Sonstiges, Englisch, Band Volume 680, 606 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
This book comprises 117 papers presented in the Sixth Annual Meeting on Testing and Evaluation of Advanced Materials, which was held from April 23 to 25, 2015, in Chengdu, China. It covered most aspects of analysis techniques for chemical composition and microstructures and testing techniques on physical properties of advanced materials (mainly inorganic materials, including ceramics, glasses, concretes, synthesized crystals, etc.) and reflects the newest developments in these fields in China.
Sonstiges, Englisch, Band Volume 680, 606 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-03859-533-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Design and Application of Testing Equipment for Determining the Mechanical Properties of Ceramics at Ultrahigh TemperaturesEvaluating High Temperature Modulus and Strength of Alumina Tube in Vacuum by a Modified Split Ring MethodDetermining Elastic Modulus of Ceramic Coatings at Elevated Temperature Using Impulse Excitation TechnologyBackscattered Electron Imaging and Image Analysis Technology for Determining the Fly Ash Content in Hardened Cement MortarOn the Characterization Method of Nano Boron Nitride Material Based on AFM
In Situ Measurements of Raman Spectra for PLZT Ceramics under Compressive StressesMapping Nanoscale Switching Behavior of PZT Domain Patterns by Scanning Probe MicroscopeAnalysis of the Effect of Interferometer Cavity Distortion on Homogeneity Tests of Large-Diameter Optical MaterialsOn the Methods for Measuring High Temperature Resistivity of GlassSemiquantitative Test Method for Degradation Ratio of Vacuum Degree of Vacuum Glazing by Photoelastic MethodDetermination of Chloridion Content in the Cement by Ion ChromatographDetermination of Cl- in Concrete Materials by Ion ChromatographyA New Method for Studying the Damage in Concrete Subjected Single Face Salt Freezing CyclePatent Map Analysis of Measurement TechnologyStudy on the Methods for Measuring Closed Cell Content of Cellular Glass and its Thermal Insulation PerformanceFinite Element Analysis of Head-Form Impacting Laminated Glass for Automotive WindscreensMLD Method for the Determination of Major Components in MgO-Cr Refractory ProductsNumerical Simulation of Powder Dispersion Performance by Different Mesh TypesHigh Temperature Oxidation Behavior of Silicon Carbide CeramicInfluence of Density on the Microstructure, Mechanical, Electrical and Thermal Properties of Recrystallized Silicon CarbideShape and Distribution of Pores in SiC Ceramic Membrane Supports Formed by Extrusion MoldingEffects of Silicon Particle Size on the Morphology of Rod-Like Si3N4 Crystals Prepared by SHS MethodDistribution Status of Trace Oxygen in Fe3Si-Si3N4Spinnable Sol Prepared by NHSG Method Used for Mullite Continues FiberOn the Factors Influencing the Liquidity of Slip Casting Al2O3 SlurryKinetic Studies on Crystallization and Grain Growth of Amorphous Al2O3-ZrO2 PowderEffects of Withdrawal Speeds on Properties of ZnO Thin Films Prepared by Sol-Gel Immerse TechniquePreparation and Properties of SiO2/Al2O3-SiO2 Fiber Mat Composite MaterialsSynthesis Mechanism of ZrB2@A12O3-Y2O3 Composite Powders with Core-Shell MicrostructureThermal Stability of Aluminum Titanate CeramicsCrystal Growth and Fracture Behavior of Solidified TiC-TiB2 Prepared by Combustion Synthesis in High-Gravity FieldMachinability and Material Removal Mechanism of Face Centred Cubic (FCC) Conductive Ceramic TiBCN in EDM ProcessingMicrostructure, Densification and Mechanical Properties of