Buch, Englisch, 1904 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3500 g
ISBN: 978-0-87849-202-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Sponsors, Committees, Preface
Wood-Polymer Composite Prepared by In Situ Synthesis of Copolymer within Wood and its Dimensional Stability
Flexural Behaviors of RC Beams Strengthened with Post-Poured UHTCC Layer
The Study of Several UV Curable Polyurethane Acrylates
The Relationship between Residual Stress and Resistivity of Au/NiCr/Ta Multi-Layered Metallic Films by Magnetron Sputtering
Combinations of Various Self-Consolidating Concrete Test Methods and Workability Responses
Effect of Substituents and Solvents on Phenol-Isocyanate Urethane Reaction
Parameter Determination of Discrete Element Model of Conditioned Soil by Genetic Neural Network
Improving the Performance of Intumescent Flame Retarded Polypropylene with Nano-ZrO2
The Study of Sputtered Silver-Based Low-Emissivity Coating on Glass
First-Principles Calculation of Elastic Properties of TiB2 and ZrB2
Preparation and Performance Research of Thermosetting Heat-Reflective Coating for Asphalt Pavement
Erosion-Resistant PVD ZrAlCuN Coating for Titanium Alloy
Mechanical and Shielding Properties of an As-Cast New Pb-B Shielding Composite Materials
Physical and Electrochemical Properties of Layered Li[Ni1/3Co1/3Mn1/3]O2 Cathode Materials
Effects of RE on the Microstructure and Mechanical Properties of Electrodeposited Copper Foil
Structure, Electrical and Optical Properties of Ni-Doped Cu3N Films Deposited by Radio Frequency Magnetron Sputtering
Crack Pattern Evolution and Complexity of Brittle Failure of Rock
Gd2O3 Added Glass-Ceramic Composite for the Improvement of Energy Storage Density through Controlled Crystallization
Study on the Reaction Mechanism of (a-Al2O3+TiB2+TiC)/Al Composites Fabricated by Al-TiO2-B4C System
Similarity of Deuterium Absorption at Room Temperature for Different Ti-Zr-Ni Quasicrystals
Self-Assembled Stratified Structure in Polyalkylthiophene-6 and Polyvinylcarbazole Blend Film
Mathematical Model for Temperature Distributions of Work Roll in Aluminum Strip Cold Rolling
Research on the Tribological Properties of SF Polymer Water-Lubricated Bearings
Morphological Properties of Poly(Trimethylene Terephthalate)/Maleated Styrene-Butylene-Co-Ethylene-Styrene/Organoclay Ternary Nanocomposite
Effect of Film Thickness on Structure and Property of Pb(Zr0.53Ti0.47)O3 Thin Film
Transformation Induced Plasticity Behaviors of TRIP Steels with Different Heat Treatment Processes
Study on Factors Impact on Performance of Ceramisite Made of Shale and Sludge
Study on Choice of Reference Planes for 3D Machined Surface Roughness of SiCp/Al Composites during High Speed Milling Process
Analysis on the Microstructure Characteristics of Steel-Slag Based Ceramics
Preparation and Characterization of Poly(Lactic Acid)/Ethylene Glycidyl Methacrylate Copolymer Blends
Thermo-Physical Properties of Copper Matrix Composites Reinforced with 3D-SiC Network
Chiral Resolution of Racemic (±)-1,1'Bi (2-Naphthol) by Use of Molecularly Imprinted Polymers
Structural Transformation of Aluminum Nanowires during Solidification
Dynamic Properties of Lead Rubber Bearings and its Seismic Isolation Applications in High-Speed Railway Bridge
Study on Inorganic Phase Change Materials Encapsulated by Rice Straws
First-Principles Calculations of Transition Metal Nitrides TiN and NbN
Research on Blue-Algae Removal from Eutrophication Water by Modified Clay
Wear Mechanism Analysis and Microstructure of Vanadium Carbide Coating by Thermal Diffusion Process
Dynamic Behavior and Stability of Prestressed Arch-Supported Reticulate Shell Structure
Research on the Shielding Performance of Electromagnetic Shielding Clothes
Axial Compression Experimental Research of RPC Filled Steel Tube Columns
Trisiloxane Surfactants Technology Optimization and Impact of Surface Tension
Preliminary Study on Natural Villous Bamboo Fiber Medium Density Fiberboard (MDF)
