Buch, Englisch, 458 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 760 g
Buch, Englisch, 458 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 760 g
ISBN: 978-3-03835-537-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committee
Chapter 1: Ceramics and Composites
Effect of Surface Modification on Rice Husk (RH)/Linear Low Density Polyethylene (LLDPE) Composites under Various Loading Rates
Effect of Sintering Temperature on CuO Doped Barium Zinc Tantalate (BZT) Dielectric Properties
Titania (TiO2) as Antibacterial Material in Ceramic Tiles: Effect of Composition
Improvement of Porous Porcelain through Glaze Coating
The Effect of Boron Oxide on Phosphate Ion Released from Borosilicate Glass in Seawater
Effect of Fe2O3 Contents on the Ions Release from Phosphate-Based Glass
Effect of Cr2O3-TiO2 Addition on the Physical Properties of Zirconia Toughened Alumina
The Hardness Properties of Porcelain with Substitution of Quartz by Rice Husk Ash at Different Soaking Time
Synthesis and Characterization of Colorant Glass and Glass Ceramic from Non Stoichiometric Cordierite Composition with the Addition of Colorant Material at Different Temperature
Synthesis and Structural Characterization of La0.8Sr0.2MO3 (M=Mn, Fe, Co and Cr) Solid Ionic Material for Catalyst Application
Effect of Glass Addition on the Properties of CaCu3Ti4O12 Ceramics
Role of Ce2Zr3O10 Phase on the Microstructure and Fracture Toughness of ZTA Composites
Effect of Sintering Temperatures on Sr-Doped NiO Ceramics
Synthesis and Characterization of PZT Doped Lanthanum, Neodymium and Yttrium Using Sol Gel Method
Preparation and Characterization of Porous Cordierite for Catalyst Support Application
Preparation and Characterization of Hydrophobic Ceramic Foam
Effect of Titania and Magnesia on the Physical Properties of Zirconia Toughened Alumina
Synthesize CCTO Using Different Mixing Media
Mechanical and Morphological Properties of Meranti Wood Flour Filled Polypropylene Composites
Preparation of Nickel Oxide-Samarium-Doped Ceria Carbonate Composite Anode Powders by Using High-Energy Ball Milling for Low-Temperature Solid Oxide Fuel Cells
Effect of Alkaline Treatment on Sawdust Reinforced High Density Polyethylene Composite under Wide Strain Rate
Effect of Urea Formaldehyde Addition to the Dimensional Stability of Particle Board Made Using Glutardialdehyde Modified Corn Starch as Binder with FT-IR Analysis
Study on the Potential of Kaolinitic Clay from Perak State, Malaysia for Aluminosilicate Ceramic Ball
Optical Properties Changes of Ternary Glasses: Gamma Irradiation Effect
Preliminary Identification of Silantek Clay as Potential Refractory
Crystallite Size Measurement of Doped CaCu2.8Co0.2Ti4O12 Ceramic Samples Using Various Method
Chapter 2: Materials for Biomedical Engineering, Biotechnologies
Effect of Current Density on Anodised Titanium in Sulphuric Acid for Biomedical Application
Effects of Pre-Treatment Durations on Properties of Black Tilapia (Oreochromis mossambicus) Skin Gelatin
Influence of Calcination Temperature on the Microstructure and Crystallographic Properties of Hydroxyapatite from Black Tilapia Fish Scale
Effect of Stirring and Aging Time on the Formation of ß-Tricalcium Phosphate (ß-TCP) Powder
Effect of Ultrasonic Amplitude on Surface Properties of Anodised Titanium for Biomedical Application
Effects of Hydrochloric Acid Concentration on the Properties of Black Tilapia Fish Skin Gelatin
Characterisation and Wettability Properties of Anodised Titanium in Sulphuric Acid for Biomedical Application
Effect of Bath Temperature on Surface Properties of Anodised Titanium for Biomedical Application
Why a Comprehensive Physical Characterization Effort of Microdialysis Membranes is Imperative for Computational Mass Transfer Studies?
