Buch, Englisch, 638 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
Buch, Englisch, 638 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-0357-1020-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees
Chapter 1: Materials and Technologies for Soldering and Packaging in Electronics
Intermetallic Study on the Modified Sn-3.5Ag-1.0Cu-1.0Zn Lead Free Solder
Solderability and Interfacial Intermetallic Compound (IMC) Growth of Sn-Cu-Ni Solder with Additions of Germanium
The Effects of Zinc Addition on the Microstructure, Melting Point and Microhardness of Sn-0.7Cu Lead-Free Solder Fabricated via Powder Metallurgy Method
Properties of Aluminum Matrix Composite (AMCs) for Electronic Packaging
Effects of Wetting Behavior on Gallium Addition in In-Zn Solder Alloy
The Alloying and Aging Effects on the Wettability and Intermetallic Bonding of the Sn-Zn-Cu-Bi Soldering Alloy on a Cu Substrate
Nanoindentation Study on Heat Treated Gold Wire Bonding
Directional Growth Behaviour of Intermetallic Compound of Sn3.0Ag0.5Cu/ImSn Subjected to Thermal Cycling
Nanoindentation of Sn3.0Ag0.5Cu/ENIG Solder Joint after High Temperature Storage
Solidification of Sn-3Ag-0.5Cu and Sn-0.7Cu-0.05Ni Solders
Effects of Trace Phosphorus in Sn-Cu-Ni Wave Solder Dross
Suppression of Cu3Sn with Ni in High Cu Containing Sn-Cu Solder Alloys
Peritectic Reactions and Phase Transformations of Sn-30wt%Cu for High Temperature Pb-Free Soldering Applications
XPS Analysis of Oxide Films on Lead-Free Solders with Trace Additions of Germanium and Gallium
Improvement of Sn-0.7Cu Lead Free Solder Joints on Shear Strength with Addition of Titanium Oxide (TiO2) Particles
Surface Roughness and Wettability of SAC/CNT Lead Free Solder
Wettability of CNT-Doped Solder under Isothermal Aging
Mechanical Interlocking on Leadframe Surface for Bondability of Au Wedge Bond
Ultrasonic Vibration in Leadframe for the Bondability for Au Wedge Bond
Wettability of Soldering Alloys at Heating by Electron Beam
Mechanical and Electrical Properties of Carbon Nanotubes Based Isotropic Conductive Adhesives
Chapter 2: Materials for Electronics, Optoelectronics and Electrotechnical Industry
Effect of Loading Amount of Glucose Precursor on Mesoporous Carbon Surface Area for Supercapacitor Electrode Application
Effect of Al Excess on the Band Structure of ZnO Using Density Functional Theory
Microwave Irradiation Assisted Synthesis of Silicon Carbide Nanotubes
Characterization of Silicon Carbide Nanowhiskers Synthesized by Microwave Heating Using Photoluminescence Spectroscopy and Fourier Transform Infrared Spectroscopy
Synthesis of Silicon Carbide Nanowhiskers from Graphite and Silica of Different Ratio by Microwave Irradiation Assisted Synthesis
Effect of Stoichiometry and Sintering Temperature on the Mechanical Properties of Zinc Ferrite (ZnxFe3-xO4)
p-Type Conductivity Control in ZnO Films Grown by Molecular-Beam Epitaxy
Synthesis and Characterization of Ni0.8Zn0.2Fe2O4 Nanoparticles by Self-Combustion Technique
Synthesis of Chlorophyll Thin Film from Noni Leaves via Dip Coating Process
Properties of Y3Fe5O12 (YIG) as Nanocatalyst for Ammonia Formation Produced from Magnetic Induction Method (MIM)
Response Surface Methodology (RSM) in Fabrication of Nanostructured Silicon
Chapter 3: Composite and Polymer Materials
Rigid Polyurethane Foam with Ionic Liquid Modified Multi Walled Carbon Nanotubes Composites
The Effects of Trans-Polyoctylene Rubber (TOR) on the Cure Characteristics and Swelling Behaviour of Activated Carbon Filled Styrene Butadiene Rubber (SBR) Vulcanizates
Composite Materials Characterization for Aircraft Application
The Influence of Blending Methods in Epoxy/PMMA Polymer Blend
Development of Seamless Pipe Based on Al/Al2O3 Composite Produced by Stir Casting and Centrifugal Casting
