Sonstiges, Englisch, Band Volume 840, 458 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 840, 458 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03859-322-5
Verlag: Trans Tech Publications
The 81 papers are grouped as follows:
Chapter 1: Ceramics and Composites
Chapter 2: Materials for Biomedical Engineering, Biotechnologies
Chapter 3: Nanomaterials and Nanotechnology, Materials for Electronics
Chapter 4: Materials and Technologies for Mechanical Engineering
Chapter 5: Materials and Technologies for Chemical Engineering
Chapter 6: Waste Recycling and Environmental Engineering
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Effect of Surface Modification on Rice Husk (RH)/Linear Low Density Polyethylene (LLDPE) Composites under Various Loading RatesEffect of Sintering Temperature on CuO Doped Barium Zinc Tantalate (BZT) Dielectric PropertiesTitania (TiO2) as Antibacterial Material in Ceramic Tiles: Effect of CompositionImprovement of Porous Porcelain through Glaze CoatingThe Effect of Boron Oxide on Phosphate Ion Released from Borosilicate Glass in SeawaterEffect of Fe2O3 Contents on the Ions Release from Phosphate-Based GlassEffect of Cr2O3-TiO2 Addition on the Physical Properties of Zirconia Toughened AluminaThe Hardness Properties of Porcelain with Substitution of Quartz by Rice Husk Ash at Different Soaking TimeSynthesis and Characterization of Colorant Glass and Glass Ceramic from Non Stoichiometric Cordierite Composition with the Addition of Colorant Material at Different TemperatureSynthesis and Structural Characterization of La0.8Sr0.2MO3 (M=Mn, Fe, Co and Cr) Solid Ionic Material for Catalyst ApplicationEffect of Glass Addition on the Properties of CaCu3Ti4O12 CeramicsRole of Ce2Zr3O10 Phase on the Microstructure and Fracture Toughness of ZTA CompositesEffect of Sintering Temperatures on Sr-Doped NiO CeramicsSynthesis and Characterization of PZT Doped Lanthanum, Neodymium and Yttrium Using Sol Gel MethodPreparation and Characterization of Porous Cordierite for Catalyst Support ApplicationPreparation and Characterization of Hydrophobic Ceramic FoamEffect of Titania and Magnesia on the Physical Properties of Zirconia Toughened AluminaSynthesize CCTO Using Different Mixing MediaMechanical and Morphological Properties of Meranti Wood Flour Filled Polypropylene CompositesPreparation of Nickel Oxide-Samarium-Doped Ceria Carbonate Composite Anode Powders by Using High-Energy Ball Milling for Low-Temperature Solid Oxide Fuel CellsEffect of Alkaline Treatment on Sawdust Reinforced High Density Polyethylene Composite under Wide Strain RateEffect of Urea Formaldehyde Addition to the Dimensional Stability of Particle Board Made Using Glutardialdehyde Modified Corn Starch as Binder with FT-IR AnalysisStudy on the Potential of Kaolinitic Clay from Perak State, Malaysia for Aluminosilicate Ceramic BallOptical Properties Changes of Ternary Glasses: Gamma Irradiation EffectPreliminary Identification of Silantek Clay as Potential RefractoryCrystallite Size Measurement of Doped CaCu2.8Co0.2Ti4O12 Ceramic Samples Using Various MethodEffect of Current Density on Anodised Titanium in Sulphuric Acid for Biomedical ApplicationEffects of Pre-Treatment Durations on Properties of Black Tilapia (Oreochromis mossambicus) Skin GelatinInfluence of Calcination Temperature on the Microstructure and Crystallographic Properties of Hydroxyapatite from Black Tilapia Fish ScaleEffect of Stirring and Aging Time on the Formation of ?-Tricalcium Phosphate (?-TCP) PowderEffect of Ultrasonic Amplitude on Surface Properties of Anodised Titanium for Biomedical ApplicationEffects of Hydrochloric Acid Concentration on the Properties of Black Tilapia Fish Skin GelatinCharacterisation and Wettability Properties of Anodised Titanium in Sulphuric Acid for Biomedical ApplicationEffect of Bath Temperature on Surface Properties of Anodised Titanium for Biomedical ApplicationWhy a Comprehensive Physical Characterization Effort of Microdialysis Membranes is Imperative for Computational Mass Transfer Studies?On Using Factorial Fractional Design to Fabricate Porous Alumina Scaffolds for