TiB2-TiC-NiAl Ceramic-Based CompositeReaction Fusion and Spatial Span-Scale Microstructure Evolution of TiB2-Based Ceramic and Metal Achieved by High Gravity FieldSpatial Span-Scale Microstructure Evolution and Ballistic Performance of Laminated Functionally Graded Composites of TiB2-Based Ceramic and Ti-6Al-4V AlloyReaction Fusion and 3D-Network Span-Scale Graded Microstructure Evolution in Laminated Composite of TiB2-Based Ceramic and 42CrMo SteelCeramic-Metal Functionally Gradient Multilayer Composite Fabricated by Combustion Synthesis in High-Gravity FieldHigh Temperature Bonding Effect of the Room-Temperature-Curing Phosphate Adhesive for C/C CompositesStructure and Dielectric Properties of Ce and Ca Co-Doped BaTiO3 CeramicsSynthesis and Characterization of LiZn Ferrites/Carbon Nanotubes (CNTs) Temperature Control BiomaterialsPreparation and Photocatalytic Properties of La, Ceand Nonmetal N Co-Doped TiO2Preparation and Performance of Mesoporous TiO2 Photocatalyst with P123 as TemplateSynthesis of Pyrochlore-Type K2Ta2O6 with High Photocatalytic Activity for Dye DegradationCombustion Synthesis of La0.65Sr0.35MnO3 and its Sensing Properties for NO2Potentiometric NO2 Sensor Based on YSZ and WS2The Mechanism of Controlling Pore Microstructure for YAG Porous CeramicsSynthesis and Characterization of a Novel Mechanoluminescence Material NaAlSiO4:Eu2+, Ln3+Silica Encapsulation of SrAl2O4:Eu2+, Dy3+ Phosphors by Sol-Gel MethodThe Morphologies and Photoluminescence of Ce3+-Doped 0.5La2O3-2SrO-0.5Al2O3 Phosphors with SrF2Synthesis and Electrochemical Properties of Functionalized Graphene Oxide/ZnO CompositesInfluence of the Preparation Process on the Electrochemical Properties of xLiFePO4?yLi3V2(PO4)3/C Nano-Sized Composite Cathode MaterialsEvaluation of the Corrosivity of CaF2 in Hot Water and 10mol%HF SolutionPreparation and Properties of 3mol%YF3-CaF2 NanopowderMicrostructure and Corrosion Behaviour of Laser-Clad Double-Ceramic-Layer Composite CoatingPreparation and Properties of CaF2 Nano-PowderThe Solution Dependence of Cu Modification During the Synthesis of ?-Fe2O3 NanoparticlesInvestigation on Properties of the Silica Ceramic Cores for the Hollow Blades Prepared by the Conversion of the Silicon ResinPreparation, Characterization and Visible-Light Catalytic Activity of Core-Shell Structure NiFe2O4@TiO2 Ferrite NanoparticlesFabrication of Morphology Controllable Vertically Aligned TiO2 Nanorod Arrays for Dye-Sensitized Solar CellsAnalysis of Influence of High Temperature Homogenizing on UV Transmittance of Quartz GlassEffect of Amphoteric Zn2+ on the Determination of B2O3 Content in GlassEffects of Iron Oxide on the Crystallization of Calcium Alumino-Silicate GlassPreparation Process of Glass Membrane Using Non-Solvent Induced Phase SeparationEffects of B2O3 Contents on Crystallization Behaviors and Dielectric Properties of CaO-B2O3-SiO2 Glass CeramicsPreparation and Performance of Inorganic Thermal Insulation Glazed Hollow Bead MaterialResearch Progresses of Vacuum Glazing and BIPVA Study of Environmental Impact Assessment on Intrinsic Energy and Full Life Cycle of Typical Energy-Saving Exterior WindowsDurability of Photovoltaic Laminated Glass Modules Affected by Temperature-Humidity CyclesPreparation of Waterproof Silica Gel Coatings on Porous Silica Ceramic SubstratesEffect of ZrO2 Additive on the Properties of MgO-Cr2O3 Refractory Used for RH DegasserA Facile and Reliable Preparing Route of Brown Fused Alumina from Aluminum DrossReaction Mechanism of Iron-Rich Magnesia-Corundum Composites at 1420?CResearch on High Temperature Creep Properties of Al2O3-SiO2 