Buch, Englisch, 778 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1400 g
Main Tendencies in Applied Materials Science
Erscheinungsjahr 2016
ISBN: 978-3-03835-752-0
Verlag: Trans Tech Publications
Methods of synthesis, processing and analysis of different materials, advanced approaches in modern Materials Science and industrial technology.Methods of Solid-state science for application in different areas of materials research.
Buch, Englisch, 778 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1400 g
ISBN: 978-3-03835-752-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Organizing Committee, Organizers and Sponsors
Chapter 1: Metal and Alloys
Electrochemical Migration Behaviours of Low Silver Content Solder Alloy SAC 0307 on Printed Circuit Boards (PCBs) in NaCl Solution
Effect of Ta Addition on Microstructure and Hardness of FeCrNiMnCoTax and Al0.5FeCrNiMnCoTax High-Entropy Alloys
An Evaluation of Microstructure and Hardness Properties of Zr Added FeNiAlCoCr High Entropy Alloys
Assessment of Mechanical Properties of Cold Formed Steel Material at Elevated Temperature
Characteristic of Modified Geometrical Open-Cell Aluminum Foam by Casting Replication Process
Chapter 2: Ceramics and Glasses
Effect of Au NPs on the Spectral Modification of Er-Doped Zinc Sodium Tellurite Glass
Gold Nanoparticles Stimulated Surface Plasmon Resonance Effects in Erbium-Zinc-Sodium-Tellurite Glass
Reactivity Study of LaSrCoFeO3 - Ba(Ce,Zr)O3 Composite Cathode Material
Effect of Samarium Nanoparticles on Optical Properties of Zinc Borotellurite Glass System
The Preparation and Physical Characteristic of Sm3+ Doped Borotellurite Glass
Luminescence Properties of Eu3+ and Dy3+ Doped Magnesium Tellurite Borophosphate Glass
Magnetic Properties of Sm3+ Doped Zinc Phosphate Glass Containing Nickel Oxide Nanoparticles
Tuning Surface Plasmon in Erbium-Boro-Tellurite Nanoglass via Thermal Annealing
Effects of H2 and CO on Electrical Properties of Pure SnO2 and Pt-Doped SnO2 Ceramics
Luminescence Features of Silver Nanoparticles Sensitized Samarium Doped Boro-Zinc Tellurite Glasses
Physical and Electrical Properties of Cullet-Paper Ash-Kaolin Clay Ceramic
Effect of Sm3+ Concentration on Physical Properties of Magnesium Tellurite Glasses Containing Silver Nanoparticles
Stability of ZnO-Pr6O11-Cr2O3 Varistor Ceramics against Electrical Degradation
Structural Characteristics of Er3+ and Nd3+ Doped Lithium Niobate Tellurite Glass
Luminescence of Er3+/Nd3+ Co-Doped Lithium Niobate Tellurite Glass
The Ligand Fields Characterizations within Erbium-Tellurite Glass Network via Gold Nanoparticles Concentration Variation
The Sintering Effect of Lanthanum-Calcium Manganite Doping on Microstructure and Non-Linear Coefficient of Zinc Oxide Varistor
Absorption Features and Luminescence Enhancement of Tellurite Glass Embedded with Metallic Nanoparticles
The Structural and Conductivity Characterization of P2O5-MgO-TiO2-Li2O Glass Ceramic Embedded with Nickel Nanoparticles
Influence of Erbium Doping on Dielectric Properties of Zinc Borotellurite Glass System
Effects of EAF Slag’s Milling Time and Firing Temperature to EAF Slag Added Ceramic Tile’s Properties
The Effect of PbO on the Physical and Structural Properties of Borate Glass System
Effect of Neodymium Concentration on Structural and Optical Properties of Tellurite Based Glass System
Preparation of SiO2-Na2O-CaO-P2O5 Glass-Ceramic from Waste Materials and Heat Treatment Effects on its Morphology
Optical Properties of Nd Doped Lead Borotellurite Glass
Microstructure of Barium Cerate-Zirconate Ceramics Prepared by a Two-Step Sintering Technique
Role of Ionics Surfactant in Synthesizing Cerate-Zirconate Ceramic Powder
Ba0.5Sr0.5Co0.8Fe0.2O3-d (BSCF) Perovskite Nanorods by Template Synthesis
The Suitability of Rice Straw Ash as a Precursor for Synthesizing ß-Wollastonite
Chapter 3: Optical and Photovoltaic Materials and Devices
Composition Effect of Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulphonic Acid) and Polyaniline to Dispersion and Optical Properties of Polymer Blends
Optimization of Silicon-Based Fabrication Process Modeling for Optical Modulator
