Sonstiges, Englisch, Band Volumes 554-557, 2600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
Sonstiges, Englisch, Band Volumes 554-557, 2600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-03795-469-0
Verlag: Trans Tech Publications
The collection of 282 peer reviewed papers aims to promote the interest for all types of materials and all topics connected to Material Forming.
The papers are grouped as follows:
Chapter 1: Formability of Metallic Materials
Chapter 2: Forging and Rolling;
Chapter 3: Composites Forming Processes;
Chapter 4: Semi-Solid Processes;
Chapter 5: Light Weight Design and Energy Efficiency in Metal Forming;
Chapter 6: New and Advanced Numerical Strategies for Material Forming;
Chapter 7: Extrusion and Drawing;
Chapter 8: Friction and Wear in Material Processing;
Chapter 9: Nano-Structured Materials and Microforming;
Chapter 10: Inverse Analysis Optimization and Stochastic Approaches;
Chapter 11: Innovative Joining by Forming Technologies;
Chapter 12: Multiscale & Continuum Constitutive Modelling;
Chapter 13: Incremental and Sheet Metal Forming;
Chapter 14: Sheet-Bulk-Metal Forming;
Chapter 15: Heat Transfer Modelling;
Chapter 16: Structures, Properties and Processing of Polymers;
Chapter 17: Non-Conventional Processes;
Chapter 18: Machining and Cutting;
Chapter 19: Integrated Design, Modelling and Reliability Assessment in Forming (I-DMR);
Chapter 20: Finite Element Technology and Multi-Scale Methods for Composites, Metallic Sheets and Coating Models;
Chapter 21: Intelligent Computation in Forming Processes.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Transient Negative Strain Hardening during Severe Plastic Deformation of Al-30wt%Zn AlloysCorrelation of Tensile Test Parameters and Bendability of High-Strength SteelsFormability of Hybrid Aluminum-Magnesium CompoundsAnalysis of the Deformation Behavior of Ti-6Al-4V at Elevated TemperaturesAccurate Evaluation Method for the Hydraulic Bulge TestA Cruciform Shape to Study the Influence of Strain Paths on Forming Limit CurvesDuctile Failure Modelling in AA5182 Aluminium Alloy Sheet FormingHot Tensile Behavior of Superplastic and Commercial AA5083 Sheets at High Temperature and Strain RateCrystal Plasticity Finite-Element Simulation of Deformation Behavior during Unloading under Compression in Magnesium Alloy SheetAchieving High Strains in Sheet Metal Characterization Using the In-Plane Torsion TestJoint Strength of SPCC/A5052P-H Joint Welded by Laser Butt Welding with CompressionNumerical Modeling of Ductile Plastic Damage in Tensile TestInfluence of Dislocations on the Deformability of Metallic SheetsDuctile Damage in Tension and Bending for DP980 Steel SheetsOn the Influence of Cold Rolling Parameters for 14CrW-ODS Ferritic Steel CladdingsA Theoretical Study of the Effect of the Double Strain Path Change on the Forming Limits of Metal SheetMaterial Modeling of High Strength Steel Sheet Using Multiaxial Tube Expansion Test with Optical Strain Measurement SystemStress Relaxation for Formability ImprovementEffect of Material Model on Finite Element Modeling of Aerospace AlloysSubmicrocristalline Structure and Dynamic Recovery of Cold Flowformed ELI Grade Ti-6Al-4VPrediction of Surface Roughening and Necking Behavior for Metal Foils by Inhomogeneous FE Material ModelingDesign of an Experimental Device for Biaxial Tension Tests Used in a Uniaxial Test MachineDetermination of Flow Curve Using Bulge Test and Calibration of Damage for Ito-Goya ModelsDeep Drawing of Ti6Al4V: Experiments and Modeling over a Wide Range of Strain Rates and TemperaturesAnalysis of the Incremental Forming of Titanium F67 Grade 2 SheetEffect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming ProcessesOn the Development and Identification of Phenomenological Damage Models - Application to Industrial Wire Drawing and Rolling ProcessesOptimization Analysis of A7075 Bicycle Stem Forging ProcessSensitivity Analysis to Optimise the