Effects of Composition and Fe on the Liquid Phase Sintered W-Brass Composites
Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading
Chapter 4: Materials and Processing Technologies for Mechanical Engineering
Control of Temperature in Cutting Zone in Machining of Alloyed Case-Hardened Steels by Applying a Ceramic Tool with Wear-Resistant Coatings
Comparative Evaluation of Properties of Various Tool Materials by Area of Indentation Track in Pendulum Scratch Testing
Edge Cutting Tools for Machining of Hard-to-Cut Materials
Specifics of Application of Cutting Ceramics with Functional Coating in Turning of High-Strength Materials
Influence of Tool Rotational Speed on the Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy
Effect of Sensitization Treatment on Corrosion Properties in Austenitic Stainless Steel 304
Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061 in Mixture of Phosphoric Acid and Oxalic Acid
The Effect of Sintering Temperature to the Microstructure of PM F75 (Co-Cr-Mo) Alloy
Two-Step Solution Heat Treatment of AlSiCu Alloy for Improvement of Mechanical Properties
A New Free-Machining Steel Containing Bismuth and Calcium
The Effect of Solution Heat Treatment on Incipient Melting of Al2Cu Intermetallic Phase in Lightweight Materials
Ageing Response of Powder Metallurgy AZ91 and AZ91 Reinforced with Multiwall Carbon Nanotube
Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0
Thermal Aging of Dissimilar-Metal Weld Joints for Reactor Pressurized Vessels at Elevated Temperature
Microstructural Evolution of Austenitic Stainless Steel AISI304 and AISI316 Subjected to High-Temperature Thermal Aging
Effect of Concentration of Oxalic Acid on the Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061
Segregation Measurement of Inconel 718 Feedstocks Used in Low-Pressure Metal Injection Molding
Precision Hole Making on Laminates Composite: Comparison between Drilling and Punching
Chapter 5: Construction Materials
Dynamic Increase Factor of High Strength Concrete with Silica Fume at High Strain Rate Loading
Experimental Study on Internal RH of BFS Mortars at Early Age
Strength of Portland Cement with Several Composition of Bottom Ash in Different Fineness with Curing Time of 28 Days
The Barriers and Strategies of Implementing the New Building Material (Fibre Cement Wall) in Malaysia Case Study: Aurum Synergy, Perlis, Malaysia
Dolomite Quarry Waste as Sand Replacement in Sand Brick
An Experiment on Bond Properties of Reinforcements Embedded in Ultra High Performance Concrete
Bond-Slip Relation of Pretensioned Concrete Members for Various Tensioning Forces
Assessment of Reinforced Concrete Building with Soil Structure Interaction Effect under Vertical Earthquake
The Temperature Effect to the Concrete due to the Single Strike of High Electric Current
Indoor Air Quality of Fired Clay Brick Incorporated with Mosaic Sludge
Leachability of Heavy Metals from Steel Mill Sludge Incorporated in Fired Clay Brick
Leaching of Heavy Metals Using TCLP and SPLP Method from Fired Clay Brick Incorporating with Mosaic Sludge
Properties of Steel Mill Sludge Waste Incorporated in Fired Clay Brick
Experimental Study of Slurry Infiltrated Fiber Reinforced Concrete
The Chemical Composition and Fineness of Natural Cement at Different Raw Meal Proportion
Effect of Chromium (II, III) Oxide and Cobalt Oxide on the Colour and Fineness of Cement
Mechanical Properties of Volcanic Ash Based Geopolymer Concrete
Potential of Geopolymer Mortar as Concrete Repairing Materials
Review on Different Types of Geopolymer Concrete Fibres
Effect of Coal Ash Properties on Compressive Strength of Bottom Ash-Based Geopolymer Concrete
Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete
