Current Material Research Using X-Rays & Related Techniques

Erscheinungsjahr 2015
ISBN: 978-3-03835-409-3
Verlag: Trans Tech Publications

Buch, Englisch, 540 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1100 g

As we have known, X-ray and related techniques are mainly used for quality control and materials characterization study. Most of the equipment used in these activities has contributed a lot to the advancement of materials science, solid state physics, chemistry, medical and other fields. In recent years, there have been a lot of improvements that includes the introduction of an array of software including instrument control, data interpretation and standard data that may provide quick results with enhanced efficiency. IXCRI 2014 aims to exchange and share experiences and research findings in all aspects of X-rays and related techniques among academics, researchers and the industry. Not only that, ICXRI 2014 includes a workshop session, which allows participants to gain a hands-on experience in learning fundamental understanding on X-ray applications. Due to this unique conference-workshop combination, I strongly believe that this conference will have a huge impact and will lead to future innovations and strong linkages among the participants. This is reflected in the number of participants, which amounts to a total of nearly 100 papers being presented here in this conference.

Autoren/Hrsg.

Abdullah, Hasan Zuhudi

Hussin, Rosniza

Mohd Ali, Mas Fawzi

Mohd Taib, Hariati

Ahmad, Sufizar

Ainun Rahmahwati, Ainuddin

Rahman, Hamimah Abdul

Mohd Hatta, Mohamed Nasrul

Wan Muhammad, Wan Nur Azrina

Mahzan, Shahruddin

Idris, Maizlinda Izwana

Badarulzaman, Nur Azam

Aida, Ibrahim Siti

Harun, Zawati

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Foreword, Committee and Sponsors
The Accuracy Check of Peak Voltages of Industrial X-Ray Machine Using Spectrometer System
Tensile Behaviour and Fracture Characteristics of Polydimethylsiloxane (PDMS) Filled Silica Composites
Crushing Behaviour of Empty Steel Tubes under Oblique Loading
Crushing Behaviour of Empty Steel Tubes under Eccentric Loading
Silver Nanoparticles in TiO2 Coatings for Potential Antimicrobial Coatings
Physico-Chemical Study of Nano and Bulk Ru/FTO Heterogeneous Catalyst for Synthesis of 1,2-Propanediol
Preparations of Hydroxyapatite from Tilapia Scales
Effect of Chemical Treatment on Crystalline Cellulose: Changes in Crystallinity and Functional Groups of Cellulose
Study of XRD and FESEM Characterization of Cellulose from Hardwood Waste of Resak (Vatica spp.)
Temperature Programmed Desorption of Carbon Dioxide for Activated Carbon Supported Nickel Oxide: The Adsorption and Desorption Studies

