Towards an Immersive Breakthrough
Buch, Englisch, 800 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1310 g
ISBN: 978-3-03835-448-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Organizing Committee, Sponsors and Participants of the Conference
Chapter 1: Advanced Ceramics
The Effect of CuO on NiO Electroceramics
Characteristics of Porous Sb-Doped Barium Titanate Ceramics Fabricated by Adding Graphite
Complex Impedance Spectroscopy Studies of BaTiO3 Ceramic with 10% BaFe12O19 Substitution
Effect of Co3O4 Doping on Nonlinear Coefficient in Zn-Bi-Ti-O Varistor Ceramics
Influence of Grain Size on the Thermal Diffusivity of Pt-SnO2 Ceramic
Influence of NiO Nanoparticles on Physical Properties of TiO2 Doped Magnesium Ultra-Phosphate Glass-Ceramics
Solid State Sintering and Microstructural Evolution on Wide Frequency Range Dielectric Responses of Mechanically Activated CaTiO3 Ceramics
Temperature Dependence on Dielectric Response of La0.7Ba0.3Mn0.4Ti0.6O3 Ceramic
Structural and Luminescence Properties of Eu3+ and Dy3+ Doped Magnesium Tellurite Borophosphate Ceramic
Impedance Spectroscopy in Ni0.3Zn0.7Fe2O4
Chapter 2: Catalytic Materials
Catalytic CO2/H2 Methanation Reaction over Alumina Supported Manganese/Cerium Oxide Based Catalysts
Effect of Calcination Temperature on Metal Oxides and their Photocatalytic Activity
Effect of Cu Addition onto CaO/Al2O3 Catalyst for Naphthenic Acid Removal from Crude Oil
Green Technology Purification of Nature Gas via CO2/H2 Methanation by Using Trimetallic Ru/Mn/Fe-Al2O3 Oxide Catalyst
ESR Study of K-Mo2C for Increased Catalytic Properties
Comparative Study Based on Activation Procedure Using Air and Nitrogen Gas to Synthesis Nanoparticles Cu/Al2O3 Catalyst
Chapter 3: Composites and Polymers
A Study of N-Isopropyl Acrylamide (NIPAM)-Based Polymer Gel Dosimeter by Using Raman Spectroscopy
Characterizations and Morphology of MWCNTs-SiC Nanoparticles Reinforced PLA/NR/LENR Composites
Effect of Vulcanization Additive on Cure Characteristics and Physical Properties of Silica Filled Epoxidised Natural Rubber Truck Tyre Tread Compound
Tensile and Dielectric Properties of Calcium Copper Titanate Filler in Epoxy Composites
Tensile Properties and Melt Flow Index of Polypropylene/Ethylene Propylene Diene Monomer Nanocomposites
The Effects of Halogen-Free Flame Retardant Additives in Epoxidized Natural Rubber (ENR)
Preparation of Lignopolyols by Chemical Modification of Kraft Lignin from Oil Palm Lignocellulosic Waste
Chapter 4: Electrochemical
Anions Effect on the Electrical Properties of PMMA/ENR 50 Blend Electrolytes
Structural, Morphological and Electrical Characteristics of Sol-Gel Prepared Lithium Triflate - Alumina Composite Electrolyte
The Effect of LiCF3SO3 Complexed MG30-PEMA Blend Solid Polymer Electrolyte
Characterisations of Palm-Based Polyurethane Solid Polymer Electrolyte
Chemical Interaction, Conductivity and Thermal Properties of Kappa Carrageenan Based Polymer Electrolytes
Conductivity and Thermal Behaviour of Epoxidized-30% Poly (Methyl Methacrylate)-Grafted Natural Rubber-Lithium Triflate Based Solid Polymer Electrolytes
Conductivity-Temperature Dependent Studies on MG49 Doped Lithium Triflate Salt
Effects of Acid Modified SiO2 on Ionic Conductivity and Blend Properties of LiBF4 Doped PMMA/ENR 50 Electrolytes
Effects of Bu3MeNTf2N Ionic Liquid Addition on Conductivity of PVC-NH4Tf Polymer Electrolytes
The Effect of HCl Concentration on the Ionic Conductivity of Liquid PMMA Oligomer
Effects of Different Concentration in (w/v)% of Carboxymethyl Iota-Carrageenan Based Green Polymer Electrolyte
Electrochemical Behavior of Carbon Steel in Acidic Medium Containing Cationic Inhibitor
Impedance Behavior of Treated Methyl-Grafted Natural Rubber Polymer Electrolytes
Interaction between Carboxy Methylcellulose and Salicylic Acid Solid Biopolymer Electrolytes
Ionic Conductivity and Dielectric Properties of CMC Doped NH4SCN Solid Biopolymer Electrolytes
Ionic Conductivity via Quantum Mechanical Tunneling in NH4NO3 Doped Carboxymethyl Cellulose Solid Biopolymer Electrolytes
Structural Study of Plasticized Carboxy Methylcellulose Based Solid Biopolymer Electrolyte