Effect of NaOH Concentration on Flexural Strength, Phase Formation and Microstructural Development of Kaolin Geopolymer Ceramic
Effect of Ultra High Molecular Weight Polyethylene (UHMWPE) as Binder and Sintering Temperature in Kaolin Geopolymer Ceramics on Flexural Strength
The Use of Borax in Deterring Flash Setting of High Calcium Fly Ash Based Geopolymer
Simulation Behavior of Flexure in Reinforced Concrete Beam with Opening Reinforced with Glass Fiber Reinforced Polymer (GFRP)
Flexural Behaviour of Patch-Repair Material Made from Unsaturated Polyester Resin (UPR)-Mortar
Optical Data Support on Flexural Strength of Kaolin Coated Lumber Wood via Geopolymer Technology
Chapter 6: Biomedical Engineering and Biotechnologies
Study on a Fractional Model of Filtration Effect of Cigarette Filter Tip
Preparation and Characterization of Chitosan/Alginate Polyelectrolyte Complex Prepared by Using Calcium Tripolyphosphate Ionic Gelator
Analysis on Fluid Characteristics in Y-Shape Bifurcate Coronary Artery
Performance of Newly-Fabricated Modular Surface Plasmon Resonance (mSPR) Sensor
Simultaneous Saccharification and Co-Fermentation (SSCF) Using Banana and Pineapple Waste as Substrate
Optimization of Eugenol Ester Using Statistical Approach of Response Surface Methodology
Facile Synthesis of Activated Carbon from Swamp Taro Stalk via Single Step ZnCl2 Activation
Synthesis and Characterization of Biomass Supported Ag, Co and Ag-Co Nanoparticles
Chapter 7: Materials and Technologies for Textile Industry
Dyeing of Nylon Fabric with Natural Dye from Cassia Fistula Fruit: A Research on Effect Metal Mordants Concentration
Dyeing Silk Fabric with Natural Dye from Longan Leaves Using Simultaneous Mordanting Method
Dyeing Properties of Nylon Fabrics with Mangrove Bark Extract via Mordanting Methods
Extraction and Tensile Behavior of High Performance Hibiscus tiliceus Fiber
Printing of Silk Fabric with Reactive Dye Using Flour of Wild Taro Corm as a Resist Printing Paste
Chapter 8: Materials and Technologies for Recycling and Treatment of Industrial Waste
Removal of Iron and Manganese Using Cascade Aerator and Limestone Roughing Filter
Characterization of Alum Crystals Synthesized from Waste Aluminium Beverage Cans
Removal of Cadmium and Zinc Contaminations in Landfill Leachate by Using Electrocoagulation Process
Hot Solvent Extraction Method for Recycle Epoxy Resin in Waste Printed Circuit Board with Polyethylene Glycol
Kinetics and Isotherm Studies on Nd(III) Adsorption onto Xanthated Chitosan
Tin (Sn) Recovery from Wave Soldering Lead Free Solder Dross via Hydrochloric Acid Leaching and Combustion Treatment
Removal of Iron (Fe) in Rice Husk via Citric Acid Leaching Treatment
Acid Treatment of Aluminium Dross: Properties and Application
Chapter 9: Engineering Research and Design
Landslide Simulation Using Limit Equilibrium and Finite Element Method
Correlation of Brillouin Stokes Signals and Optical-Signal-to-Noise-Ratio in Multi-Wavelength Brillouin Fiber Laser with Additional Fiber Bragg Grating
Mathematical Modelling of Stress-Strain State of Multilayer Shell Molds
Theoretical Prediction of Crack Formation in Axisymmetric Multilayer Shell Molds
Structure Characterization of Low Cost Fabricated Soft Material Built Microchannel
Maximal Predicable Time Scale of Gas Emission about Fully Mechanized Mining Face
Numerical Simulation of Pressure Loss in Largesize Annulus of Deepwater Drilling Riser
The Shielding Materials from EM Radiation for Aircraft Fuselage
SAC-OCDMA over Indoor Optical Wireless Communication (OWC) System Based on Zero Cross Correlation (ZCC) Code
Optimization of Output Coupling Ratio for Multi-Wavelength Brillouin Fiber Laser Employing FBG and DCF as Gain Medium
