Kenaf Fiber HydrogelElectrical Characteristics of Silicone Rubber as Insulation MaterialsA Study on Epoxidised Natural Rubber and Cis 1,4-Polybutadiene BlendElectrospun Cellulose Acetate Fiber Containing Rubber ExtractThe Influence of Agglomerators on Powdering of Chloroprene Rubber PCR-244Research in Powdering Effects of Environmentally-Friendly Powder Rubber PSBR1500EInfluence of Modified Cassava Peel Waste (CPW) Loading on Tensile Properties of Natural Rubber Latex (NRL) ProductsCure Characteristics and Ageing Resistance of Recovered Waste Pre-Vulcanized Nitrile/Epoxidized Natural Rubber Latex Blends in Nitrile Butadiene Rubber CompoundsTransparent and Hydrophilic TiO2 Anatase as Top-Protective Layer for CSP ReflectorsArtificial Neural Network Modeling of Titanium Alloy Tribological Behaviour in Beta Solution Treated ConditionFabrication and Evaluation of Corrosion Behavior of Nickel Alloy Metal Matrix Composite with Influence of ChillsThe Effect of Styrene-Ethylene-Butadiene-Styrene on the Friction and Wear Properties of Polystyrene/Low Density Polyethylene BlendsSurface Modification on Vulcanized Rubber by DBD PlasmaThe Novel Electroless Plating Process for Enhancing Coating Adhesion StrengthNon-Linear Insulator Performance of Wind Turbine Blade Surface against Lightning StrikeDurability of Wood Shavel Composites with Environmental Friendly Based BinderResponse Surface Methodology to Optimize the Preparation of Chitosan/Alginate Nanoparticles Containing Curcumin Diethyl DisuccinateGreen Manufacturing of Eco-Materials by Urban Mining from Landfill Dump SiteControl of the Ozonation by-Products by O3/BAC in Shanxi Yellow River Water TreatmentStudy on Gamma Irradiation on Sago Starch-Chitosan-PVA Blend FilmsSynthesis of Biodegradable Polyester by Polycondensation with Tunable PropertiesSurface Modification of 316 L Stainless Steel by Sol-Gel Ceramic Coating and its CytocompatibilitySynthesis of Self-Healing Thermosetting Resin Based Capsules and their Related ComplexitiesExperimental Researches of Co-Cr Alloys Powders Manufactured by Sintering Process DMLS and Ni-Cr Alloys Used in DentistryInvestigation of Ag Oxidation and Ion Adsorption on Small Intestinal Submucosa in Simulated Body Fluid through Simultaneous Electrochemical and SPR MeasurementsRapid Biomimetic Coating of Biocompatible Calcium Phosphate on Titanium: Influence of Pretreated NaOH Concentration and Cleaning MethodTuning the Microwave Dielectric Properties of Nd0.96Yb0.04(Mg0.5Sn0.5)O3 by Introducing Ca0.8Sr0.2TiO3Mesoporous Titanium Dioxide Thin Films on Quartz via Electrochemical Anodisation ProcessPredicting Methane Diffusivity in Polymeric Membranes by Molecular DynamicsCrystallization of Aragonite from Vaterite Precursor during Various Refluxing TimesThe Influence of Electric Parameters on Film Quality of GZO Thin Film Fabricated by APPJ ProcessAn Analysis of Burn Defect in Hard Anodized Process of AL 3003Grafting of Linear Low Density Polyethylene (LLDPE) onto Tallow via Anhydride: Effect of Residence TimeEffect of Cerium Addition and Cooling Rate on Microstructure of ADC12 Eutectic Cast AlloyEffect of Lanthanum Addition on Fluidity of Complex Al-11Si-Cu-Mg Cast AlloyEffect of Lanthanum Addition on Microstructure and Hardness as Cooling Rate Function of ADC12 Eutectic Cast AlloyEffect of HCl Concentration on the Phase and Microstructure of TiO2 Film Synthesized by Low-Voltage Anodization of TitaniumEffect of Zr, Nb and Ti Additions on Injection Molded 316L Stainless Steel: Microstructural, Mechanical Properties and Corrosion ResistanceStudy of Mechanical Properties of Stainless Steel Oil Spill Plate on UG Finite Element MethodEffect of Different Operating Temperatures on Mechanical Properties of Several Rolled Aluminum AlloysEffect of Processing Factors on the Bonding Strength of Fibrous Assembles by Dielectric HeatingResearch on Heavy-Duty Coating Protection System of Magnesium AlloyCaustic Magnesia Production in Microfluid FurnaceA Numerical Study on Stir Casting Process in a Metal Matrix Composite Using CFD ApproachPerformance of Mixed Cellulase-Amylase Immobilized on PSF Membrane Support via Cross-Linked with Glutaraldehyde in Enzymatic HydrolysisEnergy Analysis of Hydrogen Production from Methanol under Atmospheric Pressure and Supercritical Water ConditionsPreparation and Characterization of sPDVB/SPPO Composite Proton Exchange Membrane for Fuel CellSulfate Ion Influence of LiNi1/3Co1/3Mn1/3O2 as Cathode Material for Lithium-Ion BatteriesLost Circulation Material Characteristics of Apple Skin Powder in Drilling MudEffect of Alloying Elements and Impurity (N) on Bulk and Grain Boundary Cohesion in Cr-Base AlloysEffect of Heat Treatment on Hardness and Microstructures of