Structure and Mechanical Properties of (Cu, Ti) - Binary Metal Doped Diamond-Like Carbon Films
Study on the Morphology and Properties of Nylon11/Montmorillonite Nanocomposites
Ductility Evaluation of Reinforced UHTCC Structural Members
Compressive Buckling of Composite Plates with a Delamination
Steady Thermal Stresses in a Ceramic/FGM/Metal Composite EFBC Plate under Convective Heat Transfer Boundary
Experiment Study on the Frost Resistance of Steel Fiber Reinforced Concrete
Aging Effects on Pavement Performance of Asphalt Mortar
Study and Preparation of Ti-Doped ZnO Thin Films by Using Chemical Bath Deposition
Room-Temperature Electrical Conductivity Property of Si3N4/TiN Composite Ceramics
A New Regeneration and Restoration Technology of Asphalt Pavement
Enhancing the Built Environment by Green Roofs
Effect of Electric Pulse Modification on Alloy Layer of Hot Galvanizing Coatings
Nonlinear Seismic Response Analysis Method for Steel Mega-Frame Structures Based on Improved Finite Segment Element Plastic Zone Model
Frictional Brake Material Reinforced with Sisal Fiber and Glass Fiber Hybrid
Prediction on Autogenous Shrinkage of Self-Consolidating Concrete
Low Temperature Fired Ferrite/Ceramic Composite Materials and their Permeability Spectra
Mechanical Performance of Straw Fiber Reinforced Desulfurization Gypsum Composite Materials
Preliminary Research on Pb-Sn-Al Laminated Composite Electrode Materials Applied to Zinc Electrodeposition
Grafting Milk Protein on Polyester Fabric Encased with Hydroxide and Wearability of Polyester Fabric Grafted Milk Protein
Study of Surface Modification of Recycled Aggregate and Interfacial Zone Microstructure of the Concrete
The Pervaporation Performance of Polyimide-Block-Polyethylene Glycol Membranes for Gasoline Desulphurization: Effect of PEG Groups
Preparation and Application of Hybrid SBS Bipolar Membrane in Electro-Generation of HPAc and Succinic Acid
Damage Theoretical Analysis of 2.5D C/SiC Composites under Tensile and Shear Loading
Fouling Resistance of PVDF-Fabric Composite Membrane in Membrane Distillation Desalination
Synthesis and Photovoltaic Properties of Fluorene-Based Copolymers
Response of Concrete Beams Partially Prestressed with External Unbonded Carbon Fiber-Reinforced Polymer Tendons
Study on Low Temperature Sintering Behaviour of CaO-B2O3-SiO2 Glass Ceramics
Preparation and Basic Mechanical Properties of Self-Compacting Concrete
Sandwiched Wood-Plastic Composites with Flame-Retardant Skin
Migration of Cations in Mortar under an Electrical Field Controlled by a Constant Current Density
Vibration Research of Gear Box in H5 Mill for Alloy Bar's Rolling Process
Study on Application of Modified Polyethylene in Preparation of Wood-Plastic Composites
Synthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-Barium Ferrites Nanocomposites
Hydrothermal Synthesis and Adsorption Proprieties of Titania-Active Carbon Composites
Crack Prevention-Based Selection Method for Thickness of L-Shaped Floorslab without Beam
Sulfonation Surface Treatment of Plasma Alkali Secondary Lithium Battery Separator
Effect of Compatibilizing Agent on Mechanical and Thermal Properties of Wood-Plastic Composites
Research on Swirling Cavitation Degradation and its Application in Wastewater Treatment
The Moment-Curvature Relation of SRC Column Based on the Fiber Model Method and its Influencial Factors Analysis
Hydration Behavior of Metakaolin-Cement Pastes with Different Contents of Reactive Aluminous at Early Age
Treatment Materials for Spalling on Loess Slope
Thermal Stability and Dynamic Mechanical Behavior of Nano-SiO2/Phenol Formaldehyde Resin Nanocomposites
Research on Pavement Characteristics of Epoxy Resin and Rubber Modified Asphalt
Load Carrying Capacity Analysis of Multi-Spiral Reinforced Concrete Column
Tool Materials Design and the Sintering Optimization Based on Interface Strengthening Theory
Fabrication of ACF/CNT Composites by CVD Method