Structural and Ionic Conductivity Studies of CMC Based Polymerelectrolyte Doped with NH4Cl
Chapter 5: Manganite and Magnetic Materials
Influence of Grain Formation on Electrical Properties of La0.67Sr0.33MnO3
Influence of Molar Ratio of Citric Acid to Metal Ions on Structure, Microstructure and Electrical Transport Properties on Nanosized La0.85Na0.15MnO3
Physico-Chemical Properties of Silica Coated Superparamagnetic Magnetite Nanoparticles Synthesized by Non-Seeded Process
Effect of Sintering on Structural and Transport Properties on Nanosized Pr0.85Na0.15MnO3
Fabrication and Electrical Properties of Strontium Doped Lanthanum Manganite Titanite Oxide
Effect of Sintering Temperature on Structural, Electrical and Magnetic Properties of La0.7Sr0.3MnO3
Chapter 6: Nanomaterials and Nanotechnology
Synthesis, Structural and Morphological Properties of Cadmium Oxide Nanoparticles Prepared by Thermal Treatment Method
Comparative Study of the Electrospun PAN Nanofiber Reinforced with CNT and CNF: Effect on Morphology, Thermal Stability and Electro-Conductivity Properties
RETRACTED: Fabrication and Characterization of Nanospinel ZnCr2O4 Using Thermal Treatement Method
Surface States and Band Gap Correlation in Silicon Nanoclusters
The Effect of Ni Catalyst on the Growth of Multi-Walled Carbon Nanotubes by PECVD Method
Chemical Surface Modification of CNTs via Three Oxidative Acid Treatments
Effect of Calcination on the Basic Strength of Surface Modified Nano-Zinc Oxide Characterised by FTIR and Back Titration Methods
Chapter 7: Materials and Technologies in Waste Utilization and Environmental Engineering
Deacidification of Acidic Petroleum Crude Oil Utilizing a Formulated Basic Chemical
Efficient Oxidative Desulfurization (ODS) of Commercial Diesel with TBHP under Mild Conditions Catalyzed by Polymolybdates Supported on Al2O3
Preparation and Characterization of Activated Carbon from Waste Rubber Tires: A Comparison between Physical and Chemical Activation
Effect of Mixed-Phase TiO2/PVA Nanofibers on the Degradation on Methyl Orange
Screening of Factors Affecting Pre-Treatment by Ammonia-N Removal from Poultry Manure Wastewater by Using Soil Water to Improve Biogas Production
Surface Modification of Graphitic Mesoporous Carbon Adsorbent by Chemical Oxidation for Removal of Basic Dye from Aqueous Solution
Effect of Strontium on the Catalytic Activity and Physicochemical Properties of Ru/Mn Catalysts for CO2 Methanation Reaction
Influence of Zirconium Doped Titanium Oxide towards Photocatalytic Activity of Paraquat
New Polyester Nanofiltration (NF) Membrane for Humic Acid Removal
Chapter 8: Technology of Glass
FTIR and UV-Vis-NIR Spectral Studies of Borotellurite Glass
Growth of Hydroxyapatite on Strontium Oxide Modified Bioactive Glass
Influence of Samarium on the Optical Response of Zinc Phosphate Glass
Optical Absorption in Erbium Doped Phosphate Glass Embedded with Cobalt Nanoparticles
Optical Absorption of Er3+/Nd3+ Codoped Lithium Niobate Tellurite Glass
Optical Absorption of Erbium Doped Zinc Phosphate Glass Containing Fe3O4 Nanoparticles
Optical Properties of [(TeO2)0.7 (B2O3)0.3]1-x (Bi2O3)x Glass System
Optical Properties of Eu3+-Doped Lithium Tellurite Glass
Optical Properties of Oxy-Chloride Tellurite Glass: Role of Samarium Ions
Samarium Concentration and Optical Correlation of Tellurite Glass
Samarium Ions Concentration Dependent Optical Enhancement in Phosphate Glass
Temperature Stability and Physical Properties of Bi2O3-B2O3-ZnO-RHA Glass System
The Role of Samarium Ion in Optical Properties of Magnesium Tellurite Glass Embedded with Silver Nanoparticles
Thermal and Structural Properties of Erbium/Neodymium Co-Doped Lithium-Magnesium-Tellurite Glass
ZnO Nanoparticles Concentration Dependent Optical Properties of Erbium Doped Phosphate Glass
Aqueous Corrosion Investigation of Yb Doped Lead Oxychloride Tellurite Glass
Chapter 9: Materials and Technologies in Electronics and Optoelectronics
An Investigation of Structural and Electronic Properties of Novel Cathode Material Li2MnP2O7 and its Delithiated Li2-xMnP2O7 (x=1,2): A First Principle Study
