Advanced X-Ray Characterization Techniques

Selected, peer reviewed papers from the International Conference on X-Ray and related Technique in Research and Industry (ICXRI 2012), July 3-5, 2012, Pulau Pinang, Malaysia
Erscheinungsjahr 2013
ISBN: 978-3-03785-560-7
Verlag: Trans Tech Publications

Buch, Englisch, 550 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1050 g

Volume is indexed by Thomson Reuters CPCI-S (WoS)X-ray applications and techniques are gaining importance and are moving to the forefront of science. A powerful tool with many advantages, X-ray applications and techniques present a route for rapid, hassle-free, non-destructive, safe and accurate analysis. This book contains a compilation of papers, all related to X-ray techniques, which are applied in various areas of science and technology, namely in research and industry. This publication aims to showcase the current diversity and versatility of X-ray related techniques. With contributors from all around the world, this publication of compiled papers will relate a host of X-ray related techniques with aims and the eventual findings, all of which are presented in a short and concise manner. It is believed that this book will be a good scientific literature which provides clear and important information on X-ray related ventures.

Autoren/Hrsg.

Ahmad, Zainal Arifin

Yarmo, Mohd Ambar

Abdul Aziz, Fauziah

Meor Yusoff, Meor Sulaiman

Ahmad, Badrol

Ismail, Khairul Nizar

Abdullah, Norazharuddin Shah

Sulaiman, Muhammad Azwadi

Azhar, Ahmad Zahirani Ahmad

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Zerstörungsfreie Werkstoffprüfung
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Werkstoffkunde, Materialwissenschaft: Forschungsmethoden

