Sonstiges, Englisch, Band Volume 625, 954 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 625, 954 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-877-3
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 213 papers are grouped as follows:
Chapter 1: Advanced Materials Development and Technologies,
Chapter 2: Catalysts, Inhibitors and Reaction Engineering,
Chapter 3: Technological Processes, Methodology and Industrial System Engineering,
Chapter 4: Separation Processes and Membranes, Thermodynamics,
Chapter 5: Biomaterials and Technologies, Environmental Engineering
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Effect of NaOH and Water Contents on Solidification of Sodium Silicate Free GeopolymerPhase Behavior and Ternary Diagram Construction for Membrane Forming Polycarbonate SolutionsPhysicochemical Properties of Diethanolamine-Functionalized Si-MCM-41Antioxidant Activity and HPLC Analysis of Gallic Acid Phenolic Compound from Nephelium Lappaceum LeavesStudy of CO2 Solubility in Aqueous Blend of Potassium Carbonate Promoted with GlycineParametric Influence on the Physical Characterizations of Covalent Organic Framework-1Electron-Beam Irradiation of Halogen Free Flame Retardant Polymers for Wire and Cable ApplicationsDecentralized Control Design for Ethanol Fermentation by Zymomonas Mobilis ? Multi-Scale Control ApproachMechanical Activation of Fly Ash by High Energy Planetary Ball Mill and the Effects on Physical and Morphology PropertiesOptimization of Temperature Rise during CO2 Absorption Process Using Response Surface MethodologyEffect of Solid to Liquid Ratio on the Mechanical and Physical Properties of Fly Ash Geopolymer without Sodium SilicateOptimization of Naphthalene Extraction from its Mixture with Base Oil and Dibenzothiophene by BMIMDMP Ionic Liquid Using Response Surface Methodology (RSM)Identifying Thermal and pH Stability of Thiols Compound in Garlic ExtractCitric Acid Future Prospects for Pakistan, a Short ReviewHeavy Metal Ions Removal Using Amine-Functionalized Mesoporous AdsorbentsEffect of the Solvent Molar Ratios on the Synthesis of Zeolitic Imidazolate Framework 8 (ZIF-8) and its Performance in CO2 AdsorptionAn Evaluation of Fish Scales as Potential Adsorbents: pH and Concentration EffectHybrid Model for Biopolymerization Process (e-Caprolactone to Polycaprolactone)Study on Mechanical Properties of Zirconia-Alumina Based CeramicsEffect of Na/Al and Si/Al Ratios on Adhesion Strength of Geopolymers as Coating MaterialModifying the Refractive Index of Epoxy Resins Using Reactive Diluents to Enable Optical Self-Sensing in E-Glass Fibre CompositesThe Effect of KOH Concentration on Setting Time and Compressive Strength of Fly Ash-Based GeopolymerEffects of Intercalated Mono-, Di- and Triethanolammonium Cations on the Structural and Surface Characteristics of Sodium Form of BentoniteEffect of NaOH Concentration on the Strength of Non Sodium Silicate Fly Ash GeopolymerPreparation and Characterization of Polysulfone/Activated Carbon Composite Bead FormSol Gel Synthesized Nanosilica as Photoanode Material for Dye Sensitized Solar Cells (DSSCs) SystemMicrostructure Characterization for P92 Steels Subjected to Short Term Overheating above Critical Transformation TemperaturesDesulfurization of Fuel Using Ionic Liquids: Computational Selection of Cation and AnionInfluence of Citric Acid and Curing Time on Water UptakeExperimental Study of Geopolymer Solidification KineticsOptimization of Coating Thickness in a Tangential Fluidized BedCellulose-Modified Carbon Electrode for In Situ Lead DetectionDye Sensitized Solar Cell Based on Polyethylene Glycol/4,4?