Buch, Englisch, 596 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-03785-321-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Study on the Mechanics State of Concrete under Penetration and the Deceleration of Projectile
Innovation Status and Trends of Korea Nano-Sensor Technology from a Perspective of Patent Analysis
Study of Depth-Dependent Tetragonal Distortion of GaN Epilayer with Tri-Layer AlGaN Interlayer Growth on Si(111)
Magnetic Confinement of Plasmas Generated by Coaxial Twinned Electron Cyclotron Resonance (ECR) Discharge
Research on Carbon Dioxide Corrosion of Cement Stones of Oil Well Casings under High Temperature and High Pressure
Application of High Performance Concrete with Compound Admixtures of Fly Ash and Perlite Powder in Pavement of Highway
Study on the Experiment of Adsorption Cadmium (II) with Insoluble Starch Xanthate
Study on Treatment of Cr (VI)-Containing Wastewater with Nitric Acid Modified Activated Carbon
Measurements of Shearing Property of High N Alloy Steel at Super High Strain Rates
Effect of Seismic Characteristics on Seismic Energy Response of Bridge
Seismic Energy Response Analysis for Bridge Structures of Passenger Dedicated Line
Study on Dynamic Performance of Novel Isoprene Rubber Synthesized with Homogeneous Rare-Earth Catalyst System
The Experimental Study of Natural Sedimentation in Heavy Oil
The Experimental Study on the Performance of Anchor Material of Mooring System for Deepwater Drilling
The Impact on Asynchronous Motor during High Voltage Power Quick Switching Process
The Study of Chaos Control in Power System
Research of Photovoltaic Grid System Voltage Stability Based on the Bifurcation Theory
The Effect of Surface Coating on Thermal Manikin’s Stability
A Coordinating Procedure for Tracing Static Bifurcation Points of Voltage Instability
Fabrication and Wear Behavior Investigation of the Carbon/Epoxy Composites Based on Wood Using Artificial Neural Networks
Study of Asphalt Thermal Stability Based on Microscopic Analysis Techniques
Mechanochemical Synthesis and Characterization of FeNi-Al2O3 Nanocomposites
Research on Compression and Bending Resistance Characteristics of Logs
Fuzzy Logic Modeling of Porous Carbon Body Fabrication from Cellulose Based Materials
Research and Assessments of Geomagnetically Induced Currents
A Sensitivity Study of Structure Behavior of Strengthened Beams for Buried High-Pressure Steel Bifurcation
Temperature Characteristic of Immobilization Proteins on Pt Surface Based on Silicon Substrate
Design of Reconstruction and Extension Projects of the Wastewater Plant of an Ordnance Repairing Factory
Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48
Application of Bailey Method for Aggregate Grading Design of Continuous Dense Gradation Asphalt Mixture
Rapid Deposition of Hydroxyapatite on Mg-Alloy by Biomineralization Method
3D-FEM Stability Analysis of Fault Fractured Zone of Road Tunnel
Excavation Effect of Tunnel Slope Reinforced with Anti Sliding Pile in Cold Regions Based on 3D-FEM
Citric Acid on the Hydration Mechanism of Cement
Survey on Micro-Grid Technology
Design of Matrix Converter Vector Control System Based on DSP and CPLD
Experimental Study on Anti-Shear Properties of Floor Heave Control Anchor of Deep Soft Rock
Nitrogen Concentration in N-Implanted Gold on the Formation of Gold Nitride
The Mix Design of Low Strength High Flowing Concrete with Low Cement Content Prepared by Manufactured Sand
Microstructure of Magnesium-Aluminum Metal Matrix Composites Reinforced with 2wt.% SiC Particles
Regulation Behavior of Microwave Reflectivity in Magnetorheological Fluids
The Influence Factor of Removal Humic Acid from Wastewater Using Cucurbiturils
Application of Stress Intensity to Design of Bi-Materials with a Wedge
Finite Element Simulation Model for High Temperature 4H-SiC Devices
Application Conditions on Acoustic Emission (AE) Technique Monitoring Coal and Rock Dynamic Disasters in Mines
Research on Coating Dispersion of Liquid Wear-Resistant Decorative Paper
Evaluation of Low Temperature Performance for Diatomite Modified Asphalt Mixture
Relativity Analysis on the Detection Methods of Compaction Degree for Expressway Subgrade
Abrasive Wear Behaviour of MoB/CoCr Cermet Coatings under Different Parameters
Development in Wear Resistance of Fe-0.7Cr-0.8Mn Milling Balls through In Situ Reinforcing with Low Weight Percent TiC
Tensile Properties of Steel Fiber-Reinforced Reactive Powder Concrete after High Temperature
A Numerical Method to Analyze some Simple Planar Frames Subjected to Concentrated Loads with Elastic Large Deflection
Dynamic Stability Analysis of Viscoelastic Beam under the Follower Forces
Study on the Effect of Shield Tunnel Construction on Underground Pipeline Deformation by Experiment and Monitoring