Inhaltsverzeichnis

Message from Guest Editors and Conference Committees
Growth of Nanocrystalline PbS Thin Films by Solid-Vapor Deposition
Preparation of Co0.5Zn0.5Fe2O4 and Co0.5Mn0.5Fe2O4 Nanoferrites by Co-Precipitation Method
The Effect of CaCO3 Addition on Physical Properties of ZnO-Based Crystal Glaze
Surface Morphology and Si 2p Binding Energy Investigation of Multilayer Porous Silicon Nanostructure
Compositional and Structural Characterization of Heterostructure InGaN-Based Light-Emitting Diode by High Resolution X-Ray Diffraction
Determination of Crystallite Size in Synthetic and Natural Hydroxyapatite: A Comparison between XRD and TEM Results
The Effects of Cr2O3 Addition on Fracture Toughness and Phases of ZTA Ceramic Composite
Photoluminescence Properties of Porous Silicon Nanostructures (PSiNs) with Optimum Electrolyte Volume Ratio of Photo-Electrochemical Anodization
Structural and Surface Studies of Undoped Porous GaN Grown on Sapphire
Characterisation of Phases and Lattice Parameter in Eutectic and Hypoeutectic Al-Si-Mg-Ce Cast Alloy
Structural and Thermoelectric Properties of Bi0.4Sb1.6Se3xTe3(1-X) Quaternary Compound
Influence of Substrate’s Alignment Strategy to the Growth of ZnO Nano-Petals via Solution-Immersion Method
Crystallization of Potassium Calcium Silicate from Modified Industrial EAF Slag
Identification of Mixed-Layer Mineral of Cambodian Clays and their Phase Changes upon Firing
Effect of Microstructural Evolution on the Properties of Friction Stir Processed Al 6061 Alloy under Different Cooling Conditions
Crystal Structure Optimization and Semi-Empirical Quantum Chemical Calculations of N-(3,4-Dichlorophenyl)-3-Oxo-Butanamide
Properties of Mortar Containing Rice Husk Ash at Different Temperature and Exposed to Aggressive Environment
Mechanical Alloying of Fe-Nb-N with Different Ball to Powder Weight Ratio for the Formation of Fe-NbC Composite
XRD Analysis and Tensile Properties of Attapulgite Clay Filled Polyvinyl Alcohol/Corn Starch Blend Films
Intermetallic Compound Formation on Solder Alloy/Cu-Substrate Interface Using Lead-Free Sn-0.7Cu/Recycled-Aluminum Composite Solder
The Effect of Amount of Surfactant and Types of Drug on Amorphous Silica Drug Delivery System (DDS)
Friction Stir Processing of Mild Steel to Enhance its Surface Hardness
Gel Oxidation of Titanium for Biomedical Application
Production of Porous Cordierite through Sol-Gel Polymeric Sponge Method
Growth of ZnO Nanostructures at Different Temperatures without Catalyst by Wet Thermal Oxidation Process
The Influence of Temperature on the Oxide Layer Formation of Aluminized Carbon Steel
Intermetallic Evolution of Sn-3.5Ag-1.0Cu-0.1Zn/Cu Interface under Thermal Aging
WO3-Polypyrrole Nanocomposite as Catalyst in Azelaic Acid Synthesis from Oleic Acid
P-Incorporated TiO2 Nanotubes for Methyl Orange Degradation
The Effects of Combustion Agents on the Formation of Bi-Based Compounds Synthesized Using the Soft Combustion Method
Study on the Influence of Synthesis Temperature of Anatase TiO2 Nanoparticles for Electrophoretic Deposition
XRD Analysis of Cu-Al Interconnect Intermetallic Compound in an Annealed Micro-Chip
Discovery of WO3/TiO2 Nanostructure Transformation by Controlling Content of NH4F to Enhance Photoelectrochemical Response
XRD and EDXRF Analysis of Anatase Nano-TiO2 Synthesized from Mineral Precursors
X-Ray Diffraction Study of High Velocity Oxy-Fuel (HVOF) Sprayed Cr3C2-NiCr Coating
A Simple Method to Prepare Indium Oxide Nanoparticles on Si (110)
The Effect of Stoichiometry to the Phase Formation of Barium Titanate
Heterogeneous Combustion of Ti/Si/C Powders with Estimated Ti3SiC2 Routes Morphologies
Thermal, Electrical and Physical Properties of Recycled Copper Filled Epoxy Composites
X-Ray and Morphological Characterization of Al-O Thin Films Used for Vertically Aligned Single-Walled Carbon Nanotube Growth
The Effect of MgO Dopant on the Dielectric Properties of CaCu3Ti4O12 Ceramics
Characterization of Potential Used Rubber Seed Coat Waste for the Removal of Remazol Brilliant Blue R Reactive Dye
Investigation of Grain Size Effect on the Impedance of CaCu3Ti4O12 from 100 Hz to 1 GHz of Frequency
Hybrid Multiwalled Carbon Nanotubes/Minerals as Potential Fillers for Polymer Composites
Structural and Optical Properties of Nanocrystalline CdO Thin Film Growth by Solid-Vapor Deposition
Investigation into the Metal Oxide Surge Arrestors' Failures
