Selected, peer reviewed papers from the 2013 International Conference on Application of Materials Science and Environmental Materials, (AMSEM 2013), July 5-7, 2013, Zhangjia Jie, China
Buch, Englisch, 650 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
ISBN: 978-3-03785-850-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committee
Chapter 1: Environmental, Ecologic Materials and Technologies, Health Applications
Study on Optimization Quartz Mine for Removal Gas-Liquid Inclusions in Quartz Sand under Microwave and Acid Corrosion
Development of the Tunnel Wet Dust Precipitator and Testing
Preparation of Floating TiO2/EP by Hydrothermal Method
The Research on the Heat Transfer Process of Low Temperature Hot Water Radiant Heating Phase Change Wallboard
Determination of the Competitive Ion Exchange Isotherms of Taurine and Glycine on D290 Resin by Inverse Method
A New Type of Self-Assembled Fluorescent Chemosensor
A Preliminary Study on Influence of Anion Created by Anion-Fiber Used for Decorative Material on People's Physiology and Psychology
The Environmental Effect of Radioactive Particles in the Contaminated Sites with Resuspended Plutonium Aerosols
Study on Application of Artificial Sand in Ready-Mixed Concrete
Preparation and Characterization of Composite TiO2/Natural Cotton Nanofiber Material
Based on Molecular Distillation Waste Organic Matter Reduction Processing Technology Research
Application of Priority Analysis and Algorithm Topsis in the Optimization of Ambient PM2.5 Monitoring Sites – Taking Beijing as an Example
The Best Culture Conditions of Rhodopseudomonas spp. by Orthogonal Experiment
Experimental Study on Regularities of Carbonation for CO2 Capture Using Ammonia Solution
Research on Recycling and Utilization of Waste Ink
Removal of Methylene Blue from Aqueous Solution by Adsorption on Low-Grade Green Coffee Beans
Review on the Unbroken Three-Dimensional Network Modification Methods of Waste Rubber Powder
The Investigation of the Deicing Salt Effect on Soil in Beijing
Study of Reborn Concrete Block Using Construction Wastes
Comparative Study on the Different Coagulants for Mine Water
The Activity and Characterization of Pd/Ce0.5Zr0.5O2 Catalyst for the Reduction of NO
Oxidation Treatment of Phenol Contaminated Soil Using Potassium Ferrate (K2FeO4)
Research and Discussion of the Low-Salt Dyeing of Reactive Dyes
Structure and Thermal Stability of Sugarcane Bagasse Cellulose Regenerated from Dialkylphosphate Ionic Liquids
Performance Analysis of the Domestic and Imported Portable SO2 Gas Analyzers for Stationary Pollution Source
Study of the Microstructure of Industrial Residues and its Application in High Performance Concrete
Study on the Infrared Property and the Structure of Schorl Calcined at the High Temperature
Source Apportionment of Heavy Metals in Sediment Using CMB Model
Experimental Research on Fly Ash Modified Adsorption of Mercury Removal Efficiency of Flue Gas
Difference Analysis of the Organic Acids Content of the Different Leaf Position in Flue-Cured Tobacco
The Factors Affecting the Stem Water Potential of Tamarix ramosissima Lbd. in the Extremely Arid Regions
Study on Experimental System for High Temperature Ceramic Filter
Effects of Sepiolite and Mycorrhizals on Nutrient Element Absorptions of Maize in Heavy Metals Contaminated Soil
Desorption of Anthracene from Soil in Presence of Surfactant and Nanomaterial
Research on a Technique of Eco-Friendly Chemical Conversion Coating
Preparation of Adsorbents Based on Dendrimer Modified Silica Gel and its Adsorption Performances for Lead
Optimization of Enzyme-Assisted Lycopene Extraction from Tomato Processing Waste
Research of Heavy Metal Particle and Ions Absorption Mechanism of Ordinary Portland Cement Materials
The Research on the Mechanical Properties of the same Curing Agent of Different Soil Dredged Mud