-Diphenylmethane Diisocyanate Copolymer Quasi Solid State ElectrolyteStudy on the Recovery of 1-butyl-3-methylimidazolium-based Ionic LiquidsThe Effect of Surface Area, Pore Volume, and Pore Size Distribution on the Modified Multiwalled Carbon NanotubesEcotoxicity of Pyridinium Based Ionic Liquids: A ReviewScreening of Microalgae for Antioxidant Activities, Carotenoids and Phenolic ContentsEvaluation of Antioxidants, Pigments and Secondary Metabolites Contents in Spirulina platensisIonic Liquid ? Assisted Synthesis and Characterization of Cerium Oxide Nanocubes for Degradation of Methylene BlueEnhance the Colloidal Stability of Magnetite Nanoparticles Using Poly(sodium 4-styrene sulfonate) StabilizersPolyethersulfone (PES) Membranes for CO2/CH4 Separation: Effect of Polymer BlendingMathematical Modelling for Hydrogen Production from Steam Gasification of CelluloseEffect of Sintering Temperature on Microstructure and Mechanical Properties of Ti-Nb-Sn-HA Composites Produced by Powder MetallurgyEvaluation of Carbon Dioxide Adsorption on Malaysian Coals for Potential SequestrationModelling of CO2 Loading in DEA by Using Peak Ratio of Raman SpectroscopyRelationships between Microstructure and Mechanical Properties of Polycristalline AluminaThe Impact of the Composition of the Crude Oils on the Wax CrystallizationEffect of Mixing Methods on the Precipitation of Basic Copper AcetateExtractive Desulphurization of Model Oil Using Sulphonium Based Ionic LiquidsFine Structural Analysis of Solvent Activated Cu-BTC for Carbon Dioxide CaptureSynthesis and Characterization of Hybrid Flocculant Kenaf BasedApplication of Minute-Bubble Technique to Reactive Crystallization of HydroxyapatiteDevelopments in Mercury Removal from Natural Gas - A Short ReviewStudy of Simultaneous Mass Transfer and Nucleation in Cryogenic Packed Bed for the Removal of CO2 from Natural GasSolubility of CO2 in Piperazine (PZ) Activated Aqueous Solutions of 2-Amino-2-methyl-1-propanol (AMP) at Elevated PressuresA Review on Robustness of Covalent Organic Polymers for CO2 CaptureRemoval of Methylene Blue from Aqueous Solution by Ionic LiquidLinear and Non-Linear Regression Analysis of Boron Adsorption Kinetics on New Radiation Grafted Fibrous AdsorbentKinetic Analysis on Catalytic Co-Gasification of Rubber Seed Shell and High Density Polyethylene MixturesA Review of Bio-Oil Upgrading by Catalytic HydrodeoxygenationCatalytic Cracking of Synthetic Bio-Oil: Kinetic StudiesKinetic Studies on Gold Nanoparticle Formation in Aqueous MediumMicrowave Energy Pretreated In Situ Transesterification of Jatropha Curcas L in the Presence of Phase Transfer CatalystEthanol Steam Reforming over Calcium Doped Ni/Al2O3 CatalystCatalytic Decomposition of Methane over La2O3 Supported Mono- and Bimetallic CatalystsSpontaneous Ignition Behavior of Nitrocellulose?Sulfuric Acid MixturesReaction Engineering of Microchannel Catalytic Reactors for Green ProcessEffect of Mn and Pb Promoters on the Performance of Cu/ZnO-Catalyst in CO2 Hydrogenation to MethanolPhotocatalytic Degradation with WO3/TiO2 Composites under UV and Visible LightConversion of Biomass-Derived Oxygen-Containing Intermediates into Chemical Raw Materials with ZeoliteReaction Kinetics of In Situ Methanolysis of Jatropha curcas SeedsConversion of Inedible Biomass Wastes as Alternative Petroleum-Related Chemicals Using Iron Oxide CatalystsTime-Series Analysis for Kinetic Interpretation of Catalytic Cracking of 1-Octene with a Model Involving Dominant ReactionsHydrogen Production by Methane Dry Reforming on Supported Nickel Catalysts ? Enhanced Stability of the Reforming Process