Effect of Cu-Excess on the Microstructure and Microwave Dielectric Properties of CaCu3Ti4O12 Ceramics
Temperature Programmed Reduction and X-Ray Diffraction Studies of Fe2O3 Reduction by Different Concentration of Carbon Monoxide
Crystal Structure Optimization and Semi-Empirical Quantum Chemical Calculations of Fused Bicyclic Heterocycles
Reduction of MoO2 to Metallic Molybdenum via Carburization and Thermal Process
Morphological Analysis of SS316L Foam Produced by Using Slurry Method
Temperature-Programmed and X-Ray Diffractometry Studies of WO3 Reduction by Carbon Monoxide
Potential of Eggshell Waste for Pyrolysis Process
Anodic Oxidation of Titanium for Biomedical Application
Development of Stainless Steel (SS316L) Foam with Different Composition Using Compaction Method
Production of Cobalt Chromium Molybdenum (CoCrMo) Foam by Replication Method
X-Ray Diffraction, Spectroscopic and Morphological Studies of Electrochemically Synthesized Copper(II) Palmitate Complex
Wear Analysis of ZTA-MgO Ceramic Cutting Inserts on Stainless Steel 316L Machining
Facile Preparation of Highly Crystalline Nanocellulose by Using Ionic Liquid
Enhancement of CO2 Capture Using CuO Nanoparticles Supported on Green Activated Carbon
Effect of Electrolyte Concentration on Anodised Titanium in Mixture of ß-Glycerophosphate (ß-GP) and Calcium Acetate (CA)
Effects of Mould Pressure and Substitution of Quartz by Palm Oil Fuel Ash on Compressive Strength of Porcelain
The Effect of Ultrasonic Treatment on the Oxidation Resistance and Microstructure of Fe80Cr20 Alloy Powder at High Temperature Oxidation Process
Investigation of Sulfur Crosslinking Interfacial of Natural Rubber (NR) Blending with Carboxyalted Styrene Butadiene Rubber (XSBR) Using X-Ray Absorption Spectroscopy
Adsorption of CO2 on Octadecylamine-Impregnated on SiO2: Physical and Chemical Interaction Studies
Synthesis and Characterization of Nanocrystalline Hydroxyapatite Powder
The Effect of Substrate on TiO2 Thin Films Deposited by Atomic Layer Deposition (ALD)
Preparation and Characterization of Biological Hydroxyapatite (HAp) Obtained from Tilapia Fish Bone
Structural Properties of Cerium Substituted Yttrium Iron Garnet
Morphology and Intermetallic Study of (Sn-8Zn-3Bi)-1Ni Solder under Liquid State Aging
Effect of Sintering Temperature on the Dielectric Properties of Pb(Zr0.52Ti0.48)O3 Ceramics Synthesized via High Planetary Ball Mill
Effect of Lanthanum and Strontium Doped on PZT Properties Prepared via High Planetary Mill for Piezofan Application
Influence of Binary Carbonate on the Physical and Chemical Properties of Composite Cathode for Low-Temperature SOFC
Facile Synthesis of One-Dimensional Titania Nanotubes via Hydrothermal Method
Improved Photocatalytic Oxidation of Organic Dye Using One-Dimensional Titania Nanotubes
Synthesis and Characterization of TiO2 Nanoparticles via Alternative Sol-Gel Preparation Routes
XRD and FTIR Studies of Natural Cellulose Isolated from Pineapple (Ananas comosus) Leaf Fibres
Effect of Sintering Temperature on Mullite Ceramics Fabricated from Treated Palm Oil Fuel Ash
XRD and EDS Analysis of Composite Cathode Powders LSCF-SDCC-Ag for Low Temperature Solid Oxide Fuel Cells (LTSOFC)
Effect of Current Density on Anodised Titanium in Mixture of ß-Glycerophosphate (ß-GP) and Calcium Acetate (CA)
Effect of Fe Incorporation on the Photocatalytic Activity of TiO2 by Sol-Gel Method
A Study of Pb (Zr0.52Ti0.48)O3 Ceramic Properties via High Energy Ball Mill
Banana Trunk as Green Corrosion Inhibitor for Carbon Steel in Subsea Applications
Effects of Sintering Temperature on the Properties of Stainless Steel Foam
Characterization and Process Optimization in the Extraction of Gold
High Resolution X-Ray Photoelectron Spectroscopy Study of the Interaction of Copper Ion with Chitosan Thin Film
Dielectric Properties of Li2CO3 Doped Nio Measured at High Frequency
Recycled Carbon Fiber as Flame Retardant in Palm-Based Polyurethane Composite