Chapter 2: Materials Engineering Research, Materials in Manufacturing Processes
Research Progress of Slicing Method for Solar Silicon Wafer
Dynamic Buckling Behaviors of Steel Cylindrical Shell Subjected to Conventional Explosion Impact Loading
Porosity Formation after the Irradiation Termination of Laser
Study of High-Power White LED's Lifetime Based on Accelerated Life Test
Molecular Dynamics Simulation of Thermal Conductivity of 3C-SiC Nanowire
Study on Ultrasonic Measurement for Non-Uniform Stress Field
Mechanical Structure Strength Analysis of Field Refueling Tank Based on ANSYS
Study on the Influences on Microstructure and Properties of High-Strength Grey Cast Iron in Addition to Alloying Elements Nb
Effects of Y, Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy
SVM Based Seismic Fragility Analysis for RC Isolated Continuous Girder Bridge
Finite Element Analysis on Connecting Rod Fracture Splitting with Abaqus
Experimental Research on Shape-Stabilized Phase Change Materials Applied in the Phase Change Wall
Preparation of Coherent La0.85Sr0.15MnO3 Thin Films on La0.6Sr0.4Co0.2Fe0.8O3 Substrates
Electroless Silver Plating Process on Al-Ag Alloy Powder
A Novel Green-Emitting Phosphor: LiLa2BO5:Ce3+,Tb3+ with High Luminescence Efficiency
The Effects of Small Additions Ga and Al on the Microstructure and Tensile Properties of Sn-Zn Based Lead-Free Solders
Constitutive Equation of Mg-3.5Zn-0.6Y-0.5Zr Alloy under Hot Compression Deformation
Preparation and Photocatalytic Property of Zinc Oxide Nanoparticle
The Basic Research and Application on Hot Forming of High Strength Steel
Research on High Ductility Cementitious Composites Improved by Water-Soluble Polymer and Micro-Fibers
Study on the Welding Process and Application of Al/Cu Materials
Free-Template Synthesis of Cu2O Nanocubes via Hydrothermal Route
Artificially Induced Defects in Photonic Crystals and their Optical Properties
The Magnetic Properties of Fe-6.5wt.%Si Alloy Powders Produced by High Pressure Gas Atomization
A Review on Engineering Application of FRP Material: Case Study and Practice
Fabrication of Strong Photoluminescent Carbon Nanodots and its Preliminary Application in Cell Imaging
Study on the Run-in Process between the Contact Line and Saddle of High-Speed Rail
Effect of Technical Factors on the Quality of Surface Composite Layer
Analysis on the Contact Mechanics between Tip and Sample in Atomic Force Acoustic Microscope Method
Effect of Hydraulic Classification on Iron Ore Tailings Preparing High Strength Construction Materials
Entity Simulation of Rectangle Preform for 3D Braided Composite Based on ANSYS
Assessment of Heat Resistant Concrete of Magnesia-Phosphate
Force Analysis of Steel Column Base Plate Base on the Interaction Principle
Preparation and Friction Performance of the Nano Ag-APS Single Molecular Self-Assembled Film
Weibull Analysis of the Effect of Modified Aging Treatments on Fatigue Life of Cast Aluminium Alloy 354
Durability of Concrete Containing Wollastonite and Fly Ash
Effect of Cathodic Protection Systems with Zn-Mesh Sacrificial Anodes on Reinforced Concrete Structures in an Accelerated Marine Environment
Influence of Heat Treatment on the Microstructures and Properties of Mg-12Li-3Gd-3Y-0.6Zr Alloy
Microstructures and Mechanical Properties of Magnesium-Lithium Alloys by Homogenizing Treatment and Thermal Process
Study on Short Basalt Fiber Reinforced Silicone Rubber Composites
Chapter 3: Chemistry Materials and Environmental Chemistry
Factors Evalution of Particle Size Distribution of Heavy Oil Emulsion
Low-Temperature Hydrothermal Synthesis and Electrochemical Properties of Birnessit-Type Manganese Dioxide Nanosheets
Structural, Magnetic, and Transport Properties of La0.62Sb0.38MnO3 Ceramic