Transesterification of Pongamia pinnata Oil into Biodiesel Using Quick Lime Based Calcium Methoxide as CatalystSynthesis and Characterization of Co/CNTs Catalysts Prepared by Strong Electrostatic Adsorption (SEA) MethodLaccase Incorporated into PEG-PLA Polymer as Active and Stable Biocatalyst for Ionic Liquids MediaStudy of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic InhibitorsConversion of Lignocellulose into Fermentable Sugars Using Solid Acid Catalysis ? A ReviewEffect of Modification Techniques on Surface of Carbon Nanofiber as Catalyst SupportDevelopment of Morphology Dependent Titania Nanomaterial for Photo Degradation of DyesEffect of Ball Milling on the Catalytic Conversion of Cellulose to Levulinic AcidUpgrading of Pyrolysis Bio-Oil to Fuel over Supported Nanomaterials - A ReviewCatalytic Conversion of Oil Palm Fronds to Levulinic Acid in Ionic LiquidFlow Dynamics Investigation of CO2/CH4 Gas Mixture through Porous Media Using Computational ApproachHeat Exchanger Network Optimization Using Differential Evolution with Stream SplittingStudy of the Effect of Surface Roughness on Droplet Spreading Behavior Using CFD ModelingA Comparison Study between Integrated OBFARX-NN and OBF-NN for Modeling of Nonlinear Systems in Extended Regions of OperationCO2 Rich Gas Mixture Hydrate-Liquid Water-Vapor (H-Lw-V) Equilibrium Measurement and PredictionAn Integrated Framework for Refinery Scheduling and Operational OptimizationCFD Simulation of Droplet Formation under Various Parameters in Prilling ProcessDetection of Model Parameter Mismatch Using Simplified Partial Correlation Analysis for Closed-Loop SystemDynamics of Wall Heated Packed Bed ReactorsCompliance Audit Model for Managing Process Safety in Process IndustriesCFD Study on Syngas Dispersion for Biomass Process IndustryIdentification of Multi-Input Multi-Output Systems Using Combined Direct and Indirect MethodsCompliance of Hot Work Permit to Process Safety Management (PSM) RegulationEconomic Optimization of CO2 Capture Process Using MEA-MDEA MixturesThree-Tier Inherent Safety Quantification (3-TISQ) for Toxic Release at Preliminary Design StageDynamic Studies of Refinery Sludge Gasification in Updraft ReactorIsolation of Interacting Channels in Decentralized Control Systems Using Instrumental Variables MethodEvaluation of Electrical Capacitance Tomography Thresholding Techniques for Void Fraction Measurement of Gas-Liquid SystemComparison of Image Processing Methods for the Detection of Particle from Digital HologramMolecular Simulation for Piperazinium Based ILs: Effects of Alkyl Chain, Concentration and Anions on Henry?s ConstantsRecent Developments in Advanced Process Integration: Learning the Lessons from Industrial ImplementationsAn Investigation into the Need of Process Safety Management (PSM) in the Palm Oil IndustryOptimization of Condensate Fractionation Unit Using Response Surface MethodologySustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor SystemSustainable Integrated Process Design and Control for a Distillation Column SystemConsequence Study of Pressurized CO2 Release Containing Impurities with ObstaclesRobust and Effective PID Controller Identification for Delay Dominant SystemsEffect of Bulk Temperature on Formation of Crude Oil Fouling Precursors on Heat Transfer SurfacesDevelopment of Process Safety Management System (PSMS): Mechanical Integrity (MI)Methodology Development of a Flexible and Operable Energy Integrated Distillation ColumnsParametric Study and Improvement in Fuel Properties of Pre-Blended Methyl Esters from Crude Palm and Rubber Seed OilPreparation and Characterization of Rice Husk Ash for Adsorption of Phenol from Aqueous SolutionsPreparation and Characterization of Hydrophobic Silica Zirconium NanoparticlesPreparation and Quantification of Radioactive Particles for Tracking Hydrodynamic Behaviour in Multiphase ReactorsCFD Modeling of a Thin Liquid Film Flow over Horizontal Spinning Disk
Saccharomyces
