Advanced X-Ray Characterization Techniques

Selected, peer reviewed papers from the International Conference on X-Ray and related Technique in Research and Industry (ICXRI 2012), July 3-5, 2012, Pulau Pinang, Malaysia
Erscheinungsjahr 2013
ISBN: 978-3-03795-356-3
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 620, 550 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Advanced Materials Research

X-ray applications and techniques are gaining importance and are moving to the forefront of science. A powerful tool with many advantages, X-ray applications and techniques present a route for rapid, hassle-free, non-destructive, safe and accurate analysis. This book contains a compilation of papers, all related to X-ray techniques, which are applied in various areas of science and technology, namely in research and industry. This publication aims to showcase the current diversity and versatility of X-ray related techniques. With contributors from all around the world, this publication of compiled papers will relate a host of X-ray related techniques with aims and the eventual findings, all of which are presented in a short and concise manner. It is believed that this book will be a good scientific literature which provides clear and important information on X-ray related ventures.

Autoren/Hrsg.

Ahmad, Zainal Arifin

Yarmo, Mohd Ambar

Abdul Aziz, Fauziah

Meor Yusoff, Meor Sulaiman

Ahmad, Badrol

Ismail, Khairul Nizar

Abdullah, Norazharuddin Shah

Sulaiman, Muhammad Azwadi

Azhar, Ahmad Zahirani Ahmad

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Zerstörungsfreie Werkstoffprüfung
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Werkstoffkunde, Materialwissenschaft: Forschungsmethoden