Microstructural Properties of an Inconel 718 Component Manufactured by Rotary ForgingApplication of a Fast Calculation Model for the Process Monitoring of Open Die Forging ProcessesApplication of Combined Casting-Forging Process for Production of Durable Lightweight Aluminum PartsEffect of Different Finish-Rolling Parameters on the Microstructure and Mechanical Properties of Twin-Roll-Cast (TRC) AZ31 StripsInvestigation on the Influence of Manufacturing Parameters on the Fatigue Strength of ComponentsExperimental & Numerical Study of the Hot Upsetting of Weld Cladded BilletsFinite Element Simulation as a Tool to Evaluate Gear Quality after Gear RollingDie and Process Design for Hot Forging of a Gear Wheel ? A Case StudyTime-Efficient and Precise FEM/BEM Simulation of a Cold Forging Process Verified by Tool Load DeterminationMethodology to Straighten the End Parts of Long WorkpiecesSpeed Roll Laws Influence in a Ring Rolling ProcessPotential of Duplex Plasma Deposition Processes for the Improvement of Wear Resistance of Hot Forging DiesBeta Forging of Ti-6Al-4V: Microstructure Evolution and Mechanical PropertiesComputer Aided Design of Manufacturing of Anchors and Formulation of the Optimization Task for in Use PropertiesExperimental Study of Steel and Glass Knitted Fabrics Thickness under Pre-Strain and ShearTwo-Scales Kinetic Theory Model of Short-Fibers AggregatesEffect of Tow Meander on the Shear Compliance of Woven Engineering Fabrics Measured Using the Biaxial Bias Extension TestSimulation of Composite Forming at Meso ScaleIdentification of Fibre Degradation due to Friction during the Weaving ProcessIdentification of Forming Limits for Unidirectional Carbon Textiles in Reality and Mesoscopic SimulationForming of a Non-Crimp 3D Orthogonal Weave E-Glass Composite ReinforcementAnalysis of the Blank Holder Force Effect on the Preforming Process Using a Simple Discrete ApproachMonolithic Approach of Stokes-Darcy Coupling for LCM Process ModellingExperimental Setup to Validate Textile Material Models for Drape SimulationValidation of Macroscopic Forming Simulations of a Unidirectional Pre-Impregnated Material through Optical MeasurementsNumerical Modelling of the Weaving Process for Textile CompositeCharacterization of Cured Composite Materials for Wind Turbine BladesFinite Element Modeling of Unidirectional Non-Crimp Fabric for Manufacturing of Composites with Embedded CablingAnalysis of the Stress Components during the Forming of a Textile Composite ReinforcementFormability of Fiber-Reinforced Thermoplastics in Hot Press Forming Process Based on Friction PropertiesExperiment Study of Thermoforming of Plain Woven Composite (Carbon/Thermoplastics)Simple Tests as Critical Indicator of Intra-Ply Shear LockingYield Stress in Semi-Solid Alloys ? The Dependency on Time and Deformation HistoryRheology of Blast Furnace Slags Admitted High Concentration of Titanium OxidesApplication of X-Ray Microtomography to Quantify the Liquid Fraction of M2 Steel for Semi-Solid Forming ProcessMicrostructure Analysis of High-Manganese TWIP Steels Produced via Strip CastingAdvances in the Twin-Roll Strip Casting of Strip with Profiled Cross SectionThixoforging of Ultrasound Treated 6060 Aluminum AlloyThermal Profiles and Fraction Solid of Aluminium 7075 at Different Cooling Rate ConditionsLaser Surface Modification of AISI 1025 Low Carbon Steel Using Pulsed Nd:YAG Laser for Enhance Surface PropertiesThermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray TechniqueCold Piercing of Cylindrical Aluminum Billet with Counter Punch PressureEnergy-Efficient Solid Forward Extrusion through Hybridization Based on Process-Integrated Resistance HeatingBasic Experimental and Numerical Investigations on Chip PressingCoupled Thermo-Mechanical-Metallurgical Analysis of an Hot Forging Process of Titanium AlloyHot Stretch Forming of a Titanium Alloy Component for Aeronautic: Mechanical and ModelingDevelopment of Metal Hollow