Sonstiges, Englisch, Band Volume 1024, 426 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1024, 426 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-909-1
Verlag: Trans Tech Publications
The 94 papers are grouped as follows:
Chapter 1: Nanomaterial Research and Application,
Chapter 2: Polymer Materials and Composites,
Chapter 3: Functional and Structural Materials, Material Processing Technologies,
Chapter 4: Micro/Nano Materials for Bio/Medical Application,
Chapter 5: Materials and Technologies for Electric and Electronic Application
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Design and Synthesis Silica-Polyelectrolyte-Iron Oxide Nanocomposite with Magnetic-Catalytic Bifunctionalities for Dye RemovalEffect of Calcination Temperature on the Morphological and Phase Structure of Hydrothermally Synthesized Copper Ion Doped TiO2 NanotubesNanoclay for Micropollutant Removal in Wastewater-Effective Alternative?S-Parameters of Bismuth Iron Garnet (BIG) Filled Polyvinylidene Fluoride Composite Using Rectangular Waveguide MethodControlled Growth of ZnO Nanoparticles with Different Morphologies Using Sol-Gel TechniqueImproving the Production of Self-Assembled ZnS:Mn Nanocrystals through the Modification of Sol Gel ? Spin Coating ApproachesFabrication of Anodic Alumina Templates on Ti/Si Substrate and Preparation of Cu Nanorods by Electrochemical ProcessP-Incorporated TiO2 Nanotube Arrays by Wet Impregnation Method for Efficient Photocatalytic ActivityCarbon Dioxide Capture at Various Temperatures Using Ca(OH)2 Sorbent Fabricated by Sol-Gel Route in Ethanol MediaFe-TiO2 Nanoparticles by Hydrothermal Treatment with Photocatalytic Activity EnhancementFormation of Platinum Nanodendrites Embedded Organic Insulator for Memory ApplicationSimulation and Fabrication of Silicon Field Emission Cathodes for Cold Electron SourcesSynthesis and Characterization of Zn-Al Layered Double Hydroxide (LDH) Nanocomposite Intercalated with Sodium Dodecyl Sulfate (SDS)The Effect of Zinc Oxide and Aluminum Oxide Nanoparticles on Interfacial Tension and Viscosity of Nanofluids for Enhanced Oil RecoveryEffect of Metal Catalysts Type and Annealing Time on the Growth of Zinc Oxide Nanostructures by Thermal Vapor Deposition MethodEffect of Oxygen Flow Rate on the Memristive Behavior of Reactively Sputtered TiO2 Thin FilmsSynthesis of CdSe Nanoparticles: Control of Reaction TemperatureThe Effect of Hydrothermal Reaction Time on Formation of AuNPs by Sacrificial Templated Growth Hydrothermal ApproachCharacterization of ITO/Ag and ITO/Ni Bi-Layer Transparent Conductive ElectrodesFabrication of Gold Nanoparticles on Multiwalled Carbon Nanotubes NanohybridsMicrowave Synthesis of ZnO Nanoparticles for Enhanced Oil RecoverySynthesizing Vertically Aligned Zinc Oxide Nanowires on Borosilicate Glass Using Vapor Trapping ApproachPreparation of WO3 Nanorods by Seeded Growth Hydrothermal ReactionFormation and Characterization of TiO2 Scattering Layer Deposited by Spray Pyrolysis for DSSCEffect of Applied Voltage on the Formation of Self-Organized Iron Oxide Nanoporous Film in Organic Electrolyte via Anodic Oxidation Process and their Photocurrent PerformanceElectrolyte Influence on the Morphologies of Anodic ZrO2 Nanotube Arrays Formed by AnodizationSynthesis of Titanium Dioxide Nanoparticles in Natural Rubber Latex MediumMorphology Controlled Ionothermal Synthesis and Characterization of Ceria NanomaterialsMicro Powder Injection Moulding Using Nanosized PowdersCharacterization of Nanocrystalline p-CuO/n-Si Hetrojunction Prepared by RF-SputteringDeposition of Gold Nanoparticles on Linker-Free Silicon Substrate by Spin-CoatingThe Effect of Crystallinity of Nanoporous WO3 on the Intercalation and Deintercalation of Li+Effect of Annealing Temperature of Hybrid CeO2/TiO2 Nanotubes on the PhotocurrentEffects of Graphene Nanopletelets on Poly(Lactic Acid)/Poly(Ethylene Glycol) Polymer NanocompositesComparison on Tensile Properties of Graphene and Multi-Walled Carbon Nanotubes/Epoxy Thin Film CompositesFinite Element Analysis and Preliminary Fabrication of Flexible Membrane with Embedded Magnetic NanoparticlesCure Kinetics of High Performance Epoxy Molding CompoundsGlass Fibers with Multi-Functional Capabilities for Engineering and Environmental ApplicationsInfluence of Ground Tyre Rubber Devulcanisates on Morphology and Properties of Tread Tyre FormulationPreparation of Linear Low-Density Polyethylene-g-Poly(Acrylic Acid)-Co-Starch HydrogelA Spectroscopic Study on the Polymer Colour Transition for Indicating the Exposure to Ionizing RadiationAlkali Treatment of Kenaf Fiber Mat and its Influence on the Performance of Unsaturated Polyester/Kenaf Fiber Mat CompositesInfluence of Mixing Procedure on Properties of Silica Filled Epoxidised Natural Rubber CompoundsTensile