On Using Factorial Fractional Design to Fabricate Porous Alumina Scaffolds for Bone Tissue Engineering (BTE)
Modification of Rubber Particles and Ceramic Fillers on PMMA Denture Base Materials
The Formation of Cobalt Chromium Molybdenum (CoCrMo) Foams Fabricated by Slurry Method
Effect of Using Different Compositions and PU Foam Template to Produce Cobalt Chromium Molybdenum (CoCrMo) Foams
Characterization of Cordierite Glass with the Addition Colorant Ceramic Glaze for FIR Therapy
Characterization of Fatty Acid Coated Polymer/Nucleotide Droplets
Preparation of Bioactive Titanium Film via Anodic Oxidation in Agitation Condition
Investigation of Surface Properties of Titanium Treated with Combined Alkali and Sodium Removal Treatments
Characterization of 316L Stainless Steel Foams for Biomedical Applications
Compression Strength of Gellan Gum Hydrogel Incorporated with Organo-Montmorillonite and Cloisite 15A
Optimization and Characterization of Anatase Formed on Anodized Titanium in Phosphoric Acid
Chapter 3: Nanomaterials and Nanotechnology, Materials for Electronics
Ba0.5Sr0.5Co0.8Fe0.2-SDC Carbonate Composite Cathode for Low-Temperature SOFCs
Growth of Nanostructured ZnO Nanosheet on ITO/PET Substrate Prepared via Sol Gel Spin Coating and Hot Water Treatment
Morphology, Thermal and Chemical Properties of Nanocrystalline Cellulose (NCC) Hydrolyzed from Banana Stem
Effect of Temperature on TiO2/ZnO Nanostructure Thin Films
Effect of Citrate Concentration on Colloidal Gold (Au) Nanoparticles Produced Using Electro-Dissolution-Reduction Method
Electrochemical Synthesis and Characterisation of BiTe-Based Nanowire Arrays as Thermoelectric Nanogenerators
Phase Evolution of Yttrium Iron Garnet (YIG) Made by Solid State Sintering: Particle Size Effect
Effects of Neutron and Electron Irradiation on 4H-SiC Diodes
Chapter 4: Materials and Technologies for Mechanical Engineering
Physical Properties of 316L Stainless Steel (SS316L) Foam with Different Composition by Using Compaction Method
Optimization Processing Parameter of 6061-T6 Alloy Friction Stir Welded Using Taguchi Technique
Study on the Reduction Behavior of Molybdenum Oxide (MoO3) in Carbon Monoxide (CO) Atmosphere
Reduction Behaviour of WO3 to W under Carbon Monoxide Atmosphere
Effects of Soil Physical Properties to the Corrosion of Underground Pipelines
The Cutting Speed Influences on Tool Wear of ZTA Ceramic Cutting Tools and Surface Roughness of Work Material Stainless Steel 316L during High Speed Machining
Production of Stainless Steel 316L Foam with Different Solid Loading
Effect of NaNO3 as Enhancer on YBa2Cu4O8 Superconductor Phase Formation via Solid State Technique with Heating at Ordinary Oxygen Pressure
Characterisation of WC-17Co and WC-9Ni HVOF Sprayed Cermet Coatings
Corrosion Study of SAC305 Solder in Acidic Solution
Chapter 5: Materials and Technologies for Chemical Engineering
Studies on Adsorption-Desorption of CO2 by Long Chain Fatty Amine Supported on SiO2
Preparation of Activated Carbon from Walnut Shell Doped La and Ca Catalyst for Biodiesel Production from Waste Cooking Oil
Synthesis and Characterization of Silica-Alumina Supported Ca and Ni Catalyst for Deoxygenation of Vegetable Oil into Diesel
Synthesis of Aluminium Hydroxide and Alumina by Hydrothermal and Solvothermal Methods
Preliminary Studies on Acid Leaching of Finely-Ground Malaysian Low Grade Manganese Ore (LGMO)
Synthesis of Polymethylvinylsiloxane from Several Silicon Compounds Followed by FTIR and NMR Techniques
In Situ XRD Study of Zirconia Phase Transformation Produced from Chemical and Mineral Processes
The Reduction Behaviour of Cerium Doped Iron Oxide in Hydrogen and Carbon Monoxide Atmosphere
Chapter 6: Waste Recycling and Environmental Engineering
Sago Pith Waste Ash as a New Alternative Raw Materials from Agricultural Waste
Waste Banana Peel and its Potentialization in Agricultural Applications: Morphology Overview
Chemical, Thermal and Phase Analysis of Malaysia’s Electric Arc Furnace (EAF) Slag Waste
Immobilization and Characterizations of Imidazolium-Based Ionic Liquid on Silica for CO2 Adsorption/Desorption Studies
Standardless EDXRF Analysis Methods of U and Th in Malaysian Tin Slag Waste
CTAB-Assisted Precipitation Synthesis of Ca(OH)2 Sorbent for CO2 Captures
Development of a-Fe2O3 as Adsorbent and its Effect on CO2 Capture
Potential of Fabricated Light Foamed Concrete in Reducing Radon from Building Material
Treatment of Oily Waste Using Activated Carbon from Agriculture Waste