Control Growth of Pyrocarbon by Chemical Vapor Infiltration
An Experimental Study on Effect Factors of Post-Installed Bar in Concrete Anchorage and Bonding Performance
Thermal Conductive Composite Prepared by Carbon Coated Aluminum Nanoparticles Filled Silicone Rubber
Study on Performance of Epoxy Asphalt Concrete Applied in the Deck Pavement of Pingsheng Steel Bridge
Thermal Properties and Flame Retardancy of Wood Treated with a Series of Stannates
Effect of Technical Parameters on Preparing for Vanadium Nitride
The Engineering Properties Comparative Study of Wetlands Soft Soil and Soft Soil of other Genesis
The Growth, Surface Topography and Curie Temperature in Ni Thin Films: Kinetic Lattice Monte Carlo Simulation
Preparation and Performance Test of Composite Clinoptilolite Filter Material
Multi-Objective Optimization of a Wedged-Ring Joint Structure
The Mechanism of Antibacterial Activity of Copper and Cerium-Loaded White Carbon Black
Seismic Behavior Analysis on the Steel Cold-Formed in Modular House
Experimental Study on Damage Diagnosis of Reinforced Concrete Beam with Acoustic Emission
Synthesis and Characterization of Modified Zn-Antibacterial White Carbon Black
Cement-Based Composite with Carbon Nanotubes Reinforcement Tailored for Structural Damping
Effect of Annealing Temperatures on the Microstructure of CuInS2 Thin Film by One-Step Electrodeposition
Development of a Low Yield-Strength Ratio and Fire Resistant Steel for High-Rise Building
Tensile Properties of Aluminum Matrix Composites Reinforced with Submicron SiC Particles
Study on Resistance to Chloride Ion Penetration of High Performance Concrete for High Speed Railway Bridge Pile
Smart Green Composite: Effect of Cuttlebone Particle on the Mechanical Properties of NR Vulcanizates
Study on Bonding Properties of Birch with API Adhesive
A Research on Performance of Polystyrene-Aerated Concrete Wall Materials
Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content
Hydrophilic Modification of PES Hollow Fiber Membrane via Surface-Initiated Atom Transfer Radical Polymerization
The Seismic Behavior of Strengthened Joints between Concrete-Filled Steel Tubes and Beams Based on the Numerical Simulation Technology
Study on Vibration Alleviating Properties of Different Fiber Reinforced Polymer Concrete
Fabrication and Performance of Al-NaI Radioactive Transmutation Targets
Effect of Material Properties on Plastic Shrinkage of Ultra-Fine Sand Pumping Concrete
Evaluation on Performance of Functional Polymer
Enchancement of Mechanical Properties in BaTiO3 Ferroelectric Thin Films
Study on Frost-Resistant Experiments of Concrete for High Speed Railway Pile Foundation Protection
The Research on Influencing Factors of Polymer Flooding
Interaction and Enthalpy Recovery Behavior in Polymer Blends of Polysulfone and Carboxylated Polysulfone
Preparation and Performance Study of Reflection Heat Preservation Insulation Coating
Effect of Rosin Ester on Water-Resistant Adhesion Oximized RTV-1 Silicone Rubber Sealant
Status and Development Trend of Energy-Saving Wall Materials in Cold Areas
Effect of Density on Physical and Mechanical Properties of Reconstituted Small-Sized Bamboo Fibrous Sheet Composite
Organic EL Devices Based on Pyridine-Containing Compounds
A Novel Green Tape with High Solid Content Prepared by Aqueous Tape-Casting
Study on the Properties of Epoxy Thermosets Cured by ImHBPs under Lower Temperature
Effect of Thermal Conduction on Tribological Properties of Polytetrafluoroethylene Based Composites
A Study on 3D Isolation Effect on High-Rise Building Subjected to Near-Field Ground Motions
Study on CH4 Conversion over Ce-Zr Solid Solution Supported Nano Pt-Ni Bimetal Catalysts: Preparation and Characterization of Ce-Zr Solid Solution
The Method of Producing Nanomaterials and Melt Blown Nonwovens Composites
Effect of Deformation and Annealing on Microstructure and Properties of Composite Cu-10Fe-3Ag Wire
Erosion Mechanisms of Hydraulic Concretes under High-Speed Abrasive Water Jets at Different Impact Angles