In Situ Powder X-Ray Diffraction Study on Hydrous Ferrous Sulfate Minerals
Identification of Phosphate Precipitates from Wastewater Digested Liquor
Sensitivity of HEMATEG Induced by Radiation Dose in the Diagnostic X-Ray Energy Range
Study on Optimum Low Temperature for ZnO Formation via Hot Water Treatment
Effect of Immersion and Green Inhibitor to Corrosion Rate of Carbon Steel
Banana Peel as Green Corrosion Inhibitor for Stainless Steel 304
The Effect of Aluminium Hydroxide (ATH) on the Mechanical Properties and Fire Resistivity of Palm-Based Fibreboard Prepared by Pre-Polymerization Method
Effect of Titania (TiO2) Addition to Zirconia Toughened Alumina (ZTA) Phases, Hardness and Microstructure
Structural Change of Cathode with Pore Former Addition in SOFC
The Effect of Ligands on CdSe Nanoparticle Films Deposited by EPD
Silica Extraction from Rice Husk by Warm Water Pretreatment
Formation and Characterization of PbxCd1-xS Interlayer for PbS/CdS/ZnS Quantum Dots Sensitized Solar Cells
X-Ray Diffraction Patterns of Oil Palm Empty Fruit Bunch Fibers with Varying Crystallinity
Magnesium Doped Hydroxyapatite through Mechanochemical Synthesis
The Anatase Formation on Anodised Titanium in Sulphuric Acid
Gel Oxidation of Titanium at Low Concentration of Sodium Hydroxide (NaOH)
Preliminary Studies of the Effects of Polyethylene Glycol/Hydroxyapatite Powder-Binder System for 3D Printing Application
Characterisation of Plasticity Response for Reciprocating Sliding Wear Test of Ti-6Al-4V under Variables Normal Load
Improvement on Mechanical and Dynamic Properties of Palm Fiber/PLA Composites by Fiber Treatment
Effect of Excitation Wavelength on the Blue Emitting Sr2MgSi2O7 Phosphor
Initial Efforts in Modelling Mass Transport in Microdialysis Probes: Physical Characterization of the Microdialysis Probe Membrane
Leached Residue Characterization of Manganese-Bamboo Saw Dust Blend: An X-Ray Diffraction Study
Calcinations Effect on Growth of Zinc Oxide Films Prepared via Dip-Coating Technique
Characterization of WC-Co Coatings Corrosion Product by Raman Spectroscopy
Synthesis of ß-Tricalcalcium Phosphate Block by Wet Milling Method of Calcium Hydrogen Phosphate Dihydrate and Calcium Carbonate
Ilmenite Chlorination: Usage of Gaseous Carbon Tetrachloride at Relatively Lower Temperatures
A Bentonite Layer between Alumina Foam and its Hydroxyapatite Coat: An Improved Scaffold for Bone Tissue Engineering Applications
The Effect of Hydroxyapatite Composition on ß Titanium Nanocomposites
Anode-Cathode Position: How it Influences the Radiation Risk to Staff Involved in Fluoroscopy Procedures
The Corrosion Attack on Stainless Steel 316L and WC-Co in High Sulphate-Chloride Ratio
Reinforced Green Ceramic Shell Mould for Investment Casting Process
XRD Analysis of Al-6vol%SnPb Composites Fabricated by Cold Forging Process with Various Sintering Temperatures
Image Reconstruction of Single Photon Emission Computed Tomography (SPECT) on a Bubble Column Using Expectation Maximization and Exact Inversion Algorithms: Comparison Study by Means of Numerical Phantom
A Novelty of Synthetic Hydroxyapatite from Cockle Shell and Characterization
Effect of Mixing Condition on the Mechanical Properties of Magnesium Based Composites
Lattice Strain, Crystallite and Microstructure Studies of SiC Irradiated by Electron Beam
Study on Indoor Formaldehyde Neutralization by Using Anatase and Rutile Nanotitania
Effects of Hydrothermal Duration on Synthesized Zeolite Rice Husk Particles
Higher Photocatalytic Activity of P-Incorporated TiO2 Nanotube Arrays
Recycled Glass Potential as Porous Ceramic Determine by Spectroscopy Analysis
Formation of Aligned Iron Oxide Nanopores as Cr Adsorbent Material
Properties of BaZrxTi1-x O3 Thick Film Deposited Using EPD Method
Effect of Rice Husk Firing Temperature on Synthesis of Silica (SiO2)
Effect of Sintering Temperature on Biphasic Calcium Phosphate (BCP) Biocomposite
Characterization of Binary Mg-Mn Alloy Synthesized through Mechanical Alloying: Effects of Milling Speed
Performance of Rutile as an Antibacterial Material in Ceramic Tiles
Microstructure Evolution of Conventional and Semi-Solid A356 Alloy with Addition of Strontium
Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement – Part 1: Manual Methods
Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement - Part 2: Computer-Based Methods