Properties and Testing Techniques of Inorganic Materials II

7th TEIM 2016
Erscheinungsjahr 2017
ISBN: 978-3-03859-593-9
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 726, 624 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

This book comprises papers presented in the Seventh Annual Meeting on Testing and Evaluation of Advanced Materials, which was held from April 20 to 22, 2016, in Xi'an, China. Collected papers covered most aspects of analysis techniques for chemical composition and microstructures, testing techniques on mechanical, chemical, and physical properties of advanced materials (mainly inorganic materials, including ceramics, glasses, concretes, synthesized crystals, etc.) and reflects the newest developments in these fields in China.

Autoren/Hrsg.

Bao, Yi Wang

Jiang, Danyu

Gong, Jianghong

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Werkstoffprüfung

Inhaltsverzeichnis

Effect of Preparation Process on Bending Modulus and Strength of Fiber Tubes in Radial DirectionAn Improved Cross-Bonded Method for Measuring Interfacial Bond Strength of AdhesivesAn Introduction to Dynamic Load Test on Photovoltaic ModulesResearch of Nominal Operating Temperature Testing Method of BIPV ModuleThe Analysis of Influence Factors in Cement Strength TestNew Characterization Method of Hot Metal Penetration Resistance for Blast Furnace Carbon BlocksCharacterization of Test Methods of Capillary Pressure of Cement-Based MaterialsAnalyze of the Stress-Birefringence of the Fused Silica with Large ApertureDetermination of Phthalate Esters in Plastic Track Surface Layer Material by Gas ChromatographyFluoride Determination by Ion Chromatography in Fluorocarbon CoatingsComposition Analysis of an Unknown Redispersible PowderCorrection of Loss on Ignition in Slag Powder by ICP-AESDetermination of ZrO2 and TiO2 in Alkali-Resistant Fiberglass Mesh by ICP OESICP-AES Determination of Sulfide and Sulfate Content in Pebble and Crushed StoneIon Chromatography for the Continuous Determination of Sulfite and Sulfide in Gypsum and Gypsum ProductsPreliminary Discussion of the Detection Method for AsbestosMeasurement of Multilayer Film Thickness Using X-Ray Fluorescence SpectrometerRheological Measurement of In Situ Preheating Polycarbosilane MeltDetermining Zero Shear Viscosity of Polycarbosilane MeltsDetermining Anisotropic Young?s Modulus of Ceramic Coatings by the Relative MethodMeasurement for Elastic Modulus of Ultra-Thin Glass by Cantilever Beam MethodEvaluating Thermal Expansion Coefficient of SiC Coatings by Relative MethodMonitoring Early Hydration of Concrete with Ground Penetrating RadarPatent Analysis of Concrete Testing TechnologyStructure and Characteristics of Carbon Nanotube Reinforced SiC CompositeThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of KD-II SiC Fibers in AirEffects of Fiber Pre-Oxidation on Mechanical Properties and Microstructure of T700 Carbon Fiber Reinforced Mini C/SiC CompositesMicrostructure and Mechanical Properties of ZrB2-SiC-ZrSi2 Composites Fabricated by Spark Plasma SinteringOxidation Behavior of Si-B-C-N Multiphase CeramicThe Effect of Point Defects Induced by Fast Neutron Irradiation on the Thermal Conductivity of Boron CarbideBoron Carbide Hollow Microspheres Prepared by Polymer Derived MethodInfluence of Synthesis Process on Coated Properties of Al(OH)3-Y(OH)3/ZrB2 Composite PowdersRheological Properties and Ceramization Mechanism of ZrO2 Preceramic SolutionResearch on Optical Property of Black-Colored Zirconia Ceramics by Photoluminescence, Raman and Visible Reflectivity SpectraMicrostructures and Mechanical Properties of Y2O3 CeramicsPreparation of Superfine Alumina Powders via Hydrothermal MethodDensification Mechanism of Al2O3/Al Metallic Ceramics Prepared via Powder Metallurgy MethodMechanism of Controlled Pore Structure of Quartz Pore Gradient MaterialsSynthesis of Silica Aerogel Using Silica Sol by Ambient Drying MethodSynthesis and Characterization of Pd/Ag/SiO2 Nano-Composite MaterialsPreparation and Microwave Dielectric Properties of xBaZn2Ti4O11-(1-x)BaNd2Ti4O12 CeramicsEffect of Nd2O3 on the Microwave Dielectric Properties of 0.67CaTiO3-0.33LaAlO3 CeramicsSintering Behavior and Microwave Dielectric Properties of Li2O-B2O3-SiO2 Doped 0.67CaTiO3-0.33LaAlO3 CeramicsDomain Walls and Thermal Aging Stability of (K,Na)NbO3-Based Ceramics in Tetragonal PhaseReflectivity and Laser Ablation Behavior of La1-xSrxTiO3+d CoatingEffect of Pore Size on Partial Discharge in Ultra-High Voltage Ceramic CapacitorsThe Investigation of Perovskite LaCo0.6Ni0.4O3-d as Cathode Interface Contact Material for Intermediate Temperature Solid Oxide Fuel CellsSynthesis and Conductivity Investigation of Cu Doped Apatite Type Lanthanum Silicate ElectrolyteInfluence of Different Gd3+ Doping on the Upconversion Luminescence Properties and Morphology of NaYF4:Yb,ErInvestigation on the Preparation and Properties of Monodispersed Spherical Y2O3:Dy3+ PhosphorInvestigation on Synthesis and Property of Tb3+/Dy3+ Co-Doped Gd3Al5O12 PhosphorPhotoluminescence Properties of