Ore (Al2O3 ~ 65)Investigation on High-Temperature Creep Properties of High-Alumina BauxiteCompressive Creep Behavior of Low Porosity Fireclay Bricks (LPFBs) for Glass Furnace RegeneratorPreparation and Long-Term Stability Study of Steel Fiber/Graphite Conductive ConcreteDevice for Pore Solution Extraction from Cement-Based Materials and its ApplicationMethods for Inhibition of Fluidity Loss of Concrete Mixed with SuperplasticizersUltrasonic Prediction of 28-Day Compressive Strength of Crumb Rubber Concrete during early AgeThe Study of Trial-Mix Strength Calculation Equation of C60 Concrete under Certain Steam Curing ScheduleERT Imaging of Graphite Electrically Conductive ConcreteAcid Attack Resistance of Magnesium Phosphate CementThe Effect of Sample Storage and Inspection Equipment on the Rheological Property of Oil Well CementChloride Ion Erosion in Concrete under Sustained Axial PressureInfluence of Environmental Humidity and Test Depth on the Measured Gas Permeability of ConcreteEffect of Low Content of Metakaolin Addition on the Properties and Pore Structure of ConcreteHydration Products, Microstructure and Durability of Concrete with Metakaolin AdditionEffect of Fly Ash Composition and Structure on the Formation of Cement ClinkerEffect of F-S Mineralizer on the Calcination of Recycled Cement Clinker Produced from Waste ConcreteHydration Properties and Sulfate Attack of Composite Cement Mixed with High Titanium SlagEffect of Heat-Treatment on Microstructure and Mechanical Properties of Magnesium Phosphate CementResearch Progress of Crumb Rubber MortarInfluence of Calcium Sulfate Varieties on Properties of Calcium Aluminate Cement-Based Self-Leveling MortarsCharacterization and Cementitious Properties of BOF SlagComparison of Hydration Mechanism between Cements from Two Different Residual MudsGreenhouse Effect Reduction through Sustainable Magnesium Oxide Eco-Cement ProductsQualitative and Quantitive Analysis of the Active Component in Silane Building Protective AgentsStudy on the Threshold Value and Test Methods for Chloride Ion Content in Sea SandSimulation and Survey of Stratum Disturbance for Shield Tunneling in Water-Rich Soil LayersCharacterization and Vertical Elements Distribution of ZnGeP2 Single CrystalsCrN Coatings at Different Substrate Temperatures Prepared by Single D.C. Magnetron Sputtering TargetInfluence of Nitrogen Content on Properties of CrN Coatings Deposited by Single Target Magnetron SputteringEpitaxial Growth of Copper Film by MOCVDStudies of Pd-Ag Thin Film for Hydrogen SensorPreparation and Photoluminescence Properties of RE-Doped GaN Film by Sol-Gel MethodA Novel Electrolyte Protect Layer for Aqueous Lithium-Air BatteryEffects of Diluent on Mechanical Properties of Hollow Glass Microsphere Reinforced Epoxy Resin CompositePreparation, Structure and Thermolysis Characteristics of Ammonia BoranePreparation of Ultra-Fine Clarithromycin Particles by Anti-Solvent RecrystallizationSonophotocatalytic Degradation and Mineralization of Bisphenol A in a Sequential Ultrasound Intensified Photocatalytic ReactorPMAA-g-CS/Loess Composite for Removing Lead IonsThermal Reaction and Phase Evolution of APP/Al(OH)3/a-SiO2Water-Based Route to Synthesis of High-Quality UV-Blue Photoluminescing ZnSe/ZnS Core/Shell Quantum Dots and their Physicochemical CharacterizationSpectra Analysis of some Europium(III)/Terbium(III) ComplexesDurability of Fracture-Filled Emeralds with a New Artificial Filler ExCelSimulating Discrimination for Quality Evaluation of Rubelite RedCharacteristics of Metallurgical Waste Slag and its Heating Behavior in a Microwave Field
