Selected, peer reviewed papers from the 3rd International Conference on the Advancement of Materials and Nanotechnology 2013 (ICAMN III 2013), November 19-21, 2013, Penang
Buch, Englisch, 426 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 870 g
ISBN: 978-3-03835-213-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committees
Chapter 1: Nanomaterial Research and Application
Design and Synthesis Silica-Polyelectrolyte-Iron Oxide Nanocomposite with Magnetic-Catalytic Bifunctionalities for Dye Removal
Effect of Calcination Temperature on the Morphological and Phase Structure of Hydrothermally Synthesized Copper Ion Doped TiO2 Nanotubes
Nanoclay for Micropollutant Removal in Wastewater-Effective Alternative?
S-Parameters of Bismuth Iron Garnet (BIG) Filled Polyvinylidene Fluoride Composite Using Rectangular Waveguide Method
Controlled Growth of ZnO Nanoparticles with Different Morphologies Using Sol-Gel Technique
Improving the Production of Self-Assembled ZnS:Mn Nanocrystals through the Modification of Sol Gel – Spin Coating Approaches
Fabrication of Anodic Alumina Templates on Ti/Si Substrate and Preparation of Cu Nanorods by Electrochemical Process
P-Incorporated TiO2 Nanotube Arrays by Wet Impregnation Method for Efficient Photocatalytic Activity
Carbon Dioxide Capture at Various Temperatures Using Ca(OH)2 Sorbent Fabricated by Sol-Gel Route in Ethanol Media
Fe-TiO2 Nanoparticles by Hydrothermal Treatment with Photocatalytic Activity Enhancement
Formation of Platinum Nanodendrites Embedded Organic Insulator for Memory Application
Simulation and Fabrication of Silicon Field Emission Cathodes for Cold Electron Sources
Synthesis and Characterization of Zn-Al Layered Double Hydroxide (LDH) Nanocomposite Intercalated with Sodium Dodecyl Sulfate (SDS)
The Effect of Zinc Oxide and Aluminum Oxide Nanoparticles on Interfacial Tension and Viscosity of Nanofluids for Enhanced Oil Recovery
Effect of Metal Catalysts Type and Annealing Time on the Growth of Zinc Oxide Nanostructures by Thermal Vapor Deposition Method
Effect of Oxygen Flow Rate on the Memristive Behavior of Reactively Sputtered TiO2 Thin Films
Synthesis of CdSe Nanoparticles: Control of Reaction Temperature
The Effect of Hydrothermal Reaction Time on Formation of AuNPs by Sacrificial Templated Growth Hydrothermal Approach
Characterization of ITO/Ag and ITO/Ni Bi-Layer Transparent Conductive Electrodes
Fabrication of Gold Nanoparticles on Multiwalled Carbon Nanotubes Nanohybrids
Microwave Synthesis of ZnO Nanoparticles for Enhanced Oil Recovery
Synthesizing Vertically Aligned Zinc Oxide Nanowires on Borosilicate Glass Using Vapor Trapping Approach
Preparation of WO3 Nanorods by Seeded Growth Hydrothermal Reaction
Formation and Characterization of TiO2 Scattering Layer Deposited by Spray Pyrolysis for DSSC
Effect of Applied Voltage on the Formation of Self-Organized Iron Oxide Nanoporous Film in Organic Electrolyte via Anodic Oxidation Process and their Photocurrent Performance
Electrolyte Influence on the Morphologies of Anodic ZrO2 Nanotube Arrays Formed by Anodization
Synthesis of Titanium Dioxide Nanoparticles in Natural Rubber Latex Medium
Morphology Controlled Ionothermal Synthesis and Characterization of Ceria Nanomaterials
Micro Powder Injection Moulding Using Nanosized Powders
Characterization of Nanocrystalline p-CuO/n-Si Hetrojunction Prepared by RF-Sputtering
Deposition of Gold Nanoparticles on Linker-Free Silicon Substrate by Spin-Coating
The Effect of Crystallinity of Nanoporous WO3 on the Intercalation and Deintercalation of Li+
Effect of Annealing Temperature of Hybrid CeO2/TiO2 Nanotubes on the Photocurrent
Effects of Graphene Nanopletelets on Poly(Lactic Acid)/Poly(Ethylene Glycol) Polymer Nanocomposites
Comparison on Tensile Properties of Graphene and Multi-Walled Carbon Nanotubes/Epoxy Thin Film Composites
Chapter 2: Polymer Materials and Composites
Finite Element Analysis and Preliminary Fabrication of Flexible Membrane with Embedded Magnetic Nanoparticles
Cure Kinetics of High Performance Epoxy Molding Compounds
Glass Fibers with Multi-Functional Capabilities for Engineering and Environmental Applications
Influence of Ground Tyre Rubber Devulcanisates on Morphology and Properties of Tread Tyre Formulation
Preparation of Linear Low-Density Polyethylene-g-Poly(Acrylic Acid)-Co-Starch Hydrogel
A Spectroscopic Study on the Polymer Colour Transition for Indicating the Exposure to Ionizing Radiation
Alkali Treatment of Kenaf Fiber Mat and its Influence on the Performance of Unsaturated Polyester/Kenaf Fiber Mat Composites
Influence of Mixing Procedure on Properties of Silica Filled Epoxidised Natural Rubber Compounds
Tensile Properties of Poly(L-Lactic) Acid(PLLA) Blends
The Influence of Starch Gelatinization on Mechanical Properties of Natural Rubber Latex Films