AISI 1045Thermodynamic Analysis of the Effects of Alloying Elements on the Stacking Fault Energy in Ruthenium-Bearing Nickel AlloysEffects of Al3+ and Zr4+ Cations on the Growth of Dendritic LithiumSensitivity Analysis of Material Constitutive Model Parameters in Numerical Simulation of the Orthogonal Turning ProcessSolid State Welding Process for Aerospace ComponentsDetermination of Optimum Parameter Levels for Quality Characteristics in Conventional Drilling of Thick Polymeric CompositesLaser Surface Melting of Ti6Al4V Alloy with Ti-BN-C Mixed PowdersProcessing of High Strength Magnesium Alloy with Enhanced Plasticity Using Squeeze CastingInvestigation into Effect of Cutting Conditions on Surface Roughness while Dry Machining Al-11%Si and Al-11%Si-1% Bi Die Casting AlloySurface Roughness Analysis of Carbon/Glass Hybrid Polymer Composites in Drilling Process Based on Taguchi and Response Surface MethodologyEvaluation of Two Different Energy Inputs for Deposition of Stellite 6 by Laser Cladding on a Martensitic Stainless Steel SubstrateEffect of Incremental Forming Process Parameters on Aluminum Alloy Using Experimental StudiesSurface Morphology and Wear Analysis of Stellite 6 Deposited on 9Cr-1Mo Steel Substrate by Laser CladdingPorosity and Microstructure Phase of Self Compacting Concrete Using Sea Water as Mixing Water and CuringQuasi-Static Lateral Crushing of Non-Woven Kenaf Fibre Reinforced Composite Hexagonal TubesPerformance Evaluation of Lightweight Oilwell CementsCharacterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash (RHA) in Cement Paste and ConcreteFibre Reinforced Concrete Class Control via Fib Model Code 2010 ApproachMechanical Performance of a Plate Made by RC and Repaired through SFRC MaterialNumerical Study on Uniaxial Compression Failure of Brittle Material with a Single FlawInfluence of Inner Steel Tube Diameter on Compressive Behavior of Square FRP-HSC-Steel Double-Skin Tubular ColumnsLattice Boltzmann Modeling of the Effective Thermal Conductivity for Complex Structured Multiphase Building MaterialsResidual Mechanical Parameters of Masonry Exposed to Fire: A New Numerical ApproachFirst Evaluation of the Structural Performance of Traditional Brickwork after Standard Fire ExposureFrictional Loss of Prestress Caused by Locally Deflected Tendons in Prestressed Concrete Girder BridgesInfluences of Concentric and Eccentric Loads on Buckling of Fixed-End Supported Pultruded FRP Channel BeamsResponse of Circular Footing on New Key Engineering Material - Granulated Blast Furnace Slag as Structural FillThe Colorants Effects of Fe2O3 on Borosilicate Glasses Prepared from Subbituminous Fly AshChoice between Retrofitting and Reconstruction of Buildings in Reinforced Concrete after an EarthquakeA Demonstrated Net Zero Energy Building in Thailand: The Way for Sustainable Development in BuildingsEffect of Carbonation on the Sulfate Attack of Concrete MaterialsC80 Early Strength Micro Expansion of Steel Tube Reinforced Concrete ResearchAnalysis on Energy Performance of Educational Facility by Composition of Double GlassInfluence of FRP-to-Concrete Gap Effect on Axial Strains of FRP-Confined Concrete ColumnsThe Effect of Mechanical Stress and Surface Tracking of 22 kV Cable SpacerThe Investigation of the Factors of the Fracture Toughness Based on the Compact Tension SpecimenNumerical Simulation of Spherical Indentation Method to Identify Metal Material PropertiesThermal Conductivity and Specific Heat Capacity of Different Compositions of Yttria Stabilized Zirconia-Nickel MixturesExperimental Verification of Effect of Adhesive Layer Thickness Used for Strain Gauge MountingResearch on Damage Mechanism of Aluminum Foam Sandwich Plate Subjected to Blast LoadingThe Mechanical Properties and the Influence of Parameters for Metallic Closed-Cell Foam Subjected to High-Strain RatesSintered SiO2 Modulus of Rupture Optimization by Means of Artificial Neural NetworksThe Main Factors that Influence the Mechanical Properties of Honeycomb BoardMechanical Properties of High-Strength Steel Obtained Using DIC for Specimens with a HoleRecycled Plastic Quality Indicator Development Using Material Testing Results and Radar ChartFinite Element Modeling of Effect of Adhesive Layer and Carrier Thickness Used for Strain Gauge MountingSilver-Mediated Perylene?3, 4, 9, 10?Tetracarboxylate Tetrapotassium Salt Aggregation for Highly Sensitive Detection of Iodide in WaterA Phenomenological Predictive Model for Thermo-Mechanical Fatigue of Notched Type 304 Stainless SteelStudy of Sodium Chloride?s Effect on Warm Fog Dissipation and its Mechanism ResearchOptimizing Detection Parameters of Magnetic Barkhausen Noise Using Heat Affected Zone in Welded Ship Steel Plate
