Sonstiges, Englisch, Band Volume 756, 740 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 756, 740 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03859-110-8
Verlag: Trans Tech Publications
The 121 papers are grouped as follows:
Chapter 1: Mechanical Engineering, Processing and Surface Engineereng, Metals Treatment, Equipment and Tools;
Chapter 2: Material Engineering and Technologies;
Chapter 3: Modelling and Numerical Simulation, Algorithms and Mathematical Methods for Applied Problems;
Chapter 4: Control and Automation Systems, Manufacturing Applications;
Chapter 5: Image and Signal Processing, Recognition, Information Processing and Applied Technologies
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
On the Need to Increase Pressure and Flow Rate SCTE in the Grinding ZoneAnalysis of Force Dependences of Diamond Burnishing with Different Types of Burnishing ToolsModal Analysis as a Means of Researching the Vibrations in GrindingResearch on Fracture Mechanics and Dispersed Structure of the Polymeric Composite Materials under Abrasive ProcessingElectric Drill Drive with Intermediate Rolling Members ReducerForce Analysis of Double Pitch Point Cycloid Drive with Intermediate Rolling Elements and Free RetainerResearch Methods of Milling Technology ElementsGeometric Model of the Interaction of the Grinding Wheel and Workpiece during Surface Grinding with the Periphery of a Straight WheelProspects for Further Rock Cutting Mechanisms DevelopmentTechnical Diagnosis of Internal Combustion Engines in the Parameters of VibrationThe Effect of Electrolytic Hydrogenation on the Plastic Flow of Aluminum AlloyStudy of Methods Relating to Increase of Contact Pitting Resistance in 45, 40H, 35HGSA Steel due to Development of Heterogeneous Structure Involving Mechanical Hardening TechniqueDevelopment of Bases and Evaluation Capabilities of the New Tribotechnology for Plain BearingsDevelopment of Parameters Describing Heterogeneous Hardened StructureInvestigating the Regularities of Surface Roughness Structuring while Processing with Surface Plastic Deformation for CalculationDetermination of the Energy Parameters of the Shock Mechanism Used to Harden the Surface by Plastic DeformationDependence of Silicon and Manganese Content in the Weld Metal on the Welding Current and Method of Gas ShieldingInfluence of Power Supply Energy Characteristics upon the Stability of MMA ProcessCalculation of the Heat Content of the Electrode Metal Droplet When Applying Power Supplies for Manual Arc Welding with Different Volt-Ampere CharacteristicDiffusion and Mechanical Stresses in a Material with Two-Component Coating at External HeatingTowards Energy Intensity Reduction of Machining Fabrication ProceduresMachinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun DrillsStudy of the Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VDInfluence of Chip Formation Characteristics on Flank Contact Load Distribution in Titanium Alloy CuttingIncreasing Efficiency by Applying the Arc Covered-Electrode Welding for Repairing Magnetized PipelinesSpecifics of Welded Joint Destruction Obtained by Friction Stir Welding at StrainReduction of Metal Consumption in View of Mining Cutting Tools OperationAssessing the Metal Consumption for Manufacturing a Conical Part by Hollow Billet Crimp-Expansion and Sheet Blanks Drawing CrimpingThermally Conductive Polymeric Materials and their Usage in LED-DevicesInfluence of Crystal Defects on the Reflectivity of the AluminumCopper Removal from Industrial Wastewaters by Natural Clinoptilolite and MordeniteInquiring into Structure of Hyperbranched Polyethylene Produced in Radical Polymerization ProcessAssumed Mechanism of Polymeric Deposit Formation in Recycle Propylene Washing Column during Bulk PolymerizationModeling of Mechanical Behavior of Ceramic NanocompositesMultiscale Simulation of Porous Quasi-Brittle Ceramics FractureMechanical Behavior of Light Alloys with Bimodal Grain Size DistributionInfluence of Layer-by-Layer Laser Sintering Modes on the Roughness and Thickness of Sintered Layer of Copper PowderComparison of Activation Technologies Powder ECP-1 for the Synthesis of Products Using SLSAn Application of Spark Plasma Sintering for Compaction of Refractory Oxides and NitridesA Cylindrical Shell Made of Glass-Metal CompositeFormation of Gradient Multiphase Nanostructured Surface Layers Using the Electron-Ion-Plasma Combined MethodPhase Formation in the Ti-Y-O System Formed Using High-Energy MethodsFormation of Ceramic Crock Structure Made of Technogenic Raw Materials with Vanadium ComponentDevelopment of Composition and Research of Rheological Properties of Thermoplastic Slips on the Basis of Aluminium NitrideHardening of Metallurgical Machinery Components by Facing with Heatproof, Hard Steels and Low Temperature Pre-HeatingVolume Self?Sustained Discharge in Atmospheric Pressure Gas with High Pulse Repetition FrequencyProduction Tribological Behavior Feature of Metallic Nanoparticle AdditivesStructure and Properties of Multicomponent Tin Leaded Bronzes upon Die-Casting Depending on Pouring TemperaturePhysical-Mechanical Properties of Corundum-Zirconium Ceramic Obtained by the Technology of Radial Magnetoimpulse PressingInfluence of Phase Composition on Properties of Corundum-Zirconium CeramicOxide Powder Plasma Processing by Low-Energy Ions of TitaniumStructure and Properties of Multicomponent Bronze Depending on the Crystallization ConditionsMechanical Properties of Spun Castings of Multicomponent Bronze