cerevisiae from Baker?s Yeast for Lower Oil Viscosity and Beneficial Metabolite to Improve Oil Recovery: An OverviewThe Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling FluidFabrication and Characterization of Facilitated Transport Membrane for Gas SeparationModeling of CO2 Capture by Amine Solution (MDEA) in Hollow Fiber MembranesComparative Study of Linear Co-Volume Based Mixing Rules for Equation of State/ Excess Gibbs Energy (EOS/GE) Models for CO2 ? MEA and CO2 ? MDEA SystemsEffect of Acetone on Physical Properties of PES MembraneSolubility of CO2 in an Aqueous Ammonium Based Ionic LiquidHydration Behavior Study of Imidazolium Based ILs in WaterImpact of Gas Phase Composition on Gas Hydrate Process for Carbon Dioxide Capturing from Gaseous MixturesSupersaturated Gas Bubble Formation across an OrificeEffect of Superficial Gas Velocity on the Separation Efficiency of Inline Horizontal Swirl Tube SeparatorSeparation of Naphthenic Acid Using Hydroxide Based Ionic LiquidsPhase Diagram of an Aqueous Salt-Polymer System Composed of Poly Ethylene Glycol 4000 + Na3C6H5O7+ H2OSeparation of Benzene and Cyclohexane with Mixed Solvent Using Extractive DistillationAn Equation of State for the Liquid PhaseThermodynamic Properties of Flufenamic Ionic LiquidsCharacterization Study of a Highly Specific Affinity Membrane for Trypsin PurificationRemoval of Lactose from Highly Goat?s Milk Concentration through Ultrafiltration MembraneNovel Approach and Setup for Multi Component Mixtures Separation and Analysis at Offshore ConditionsPhysiochemical Properties of Pyrolysis Oil Derived from Fast Pyrolysis of Wet and Dried Rice Husk in a Free Fall ReactorFast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Biomass Size on the Yields of Pyrolysis ProductsEffects of the Heat Carrier?s Temperature and Particle Size on the Pyrolysis of Imperata cylindrica in a Transported Bed ReactorFast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Pyrolysis Temperature on the Yields of Pyrolysis ProductsExperimental Study on Heat and Mass Transfer during Fast Pyrolysis of Biomass ParticleComparison of the Yield and Properties of Bio-Oil Produced by Slow and Fast Pyrolysis of Rice Husks and Coconut ShellsStudies on Pyrolysis of Rice Husk Using Taguchi's L9 Orthogonal ArrayTechno-Economic Evaluation of Cryogenic Networks for Separation of CO2 from Natural GasRemoval of Amines from Wastewater Using Membrane Separation ProcessesHydrogen and Syngas Generation from Gasification of Coal in an Integrated Fuel ProcessorBa-SAPO-34 Zeolite Membrane for CO2/N2 Separation: Process OptimizationInterfacial Defects on Mixed Matrix Membranes and Mitigation Techniques for Gas Separation: A ReviewEffect of Column Height on Mass Transfer Characteristics of Spray ColumnSynthesis and Characterization of ZIF-8 Mixed Matrix MembranesDevelopment of Membrane Reformer System for Hydrogen Production from Natural GasNovel Approach and Setup for Multi Phase Mixtures Separation and Analysis at Offshore ConditionsPyrolyzed Waste Engine Oil Properties by Microwave-Induced ReactorSimulation and Analysis of Process Behavior of Ultrasonic Distillation System for Separation Azeotropic MixturesEffects of Ionic Liquid Blending in Polymeric Membrane: Physical Properties and Performance EvaluationCharacterization and Assessment of Cockle Shell as Potential CO2 AdsorbentsPolymer-Nanoclay Mixed Matrix Membranes for CO2/CH4 Separation: A ReviewEffects of Montmorillonite (MMT) Inorganic Fillers on Polyvinylidene (PVDF) Mixed Matrix MembraneA Review on Glassy Polymeric Membranes for Gas SeparationGas Permeability Study of Amine-Polymer Blend Membranes to Separate Carbondioxide from Natural GasRaman Spectroscopic Study for the Determination of Monoethanolamine ConcentrationReview on Pyrolysis of Hardwood Residue to BiofuelInfluence of Orifice Shape on Reaction Rate by Hydrodynamic CavitationHeat Transfer with Chemical Reaction in Wall Heated Packed Bed ReactorMathematical Modeling of the Radial Crossflow Hollow Fiber Membrane Module for Multi-Component Gas SeparationThermodynamic Analysis of Autothermal Reforming of Oxygenated Hydrocarbons at Thermoneutral Condition for Hydrogen