Preparation of Cobalt and Copper Superfine Composite Oxides and Magnetic Property
Effect of Microstructure on Transport Properties of Nano-Polycrystalline La0.7Sr0.3MnO3-D Films
Lower Branched Liquid Crystalline Polyester POSS Used as Collaborative Modifier for Epoxy Resin
Preparation and Properties of Poly Methyl Methacrylate/Lanthanum Hexaboride Nanocomposites
Photoluminescence of Eu3+-Doped TiO2 Thin Films Prepared by Sol-Gel Method
Novel Cementious Materials from Industrial Solid Waste for Silt Soil Solidification
Research on Earthquake Resistant Materials in Mountain Tunnels Crossing Fault
Application Study of Nanoparticle-Enhanced Phase Change Material in Ceiling Board
Studies on the Properties of Epoxy Resins Modified with Novel Liquid Crystalline Polyurethane
Toughness Properties of Basalt/Carbon Fiber Hybrid Composites
Ultimate Strength Analysis of Ship Hulls of Continuous Basalt Fiber Composite Materials
Influence of Different Sintering System on the Formation of Tricalcium Aluminate
Research of Properties and Preparation on Zero-VOC Acrylic Elastic Emulsion
The Applications of Concrete Cut-Off Wall in the Reinforcement of the Earth Dam
Experimental Study on Utilization FGD Byproducts in Building Bricks
Preparation and Microscopic Analysis of Polyurethane Elastomer Made by Salix psammophila
The Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber Nanocomposites
Experimental Study on Mechanicial Properties of TRC Plate
The Effect of IrO2 Doping on the Structure and Magnetic and Magnetotransport Properties of La0.7Ca0.2Sr0.1MnO3 Composite
Research on Impact Behavior of Reactive Powder Concrete
Study on the Hydration Micro-Structure and Properties of Complex Cementitious Systems
Experimental Study on Salt Solution Ingress into Concrete under Capillary Siphon Effect
Preparation and Mechanical Properties of Nano-SiCp/Mg Composites by Ultrasonic Dispersion
Manufacturing and Mechanical Responses of Ti/APC-2 Nanocomposite Cross-Ply and Quasi-Isotropic Laminates at Elevated Temperature
Tribological Behaviors at High Load of MoSX/Au Films in Vacuum
New Tin-Functionalized Integrated Rubber for High Performance Green Tire Tread
Effect of CCWC on the Self-Healing Action and the Microstructure of Cement-Based Materials
Effects of CeO2-Rich Mixed Rare Earth on the Mechanical Properties of Al2O3-Mullite Based Foam Ceramics
Cure Kinetics and Thermal Property of UV-Curable Polyester Nanocomposites Coating Modified with MAP-POSS
Experiment Study on Mechanics and Pore Structure of Steel Fibre Reinforced Concrete
Stability and Ageing of Plasma Treated Wood/Polyethylene Composites Surfaces
Rheological Properties of PTT/POE/OMMT Composites
Preparation and Properties of the PTT/ABS/SCF Composites
Experimental Study on Precracked RC Beams Strengthened with Externally Bonded CFRP Sheets
Investigation on Microstructure and Properties of Heavily Cold Rolled Cu-Fe Alloys
Structure and Antibacterial Activity of Copper-Carried Zirconium Phosphates
A Novel Nanocomposite Based on Recycled Poly(Ethylene Terephthalate)/ABS Blends and Nano-SiO2
The Experimental Studies on the Prepartion of Steel Slag Cement by Gas Quenching Steel Slag
In Situ SiCp/Al-4.5 wt.% Cu Composites Obtained by Direct Reaction Synthesis
Thermal Stresses in a ZrO2/FGM/Ti-6Al-4V Composite ECBC Plate with Temperature-Dependent Material Properties
Thermal and Mechanical Properties of Boron-Containing Bisphenal-A Formaldehyde Resin Composites
Wear Behavior of Fe-Based Coating Fabricated by Plasma Thermal Spraying
Utilization of CFB Fly Ash in Eco-Cement: Mechanical Properties and Microstructural Analysis
Thermodynamics of Solvent Extraction of Perrhenate with N235 at High Concentration
A Study of Numerical Simulation and Experiment Investigation on ECMM Processing of PRMMC
Effects of PHZ and TiO2 on Image Properties of Silver Film Based on Photothermographic Materials
The Structural and Morphology of (La0.7Sr0.3)MnO3 Thin Films Prepared by Pulsed Laser Deposition