Study on Wear and Friction Resistance of CrTiAlMoN Coatings Deposited by Magnetron Sputtering
Research on Effect of Erbium Salt in the Anodization of Aluminum
Preparation of Controlled-Release Tablets of Sasanquasaponin Using Broomcorn-Stalk and its Performance
Research on Wear Behavior of NBR by 45 Steel in Crude Oil Medium
Reliability Analysis of Subgrade Bearing Capacity of Gravity Foundation of Wind Turbine Based on JC Method
Building the Mathmatical Model of Elastic Deformation for Rolls System by Four-High Mill Strip Rolling with a Composite Back-Up Roll
Finite Element Analysis of Horizontal Reinforcement Ratio's Effect on Seismic Performance of Autoclaved Aerated Concrete Block Masonry
Effect of Nano SiO2 on the Performance of Asphalt Emulsion and its Residue
Analysis Acid Corrosion Behavior of Epoxy Coating under Stress
State of the Art Stainless Steel Provides Improved Properties for Widely Varying Applications
Experimental Research on Cutting Temperature of Cemented Carbide Tools during Cutting Austenitic Manganese Steel
An Research on Self-Fused Alloy Coating by High Frequency Induction Treatment
The Analysis on Track-Memory of Omnidirectional Fire Robot
An On-Line Fatigue Life Monitoring System for Boiler Drums Based on the Inverse Problem of Heat Conduction Method
Study of Mastic-Aggregate Interfacial Adhesion in Cement Emulsified Asphalt Mixture Based on the Discrete Element Method (DEM)
Preparation and Characterization of Cu2O Thin Films by Electrodeposition
Study and Application of Homogeneous Rare Earth IR/NR Blends in Tread Compound of All-Steel TBR Tire
Electrochemical Research on Cl- which Destroys the Surface Passivation Film of T23 in Supercritical Water Tubes
Optimisation of 4H-SiC Enhancement Mode JFETs for High Performance and Energy Efficient Digital Logic in Extreme Environments
An Investigation of Environmental Reduction Factor for GFRP Bar Used as Concrete Reinforcement in China
Study on Rational Width of Entry Protection Coal-Pillar in Large Mining Height Working Face
Investigation of Surface Coating Preparation of High-Aluminum Bronze Alloy by Induction Remelting Process
Meshing Efficiency of Globoidal Indexing Cam Mechanism with Steel Ball
Investigation of Microstructure and Machinable Mechanism of the B4C/BN Composites Fabricated by Hot-Pressing Process
The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP Treatment
Kinetics Study on Non-Isothermal Crystallization of Amorphous Alloy Mg65Cu15Ag10Y10
Influence of Zinc on the Microstructure and Brittle Phases of Friction Stir Welded Joint of Al / Ti Dissimilar Alloys
A Research on the Forward Slip Coefficient in Alloyed Bar Rolling by the Round-Oval-Round Pass Sequence
New Reactive Compatibilizer B Preparation and its Application in Polystyrene Ether/Nylon 66 Alloy
Study on In Situ Monitoring of the Surrounding Rock Pressure of the Shallow Large-Span Tunnel in the Tunnel Construction Process
Synthesis and Antibacterial Activity of Acetyl Ferrocene Hydrazine Hydrazone and its Metal Complexes
Free Surface Processing Parameters such as the Curvature Analysis
Study on SBS Modified Asphalt Emulsion and Aggregate Adhesion of CA Mortar
The Experimental Study on the Road Asphalt Fumes Inhibitors
Thermo-Chemical Analysis of a Calcination Furnace to Produce Cathode Material for the Secondary Batteries
Crash Simulation of Straddle-Type Monorail Vehicle Body and Human Injury Research
Orthogonal Experiment Study on the Hydrogen Desorption Properties of NaAlH4 and LiAlH4
Study of Destabilization Mechanism of Concrete Component Based on Catastrophe Theory
Strong Interlocked Skeleton Dense Gradation for Cement-Fly Ash Stabilized Crushed-Stones
Evaluation of Fast Neutron Inserted to RPV Materials and Management of RPV Lifetime for PWR Power Plant
Research of the Connecting Form about the Spherical Shell and the Nozzle
Cluster Glass Behavior of Doped Cobaltite Nd0.80Sr0.20CoO3
Experimental Study on Seismic Behaviors of Structural Insulated Panel Shear Walls under Cyclic Loading
Composite Polymer Materials and the Details Made of them for Cotton Machines and Mechanisms
Developing of Effective Multipurpose Polymer-Bitumen Compositions
Effective Technology of Obtaining the Carboxymethyl Cellulose from Annual Plants
Effective Composite Chemical Reagents Based on Organic and Inorganic Ingredients for Drilling Fluids Used in the Process of Drilling Oil Wells
Effective Composite Materials for Friction Pairs of Working Bodies of Cotton Machines
An Online SMC-Based Adaptive Wavelet-Neural Controller for Uncertain Nonlinear Systems with only Output Measurement
GFRP Bar Reinforced Concrete Bridge Deck: Stress in GFRP Bar under Ultimate Design Loads