Optical Properties of Water-Soluble Er-Doped ZnS Quantum Dots Synthesized by a Hydrothermal Process
Preparation of PANI Nanotubes by Template Electrosynthesis
Degradation of Polyacrylamide: A Review
Thermochemical Properties of Dissolution of Nitroguanidine in Dimethyl Sulfoxide and N,N-Dimethylformamide
Selective Oxidation of Glycerol with O2 Catalyzed by Fluorine-Modified CuNiAl Hydrotalcite
The Effect of Chain Length on Polyelectrolyte Brushes Formed from Adsorption of Diblock Copolymers
The p Bond of C2H4 and 2HX(X=F,Cl,Br,I) Interaction
Sub-Micrometer SiO2@ZnMoO4:Tb3+ Core-Shell Phosphors: Sol-Gel Synthesis and Characterization
Study on Adhering Technology of Silicone Foam Surface
Synthesis and Properties of P2O5-SnO2-ZnO Penetrated into Silica Aerogel Matrix by Sol-Gel Technique
One Based Magnetic Oxygen Carrier Solid Fuel Chemical Looping Combustion System Simulation
The Influence of Interactions between Polyethylene Glycol and Graphene Oxide in Shape-Stabilized PCMs on their Phase Change Behaviors
Preparation and Photocatalytic Activity of TiO2/Tourmaline Composite Catalyst
The Preparation and Research of Microcapsules in Self-Healing Coatings
Study on the Adsorption of O-Aminobenzoic Acid (OABA) with the Adsorption Resins Modified Chemically
Chapter 4: Energy, Fuel Materials and Engineering
Output Voltage Control of PEM Fuel Cell Based on Neural Network
The Research of Electrochemical Properties of Al-Mg-Sn-Ga-Bi Alloys in Alkaline Electrolyte
Effects of Solid Solution Treatment and Rolling Treatment on Electrochemical Properties of Al Anode Alloy
Influence of Temperature Distribution on Products Quality in 3KA Rare Earth Electrolytic Cell
The Effect of CTAB Additive on Performance of Layered Cathode Material Li0.96Na0.04Ni1/3Co1/3Mn1/3O2
Hybrid Supercapacitors Based on Polyaniline/Activated Carbon Fiber Composite Electrode Materials
Thermo-Gravimetric Analysis and Kinetic Study of Biomass Pyrolysis
Kinetic Investigation of Thermal Decomposition Reactions of 4'-Demethypodophyllotoxin and Podophyllotoxin
Facile Synthesis of Graphene Nanosheets and their Anode Electrochemical Performances in Lithium Ion Batteries
Platinum Nanoparticles Supported on Noncovalent Functionalized Graphene as Cathode Catalysts for Aluminum-Air Batteries
Electro-Copolymerization of Poly(N-Vinylcarbazole) and 3-Methylthiophene
Chapter 5: Prevention of Water Environment Pollution
The Optimization of Pb(II),Cu(II),Zn(II) and Cd(II) Ions Removal by Micro-Electrolysis Using Response Surface Methodology
Recovery of Polyvinyl Alcohol Wastewater with Sodium Polyphosphate
Application of the Intelligent Control System of Biological Aerated Filter Wastewater Treatment
Destruction of EDTA by Bimetallic Al-Fe/O2 Process under Aqueous Room Temperature and Pressure Conditions
Research on a New Method of Treating Organic Wastewater and Equipment
Chloramphenicol Removal from Wastewater by UV/H2O2 Advanced Oxidation Process
Experimental Study of the Porous Plate Hydrodynamic Cavitation Device and Removal the Algae in Water
Humic Acids Degradation and Membrane Fouling in Photocatalytic MF Systems for Drinking Water Treatment
Study on the Treatment of Oil Shale Retort Wastewater by High Performance Compact Reactor
Preparation of Carboxymethyl Cellulose Sodium/PEI Nanofiltration Membrane
Polluted River Water Treatment Using Multi-Soil-Layering System (MSL) in Different Surface Loads
Application of CRBD to Reducing Pollution of Leather Tanning Wastewater
Preparation of Mn-Fe Binary Oxide for Arsenic Removal from Aqueous Solution
Degradation of Ammonium butyl-dithiophosphate by Fe2+/NaClO Process
Surface Modification of PS Super-Filtration Membranes with Low Temperature Plasma
Solar Biogas Digester and Wetland-Pond System for Rural Wastewater Treatment
Experimental Research on Adsorption Treatment of Military Agent Contaminated Water Using Activated Carbon