Sphere Sheet and its Formability and Mechanical PropertyNumerical Investigation of the Incremental Tube Forming ProcessGroove Filling Characteristics and Strength of Form-Fit Joints Produced by Die-Less HydroformingTopology Optimization of a Car Seat FrameModeling Thixoforming Process Using the eXtended Finite Element Method and the Arbitrary Lagrangian Eulerian FormulationTowards Online Control of Forming Processes Involving Residual Stresses: Defining Multi-Parametric Computational vademecumsToward a Real Time Control of Toolpath in Milling ProcessesDirect 3D Simulation of Powder Sintering by Surface and Volume Diffusion3D Modelling of Doped and Multi-Materials during Sintering of a Granular PackingImprovement on CAE Model Considering Surface Deformation of Tools in Contact with Blank Sheet for Accurate Torsional Springback Prediction in High Strength Steel Part FormingElectromagnetic Sheet Bulging: Analysis of Process Parameters by FE SimulationsAn Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Heavy Steel Plates during Accelerated CoolingCoextrusion and Mechanical Characterization of Aluminum Coated Mg-ProfilesVelocity Field in Direct, Indirect and Friction Assisted Extrusion of AlModeling Approach for the Determination of Material Flow and Welding Conditions in Porthole Die Extrusion with Gas Pocket FormationDesign Criteria in Numerical Design of Profile Extrusion DiesComposite Extrusion of Thin Aluminum Profiles with High Reinforcing VolumeSurface Evolution and Lubricant Distribution in Deep DrawingNovel Experimental Set-Up to Investigate the Wear of Coatings for Sheet Metal Forming ToolsDevelopment of Upsetting-Extrusion Type Tribometer for Evaluating Lubrication Coating Performance in Cold ForgingStudy of Morphology Wear Model of Moulds from Alloys of Aluminium EN AW-6082 in Injection ProcessNumerical Simulations of Asperity Crushing Using Boundary Conditions Encountered in Cold-RollingSclero-Topometry in Superficial Wear and Metal Processing of Ductile Cast Iron at Boundary Lubrication. Application to Tribological Valorization of Waste OilIncremental ECAP with Converging BilletsRoute Effects in I-ECAP of AZ31B Magnesium AlloyEnhancing Mechanical Properties and Formability of AISI 301LN Stainless Steel Sheet by Local Laser Heat TreatmentMicrostructuring by a Combination of Micro Impact Extrusion and Shear Displacement FormingAccuracy of Transferring Microparts in a Multi Stage FormerSequential Optimization of Strip Bending Process Using Multiquadric Radial Basis Function Surrogate ModelsSurrogate POD Models for Parametrized Sheet Metal Forming ApplicationsDamage Material Parameters Identification Using the ANN-GA Method and the Bulge TestOn the Development and Computational Implementation of Complex Constitutive Models and Parameters? Identification ProceduresDevelopment of an Inverse Routine to Predict Residual Stresses in the Material Based on a Bending TestA Two-Pronged Approach for the Assessment of Springback Variability for Sheet Metal Forming ApplicationsApplication of Tube Hydroforming in Square Cross-Section Die for Inverse Identification Method ValidationMicrostructure and Mechanical Properties of Friction Stir Welded AA6060-T6 TubesEffect of Welding Parameters on AA8090 Al-Li Alloy FSW T-JointsEffect of Surface Pretreatment on the Performance of Adhesive-Bonded JointsStudy of the Forces Generated during Nonlinear Friction Stir Welding: Circular TrajectoryCladding of Advanced Al Alloys Employing Friction Stir WeldingA Numerical and Experimental Analysis of Microstructural Aspects in AA2024-T3 Friction Stir WeldingInfluence of Parameters in a Hybrid Joints (SPR/Bonded) GFRP-AluminumNumerical Study of a Crimped Assembly Mechanical StrengthNumerical and Experimental Analysis of Self Piercing Riveting Process with Carbon Fiber-Reinforced Plastic and Aluminium SheetsSimilar and Dissimilar FSWed Joints in Lightweight Alloys: Heating Distribution Assessment and IR Thermography