Study on Adsorption Mechanism and Dehumidification Property of Composite Desiccant
In Situ Growth of Hydrophobic TiO2 on Calocedrus macrolepis Kurz Wood Surface Using a Cosolvent-Controlled Hydrothermal Method
Fabrication of ZnO Nanodot Arrays by Sol-Gel within AAO Template
Relation between Interfacial Strength and Impact Properties of UHMWPE/LLDPE Laminates
The Experimentation and Imitation Study on Flow Field of Coherent Jet
Experimental Study on Dynamic Collision Characteristics of Concrete
Study on Network Structure C-Cu Composites of Pantograph Slide Plates
The Electrochemical Behavior and Microstructure of Chromium-Free Passivation Film on Galvanized Steel
Preparation, Characterization and Thermal Properties of Polyacrylonitrile/Alpha-Zirconium Phosphate Nanocomposites by Gelation/Crystallization
Cyclic Voltammograms of Chlorophenol Oxidation on Boron-Doped Diamond Electrode
Effects of Thermal Cycling and Freezing after Water Absorption on Tensile Properties of Green Composites
Study on Curing Behavior of Low Molar Ratio Urea-Formaldehyde Resins with Different Curing Agents
Study on Properties of Thin Layer Skid-Resistance Material in Tunnel Paving
Effect of Elements on Hot Tearing of Directionally Solidified Ni-Based Superalloys
Tribological Behavior of La2O3 Particulate Reinforced Copper Matrix Composites
The Geometric and Electronic Structures of Fen-1Si(n=2-7) Clusters
Synthesis of Latent Curing Agent for Epoxy Resin
Improved Photoluminescence from Ar+ and N+ Ions Co-Implanted Porous Silicon
Compressive Strength and Splitting Tensile Strength of Polyvinyl Alcohol Fiber Reinforced Ultra High Strength Concrete (PFRC)
Friction and Wear Behaviour of Al2O3 Particulates Reinforced Al-Mn Alloy Matrix Composites
Crack Resistance of Connections of Cross Shaped Steel Encased Ultra High-Strength Concrete Column to RC Beam under Cycle Loads
Water Permeability of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious Composites
Experimental Study on Flexural Strength of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious Composites
Preparation of EG-g-MWCNTs and Antistatic Poly(Ethylene Terephthalate) Nanocomposites
Analysis of Effection of the Prestressing Force on Shear Lag in Curved Box Girder
Prediction of the Strength Development of Fly Ash Concrete
The Preparation of Coatings with Codepositon Plating on A3 Steel and its Corrosion Resistance
Factor Analysis of Cracks Generated in 22CrMoH Steel Gear
Effect of Substrate Temperature on the Haze and Properties of SnO2: F Thin Film Coated on Glass (FTO) by Spray Pyrolysis Process
A Hot-Melt Thermosetting Phenolic Prepreg and its Composites
Modeling Corrosion Property of High Chromium Cast Iron under H3PO4 Medium Condition Using Artificial Intelligence
Regeneration of IMAC-Cu Proteinchip by Borate Eluent
The Research on the Mechanical Property of CBF/PP Composite Board
Effect of Sintering Temperature on the Properties of Sludge Ceramics and Fly-Ash Ceramics
Nanocrystalline NiO Thin Film Prepared by Sol-Gel Process
Preparation and Properties of Al2O3 Ceramic Reinforced Mo-Based Composites by Al(NO3)3 Precursor
Tearing Analysis of Coated Fabrics under Mono-Axial Tensile Stresses
Study and Application on Quick Repair Materials for Concrete Pavement
Study of the Bonding Property between Flanges and Web Plates of Wood I-Joist
Effect of the Simplifcation to Structural Systems on Nonliner Performance of Tall Buildings
Design and Choose Durability Assessment Parameter of Concrete in Salt Soil Region
Effect of Various Nanoparticles on Friction and Wear Properties of Glass Fiber Reinforced Epoxy Composites
Microstructure and Thermal Properties of Diamond-Al Composite Fabricated by Pressureless Metal Infiltration
Preparation and Properties of Rigid Polyurethane-Imide Foams
Preparation of Rigid Polyurethane-Imide Foams
Kinetic Study on the Preparation of Poly(Phenylene Sulfide Ether)
Properties of Particleboard Manufactured with Modified Urea-Formaldehyde Resin