Structural and Microstructure Relationship with Fracture Toughness of CeO2 Addition into Zirconia Toughened Alumina (ZTA) Ceramic Composites
X-Ray Diffraction Study of Cold Sprayed Ni-20Cr and Ni-50Cr Coatings on Boiler
Microstructure Evolution of Sn-3.5Ag-1.0Cu-0.5Ni/Cu System Lead Free Solder under Long Term Thermal Aging
Iron Salt Concentration Effect to the Precipitation of Iron Oxide Nanoparticles Conjugated Antibody
Morphology and Intermetallics Study of (Sn-8Zn-3Bi)-1Ag Solder under Liquid-State Aging
Synthesis, Characterisation and Catalytic Activity of Sol-Gel Derived Silica-Mineral Acids
Luminescence of SrAl2O4:Eu2+, Dy3+ Ceramics Synthesized at Different Firing Condition
Study on Effect Recyclability of Ru/Bentonite-TiO2 Catalysts in Glycerol Hydrogenolysis Reaction Using X-Ray Photoelectron Spectroscopy (XPS)
Phase Formation of a-Cordierite Using Different Sintering Profile
Preparation of Cellulose Microfibrils from Banana (Musa acuminata) Pseudo-Stem Waste
Formation of Titanium Silicon Carbide (Ti3SiC2) via Modified Self-Propagating High Temperature Synthesis (SHS) System through Arc Melting
Effect of Ball-Milling Parameter on the Synthesis of MWCNT/Alumina Hybrid Compound
Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)
Synthesis and Growth Mechanism of Catalyst-Free ZnO Nanowires Using Chemical Vapour Deposition
Studies of Cell Growth on TiO2 Nanotubes
X-Ray Spectrometry Study on Historical Decorative Glasses in Thailand: Lanna-Style Glass
Production of Biodiesel from Non-Edible Jatropha curcas Oil via Transesterification Using Nd2O3-La2O3 Catalyst
X-Ray Diffraction Studies of CdxZn1-xS Thin Films Prepared by Spray Pyrolysis Technique
Influence of Silica and Zirconia Particles as Filler Loading on the Radiopacity of Dental Resin Composites
Synthesis and Gas Sensing Properties of SnO2 Nanostructures by Thermal Evaporation
Formation of Well Aligned ZnO Nanorods Grown on Silicon Substrate by Chemical Bath Deposition Method
Compressive and Wear Resistance of Alumina Reinforced Fe-Cr Matrix Composites
Structural and Optical Properties of In0.27Ga0.73N/Si (111) Film Grown Using PA-MBE Technique
Preparation and Characterization of Biphasic Calcium Phosphate Coatings on 316L Stainless Steel Fabricated by Electrophoretic Deposition
Tin Oxide Doped on Activated Dolomites as Efficient Catalyst for Biodiesel Production
Effect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) Method
Porous Ceramic Supports Prepared from Porcelain Mixture
Preparations and Characterization of Sago Starch Dispersion and Modification
Synthesis and Characterization of MWCNT/Dolomite Hybrid Compound as Potential Composite Fillers
Bamboo Sawdust as a Reduction Agent in Leaching Applications: Characterization Studies
Crystallization of TiO2 Nanotubes Arrays Grown by Anodization of Ti in Organic Electrolyte
Computational Studies of Electronic Structures and Hyperfine Interactions of Muonium in Tetraphenylgermane
Role of NbC Grain Growth Inhibitor on Microstructure and Hardness of WC-Stainless Steel Hard Metals
Single Step Combustion Synthesis for the Preparation of Bismuth Titanate Ceramics for Potential Applications
Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared by Sol-Gel Technique
Oxidative Degradation Monitoring of Natural Rubber Using S K-Edge X-Ray Absorption near-Edge Spectroscopy (XANES)
Mesoporous Silica Sol-Gel as Catalyst for the Synthesis of Alkylpolyglucosides
Electrical and Optical Characterization of Mg Doping in GaN
Preliminary Evaluation of Mukah Clay Deposits
Fabrication of Nanoporous Aluminum Oxide via a Two-Step Anodisation Process
Fundamental Characterisation of Dredged Marine Sediments from Kuala Perlis Jetty by XRF, XRD and FTIR
Properties of Aluminium Thin Films on Polyimide Plastics as Back Contacts in Thin Film Silicon Solar Cells
Quantitative Energy Dispersive X-Ray Flourescence Analysis of Low Alloy Steel by Regression and Modified Fundamental Parameter Techniques
Pb(Zr0.52Ti0.48)O3 Ceramics Synthesized Using Planetary Ball Mill
Dehydration Studies of Biomass Resources for Activated Carbon Production Using BET and XRD Techniques
Modeling Microfibril Angle and Tree Age in Acaciamangium Wood Using X-Ray Technique
Characteristics of Airborne Pm2.5 and Pm2.5-10 in the Urban Environment of Kuala Lumpur
The Effects of Superheating Treatment on Distribution of Eutectic Silicon Particles in A357-Continuous Stainless Steel Composite