SrSi2O2N2 Doped with Divalent Ytterbium Phosphor in Nitrogen-Rich CoordinationSurface Morphology and Phase Transitions of Anodic TiO2 Films Induced by Hydrothermal ExposureMeasurement and Characterization of CeO2-TiO2 Ion Storage Films for Electrochromic DevicesTA Assisted Synthesis and Properties of Porous ZnOInfluence of CeO2 Doping on Property of SnO2 CeramicsEffect of the Ratio of Co to Ni+Co on the Microstructures and Mechanical Properties of Ti(C, N)-Based CermetsHot-Press Sintering of Tic0.5N0.5-Based Cermets: Addition Effect of AlN Nano-Powder on Microstructure and Mechanical PropertiesEffect of Deposition Time on Hardness and Bonding Strength of Magnetron Sputtered TiN Coatings on 316 Stainless SteelControlled Preparation and Characterization of Titanium Series Functional Pigment and its Application in CoatingsComparison of Mo-10Nb Alloy Target Materials Prepared by Different TechniquesThe Electrochemical Deposition of Fe Nanowires and the Influence of Current Density on the Deposition RateFluorescence Enhancement of Europium-Doped Yttrium Oxide Nanosheets Modified by HTTAHeterojunction Structure ZnO/TiO2 Nanorods with Enhanced Photoelectrochemical PropertiesApplication of Improved BP Neural Network in the Preparation Processing of the CaCO3 NanocrystallineBentonite-Copolymer Composite for Removing Basic FuchsinThe Preparation of Magnesium Hydroxide WhiskersDetermination of Formaldehyde in Water-Borne Coatings by HPLCFacile Synthesis and Photocatalytic Performance of W18O49 NanorodsEffect of Reaction Time on the Morphology and Photocatalytic Property of ZnO NanoparticlesPreparation of Hollow Fiber Membrane Precursor from Glass and PVDF by Non-Solvent Induced Phase SeparationLaser Induced Damage in Fused Silica for 248 nmMicrostructural Study on the Low Density SiO2 Soot BodyGlass Surface Stress Measurement and DigitalizationProperties Characterization of MgO-Cr2O3-ZrO2 Brick Prepared by Vacuum ImpregnationEffects of Sintering Temperature on Phases, Microstructures and Properties of Fused Silica CeramicsDeep Wet Etching Uniformity of Polished Fused Silica GlassInfluence of Ionizing Gas Flow on Structural Homogeneity of Type IV Silica GlassAnalysis of the Test Method of Quartz Glass Optical HomogeneityTest and Analysis of Hydroxyl Group in CVD Synthetic Silica GlassFlame Temperature Distribution and SiO2 Particles Distribution in Oxyhydrogen FlameThe Effects of Surface Treatments, Compression Speeds and Sample Sizes on Compression Load and Strength of Foam GlassDetermination of Chemical Composition in Zircon-Refractory Material by MLD MethodEffect of Additives and Carbon Resources on Thermal Shock Resistance of Spinel-C MaterialThe Improvements for the Siliceous Self-Flow Castable with Adding Nano SiO2Application of Electromagnetic Field Theory in the Study of Iron-Rich Slag Resistance Mechanism of Low Carbon MgO-C RefractoriesEffects of Matrix Densification Based on Particle Packing on Lightweight Al2O3-MgO CastablesApplication of Molten Salt Method in Hercynite Composite Powder Synthesis at Elevated TemperatureStudy of Three-Dimensional Optical Homogeneity of Fused Silica Prepared by Chemical Vapor DepositionPreparation and Anisotropic Lattice Thermal Expansion of Hexagonal CordieriteResearch Progress of Plugging Agent in Construction EngineeringPrimal Study on Mechanical Properties of Phosphate Based GeopolymerRedispersible Polymer Powder-Modified Sulphoaluminate Cement MortarThe Restoration of Compressive Strength of Self-Healing MortarWater Absorption and Hydration Products of Metakaolin Modified MortarPreparation and Mechanical Performance of Sulpoaluminate Cement by Using Industrial Solid WastesActivity Evaluation of a Tailing in a Cementitious SystemShrinkage Properties of Cement-Silica Fume Blended Pastes in Early AgePolymer-Modified Cement Waterproofing Coating and Cementitious Capillary Crystalline Waterproofing Materials: Mechanism and ApplicationsStudy on the Influence of Stone Dust on Adaptability of Polycarboxylate Superplasticizer and CementThe Effect of Concrete Mix Proportion to the Air Bubble Spacing Coefficients of Hardened ConcreteThe Room Temperature Synthesis and Performance Study of Cationic Polycarboxylate SuperplasticizerExperimental Study and Numerical Analysis on Chloride Diffusion Coefficient of Concrete with Various Water-Cement RatiosFracture Properties of Ultra-High Strength Cement-Based MaterialsStudy on the Reduction of Radon Exhalation Rates of Concrete with Different Activated CarbonIdentification of Fe-Containing Phase in Oxidation Process of BOF SlagDynamic Hydrothermal Synthesis of Super-Low Density Xonotlite Thermal Insulation Materials from Industrial Quartz PowderStatic Modulus of Ettringite in Different EnvironmentThe Effect of Pore Structure and Water Absorption on Carbonation Resistance of Sulphoaluminate Cement Foam MaterialsEffect of Surface Vitrification on the Properties of Insulation Board of Expanded PerliteTest and Optimal Design of New Type Aluminum-Plastic Composite Panel

Über Autor(innen)

Eds. Yiwang Bao, Danyu Jiang and Jianghong Gong