Bone Tissue Engineering (BTE)Modification of Rubber Particles and Ceramic Fillers on PMMA Denture Base MaterialsThe Formation of Cobalt Chromium Molybdenum (CoCrMo) Foams Fabricated by Slurry MethodEffect of Using Different Compositions and PU Foam Template to Produce Cobalt Chromium Molybdenum (CoCrMo) FoamsCharacterization of Cordierite Glass with the Addition Colorant Ceramic Glaze for FIR TherapyCharacterization of Fatty Acid Coated Polymer/Nucleotide DropletsPreparation of Bioactive Titanium Film via Anodic Oxidation in Agitation ConditionInvestigation of Surface Properties of Titanium Treated with Combined Alkali and Sodium Removal TreatmentsCharacterization of 316L Stainless Steel Foams for Biomedical ApplicationsCompression Strength of Gellan Gum Hydrogel Incorporated with Organo-Montmorillonite and Cloisite 15AOptimization and Characterization of Anatase Formed on Anodized Titanium in Phosphoric AcidBa0.5Sr0.5Co0.8Fe0.2-SDC Carbonate Composite Cathode for Low-Temperature SOFCsGrowth of Nanostructured ZnO Nanosheet on ITO/PET Substrate Prepared via Sol Gel Spin Coating and Hot Water TreatmentMorphology, Thermal and Chemical Properties of Nanocrystalline Cellulose (NCC) Hydrolyzed from Banana StemEffect of Temperature on TiO2/ZnO Nanostructure Thin FilmsEffect of Citrate Concentration on Colloidal Gold (Au) Nanoparticles Produced Using Electro-Dissolution-Reduction MethodElectrochemical Synthesis and Characterisation of BiTe-Based Nanowire Arrays as Thermoelectric NanogeneratorsPhase Evolution of Yttrium Iron Garnet (YIG) Made by Solid State Sintering: Particle Size EffectEffects of Neutron and Electron Irradiation on 4H-SiC DiodesPhysical Properties of 316L Stainless Steel (SS316L) Foam with Different Composition by Using Compaction MethodOptimization Processing Parameter of 6061-T6 Alloy Friction Stir Welded Using Taguchi TechniqueStudy on the Reduction Behavior of Molybdenum Oxide (MoO3) in Carbon Monoxide (CO) AtmosphereReduction Behaviour of WO3 to W under Carbon Monoxide AtmosphereEffects of Soil Physical Properties to the Corrosion of Underground PipelinesThe Cutting Speed Influences on Tool Wear of ZTA Ceramic Cutting Tools and Surface Roughness of Work Material Stainless Steel 316L during High Speed MachiningProduction of Stainless Steel 316L Foam with Different Solid LoadingEffect of NaNO3 as Enhancer on YBa2Cu4O8 Superconductor Phase Formation via Solid State Technique with Heating at Ordinary Oxygen PressureCharacterisation of WC-17Co and WC-9Ni HVOF Sprayed Cermet CoatingsCorrosion Study of SAC305 Solder in Acidic SolutionStudies on Adsorption-Desorption of CO2 by Long Chain Fatty Amine Supported on SiO2Preparation of Activated Carbon from Walnut Shell Doped La and Ca Catalyst for Biodiesel Production from Waste Cooking OilSynthesis and Characterization of Silica-Alumina Supported Ca and Ni Catalyst for Deoxygenation of Vegetable Oil into DieselSynthesis of Aluminium Hydroxide and Alumina by Hydrothermal and Solvothermal MethodsPreliminary Studies on Acid Leaching of Finely-Ground Malaysian Low Grade Manganese Ore (LGMO)Synthesis of Polymethylvinylsiloxane from Several Silicon Compounds Followed by FTIR and NMR Techniques
In Situ XRD Study of Zirconia Phase Transformation Produced from Chemical and Mineral ProcessesThe Reduction Behaviour of Cerium Doped Iron Oxide in Hydrogen and Carbon Monoxide AtmosphereSago Pith Waste Ash as a New Alternative Raw Materials from Agricultural WasteWaste Banana Peel and its Potentialization in Agricultural Applications: Morphology OverviewChemical, Thermal and Phase Analysis of Malaysia?s Electric Arc Furnace (EAF) Slag WasteImmobilization and Characterizations of Imidazolium-Based Ionic Liquid on Silica for CO2 Adsorption/Desorption StudiesStandardless EDXRF Analysis Methods of U and Th in Malaysian Tin Slag WasteCTAB-Assisted Precipitation Synthesis of Ca(OH)2 Sorbent for CO2 CapturesDevelopment of a-Fe2O3 as Adsorbent and its Effect on CO2 CapturePotential of Fabricated Light Foamed Concrete in Reducing Radon from Building MaterialTreatment of Oily Waste Using Activated Carbon from Agriculture Waste