Monitoring for On-Line Quality ControlFSW of AA 2139 Plates: Influence of the Temper State on the Mechanical PropertiesThe Friction Stir Welding of Cylindrical ComponentsEffect of Process Parameters on the Joint Integrity in Friction Stir Welding of Ti-6Al-4V Lap JointsPartial Joining of Blanks with Electrochemical Support (ECUF)Research into the Flow Stress of Al-Mg-Si Alloy (AD-35) during the Abrupt Change of the Strain Rate at Elevated TemperaturesA Finite Element Based Approach for the Accurate Determination of the Shear Behaviour of Textiles with the Picture-Frame Shear TestCharacterization and Modeling of the Elastic Behavior of a XC68 Grade Steel Used at High Strain Rates and High TemperaturesGrowth and Closure of Voids in Metals at Negative Stress TriaxialitiesAnalysis of Metallic Materials Behavior during Severe Loadings Using a FE Modeling of the SHPB Test Based on a Numerical Calibration of Elastic Strains with Respect to the Raw Measurements and on the Inverse Analysis PrincipleOn the Selection of Active Slip Systems in Rate Independent Crystal PlasticityPolycrystalline Model Predictions of Flow Stress and Textural Hardening during Monotonic DeformationPhysically-Motivated Elasto-Visco-Plastic Model for the Large Strain-Rate Behavior of SteelsOn the Study of Distinct Algorithmic Strategies in the Implementation of Advanced Anisotropic Models with Mixed HardeningAsymmetric Yield Locus Evolution for HCP Materials: A Continuum Constitutive Modeling ApproachCrystal Plasticity Modeling of the Through-Thickness Texture Heterogeneity in Heavily Rolled AluminumHow to Combine the Parameters of the Yield Criteria and the Hardening LawComparison of Different Constitutive Models in Sheet Metal FormingActivation Energy for Hot Deformation of 15-5 PH Stainless SteelHot Deformation Studies of a Low Carbon Steel Containing VModelling of Polishing Tools for High Spatial Frequency Defect Correction on Aspherical SurfacesA Plasticity Induced Anisotropic Damage Model for Sheet Forming ProcessesDeformation Scenarios of Combined Stretching and Bending in Complex Shaped Deep Drawing PartsApplication of Response Surface Analysis and Genetic Algorithm for the Optimization of Single Point Incremental Forming ProcessForming of Automotive Aluminum Body Panels by Sheet HydroformingForce Prediction for Correction of Robot Tool Path in Single Point Incremental FormingFinite Element and Experimental Investigation of the Multipoint Flexible HydroformingFlow Characteristics of New Steel Grades Dedicated to Hot StampingInfluence of Tool Geometry Variation on the Punch Force in Micro Deep DrawingEvaluating Material Constitutive Equations for the Simulation of Incremental Sheet Forming Applied to Form Thermoplastic MaterialsReduction of Springback in Hat Channel with High-Strength Steel Sheetby Stroke Returning Deep DrawingInvestigation on Effect of Slide Motion Control on Stamping of High Strength Steel SheetsMaterial Property Evolution in Incremental Sheet Forming - A Review and ComparisonThe Influence of Toolpath Strategy on Geometric Accuracy in Incremental FormingIncremental Sheet Metal Forming with Direct Resistance Heating Using Two Moving ToolsFriction-Spinning ? an Innovative Incremental Forming Process for the Manufacturing of Functional Graded PartsComparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental ResultsControl System Algorithm for the Prediction of Sprinback in Air BendingSingle Point Incremental Forming of a Medical ImplantAn Investigation of Factors that Influence the Overall Magnitude of Cross-Sectional Distortions in Draw BendingExperimental and Numerical Studies of Edge Rounding Process in HSLA Steels Sheet MetalTool Path Generation for Single Point Incremental Forming Using Intelligent Sequencing and Multi-Step Mesh Morphing TechniquesBrass 70/30 and Incremental Sheet Forming ProcessA Study on the Nose Radius Influence in Press Brake Bending Operations by Finite Element AnalysisOn