Metastable, Mechanically Alloyed and Nanocrystalline Materials 1998

Erscheinungsjahr 1999
ISBN: 978-3-0357-2436-3
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volumes 2-6, 688 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Journal of Metastable and Nanocrystalline Materials

Metastable and Nanocrystalline Materials offer enormous technological potential and, for this reason, they are the subject of intense world-wide research.
Among the various topics covered in the present volume are the synthesis and processing of materials using mechanical alloying, grinding, mechanosynthesis and mechanochemistry; the structural characterisation of nanophase materials and the structural evolution caused by mechanical treatments; the magnetic and mechanical properties of nanocrystalline materials; and the basic mechanisms of fabrication processes.

Autoren/Hrsg.

Calka, A.

Wexler, D.

Inhaltsverzeichnis

Mechanical Alloying of Bulk Metallic Glass Forming SystemsBulk Mechanical Alloying for Productive Processing of Functional AlloysSynthesis of Amorphous and Nanostructured Materials by Gas Solid ReactionsMixing of Elements during Mechanical Alloying of Powder Mixtures of Fe and of T (T=V, Cr, Mn)Mechanically-Driven Solid State Amorphization and Nanocrystallization in SeleniumSynthesis and Properties of Mechanically Alloyed and Ball Milled High Strength Amorphous or Quasicrystalline Al-AlloysSolid State Amorphization of Fe50Nb50 Powders during Mechanical AlloyingMechanically Attrited Superconducting Y-TM-Borocarbides (TM=Ni, Pd)Formation of Cu-Zr-Ti Amorphous Alloys with Significant Supercooled Liquid Region by Mechanical AlloyingExplosive Formation of Titanium and Zirconium Oxide during Milling under O2 GasInvestigation of Combustion Reactions under Different Milling ConditionsMechanical Alloying of the Fe1-xMx (M=Si, Ge, Sn). A Comparative StudyBall Milling of Fullerene and Mechanical Alloying of Fullerene-Metal SystemsMechanically Milled Nanocrystalline Cubic Titanium Trialuminide and Iron Aluminide IntermetallicsThe Study of Structural Evolution and Thermal Stability of Ball-Milled Ti-Al and Ti-Al-Mn-Nb Nanocrystalline PowdersMechanical Alloying in Fe2O3-MO (M: Zn, Ni, Cu, Mg) SystemsMechanochemical Treatment of Haematite - Neutron Diffraction InvestigationMechanochemical Treatment of BaFe12O19 - M?ssbauer InvestigationMechanical Alloying and Milling of Zn-Rich Zn-Al-Cu AlloysChange in Structure of Mechanically Alloyed Fe-50%Al PowderActivated and/or Liquid Phase Sintering of Mechanically Milled Nanocrystalline PowdersSintering and Evolution of the Microstructure of Nanocomposite Powders Ag-SnO2 Prepared by Reactive MillingComparative Study of Barium Ferrite Prepared by Mechanical Milling and Co-PrecipitationAtomic Processes during Mechanical Compounding with Metal HydroxidesMechanochemical Synthesis of Boron Nitride NanotubesShort Range Order Evolution during the Nitrification of IVb MetalsSolid State Reduction of Iron Oxide by Ball-MillingMechanical Processing of Nanometric Magnesium Titanate PrecursorsStructural Investigation of Milled a-Fe and Barium Ferrite Nano-MixturesGas-Phase Hydrolysis of Tetraethyl Orthosilicate (TEOS)Mechanochemical Reactions on Copper-Based CompoundsMechanochemical Processing of Complex Sulphide OresSynthesis and Processing of Ultrafine Mg-PSZ PowderDeformation Induced Transformations of B2 FeAl and FeRhSynthesis and Processing of Nanostructured Cr3C2-NiCr Coatings using Mechanical Milling and HVOFEasy Glass Formation in La- and Pd-Based Alloys by Bridgman SolidificationAl-Fe-Nd Powders Prepared by Gas AtomisationSolidification of Germanium, Al-Based and Pd-Based Alloys under High PressureDeformation-Induced Effect of Phase Instability of Nanocrystalline AlloysMetastable Phase Formation and Microstructure Evolution from Undercooled Eutectic MeltsMechanically Activated Self-Propagating High Temperature Synthesis (MASHS) Applied to the MoSi2 and FeSi2 Phase FormationNanocrystalline FeAl Synthesis by MASHS with In Situ and Post Mortem CharacterizationsNano-Scaled Multilayered Bulk Materials Manufactured by Repeated Pressing and Rolling in the Ag-Fe and Cu-Fe SystemsNanosized Lead-Cadmium Inclusions in AluminumSynthesis and Properties of