Depending on the Casting ConditionsLow-Melting Glass-Ceramic Composites with Low Linear Thermal Expansion Coefficient for Radio-ElectronicsPhase Composition and Mechanical Properties Modification in Cr/Ti System by Short-Pulsed High Intensity Ion Beams TreatmentInvestigation of Ultradispersed Powders FexOy Obtained in the Electric Discharge PlasmaExperimental Studies of Counter Vortex Flows ModelingGas Injection into Porous Reservoir Partly Saturated by WaterExperimental Study of Forest Fuel Ignition by the Source of Limited Energy CapacityFinite Element Modeling of Delamination Propagation in Composite LaminatesNumerical Analysis of Inverse Problems for the Model of Transfer of Industrial Environmental Pollution in the Machine-BuildingSimulation of a Flexible Mirror Performance in the Problem of Adaptive Compensation for Aberrations in an Optical SystemCalculation of Heat Exchange Characteristics Transpiration Cooling SystemsCalculation of Effective Coefficient of Thermal Expansion for Composite ?Glass-Eucryptite? Changing during SinteringDynamic Susceptibility of a SystemAn Improvement of the Concept Design Analysis Method by the Use of the Avoidance FunctionDependence of the Effective Diffusion Coefficient of a Matrix Composite on the Size of InhomogeneitiesInfluence of the Shaper Design of Pneumohydraulic Impact Device on the Form and Duration of the Impact ImpulseInfluence of Method Used for Calculating of Effective Properties on Stressed-Strain State of Composite Plate under Nonstationary Heating Numerical Simulation of Multilayer Composites Failure under Dynamic LoadingStudy of the Effect of the Rolling Mill Inter-Stand Tension on the Strip Gauge DeviationThermo-Physical Model of the Lamellate System GrindingTessellation Methods for Modeling the Material StructureOptimization Method in 2-D Problems of Material Body CloakingMathematical Modelling of an Arch Tooth Surface as an EnvelopeModel of Automatic Distribution of Topologically Related Objects to Layers in Navigation SystemsTheoretical and Experimental Study of Led LuminaireThe Evolution Equations of Shock Deformation Problems with Plane Surfaces of Discontinuities in Elastic Inhomogeneous MediumsNumerical Study of Shock Wave Interaction with Protective Stopping with Regard to the Type of its SettingAsymptotic Model of Free Convection Flow on a Vertical Surface in Porous Media with Newtonian HeatingTwo-Wave Processes in the Magnetic Vibrations of a StringAttenuation of Acoustic Waves in Metal BarriersComparison of Cable Insulation Control in Weak and Strong Electric FieldsNumerical Investigation of Compression Wave Attenuation in Water BarriersThe Synthesis, Designing and Analysis of the Spatial Mechanisms with Imposed ConstraintsOrganization of Continuous Process Simulation via E-NetworkNumerical Simulation of Neural Network Components of Controlling and Measuring SystemsNumerical Simulation of High-Speed Orthogonal Cutting of MetalsBuckling Analysis of Stiffened Plates by Ritz MethodBoundary Element Approach in Impedance Cloaking ProblemThe Influence of Grain Form on Effective Diffusion Coefficient of PolycrystallineMathematical Modeling of Pulsed Electric-Sintering PowdersStressed-Strain State of Multi Layer Foil under One-Axis TensionDetermination of Effect of Salt Content in Cooling Liquid on the Result of Cable Capacitance per Unit Length MeasurementA Simple Method for Solving Dynamic Problems of RoboticsThe Method of the Centerless Roundness Measuring with Corrective AdjustmentMobile Water Treatment ComplexMethod of Control of Object Positioning System and Device SchemeFrequency Domain Sensors and Frequency Measurement TechniquesPredictive Inverse Neurocontrol with Recycled Reference TrajectoryImprovement of Algorithms for Automatic Gauge Control System of the Hot-Rolling MillSynthesis of Three-Dimensional Models from Drawings Based on Spectral Graph TheoryProduction Processes Management by Simulation in Tecnomatix Plant SimulationOn Creation of Energy-Saving Hydraulic Impact DevicesMeasurement of the Current Transfer Function for Power Transducers of Current to VoltageUtilization Prospects of Coalbed Methane in KuzbassMultidimensional Fuzzy Control System Development of Oil Transportation and Treatment Technological Processes Based on the Input/Output Parameters Model in the Precise Terms Set FormIntellectual Control of Oil and Gas Transportation System by Multidimensional Fuzzy Controllers with Precise TermsAdaptive Structural Reconfigurable Algorithms of ControlDevelopment of a Combined Algorithm for Request Distribution Using Multi-Objective Optimization MethodsDeveloping a Procedure for Technical Status Control of a Turbine Compressor Package BladesDetermination of Cutting Forces in Oblique CuttingObject?s Border and Position Allocating in an X-Ray ImageBenchmark for FFT LibrariesImaging Based on Signal from Side-Scan SonarAdaptive Neuro-Fuzzy Recognition Technology Intersecting ObjectsDevelopment of a Neuronetwork Component for Technical Systems of Mechanical EngineeringApplication of Convolutional Neural Networks for Automatic Number Plate Recognition on Complex Background ImagesUse of Local Characteristics of Self-Similarity of Digital Images for Solving the Problems of Crack DetectionExpert Evaluation of the Quality of the Development of New Technics' Samples: Experience in the Development of a New Kind of Multipurpose Shield-Type Heading MachineMobile Devices for Plants Models Obtaining with the Possibility of Data Transition (by Ethernet)