Inhaltsverzeichnis

Growth of Nanocrystalline PbS Thin Films by Solid-Vapor DepositionPreparation of Co0.5Zn0.5Fe2O4 and Co0.5Mn0.5Fe2O4 Nanoferrites by Co-Precipitation MethodThe Effect of CaCO3 Addition on Physical Properties of ZnO-Based Crystal GlazeSurface Morphology and Si 2p Binding Energy Investigation of Multilayer Porous Silicon NanostructureCompositional and Structural Characterization of Heterostructure InGaN-Based Light-Emitting Diode by High Resolution X-Ray DiffractionDetermination of Crystallite Size in Synthetic and Natural Hydroxyapatite: A Comparison between XRD and TEM ResultsThe Effects of Cr2O3 Addition on Fracture Toughness and Phases of ZTA Ceramic CompositePhotoluminescence Properties of Porous Silicon Nanostructures (PSiNs) with Optimum Electrolyte Volume Ratio of Photo-Electrochemical AnodizationStructural and Surface Studies of Undoped Porous GaN Grown on SapphireCharacterisation of Phases and Lattice Parameter in Eutectic and Hypoeutectic Al-Si-Mg-Ce Cast AlloyStructural and Thermoelectric Properties of Bi0.4Sb1.6Se3xTe3(1-X) Quaternary CompoundInfluence of Substrate?s Alignment Strategy to the Growth of ZnO Nano-Petals via Solution-Immersion MethodCrystallization of Potassium Calcium Silicate from Modified Industrial EAF SlagIdentification of Mixed-Layer Mineral of Cambodian Clays and their Phase Changes upon FiringEffect of Microstructural Evolution on the Properties of Friction Stir Processed Al 6061 Alloy under Different Cooling ConditionsCrystal Structure Optimization and Semi-Empirical Quantum Chemical Calculations of N-(3,4-Dichlorophenyl)-3-Oxo-ButanamideProperties of Mortar Containing Rice Husk Ash at Different Temperature and Exposed to Aggressive EnvironmentMechanical Alloying of Fe-Nb-N with Different Ball to Powder Weight Ratio for the Formation of Fe-NbC CompositeXRD Analysis and Tensile Properties of Attapulgite Clay Filled Polyvinyl Alcohol/Corn Starch Blend FilmsIntermetallic Compound Formation on Solder Alloy/Cu-Substrate Interface Using Lead-Free Sn-0.7Cu/Recycled-Aluminum Composite SolderThe Effect of Amount of Surfactant and Types of Drug on Amorphous Silica Drug Delivery System (DDS)Friction Stir Processing of Mild Steel to Enhance its Surface HardnessGel Oxidation of Titanium for Biomedical ApplicationProduction of Porous Cordierite through Sol-Gel Polymeric Sponge MethodGrowth of ZnO Nanostructures at Different Temperatures without Catalyst by Wet Thermal Oxidation ProcessThe Influence of Temperature on the Oxide Layer Formation of Aluminized Carbon SteelIntermetallic Evolution of Sn-3.5Ag-1.0Cu-0.1Zn/Cu Interface under Thermal AgingWO3-Polypyrrole Nanocomposite as Catalyst in Azelaic Acid Synthesis from Oleic AcidP-Incorporated TiO2 Nanotubes for Methyl Orange DegradationThe Effects of Combustion Agents on the Formation of Bi-Based Compounds Synthesized Using the Soft Combustion MethodStudy on the Influence of Synthesis Temperature of Anatase TiO2 Nanoparticles for Electrophoretic DepositionXRD Analysis of Cu-Al Interconnect Intermetallic Compound in an Annealed Micro-ChipDiscovery of WO3/TiO2 Nanostructure Transformation by Controlling Content of NH4F to Enhance Photoelectrochemical ResponseXRD and EDXRF Analysis of Anatase Nano-TiO2 Synthesized from Mineral PrecursorsX-Ray Diffraction Study of High Velocity Oxy-Fuel (HVOF) Sprayed Cr3C2-NiCr CoatingA Simple Method to Prepare Indium Oxide Nanoparticles on Si (110)The Effect of Stoichiometry to the Phase Formation of Barium TitanateHeterogeneous Combustion of Ti/Si/C Powders with Estimated Ti3SiC2 Routes MorphologiesThermal, Electrical and Physical Properties of Recycled Copper Filled Epoxy CompositesX-Ray and Morphological Characterization of Al-O Thin Films Used for Vertically Aligned Single-Walled Carbon Nanotube GrowthThe Effect of MgO Dopant on the Dielectric Properties of CaCu3Ti4O12 CeramicsCharacterization of Potential Used Rubber Seed Coat Waste for the Removal of Remazol Brilliant Blue R Reactive DyeInvestigation of Grain Size Effect on the Impedance of CaCu3Ti4O12 from 100 Hz to 1 GHz of FrequencyHybrid Multiwalled Carbon Nanotubes/Minerals as Potential Fillers for Polymer CompositesStructural and Optical Properties of Nanocrystalline CdO Thin Film Growth by Solid-Vapor DepositionInvestigation into the Metal Oxide Surge Arrestors' FailuresStructural and Microstructure