Buch, Englisch, 680 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1270 g
22nd CBECIMAT
Buch, Englisch, 680 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1270 g
ISBN: 978-3-0357-1288-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Ceramic Materials
Hydrothermal Synthesis of Zeolite a Using Non-Calcined Diatomite
Gelatinization Technique Applied to the Processing of Porous Clay Bodies
Characterization of Kaolin Residues from the Jari´ Valley Reservations Provided by Cadam S/A Company
Phase Formation in Copper and Calcium Titanate Dielectric Ceramic Obtained by Polymeric Precursor Method
Morphological and Structural Analyses in Carbonated Magnesium-Aluminum Hydrotalcites Co-Substituted with Iron III
The Effect of Iron (III) Co-Insertion in Magnesium-Aluminum Hydrotalcites Obtained by Precipitation Method at pH 11
Proppants Development and the Shale Oil and Gas Market Perspective
Analysis of the Effect of Cyclic Fatigue on the Flexural Strength of a Ceramoceramic System Used in Dental Prostheses
Characterization of Biomaterial and Tissue Response Analysis after Implantation
Comparative Analysis of the Influence of 10 and 5% Hydrofluoric Acid Etching on the Average Roughness of Lithium Disilicate Used in Dental Prostheses
ZrO2 Pre-Sintered Blocks (3%mol-Y2O3) with Color Gradient for Dental Prostheses
Synthesis and Characterization of Novel Crystalline Mesoporous Beta-Tricalcium Phosphate Nanoparticles
Study of the Zirconium and Silicon Homovalent Dopants Insertion on the Structure and Bandgap Energy of Titanium Dioxide Powders
Structural and Thermal Studies of Titanium Dioxide Gel Modified with Anatase Isostructural Zircon Silicate
Morphological, Structural, Electrical and Optical Properties of Copper-Doped Zinc Oxide Films Deposited by Spray Pyrolysis
Evaluation of the Structural, Photonic and Morphologic Effects Caused by Zinc Doping in the Titanium Dioxide Powder Samples Obtained by Sol-Gel Method
Estimate of the Nanoparticles Size of Magnetite Produced by Co-Precipitation Method
Analysis of Europium Doped Strontium Aluminate Synthesized by Route of PVA Evaporation
Structural Effects on Perovskite Phase Formation for PZT Powders Obtained by Polymeric Precursor Method
Photonic Properties of PZT Powders along the Crystallization Process of the Polymeric Precursor
Chapter 2: Building Materials
Brick Drying Simulations by Finite Volume Method
Study on the Influence of the Wastes from Cashew Industry on Environmentally Friendly Bricks
Iron Ore Tailing as Addition to Partial Replacement of Portland Cement
Sericitic Phyllite as Addition in Portland Cement
Use of Waste from Construction and Demolition in the Manufacture of Soil-Cement Bricks: A Sustainable Alternative
Phenomena of Capillarity and Drying in Gypsum Blocks: Development of Experimental Apparatus for the Characterization of Representative Specimens
Preparation and Compressive Strength Evaluation of Concrete Containing Oil Sludge as Additive
In Situ Hydration of Sulfoaluminate Cement Mixtures Monitored by Synchrotron X-Ray Diffraction
Influence of Glass Residue Addition on the Properties of Adhesive Mortar
Effect of the Addition of the Waste Generated from the Feldspar Mining on the Obtainment of Ceramic Brick
Physical Properties, Mechanical Strength and Microstructure of Fired Clay Brick Waste and Metakaolin Geopolymer Mortars
Chapter 3: Polymers and Composites
Study of the Effect of Compatibility Agents in the Incorporation of Rice Hull Ash in Polypropylene Compounds: Mechanical Properties
Hybrids Obtained from Monoglyceride of Castor Oil with Hydroxyapatite for Applications in Bioinduction of Bone Tissue: Synthesis and Characterization
Physical Properties of PHB/VMF2 Nanocomposite Microcapsules in Water
Study of Double Walled Corrugated Cardboard as an Alternative Material for Eco-Friendly Designed Furniture