Ti-Based Bulk Amorphous Alloys with a Large Supercooled Liquid RegionCharacterisation of Crystalline and Magnetic Nanostructures by Small Angle Neutron ScatteringFivefold Twinning in Nanosized Particles and Nanocrystalline Thin Films - Ubiquitous Metastable StructuresReactivity in High-Energy Ball Milling Induced Self-Sustaining ReactionsMicrostructural Precursors for Decomposition of Nitrided Stainless Steels: A Comparison of Plasma Immersion Ion Implantation (PI3) and Reactive Ball MillingStructure of Mechanically Alloyed Ni-Mo PowdersAmorphization Kinetics of Ni60Nb40 during Mechanical AlloyingInfluence of Mechanical Alloying on Precipitation in Aluminium AlloyChange in the Short Range Order in the Al ? ?-MnOOH Mixed Systems by Mechanical StressingIdentification of Primary Crystals in ZrTiCuNiBe Metallic Bulk GlassesInvestigation of Nanoporous Carbon Powders Produced by High Energy Ball Milling and Formation of Carbon Nanotubes during Subsequent AnnealingStructures, Properties and Responses to Heat Treatment of Melt-Spun Cu-La AlloysNanostructures of Fe-Based AlloysLocal Structure of Amorphous Canonical Systems57Fe M?ssbauer Spectroscopy of Mechanically Alloyed Fe-50at.% AI PowderAtomic Distribution Change of Fe-Cu Solid Solutions Prepared by Mechanical AlloyingStructural Properties of Silicon Oxycarbide Powders Obtained by SOL-GEL MethodA Study of Al75Mo25 Nanocrystalline Alloys by X-Ray and Neutron DiffractionSurface Stress Problem in Heterogeneous Mechanochemical ReactionsOn the Modelling of Ultra-Fine Grained MaterialsComputer Simulation of Diffusion in Disordered SystemsOxidation Process of Nanocrystalline Ni in Ni-Al2O3-ZrO2 MixtureGrain Growth in Particle-Containing Metastable MicrostructuresCrystallization, Thermal and Elastic Properties of Zr-Ti-Cu-Ni-Be-C Bulk Amorphous Alloy under High PressureThe Thermal and Mechanical Behavior of the Vitreloy Type (Zr100-xTix)55(Ni45Cu55)22.5Be22.5 Bulk Metallic GlassesThermal Stability and Decomposition of Nanostructural Iron Nitrides Made by Reactive Ball Milling of Iron in AmmoniaInfluence of Nanocrystallization on Corrosion Resistance of Fe84Nb7B9 Amorphous AlloyCalorimetric and M?ssbauer Studies of the Nanocrystallized Fe90Zr7B3 AlloyA Comparative Study of the Nanocrystallization in Finemet and Nanoperm-Type Amorphous RibbonsNanocrystallization Studies of a Melt-Quenched Ni81P19 Amorphous AlloyAn Electrocatalytic Study of Mechanically Alloyed Cu-Ni AlloysRaney Type Surfaces Prepared by High Energy Ball Milling: Application to the Synthesis of Electroanalysts for the Sodium Chlorate IndustryNanocrystalline Soft Magnetic Materials: A Decade of Alloy DevelopmentCorrelation between Magnetic and Structural Parameters in Fe-40Al at % Nanostructured AlloysMagnetic Properties of Rapidly Quenched RE-Fe-Al Alloys with RE=Nd and YLow-Temperature Magnetic Behavior of Ball-Milled Copper FerriteSimulation of Structure and Magnetic Properties of Amorphous NiMagnetic Properties of Fe-Cu Solid Solutions Prepared by Mechanical AlloyingThe Ductility Problem in Nanocrystalline MaterialsMechanical Properties of Intermetallic/Ceramic Composites Prepared by High Energy MillingThe Effect of Grain Size on the Mechanical Properties of NiAl Produced by Mechanical AlloyingCompressibility of Ball-Milled Nanocrystalline Materials Determined at High Pressure: First ResultsOn the Cyclic Behavior of Ultra-Fine Grained Copper Produced by Equi-Channel Angular PressingSemi-Solid Plasticity of Nanocrystalline Cu-Mg-TiC Alloys Prepared by Mechanical AlloyingAcoustic Emission and Strain Localization in Ultra-Fine Grained Copper Produced by Equi-Channel Angular PressingStructure and Hydrogen Sorption Properties of Ball Milled Mg DihydrideNanostructured Colloidal Metal and Semiconductor ParticlesNovel Thermal Properties of Nanostructured MaterialsHardness and Corrosion Performance of Nanocrystalline Iron Powder Prepared by Ball Milling: Comparison with Different Iron Obtained by Conventional MethodsOn Corrosion of Ultra-Fine Grained Copper Produced by Equi-Channel Angular PressingSome Peculiarities in the Relaxation of Amorphous Ribbons Annealed by Joule Heating under StressesExperimental Investigation of the Formation Enthalpies of the Zr-Cu-Al Amorphous Alloys