Relationship with Fracture Toughness of CeO2 Addition into Zirconia Toughened Alumina (ZTA) Ceramic CompositesX-Ray Diffraction Study of Cold Sprayed Ni-20Cr and Ni-50Cr Coatings on BoilerMicrostructure Evolution of Sn-3.5Ag-1.0Cu-0.5Ni/Cu System Lead Free Solder under Long Term Thermal AgingIron Salt Concentration Effect to the Precipitation of Iron Oxide Nanoparticles Conjugated AntibodyMorphology and Intermetallics Study of (Sn-8Zn-3Bi)-1Ag Solder under Liquid-State AgingSynthesis, Characterisation and Catalytic Activity of Sol-Gel Derived Silica-Mineral AcidsLuminescence of SrAl2O4:Eu2+, Dy3+ Ceramics Synthesized at Different Firing ConditionStudy on Effect Recyclability of Ru/Bentonite-TiO2 Catalysts in Glycerol Hydrogenolysis Reaction Using X-Ray Photoelectron Spectroscopy (XPS)Phase Formation of a-Cordierite Using Different Sintering ProfilePreparation of Cellulose Microfibrils from Banana (Musa acuminata) Pseudo-Stem WasteFormation of Titanium Silicon Carbide (Ti3SiC2) via Modified Self-Propagating High Temperature Synthesis (SHS) System through Arc MeltingEffect of Ball-Milling Parameter on the Synthesis of MWCNT/Alumina Hybrid CompoundPreliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)Synthesis and Growth Mechanism of Catalyst-Free ZnO Nanowires Using Chemical Vapour DepositionStudies of Cell Growth on TiO2 NanotubesX-Ray Spectrometry Study on Historical Decorative Glasses in Thailand: Lanna-Style GlassProduction of Biodiesel from Non-Edible Jatropha curcas Oil via Transesterification Using Nd2O3-La2O3 CatalystX-Ray Diffraction Studies of CdxZn1-xS Thin Films Prepared by Spray Pyrolysis TechniqueInfluence of Silica and Zirconia Particles as Filler Loading on the Radiopacity of Dental Resin CompositesSynthesis and Gas Sensing Properties of SnO2 Nanostructures by Thermal EvaporationFormation of Well Aligned ZnO Nanorods Grown on Silicon Substrate by Chemical Bath Deposition MethodCompressive and Wear Resistance of Alumina Reinforced Fe-Cr Matrix CompositesStructural and Optical Properties of In0.27Ga0.73N/Si (111) Film Grown Using PA-MBE TechniquePreparation and Characterization of Biphasic Calcium Phosphate Coatings on 316L Stainless Steel Fabricated by Electrophoretic DepositionTin Oxide Doped on Activated Dolomites as Efficient Catalyst for Biodiesel ProductionEffect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) MethodPorous Ceramic Supports Prepared from Porcelain MixturePreparations and Characterization of Sago Starch Dispersion and ModificationSynthesis and Characterization of MWCNT/Dolomite Hybrid Compound as Potential Composite FillersBamboo Sawdust as a Reduction Agent in Leaching Applications: Characterization StudiesCrystallization of TiO2 Nanotubes Arrays Grown by Anodization of Ti in Organic ElectrolyteComputational Studies of Electronic Structures and Hyperfine Interactions of Muonium in TetraphenylgermaneRole of NbC Grain Growth Inhibitor on Microstructure and Hardness of WC-Stainless Steel Hard MetalsSingle Step Combustion Synthesis for the Preparation of Bismuth Titanate Ceramics for Potential ApplicationsSynthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared by Sol-Gel TechniqueOxidative Degradation Monitoring of Natural Rubber Using S K-Edge X-Ray Absorption near-Edge Spectroscopy (XANES)Mesoporous Silica Sol-Gel as Catalyst for the Synthesis of AlkylpolyglucosidesElectrical and Optical Characterization of Mg Doping in GaNPreliminary Evaluation of Mukah Clay DepositsFabrication of Nanoporous Aluminum Oxide via a Two-Step Anodisation ProcessFundamental Characterisation of Dredged Marine Sediments from Kuala Perlis Jetty by XRF, XRD and FTIRProperties of Aluminium Thin Films on Polyimide Plastics as Back Contacts in Thin Film Silicon Solar CellsQuantitative Energy Dispersive X-Ray Flourescence Analysis of Low Alloy Steel by Regression and Modified Fundamental Parameter TechniquesPb(Zr0.52Ti0.48)O3 Ceramics Synthesized Using Planetary Ball MillDehydration Studies of Biomass Resources for Activated Carbon Production Using BET and XRD TechniquesModeling Microfibril Angle and Tree Age in Acaciamangium Wood Using X-Ray TechniqueCharacteristics of Airborne Pm2.5 and Pm2.5-10 in the Urban Environment of Kuala LumpurThe Effects of Superheating Treatment on Distribution of Eutectic Silicon Particles in A357-Continuous Stainless Steel Composite