Comparative Analysis of the Tensile Properties of Polyester and Epoxy Composites Reinforced with Hemp Fibers
Absorption Evaluation of Water in Panels from Elephant Grass with Eucalyptus sp. Leaves
Antimicrobial Activity of PET-Silver Nanocomposite Filaments
Study of Hybrid Membranes Prepared with the Addition of Calcium Chloride
Characterization of PET-Silver Nanocomposite Filaments
Addition of Zinc Oxide Nanoparticles in Biodegradable Polymer and Evaluation of its Antimicrobial Activity
Generation of Latex Films on Glassy Substrates by Evaporation Induced Self-Assembly (EISA) Process
Factorial Experimental Planning Applied for Evaluated Effect of Matrix Temperature and Screw Rotation Speed of Extrusion in Mechanical Properties and Dimensional Changes in PVC Pipes
Analysis of the Influence of Injection Process Parameters of Polymer Blends from Printers
Degradation of Colored Polystyrene Films
Biocomposite of Ultra-High Molecular Weight Polyethylene and Hydroxyapatite with Antibacterial Properties by the Incorporation of Zinc Oxide Nanoparticles
PA6/Sodium Clay Membrane for Application in Petroleum Sector
Effect of Drying Temperature in Biopolymeric Films of Cassava Starch and its Effect on Wettability, Water Vapor Barrier and Mechanical Properties
Influence of the Geometric Characteristics of the Mini-Implants on Mechanicals Properties Using Artificial Bone Similar to Anterior, Middle and Posterior Regions of the Jaws
Active Packaging Using Orange Oil Incorporated into PBAT Biodegradable Films
Chapter 4: Steel, Alloys, Metallurgical Technologies
Micromechanical Modeling of Dual-Phase DP600 Steel Sheet Plastic Behavior Based on a Representative Volume Element Defined from the Real Microstructure
Modeling and Simulation of Nucleation and Growth Transformations with Nucleation on Interfaces of Kelvin Polihedra Network
Evolution of Individual Grains in 3d Microstructure Generated by Computational Simulation of Transformations Involving Two Phases
Micromechanical Modeling of DP600 and DP800 Steels Plastic Behavior Based on the Mori-Tanaka Homogenization Method
Effects of Heat Input Conditions on the Local Thermophysical Properties of Super Duplex Stainless Steels
Study of Wear on Nicraly Coating Sprayed by HVOF on 316 Steel and Laser CO2 Remelting Process
Effect of Niobium and Heat Treatment on the Microstructure and Mechanical Properties of SAE 8620 Steel
Effect of Controlled Cooling after Hot Rolling on the Mechanical Properties of a Low Carbon Niobium Microalloyed Steel Wire Rod
Effects of Different Annealing Times on Microstructure and Tensile Properties of Joints Welded 5052 Aluminum Alloy in Marine Industry
Effect of Cooling Rate on the Transformation Temperatures of Ni50Ti36Hf14 Melt-Spun Ribbons
Limit Strains Analysis of Advanced High Strength Steels Sheets Based on Surface Roughness Measurements
Determination of Mechanical Properties for Microhardness Mapping in a 5052 Aluminum Alloy Welded by Mig Process
Evaluation of the Bactericidal Properties of the Biomimetic Coating of Ha Doped with AgNO3
Electrochemical Behavior of Hot Treated Ti-12Mo-8Nb Alloy
Effect of Solution Annealing Time on the Microstructure and Corrosion Resistance of Duplex Stainless Steel
Influence of Strain Amplitude on the Functional Properties and Aging at Room Temperature of a Superelastic NiTi Alloy
Analysis of Mechanical and Micro-Structural Properties of Shaft Tips Manufactured in ABNT 1045 Steel Applied in Transportation Ore Fractured Early
Observations on Dynamic Strain Aging Manifestation in Inconel 718 Superalloy
Study of the Abrasion Resistance of Fe-Cu-Nb and NEXT 100® Metallic Matrices for the Manufacture of Diamond Tools
Relationship between Electrical Conductivity and the Stage of the Heat Treatments of Aging and Overaging of the Aluminum Alloy AA2024
Study of the Correlation between Microstructure and Corrosion Resistance of the AZ91D Magnesium Alloy