The Effect of Thermal Aging on Tensile Strength of Three-Dimension and Five-Direction Braided Carbon Fiber/BMI Composites
The Influence of Purification of Ethyl Acrylate on the Properties of Cement Matrix
Decoloration of Methyl Orange by Mineral-Catalyzed Fenton-Like System of Natural Schorl and H2O2
A New Formula of Voids in the Mineral Aggregate (VMA) of Hot Mix Asphalt (HMA) and its Application
Carbon Nanotubes Reinforced Aluminum Matrix Composites by High-Energy Ball Milling
Preparation and Test of Polyurethane Foam Composites with Alkali Lignin/Renewable PUF
Effect of Silane Concentrations on Mode I Interlaminar Fracture of Woven Silk/Epoxy Composites
Experimental Study of Elastic Modulus of Crumb Rubber Plastic Concrete
Performance Evaluation of Large Stone Porous Asphalt-Rubber Mixture
The Investigation of Ultrahigh Pressuer Sintering of Cubic Boron Nitride with the Binding Agent of Si3N4
Preparation and Characterization of LPAAM Superabsorbent Composite
Strategic Thinking of Construction Material Based on Ecology
Effect of Dry-Wet Circulation and Temperature Change on Properties of Polyurea Coatings
Mechanical Property Effect of Na2SO4 on Cement-Reclaimed Asphalt Pavement Mixture
Effect of Super Slag Powder on Pore Structure and Compressive Strength of RPC
Preparation and Analysis of Kaolinite Intercalated by Potassium Acetate
Technology of Processing Mineral Superfine Powder Used in High Performance Concrete by DHM Grinder and its Characteristics
Experimental Research on Shape Retention of Tackified Woven Fabrics
Formation Mechanism of AlZrO and ZrAlON Phases in Al-ZrO2-N2 Systems
Kinetics and Mechanism of Mo(VI) Extraction with Trialkyl Amine Using a Constant Interfacial Cell with Laminar Flow
Discovery of Zr-Al-Ca-O Phase in Zr-Al-Ca-O-N Composites and its Synthesis
The Mechanisms of Epoxy Latex Coatings Curing at Ambient Temperature Comparison with Solvent-Type Ones
Quantum Chemical Calculation of Propylene Oxide Ring-Opening Esterification
Mesoporous Carbon with CNT Skeleton and their Electrochemical Properties
The Effect of the pH Value of Wood on the Curing Reaction of Low Toxic Urea-Formaldehyde Resin
Characterization and Photocatalytic Properties of Porous BiVO4-SiO2 Composites
Synthesis and Characterization of Gomuti-Graft-Polyacrylamide Flocculants
High-Performance Rust Converter with a Formula Based on Polyphosphoric Acid and Tannic Acid
Flexural Vibration in a Ternary Locally Resonant Phononic Crystal Thin Plate with Defects
Effect of RE on the Mechanical Properties of 7075 Al Alloy
First Principles Calculations of Optical Properties of Cu3N and Cu4N
Preparation and Properties of Silicon-Corundum-Silicon Nitride Composites
Development of IPMC Actuator for Flapping Motion of Dragonfly
Effects of Vacuum Annealing on Microstructure and Magnetostriction of TbDy-Fe GMFs
Experimental Study on Improving Abrasion Resistance of Sizing Crusher Tooth
Preparation and Characterization of the Tri-Channel Hollow Fiber Charged Mosaic Membrane
Shear Reinforcement of Air Plasma for GFRP-Wood Composite
Microstructure and Properties of Fe/Al2O3 Gradient Coatings on Steel Substrate
Toughening of Thermosetting Resins with Thermoplastic Polyimide: Thermal, Morphological, and Mechanical Characterization
Comparison of Hollow-Porous and Solid Carbon Fibers as Microwave Absorbents
Creep Modeling for Concrete Filled Steel Tubular Members Compressed with a Large Eccentricity
Monte Carlo Simulation of Magnetic Properties of Multilayer with Amorphous Surfaces
Simulation of Fabrication for Single-Phase Al2O3 Ceramic Tool Materials at Different Fabrication Temperature
Effect of Arc Discharge on Friction and Wear Behaviors of Stainless Steel/Copper-Impregnated Metalized Carbon Couple under Electric Current
Experimental Study on Flexural Fatigue Property of Ultra-High Toughness Cementitious Composites
Experimental Research on Residual Strength of Recycled Aggregate Concrete under Compressive Fatigue Loading