ProductionUse of Waste Coconut Oil Obtained from Waste Water Pond of Coconut Milk Plant to Produce BiodieselDelignification of Empty Fruit Bunch (EFB) Using Low Transition Temperature Mixtures (LTTMs): A ReviewStudy the Release of Urea from Agrium? Coated Urea Using UV-Vis SpectrometerBiosorption of Heavy Metal Ions, Oil and Grease from Industrial Waste Water by Banana PeelCuring Characteristics and Tensile Properties of White Fly Ash Filled Natural Rubber CompoundspH Dependence on Biosorption of Pb (II) by P. amaryllifolius RoxbRecent Advancements on Superabsorbent Polymers to Produce Controlled Release Urea (Short Review)Optimization of Ethanol Production from Mango Peels Using Response Surface MethodologyAdsorption of Azo Dye Orange II by Supported TiO2: A ReviewAspects of Carbon Dioxide Mitigation by Nannochloropsis oculata Cultured in a PhotobioreactorModelling of Carbon Dioxide Leakage in Abandon Wells Using Computational Fluid DynamicsChitosan-Grafted Nanocellulose Derived from Empty Fruit Bunch for Ethyl Orange RemovalModelling of Adams-Bohart and Yoon-Nelson on the Removal of Oil from Water Using Microwave Incinerated Rice Husk Ash (MIRHA)Monoethanolamine (MEA) Wastewater Treatment Using Photo-Fenton OxidationThe Potential of Thiosulfinates in Garlic Extract as Urease BioinhibitorPalm Bio-Oil Upgrading Research-Towards Effective Utilization of WasteRemoval of Phosphate and Fluoride from Industrial Wastewater ? A Short ReviewScreen-Printed Carbon Electrodes for the Detection of BoldenoneBismuth-Modified Hydroxyapatite Carbon Electrode for Heavy Metal Detection in BiomatricesBiomethane Production and Palm Oil Mill Effluent Treatment by Co-Cultivation of Nannochloropsis oculataContinuous Heavy Metal Removal from Palm Oil Mill Effluent Using Natural Ceiba pentandra Packed-Bed ColumnDetermination of Antioxidant Activities and Total Phenolic Contents of Three Cyanobacterial SpeciesStarch Biodegradation in a Lignin Modified Slow Release Fertilizer: Effect of ThicknessRecent Advances of Using Ionic Liquid in Lignocellulosic Biomass DegradationMechanical Pretreatment of Lignocellulosic Biomass for Biofuel ProductionZinc Removal from Wastewater Using Hydrogel Modified BiocharPhotodegradation of Aqueous Diisopropanolamine Using Cu/TiO2: Effect of Calcination Temperature and DurationChemical Pretreatment Comparison for Oil Palm Empty Fruit Bunch: A ReviewApplication of Experimental Statistical Method in Optimizing Preparation Variables for Cu-Ni/TiO2 PhotocatalystWater Based Paint with Java Citronella Oil as Mosquito Repellent AgentMethylene Blue Removal from Aqueous Solution by Hylocereus undatus (Dragon Fruit) FoliageEffect of Modified MIL-53 with Multi-Wall Carbon Nanotubes and Nanofibers on CO2 AdsorptionPreparation of Biodiesel from Waste Cooking Oil Catalyzed by Basic Ionic LiquidStarch Based Soil Conditioner and Slow Release SystemBio-Oil Production under Sub- and Supercritical Hydrothermal Liquefaction of Oil Palm Empty Fruit Bunch and Kernel ShellAdsorption of Chlorate from Chlor-Alkali Plant Purged Brine StreamHeavy Metal Removal by Oil Palm Empty Fruit Bunches (OPEFB) BiosorbentAdsorptive Removal of Ni2+ from Aqueous Solution onto Rice Husk-Based Activated CarbonBiodiesel Production from the High Free Fatty Acid ?Hevea brasiliensis? and Fuel Properties CharacterizationDegradation Kinetic of Oxytetracycline Antibiotic inside UV Reactor in the Presence of H2O2Effect of Nanofillers on the Spreading Behavior of Biopolymer Materials on Urea SurfaceEffect of Ultrasonic Pre-Treatment Durations on the Formation of Zeolite-TReview on Extraction and Characterization of Castor Seed OilOptimization of Pectin Extraction from Nephrolepis biserrata Leaves Using Response Surface MethodologySynthesis and Dehumidification Performance of Calcium Chloride Derived from the Waste Shells of Anadaragranosa