Density Functional Theory (DFT) Calculation of Band Structure of Kesterite
Effect of the Ge Mole Fraction on the Electrical Characteristics of Single and Dual Channel Vertical Strained SiGe Impact Ionization MOSFET (VESIMOS)
DFT Investigations of Ti, V Doped ZnO Based Diluted Magnetic Semiconductors
First Principles Study on Structural and Electronic Properties of LiFeSO4F Cathode Material for Lithium Ion Batteries
Modelling and Simulation Approach for Organic Thin-Film Transistors Using MATLAB Simulation
Multiple Regression Model on Optical Properties of Tin Oxide Thin Film
Annealing Effect on Photoacoustic Characterization of NiSe Metal Chalcogenide Semiconductor Using Phase Signal Analysis
Impedance and Resistivity Behavior of Graphene Oxide-Activated Carbon Hybrids
Fabrication and Analysis of Photoelectrochemical Properties of Dye Sensitized Solar Cell Using Local Borneon Natural Dye Extracts
Synthesis of Graphene via Green Reduction of Graphene Oxide with Simple Sugars
Effect of CdS Thickness on the Optical and Structural Properties of TiO2/CdS Nanocomposite Film
Thermoluminescence Characteristics of Aluminium Oxide Doped Carbon Exposed to Cobalt-60 Gamma Radiation
Luminescence Properties of Europium Ion Doped Barium Borophosphate Phosphor
Theoretical Studies on Optical Phonon and Surface Phonon Polariton of Wurtzite AlInN Alloys
Structural and Electronic Properties of Hydrogen-Passivated Silicon Quantum Dots: Density Functional Calculations
Formation of Kirkendall Voids at Low and High Aging Temperature in the Sn-0.7Cu-1.0wt.%Si3N4/Cu Solder Joints
The Microstructure Evolutions of Sn-0.7Cu Solder Using Microwave-Assisted Sintering Method at Various Exposure Times
Chapter 10: Superconductor Materials
Effect of Sintering Temperature on the Superconducting Properties of MgB2 Superconductor Co-Added with a High Concentration of Si and C
Effects of Gamma Ray Irradiation on High Temperature Superconductors YBCO with Nanoparticles Fe3O4 Addition
Porosity Effect on Superconducting Properties of YBa2Cu3Od and YCaBa4Cu6Od
Structural and Superconducting Properties of Bi-Based Low Density HTSC
Synthesis and Characterization of Low Density Bi-2223 Superconductors via Co-Precipitation Method
The Influence of Sintering Time in High and Low Density Bi-2223 Superconductor
Chapter 11: Materials and Technologies in Production of Thin Films
In Situ Cadmium Suflide Synthesis in Polymer Thin Film for Solar Cells Application
Biopolymer-Based Thin Film for Sensor Application
Morphological and Optical Properties of Different Mg Percentage of ZnO/Mg Thin Films Prepared by Sol-Gel Spin-Coating and Immersion Method
Effect of Duty Cycle on Pulse Electrodeposited Tin Seleno Telluride Semiconductor Thin Film
Effect of Morphology on SnO2/MWCNT-Based DSSC Performance with Various Annealing Temperatures
Effect of RF Power on the Chemical Bonding and Humidity Sensing Properties of a-CNx Thin Films
Structural Properties of Al2O3:C:Mg Thin Films by RF Magnetron Sputtering
Growth and Characterization of Aln Thin Film Deposited by Sol-Gel Spin Coating Techniques
Naphthoyl-Thiourea Thin Film as Potential OLED Featuring Methyl Pyridine Moiety
Effect of Flexible Substrates on the Structural and Optical Properties of ZnO Films Deposited by Sputtering Method
Chapter 12: Sensors and Techniques of Measurements in Materials Science and Production
Effect of Gamma Radiation on ZnO Doped PVA Nanocomposite Thin Films for Escherichia coli Sensor
High Sensitivity Optical POF Sensor for Detecting Low Ethanol Concentration in Water
Modular Surface Plasmon Resonance (SPR) Biosensor Based on Wavelength Modulation
Synthesis and Characterization of PVA-Ag Doped Metals (Co, Al) Nanocomposite Thin Films Biosensors for Detection of E. coli in Water
Evaluation of Bulk Etch Rate of Solid State Nuclear Track Detector CR-39
ZT Measurements of Thermoelements under Large Temperature Difference
Simulation of Malaysian Small Angle Neutron Scattering Using Monte Carlo
Corrosion Behavior of Fe-12Cr-2Mo Stainless Steel in Na2SO4-50%NaCl with Flowing Ar-20%O2 Environments at High Temperature