Sputter-Deposited Nano-Metal Films in a Short Period for Electromagnetic Shielding Textiles
Preparation and Electrochemical Performance of SnO2/Graphite/Carbon Nanotube Composite Anode for Lithium-Ion Batteries
Influence of Substrate Temperature on Silicon Nitride Films Deposited by R.F. Magnetron Sputtering
Effect of Beeswax on Functional and Structural Properties of Soy Protein Isolate Films
Experimental Study on Effects of Temperature on Characteristic Parameters of CFRP-Confined Concrete Prisms
HDPE/UHMWPE Blown Films Modified by POE and CaCO3
Investigation of Microstructure and Property of Fe3Al/Al2O3 Composites
Cure and Dynamic-Mechanical Behaviors of Vinyl Ester Resinfilled with Multi-Walled Carbon Nanotubes
Nanoparticle/Epoxy Nanocomposites: Impact, Flexural and Thermal Properties
The Preparation of TiO2 Film Loaded on Fiberglass Mesh and the Experimental Study on Its Photocatalytic Properties
Nondestructive Testing of Mechanical Properties of Pine Laminated Veneer Lumber
Microstructure and Properties of Fe-Based Laser Cladding Coatings Reinforced by In Situ Synthesized Multiphase Ceramic Particles
Study on the Processing Technology of Bamboo Mat/Bamboo Particle Composite Board
Effects of Different Pretreatments of Wood Fiber on Mechanical Properties of Biodegradable Composite
A Simple Experimental Method to Simulate the Fracture and Faults in Earthquakes
Analysis on Dynamics Characteristics of ICPF for Micro-Robot
Novel Antibacterial Nanofibers of Chitosan and Polyurethane Prepared by Electrospinning
Investigation on the Property and Air Void Structure of Foamed Cement-Fly Ash-Steel Slag Concrete
Effect of Zr on Thermal Stability of Cu-Fe In Situ Composite
Preparation and Properties of PLLA-co-bis A/VMT Nanocomposites
Effect of Gd Substitution on the Dielectric Properties and Magnetoelectric Effect of BiFeO3
Study on Synthesis of Methyl Methacrylate/Styrene Copolymer by Suspension Polymerization
Synthesis and Thermal Property of Poly(Allylamine Hydrochloride)
Coated Hydrophilic Thin Film on Glasses Using Freeze Drying-Assisted Sol-Gel Technique for Self-Cleaning Building Materials
Anti-Shear Reliability Analysis of Existing Pretension Prestressed Concrete Beam Bridges in the Corrosion Environment with Acid Rain
Residual Deformation Behavior of Reinforced Rock-Fill Materials
Study on Synthesis and Thermal Property of Polyvinylamine
Synthesis and Thermal Property of Linear Chloromethylated Polystyrene
Theory and Experiment of Isotropic Electromagnetic Beam Bender Made of Dielectric Materials
Research on the Strength Properties of the Magnesium Phosphate Cement (MPC) under the Sub-Zero Temperature Environment
Study on the Performance of Buckling-Restrained Brace with Low Yield Strength Steel
Fabrication and Mechanical Characterization of nmSiO2/EP Composites by Shock Wave Method
Factors Effect on Grain Refining of Nanocrystalline Copper Fabricated by Explosive Loading and its Dynamic Mechanical Property
Synthesis and Polymerization Kinetics of Copolymer Styrene-Vinyltrimethoxysilane by Emulsifier-Free Emulsion Polymerization
Processing Parameter Optimization of Flax Fiber Reinforced Polypropylene Composite
Study on Electrodeposition of Ni-Graphite Composite Coatings in Sulfamate Bath
Synthesis and Characterization of Poly(Styrene/n-Butyl Acrylate/Vinyltrimethoxysilane) by Emulsifier-Free Emulsion Polymerization
Effect of Ni2+ on Chromium Electrodeposition in Cr(III) Plating Bath
The Super-Capacitor Properties of Aligned Carbon Nanotubes Array Prepared by Radio Frequency Plasma-Enhanced Hot Filament Chemical Vapor Deposition
Immobilization of MSWI Fly Ash with Geopolymers
Energy Properties of Building Structures Subjected to Strong Earthquake
Interface Study of Short Mullite Fiber Reinforced Al-Cu-Si Alloy Composites
Damage Detection of Steel Domes Subjected to Earthquakes by Using Wavelet Transform
Combustion Synthesis of TiC-Fe Coating on Surface of a Plane Iron
Properties of Lightweight Concrete Masonry Units Made from Lightweight Aggregates
