Buch, Englisch, 740 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1390 g
ISBN: 978-3-03835-407-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committees
Chapter 1: Mechanical Engineering, Processing and Surface Engineering, Metals Treatment, Equipment and Tools
On the Need to Increase Pressure and Flow Rate SCTE in the Grinding Zone
Analysis of Force Dependences of Diamond Burnishing with Different Types of Burnishing Tools
Modal Analysis as a Means of Researching the Vibrations in Grinding
Research on Fracture Mechanics and Dispersed Structure of the Polymeric Composite Materials under Abrasive Processing
Electric Drill Drive with Intermediate Rolling Members Reducer
Force Analysis of Double Pitch Point Cycloid Drive with Intermediate Rolling Elements and Free Retainer
Research Methods of Milling Technology Elements
Geometric Model of the Interaction of the Grinding Wheel and Workpiece during Surface Grinding with the Periphery of a Straight Wheel
Prospects for Further Rock Cutting Mechanisms Development
Technical Diagnosis of Internal Combustion Engines in the Parameters of Vibration
The Effect of Electrolytic Hydrogenation on the Plastic Flow of Aluminum Alloy
Study of Methods Relating to Increase of Contact Pitting Resistance in 45, 40H, 35HGSA Steel due to Development of Heterogeneous Structure Involving Mechanical Hardening Technique
Development of Bases and Evaluation Capabilities of the New Tribotechnology for Plain Bearings
Development of Parameters Describing Heterogeneous Hardened Structure
Investigating the Regularities of Surface Roughness Structuring while Processing with Surface Plastic Deformation for Calculation
Determination of the Energy Parameters of the Shock Mechanism Used to Harden the Surface by Plastic Deformation
Dependence of Silicon and Manganese Content in the Weld Metal on the Welding Current and Method of Gas Shielding
Influence of Power Supply Energy Characteristics upon the Stability of MMA Process
Calculation of the Heat Content of the Electrode Metal Droplet When Applying Power Supplies for Manual Arc Welding with Different Volt-Ampere Characteristic
Diffusion and Mechanical Stresses in a Material with Two-Component Coating at External Heating
Towards Energy Intensity Reduction of Machining Fabrication Procedures
Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills
Study of the Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD
Influence of Chip Formation Characteristics on Flank Contact Load Distribution in Titanium Alloy Cutting
Increasing Efficiency by Applying the Arc Covered-Electrode Welding for Repairing Magnetized Pipelines
Specifics of Welded Joint Destruction Obtained by Friction Stir Welding at Strain
Reduction of Metal Consumption in View of Mining Cutting Tools Operation
Assessing the Metal Consumption for Manufacturing a Conical Part by Hollow Billet Crimp-Expansion and Sheet Blanks Drawing Crimping
Chapter 2: Material Engineering and Technologies
Thermally Conductive Polymeric Materials and their Usage in LED-Devices
Influence of Crystal Defects on the Reflectivity of the Aluminum
Copper Removal from Industrial Wastewaters by Natural Clinoptilolite and Mordenite
Inquiring into Structure of Hyperbranched Polyethylene Produced in Radical Polymerization Process
Assumed Mechanism of Polymeric Deposit Formation in Recycle Propylene Washing Column during Bulk Polymerization
Modeling of Mechanical Behavior of Ceramic Nanocomposites
Multiscale Simulation of Porous Quasi-Brittle Ceramics Fracture
Mechanical Behavior of Light Alloys with Bimodal Grain Size Distribution
Influence of Layer-by-Layer Laser Sintering Modes on the Roughness and Thickness of Sintered Layer of Copper Powder
Comparison of Activation Technologies Powder ECP-1 for the Synthesis of Products Using SLS
An Application of Spark Plasma Sintering for Compaction of Refractory Oxides and Nitrides
A Cylindrical Shell Made of Glass-Metal Composite
Formation of Gradient Multiphase Nanostructured Surface Layers Using the Electron-Ion-Plasma Combined Method
Phase Formation in the Ti-Y-O System Formed Using High-Energy Methods
Formation of Ceramic Crock Structure Made of Technogenic Raw Materials with Vanadium Component
Development of Composition and Research of Rheological Properties of Thermoplastic Slips on the Basis of Aluminium Nitride
Hardening of Metallurgical Machinery Components by Facing with Heatproof, Hard Steels and Low Temperature Pre-Heating
Volume Self–Sustained Discharge in Atmospheric Pressure Gas with High Pulse Repetition Frequency
Production Tribological Behavior Feature of Metallic Nanoparticle Additives
Structure and Properties of Multicomponent Tin Leaded Bronzes upon Die-Casting Depending on Pouring Temperature
Physical-Mechanical Properties of Corundum-Zirconium Ceramic Obtained by the Technology of Radial Magnetoimpulse Pressing
Influence of Phase Composition on Properties of Corundum-Zirconium Ceramic
Oxide Powder Plasma Processing by Low-Energy Ions of Titanium
Structure and Properties of Multicomponent Bronze Depending on the Crystallization Conditions
Mechanical Properties of Spun Castings of Multicomponent Bronze Depending on the Casting Conditions
Low-Melting Glass-Ceramic Composites with Low Linear Thermal Expansion Coefficient for Radio-Electronics
Phase Composition and Mechanical Properties Modification in Cr/Ti System by Short-Pulsed High Intensity Ion Beams Treatment
Investigation of Ultradispersed Powders FexOy Obtained in the Electric Discharge Plasma