Comparative Analysis of Wear Behavior of Al 7075 Alloy, AISI 1020 and AISI 1045 Carbon Steels
Evaluation of Spheroidization on Erosive Wear of ASTM A106 Steel Used in Heat Exchangers
Effect of Passivation Treatment on Adhesion and Protective Properties of Steel Coated with Polymeric Film
Influence of GPTMS Precursor Concentration as Pretreatment of Galvanized Steel
Behavior of Polypyrrole Film Chemically Polymerized with Lauric Acid on Copper Surface
Influence of Alloying Elements Zr, Nb and Mo on the Microstructure and Magnetic Properties of Sintered Pr-Fe-Co-B Based Permanent Magnets
Influence of Milling Time on Magnetic Properties and Microstructure of Sintered Nd-Fe-B Based Permanent Magnets
Comparison between Magnetic Anisotropy Energy and a Parameter to the Assessment of Magnetic Property of Electrical Steel
Recycling Chips of Stainless Steel by High Energy Ball Milling
Study of the Thermal Diffusivity Variation in Thin Duplex Steel Plates Welded by GTAW Process
Influence of Thickness on Magnetic and Microstructural Properties in Electrical Steels Semi-Processed of Low Efficiency
Diffusion Analyses Using GDOES Technique of the 22MnB5 Press Hardened Steel with Al-Si and Zn-Ni Coatings
Ellipsometric Characterization of AZ31 Magnesium Alloy
Effect of Copper and Magnesium on the Microstructure of Centrifugally Cast Al-19%Si Alloys
Corrosion Characterization of AISI 304 Stainless Steel Filter
Study on the Viability of the Recycling by Electric Arc Melting of Zirconium Alloys Scraps Aiming the Scalability of the Process
Microstructure Optimization in d-TRIP Steels with Al and Nb
Evaluation of the Residual Stress and Microstructure of Extruded and Shot Peened Aluminum Alloy 6082
Microstructural Evaluation of a 5052 H34 Aluminum Alloy Used in Multilayered Armor
Development of a Microtorquemeter for the Evaluation of the Implant Abutment Interface Behavior
Mechanical Properties of NiTi Shape Memory Alloys Welded Joints: A Comparative Study between the GTAW, PAW and LBW Processes
Chapter 5: Technologies of Environmental Engineering
Dechroming: An Alternative Treatment for Leather Shavings, to Obtain a Biocompatible Collagen without Environmental Impacts
Characterization of Galvanic Sludges Waste Derived of the Metal Plating Industry from Cariri Region, Northeastern of Brazil
Evaluation of Microstructural Phenomena in the Utilization of Porcelain Tile’s Shards to Obtain New Ceramic Materials
Photo-Oxidation of Tetracycline Adsorbed in Clayand in Aqueous Suspension
Kinetics Modelling of the Adsorption Process of Zinc Ions by Glass Microparticles
Use of Retorted Shale as Sulfur Adsorbent
The Use of Palygorskite as a Catalytic Support for TiO2 on the Degradation of Herbicide: A Review
Development of Asymmetric Ceramic Membranes Coated with Residue of Granite for Use in Wastewater Treatment
Characterization of Coal Fly Ash for Use in Synthesis of Zeolites
Residue Characterization from Polishing Granite Submitted to the Hydrocycloning Process
Assessment of the Photocatalytic Efficiency of TiO2 in the Presence of Sulphate
Chapter 6: Materials in Energy and Measurements
Electrochemical Characteristics and Microstructures of Activated Carbon Powder Supercapacitors for Energy Storage
Horseradish Peroxidase Immobilized on Polyaniline onto Monocrystalline Silicon for Glyphosate Herbicide Detection
The Production of Reduced Graphene Oxide by a Low-Cost Vacuum System for Supercapacitor Applications
Chemical and Physical Variations on Cotton Wires
Selective Copper Oxide Coating on Aluminum Panels for Solar Heating Absorption
Synthesis and Characterization by Ellipsometry of Cationic Membranes for Fuel Cells
Processing and Characterization of ZrO2-TiO2 Porous Films by Dip Coating for Application as Environmental Sensors
Effect of Hydrogen Decrepitation Pressure on the Particle Size of Rare Earth Based Alloys for Ni-Mh Battery Production