Influence of the Magnetic Interaction among Particles on Distributions of Magnetic Fluids Using Computer Simulations
Preparing and Characterization of the Geopolymer Based on Desulfurization Ash and Fly Ash
Reaction Behavior between Li and NiO Thin Film by EIS
Photocatalytic Activities of Visible-Light-Driven TiO2 Films Codoped with Aluminum and Nitrogen
Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform
Deposition of ZnO:Al Thin Films by Ultrasonic Spray Pyrolysis
Study on Material Selection and Manufacturing Process of Wind Turbine Blades
Tunable Multimode Filtering of Solid Acoustic Waves in a Three-Component Phononic Crystal Slab
In Situ Fabrication and Properties of Mg2Si/AZ91D Magnesium Matrix Composites
Applications of Biorthogonal Non-Tensor Trivariate Wavelet Traits in Construction Engineering Management
Research on Structure Stress Analysis on Composite by Lock-In Thermography
Study on Modification of the Magnesium Phosphate Cement-Based Material by Fly Ash
Electrochemical Copolymerization of Triphenylene and 3, 4-Ethylenedioxythiophene and Characterization of the Copolymer
Surface Intergrity of Inconel 718 under MQL Condition
Effect of Binary Admixture of Fly Ash and Slag on the Carbonation of Concrete for Hydraulic Structure
Open-Air Storage Time Impact on Performance of PSP Used as Concrete Admixture
Modification of Grooved Paulownia Wood Sandwich
Preparation and Mechanical Properties of Polyurethane Elastomer with Two Soft Segments of HTPB/PTMG
Application of the Calculator Technique in the Ability about the MMCs of the Anti-Vibration
Degradation of Orange IV Dye Solution Catalyzed by PVDF/ Fe3+/Cu2+ Membrane in the Presence of H2O2
In Situ Preparation of Magnetic P(AOS-St-BA)-Coated CoFe2O4 Composite Microspheres in Soapless Emulsion
Degradation of Orange IV Dye Solution Catalyzed by PVDF/Fe3+-TiO2 Catalytic Membrane in the Presence of H2O2
Application of S2O82-/FexOy Solid Super Acid as a Heterogeneous Fenton-Like Catalyst for the Degradation of Orange IV in Water
Abrasion-Resistance at High Temperature of HVOF-Sprayed WC-12Co Coating on H13
Solid Super Acid of S2O82-/FexOy-CuOx Catalytic H2O2 to Remove Organic Pollutants in Water
P. aeruginosa Inactivation with Silver and Nickel Doped TiO2 Film Coat on Glass Fiber Riving
The Thin Sheet Metal Rubber Pad Stamping for PEM Fuel Cell
Hydration Mechanism and Performances of Tri–Cementitous Materials System Compounded with Clinker Limestone Powder and Fly Ash
Effect of Annealing Conditions on Microstructure Evolution of NiMnFeGa Shape Memory Thin Film
Experimental Investigations of Shear Lag Effect in Orthotropic Composite Box Beam
Mechanical Property of Phosphoaluminate Cement
Synthesis and Properties of Fluorinated Polyimide Films Based on 1,2,3,4-Cyclobutanetetracarboxylic Dianhydride
Preparation of Cation Exchange Fiber by Preradiation-Induced Grafting of Acrylic Acid without Removal of the Inhibitor
Microstructure and Mechanical Properties of Sn-Bi Alloy Treated in the Semi-Solid State by Mechanical Stirring Process
Research on Sodium Citrate for Pulse Electrodeposition ZnSe Thin Films
Influence of Tunnel Excavation on Adjacent Underground Pipeline
Influence of Rare Earth Oxides on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials
Effect of Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic Materials
Research on the Dissolving Character of Active Si/Al in Fly Ash Activated by Alkali
Effect of Annealing Temperature on Properties of ZnO Thin Films
Effect of Bamboo Fiber Modification on Tribological Performance of Brake Composites
Study on Friction Properties of Cu-Fe-Based Powder Metallurgy Materials under Dry and Wet Friction Conditions
Study on the Mechanical Properties and Handle of PTT/Wool Blended Fabrics
Analysis of the Mineral Components and Strengths of the Cementuous Materials Produced with Iron Tailings
Finite Element Simulation of Tensile Behaviors in the Elastic Region for PP/Nano-TiO2 Composites