Effect of Lamination Layers on Tensile Properties and Mould Cleaning Efficiency of Laminated NBR Latex Composite
Chemical Depolymerisation of Natural Rubber in Biphasic Medium
The Production of Green Polymer - Hyperbranched Curable Palm Oil Oleic Acid
Effects of Binders System on Sintered Properties of Metal Injection Molding Parts of M2 High Speed Steel
Chapter 3: Functional and Structural Materials, Material Processing Technologies
Tungsten Inert Gas Surface Alloying of Commercial Purity Titanium (CP-Ti) with Fe-C-Si Ternary Mixtures
Characterization of Ceramic Tiles Added with EAF Slag Waste
Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties
The Influence of ECAP Pass through Bc Route on Mechanical Properties of Aluminum Alloy 6061
Microstructure, Wettability and IMC Formation of Low-Ag SAC Solder on Cu Substrate
Friction Stir Processed of 6061-T6 Aluminum Alloy Reinforced with Silica from Rice Husk Ash
Solidification of Aluminum Copper Alloy during Twin Roll Strip Casting
Effect of Feldspar Content on Electric Arc Furnace Slag (EAFS) Added Tiles
Phase Studies in WC-Stainless Steel AISI 347 Hardmetal System with Graphite Addition
Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE)
Preparation of Globular Microstructure Aluminum Alloy Using Cooling Slope Casting as Feed Material for Equal Channel Pressing Process
Effect of Grain Refiner on Microstructure of Semi-Solid A356 Aluminium Alloy
Effect of Sintering Duration on Pure PZT for Piezofan Application
Effect of Different Thickness of Core Layer on Tensile Properties of Laminated Natural Rubber Latex Film
Utilization of Sludge from Sidoarjo Mudflow for Zeolite Synthesis
Effect of Needle Punching Direction on Nonwoven Fiber Mat to the Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Vacuum Assisted Resin Transfer Molding
Chapter 4: Micro/Nano Materials for Bio/Medical Application
Development of Silver-Coated Gold Nanoparticles and its Conjugation for Labeling on Lateral Flow Immunoassay
The Effect of Oxygen Precursor Concentration to the Iron Oxide Nanoparticles Properties for Lateral Flow Immunoassay Application
Crytallization and Properties of SiO2-Al2O3-K2O-ZrO2 Glass-Ceramics for Dental Applications
The Design of Elastin-Like Polypeptides (ELPs) as a Nanoparticulate-Based Therapeutic and Diagnostic Imaging Agent
Loading and Unloading Properties of Encapsulated Methylene Blue in Silica Nanoparticles for Photodynamic Applications
Poly (Vinyl Alcohol) in Fabrication of PLA Micro- and Nanoparticles Using Emulsion and Solvent Evaporation Technique
An In-Situ Functionalization of Decanethiol Monolayer on Thin Silica Coated Superparamagnetic Iron Oxide Nanoparticles Synthesized by Non-Seeded Process
Effect of Ageing Temperature on the Microstructures and Mechanical Properties of Ti-Nb Shape Memory Alloys
Low Young's Modulus ß-Ti Alloys for Biomedical Applications
Effect of Sintering Temperature on the Diametral Tensile Strength of ß-Tricalcium Phosphate Block
Polyethylene Glycol Diacrylate Microgels from Irradiated Micelles
Chapter 5: Materials and Technologies for Electric and Electronic Application
Effect of Annealing on the Properties of SnSe Film Prepared by Thermal Vacuum Evaporation in the Presence of Argon Gas
Polyaniline Binder for Functionalized Acetylene Black: A Hybrid Material for Supercapacitor
Dielectric Relaxation in Lanthanide Doped/Based Oxides Used for High-k Layers
Electrochemical Stability of High Conducting PAN-Based Electrolytes for Lithium Ion Polymer Cells
The Structure and Electrochemical Performance of LiNi0.3Co0.3Mn0.3Cr0.1O2 Cathode Materials
Luminescence of Sr2MgSi2O7 Phosphor Prepared by Solid State Reaction
Ionic Transport and Electrochemical Properties of PMMA-Based Gel Polymer Electrolytes for Magnesium Batteries
Energy Bandgap Engineering of ZnO Using Impurity Elements for Solar Cell Applications: A DFT Study
Growth and Characterization of (100) and (111) 3C-SiC Thin Film for MEMS Capacitive Pressure Sensor for Extreme Environments
Post-Deposition Annealing in Nitrous Oxide Ambient of RF-Magnetron Sputtered Y2O3 Film on Silicon Substrate
Effects of Post-Deposition Annealing Time on Metal-Organic Decomposed Lanthanum Cerium Oxide Film Spin-Coated on Si Substrate
Synergetic Effect of In and Ag Co-Doped ZnS for Enhanced Photocatalytic Hydrogen Evolution under Visible Light Irradiation
Compact and Energy-Efficient Field Emission Cathodes for Sensor Applications
Energy Balance Assessment of Magnetic Materials as Theoretical Hint for Formulation of Interoperable Magnetic-Mechanical Equation
Effect of Thickness of Porphyrin on Electrical Properties of Organic Devices
Silicon Based Thermoelectric Cells with Built in Solar Cells and CNT Composite Based Thermoelectric Cells for Measurement of Gradient of Temperature
Dielectric Properties of BaTiO3/Epoxy and MWCNT/Epoxy Composites
Structural and Leaching Properties Study of Ce and Pr Lead Silicate Glasses