Chapter 3: Modelling and Numerical Simulation, Algorithms and Mathematical Methods for Applied Problems
Experimental Studies of Counter Vortex Flows Modeling
Gas Injection into Porous Reservoir Partly Saturated by Water
Experimental Study of Forest Fuel Ignition by the Source of Limited Energy Capacity
Finite Element Modeling of Delamination Propagation in Composite Laminates
Numerical Analysis of Inverse Problems for the Model of Transfer of Industrial Environmental Pollution in the Machine-Building
Simulation of a Flexible Mirror Performance in the Problem of Adaptive Compensation for Aberrations in an Optical System
Calculation of Heat Exchange Characteristics Transpiration Cooling Systems
Calculation of Effective Coefficient of Thermal Expansion for Composite ‘Glass-Eucryptite’ Changing during Sintering
Dynamic Susceptibility of a System
An Improvement of the Concept Design Analysis Method by the Use of the Avoidance Function
Dependence of the Effective Diffusion Coefficient of a Matrix Composite on the Size of Inhomogeneities
Influence of the Shaper Design of Pneumohydraulic Impact Device on the Form and Duration of the Impact Impulse
Influence of Method Used for Calculating of Effective Properties on Stressed-Strain State of Composite Plate under Nonstationary Heating
Numerical Simulation of Multilayer Composites Failure under Dynamic Loading
Study of the Effect of the Rolling Mill Inter-Stand Tension on the Strip Gauge Deviation
Thermo-Physical Model of the Lamellate System Grinding
Tessellation Methods for Modeling the Material Structure
Optimization Method in 2-D Problems of Material Body Cloaking
Mathematical Modelling of an Arch Tooth Surface as an Envelope
Model of Automatic Distribution of Topologically Related Objects to Layers in Navigation Systems
Theoretical and Experimental Study of Led Luminaire
The Evolution Equations of Shock Deformation Problems with Plane Surfaces of Discontinuities in Elastic Inhomogeneous Mediums
Numerical Study of Shock Wave Interaction with Protective Stopping with Regard to the Type of its Setting
Asymptotic Model of Free Convection Flow on a Vertical Surface in Porous Media with Newtonian Heating
Two-Wave Processes in the Magnetic Vibrations of a String
Attenuation of Acoustic Waves in Metal Barriers
Comparison of Cable Insulation Control in Weak and Strong Electric Fields
Numerical Investigation of Compression Wave Attenuation in Water Barriers
The Synthesis, Designing and Analysis of the Spatial Mechanisms with Imposed Constraints
Organization of Continuous Process Simulation via E-Network
Numerical Simulation of Neural Network Components of Controlling and Measuring Systems
Numerical Simulation of High-Speed Orthogonal Cutting of Metals
Buckling Analysis of Stiffened Plates by Ritz Method
Boundary Element Approach in Impedance Cloaking Problem
The Influence of Grain Form on Effective Diffusion Coefficient of Polycrystalline
Mathematical Modeling of Pulsed Electric-Sintering Powders
Stressed-Strain State of Multi Layer Foil under One-Axis Tension
Determination of Effect of Salt Content in Cooling Liquid on the Result of Cable Capacitance per Unit Length Measurement
A Simple Method for Solving Dynamic Problems of Robotics
The Method of the Centerless Roundness Measuring with Corrective Adjustment
Chapter 4: Control and Automation Systems, Manufacturing Applications
Mobile Water Treatment Complex
Method of Control of Object Positioning System and Device Scheme
Frequency Domain Sensors and Frequency Measurement Techniques
Predictive Inverse Neurocontrol with Recycled Reference Trajectory
Improvement of Algorithms for Automatic Gauge Control System of the Hot-Rolling Mill
Synthesis of Three-Dimensional Models from Drawings Based on Spectral Graph Theory
Production Processes Management by Simulation in Tecnomatix Plant Simulation
On Creation of Energy-Saving Hydraulic Impact Devices
Measurement of the Current Transfer Function for Power Transducers of Current to Voltage
Utilization Prospects of Coalbed Methane in Kuzbass
Multidimensional Fuzzy Control System Development of Oil Transportation and Treatment Technological Processes Based on the Input/Output Parameters Model in the Precise Terms Set Form
Intellectual Control of Oil and Gas Transportation System by Multidimensional Fuzzy Controllers with Precise Terms
Adaptive Structural Reconfigurable Algorithms of Control
Development of a Combined Algorithm for Request Distribution Using Multi-Objective Optimization Methods
Developing a Procedure for Technical Status Control of a Turbine Compressor Package Blades
Determination of Cutting Forces in Oblique Cutting
Chapter 5: Image and Signal Processing, Recognition, Information Processing and Applied Technologies
Object’s Border and Position Allocating in an X-Ray Image
Benchmark for FFT Libraries
Imaging Based on Signal from Side-Scan Sonar
Adaptive Neuro-Fuzzy Recognition Technology Intersecting Objects
Development of a Neuronetwork Component for Technical Systems of Mechanical Engineering
Application of Convolutional Neural Networks for Automatic Number Plate Recognition on Complex Background Images
Use of Local Characteristics of Self-Similarity of Digital Images for Solving the Problems of Crack Detection
Expert Evaluation of the Quality of the Development of New Technics' Samples: Experience in the Development of a New Kind of Multipurpose Shield-Type Heading Machine
Mobile Devices for Plants Models Obtaining with the Possibility of Data Transition (by Ethernet)