Optical Characterization of Zinc Selenide Compound Prepared through Hydrothermal Method
Quantum Confinement of Integrated Pulse Electrochemical Etching of Porous Silicon for Metal Semiconductor Metal Photodetector
Mixture of Zinc Oxide Microrod and Poly(3-Dodecylthiophene) with Melastoma malabathricum Dye for Hybrid Solar Cell
Electrical Conductivity and Hall Effect Study of Organic Solar Cell Using Downy Rose Myrtle Berries as Natural Dye: A Heat Treatment
Visible Luminescence of Nanoporous Silicon Using Alternating Current Photo-Assisted Electrochemical Etching for Potential MSM Photodetector
Structural, Morphological, Photovoltaic and Electron Transport Properties of ZnO Based DSSC with Different Concentrations of MWCNTs
Effects of CH3NH3PbI(3-x)Clx Perovskite Layer on the Performance of Inverted Type Hybrid Organic Solar Cells Based on ZnO/P3HT
Influence of Graphene (0.01 wt. %) on Structural, Morphological and Photovoltaic Properties of TiO2-Based DSSC Using Electrolyte Gel
Chapter 4: Dielectrics, Magnetic Materials and Semiconductors
Dielectric and Conduction Processes and Behaviours in Ni0.3Zn0.7Fe2O4
Optical, Thermal and Dielectric Studies of Silver-Silica Nanoparticles Synthesized via Sol-Gel Technique
Dielectric Properties of Li-Zr Modified NiO at High Frequency
Fabrication and Characterization of TiO2-Doped ZnAl2O4 Nanocrystals via Sol-Gel Method for GPS Antenna
Effect of Sr Substitution in La-Ca-Mn-O Compound on Structural and Electrical Properties
The Effect of Sintering Temperature on the Structural and Magnetic Properties of Ni-Mg Substituted CoFe2O4 Nanoparticles
Structural and Optical Studies of Undoped Porous GaN Prepared by Pt-Assisted Electroless Etching
Influence of Microstructural Evolution on the Magnetically Group Dominance in Polycrystalline Y3Fe5O12 Multi-Samples
Surface Passivation Effect of Hydrogen and Methyl on the Structural and Electronic Properties of Silicon Quantum Dots: Density Functional Calculation
Synthesis and Electrical Studies of Quaternary Chalcogenide Semiconductor Cu2ZnSnSe4
Magnetic Properties and Microstructures of Cobalt Substituted Barium Hexaferrites Derived from Steel Waste Product via Mechanical Alloying Technique
Effect of Variation Sintering Temperature on Magnetic Permeability and Grain Sizes of Y3Fe5O12 via Mechanical Alloying Technique
Preparation and Characterization of Sr1-xNdxFe12O19 Derived from Steel-Waste Product via Mechanical Alloying
Effect of Sintering Temperature on Properties of Multiferroic BaFe12O19/MgFe2O4/BaTiO3 Composites
Influence of Parallel Evolving Microstructure on Thermal Diffusivity in Strontium Titanate
Chapter 5: Nanoscience and Nanotechnologies
Plasticized and Nanofilled Poly(Lactic Acid) Nanocomposites: Mechanical, Thermal and Morphology Properties
The Treated Cellulose Micro/Nano Fibers (CMNF) from Bioresources in Malaysia
Physicochemical Study of 3,4-Dichlorophenoxyacetic Acid Intercalated into Hydrotalcite-Like Compound by Ion Exchanged Method
Cellulose Microfibrils/Nanofibrils (CMNF) Produced from Banana (Musa acuminata) Pseudo-Stem Wastes: Isolation and Characterization
Morphological, Structural and Optical Properties of Mg Doped ZnO Nanostructured Growth by Aqueous Solution Method
Properties of Al-Doped ZnO Nanorods Synthesized Using Low Temperature Hydrothermal Method
Microwave Absorption Study of Polyaniline Nanocomposites with Different Dimension of Multiwalled Carbon Nanotubes
Characterization of Cu-Al2O3 and Ni-Al2O3 Nanocomposites Electrodeposited on Copper Substrate
Mechanochemical Synthesis of CNT/ZnO Hybrid Materials
Ultra-Sensitive Breath Sensor Device for Sleep Disorder Monitoring and Clinical Studying
Chapter 6: Electrochemical Materials and Devices
Ti Doped LiMn1/3Co1/3Ni1/3O2 for Li-Ion Battery Application
Review of Energy and Power of Supercapacitor Using Carbon Electrodes from Fibers of Oil Palm Fruit Bunches
Conductivity and FTIR Studies of NaI-Na3PO4-PLL Electrolyte for Solid State Batteries
Effect of 1-Ethyl-3-Methylimidazolium Nitrate on the Electrical Properties of Starch/Chitosan Blend Polymer Electrolyte