Properties of Poly(L-Lactic) Acid(PLLA) BlendsThe Influence of Starch Gelatinization on Mechanical Properties of Natural Rubber Latex FilmsEffect of Lamination Layers on Tensile Properties and Mould Cleaning Efficiency of Laminated NBR Latex CompositeChemical Depolymerisation of Natural Rubber in Biphasic MediumThe Production of Green Polymer - Hyperbranched Curable Palm Oil Oleic AcidEffects of Binders System on Sintered Properties of Metal Injection Molding Parts of M2 High Speed SteelTungsten Inert Gas Surface Alloying of Commercial Purity Titanium (CP-Ti) with Fe-C-Si Ternary MixturesCharacterization of Ceramic Tiles Added with EAF Slag WasteOptimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface PropertiesThe Influence of ECAP Pass through Bc Route on Mechanical Properties of Aluminum Alloy 6061Microstructure, Wettability and IMC Formation of Low-Ag SAC Solder on Cu SubstrateFriction Stir Processed of 6061-T6 Aluminum Alloy Reinforced with Silica from Rice Husk AshSolidification of Aluminum Copper Alloy during Twin Roll Strip CastingEffect of Feldspar Content on Electric Arc Furnace Slag (EAFS) Added TilesPhase Studies in WC-Stainless Steel AISI 347 Hardmetal System with Graphite AdditionHot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE)Preparation of Globular Microstructure Aluminum Alloy Using Cooling Slope Casting as Feed Material for Equal Channel Pressing ProcessEffect of Grain Refiner on Microstructure of Semi-Solid A356 Aluminium AlloyEffect of Sintering Duration on Pure PZT for Piezofan ApplicationEffect of Different Thickness of Core Layer on Tensile Properties of Laminated Natural Rubber Latex FilmUtilization of Sludge from Sidoarjo Mudflow for Zeolite SynthesisEffect of Needle Punching Direction on Nonwoven Fiber Mat to the Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Vacuum Assisted Resin Transfer MoldingDevelopment of Silver-Coated Gold Nanoparticles and its Conjugation for Labeling on Lateral Flow ImmunoassayThe Effect of Oxygen Precursor Concentration to the Iron Oxide Nanoparticles Properties for Lateral Flow Immunoassay ApplicationCrytallization and Properties of SiO2-Al2O3-K2O-ZrO2 Glass-Ceramics for Dental ApplicationsThe Design of Elastin-Like Polypeptides (ELPs) as a Nanoparticulate-Based Therapeutic and Diagnostic Imaging AgentLoading and Unloading Properties of Encapsulated Methylene Blue in Silica Nanoparticles for Photodynamic ApplicationsPoly (Vinyl Alcohol) in Fabrication of PLA Micro- and Nanoparticles Using Emulsion and Solvent Evaporation TechniqueAn In-Situ Functionalization of Decanethiol Monolayer on Thin Silica Coated Superparamagnetic Iron Oxide Nanoparticles Synthesized by Non-Seeded ProcessEffect of Ageing Temperature on the Microstructures and Mechanical Properties of Ti-Nb Shape Memory AlloysLow Young's Modulus ?-Ti Alloys for Biomedical ApplicationsEffect of Sintering Temperature on the Diametral Tensile Strength of ?-Tricalcium Phosphate BlockPolyethylene Glycol Diacrylate Microgels from Irradiated MicellesEffect of Annealing on the Properties of SnSe Film Prepared by Thermal Vacuum Evaporation in the Presence of Argon GasPolyaniline Binder for Functionalized Acetylene Black: A Hybrid Material for SupercapacitorDielectric Relaxation in Lanthanide Doped/Based Oxides Used for High-k LayersElectrochemical Stability of High Conducting PAN-Based Electrolytes for Lithium Ion Polymer CellsThe Structure and Electrochemical Performance of LiNi0.3Co0.3Mn0.3Cr0.1O2 Cathode MaterialsLuminescence of Sr2MgSi2O7 Phosphor Prepared by Solid State ReactionIonic Transport and Electrochemical Properties of PMMA-Based Gel Polymer Electrolytes for Magnesium BatteriesEnergy Bandgap Engineering of ZnO Using Impurity Elements for Solar Cell Applications: A DFT StudyGrowth and Characterization of (100) and (111) 3C-SiC Thin Film for MEMS Capacitive Pressure Sensor for Extreme EnvironmentsPost-Deposition Annealing in Nitrous Oxide Ambient of RF-Magnetron Sputtered Y2O3 Film on Silicon SubstrateEffects of Post-Deposition Annealing Time on Metal-Organic Decomposed Lanthanum Cerium Oxide Film Spin-Coated on Si SubstrateSynergetic Effect of In and Ag Co-Doped ZnS for Enhanced Photocatalytic Hydrogen Evolution under Visible Light IrradiationCompact and Energy-Efficient Field Emission Cathodes for Sensor ApplicationsEnergy Balance Assessment of Magnetic Materials as Theoretical Hint for Formulation of Interoperable Magnetic-Mechanical EquationEffect of Thickness of Porphyrin on Electrical Properties of Organic DevicesSilicon Based Thermoelectric Cells with Built in Solar Cells and CNT Composite Based Thermoelectric Cells for Measurement of Gradient of TemperatureDielectric Properties of BaTiO3/Epoxy and MWCNT/Epoxy CompositesStructural and Leaching Properties Study of Ce and Pr Lead Silicate Glasses