Electrical Impedance Spectroscopy and Fourier Transform Infrared Studies of New Binary Li2CO3-LiI Solid Electrolyte
X-Ray Diffraction and Infrared Studies on Plasticized Cellulose Acetate Complexed with Ammonium Iodide for Solid Polymer Electrolyte
Effects of Dodecanoic Acid Modified SIO2 on Filler Dispersion and Ionic Conductivity of PMMA/ENR 50/LIBF4 Electrolytes
Electrochemical Properties of Glyme Based Plasticizer on Gel Polymer Electrolytes Doped with Lithium Bis(Trifluoromethanesulfonyl)Imide
Characterization of Proton Conducting Carboxymethyl Cellulose/Chitosan Dual-Blend Based Biopolymer Electrolytes
Electrochemical Characterization of Supercapacitor Electrodes Prepared by Activation of Green Monoliths Consist of Self-Adhesive Carbon Grains and Lignin
Effect of KOH Treated Graphene in Green Monoliths of Pre-Carbonized Biomass Fibers on the Structure, Porosity and Capacitance of Supercapacitors Carbon Electrodes
Chapter 7: Superconductor
Charge Distribution in YBa2Cu3O7 and YBa2Cu4O8 by Density Functional Theory
Effect of Eu Substitution in Low Density Bi (Pb)-2223 High Temperature Superconductors
Influence of Rare-Earth (Doped) on Low-Density Bi1.6Pb0.4Sr2Ca1.9RE0.1Cu3Od (RE=Nd, Er) Superconductors via Co-Precipitation Method
The Influence of Ce-Doping on Structural and Superconducting Properties in Low-Density Bi1.6Pb0.4Sr2Ca2-xCexCu3Oy Superconductor
Electrical and Structural Properties of Ca Substitution in High and Low Density Y(Ba1-xCax)2Cu3O7-d Superconductor
Superconducting and Elastic Properties of PbBa2Y1-xCaxCu3O7+d
Chapter 8: Thin Film Materials and Devices
Density Functional Study of Electronic and Optical Properties of Ternary Mixed Chalcogenides Topological Insulators
Influence Different Compositions of (1-x)ZnFe2O4 – xSiO2 Nanostructures Thin Film Synthesized by Sol-Gel Method
Polarized Infrared Reststrahlen Features of Wurtzite InGaN Thin Film
Thickness Dependent on Energy Band Gap and Electrical Conductivity of Undoped Conjugated Polymer Thin Films
Effect of Annealing Temperatures in Oxygen on the Structure and Magnetic Properties of Yttrium Iron Garnet (Y3Fe5O12) Films Prepared by a Sol-Gel Method Followed by a Spin Coating Technique
Lattice Strain Effect in Structural, Magnetoresistance and Electrical Properties of La0.67Sr0.33MnO3 Bulk and Thin Film System
Fabrication and Characterization of PANI-Ag-Co Nanocomposite Thin Films as Microbial Sensor for E. coli Detection
Radio-Frequency Sputtering Growth of Indium Nitride Thin Film on Flexible Substrate
Influence of Deposition Time on Bonding and Morphology of Amorphous Carbon Nitride Thin Films
Chapter 9: Polymers, Composites, Compounds and Biomaterials
Enhancement of Tensile Properties of Surface Treated Oil Palm Mesocarp Fiber/Poly(Butylene Succinate) Biocomposite by (3-Aminopropyl)Trimethoxysilane
Synthesis and Characterization of Biodegradable Starch-Based Bioplastics
Isolation of Microfibrillated Cellulose (MFC) from Local Hardwood Waste, Resak (Vatica spp.)
Effect of Sugarcane Bagasse Ash as Filler in Hot Mix Asphalt
Synthesis of Waste Cooking Oil-Based Polyol Using Sugarcane Bagasse Activated Carbon and Transesterification Reaction for Rigid Polyurethane Foam
Photocatalyst Composites of Luminescent Trinuclear Copper(I) Pyrazolate Complexes/Titanium Oxide for Degradation of 2,4-Dichlorophenoxyacetic Acid
Scratch Hatch and Nanoscratch Evaluation of Silicone-Dammar Coating as Soft Coating Resin Materials
Copper(II) Porphyrin as Biomimetic Catalyst for Oxidation of Trimethylphenol
Friedel-Crafts Acylation of Anisole over Heteropoly Acid Supported on Porous Montmorillonite
Chapter 10: Solid State Theory, Simulation and Computation
First-Principles Study on Structural, Electronic and Optical Properties of TiO2 for Dye-Sensitized Solar Cells Photoanode
Structural, Electronic and Optical Properties of Nd-Doped Anatase TiO2 for Dye-Sensitized Solar Cells from Density Functional Theory
First Principles Study on Structural and Electronic Properties of PZT and PSnZT Using Density Functional Theory
Non-Resonance Acousto-Optics Signal Analysis from Photonics Microphone Using 1 mW Laser