the Geometric Accuracy in Shallow Sloped Parts in Single Point Incremental FormingDetermination of Tool Motions in Stretch Forming Process for Aerospace Applications by Using Finite Element MethodManufacturing of Geared Sheet Metal Components Using Flexible Rolled Tailored BlanksDevelopment of a Friction Law Respecting Plastic Surface SmoothingNovel Five-Axis Forming Press for the Incremental Sheet-Bulk Metal FormingInfluence of Superimposing of Oscillation on Sheet-Bulk Metal FormingInnovative Tools to Improve Incremental Bulk Forming ProcessesExperimental Determination of Heat Transfer Coefficients for Forming of Stainless Steel Sheets Considering Process Conditions and Deep-Drawing FilmEstimation of the Heat Transfer Conditions in a die Radius during Hot StampingSimulations of an Infrared Composite Curing ProcessSimulation of IR Heating for Composite StampingInfluence of the Impact Angle and the Gravity Direction on Heat Transfer during the Cooling of a Cylinder by a Free Planar Subcooled Impinging JetInduction Heat Treatment for an Automotive Crankshaft: Large Scale Modelling with Moving InductorsTemperature and Displacement Fields Measurements to Assist the Numerical Simulation of the Welding-Brazing Process of Thin Automotive PartsCharacterization of Roll Bite Heat Transfers in Hot Steel Strip Rolling and their Influence on Roll Thermal Fatigue DegradationPrediction of Tensile Properties of Injection Moulding Flax Fibre Reinforced Polypropylene from Morphology AnalysisDigital Image Correlation for On-Line Wall Thickness Measurements in Thick Gauge ThermoformingAn Original Model Experiment Designed for High-Pressure Crystallization with a Polymer Processing ConcernNumerical Simulation of Plug-Assisted Thermoforming Process: Application to PolystyreneUniform Cooling and Part Warpage Reduction in Injection Molding Thanks to the Design of an Effective Cooling SystemA New PvT Device for the Thermoplastics Characterization in Extreme Thermal ConditionsStructure Development of Biodegradable Polymers: Crystallization of PLAThermo-Kinetic Analysis of Liquid Silicone RubberMulti Criteria Adaptive Meshing for Polymers Processing in Rem3D?Evaluation Method for Stretch Blow Moulding Simulations with Process-Oriented ExperimentsMulti-Response Parameters Optimisation for Energy-Efficient Injection Moulding Process via Dynamic Shainin DOE MethodIn-Line Visualisation of Polymer Plastication in an Injection Moulding ScrewNumerical Analysis of Non-Isothermal Viscoelastic Materials for Thermoforming of Polymer FilmsThermal Simulation of Polymer Crystallization during Post-FillingMorphology-Crystallinity Relationship in PLA-PHBV Blends Prepared via ExtrusionTransversely Isotropic Hyperelastic Constitutive Models for Plastic Thermoforming SimulationAnalysis and Simulation of the Free-Stretch-Blow Process of PETRole of the Interphase in the Interfacial Flow Stability in Coextrusion of Compatible Multilayered PolymersCompounding and Melt Strengthening of Poly(Lactic Acid): Shear and Elongation Rheological Investigations for Forming ProcessStructure-Properties Relationships in Processed Poly(ethylene terephthalate)Physical Modelling and Identification of Polymer Viscoelastic Behaviour above Glass Transition Temperature and Application to the Numerical Simulation of the Hot Embossing ProcessNumerical and Experimental Study of Tube Hydroforming for Aerospace ApplicationsAn Experimental Study on the Friction Stir Processing Process of Aluminium AlloyPrimary Research on Jet ECM Processing of Difficult to Cut MaterialsMachining of External Cylindrical Surfaces on a RAM Electrical Discharge MachineMaterial Efficient Manufacturing of Three-Dimensional Components Using Metal KnittingRapid Manufacturing of Shaped Die and Draw Punch Tools for PressesInfluence of Process Parameters on Surface Hardening in Hammer Peening and Deep RollingInvestigation of Residual Stresses Induced during the Selective Laser Melting ProcessTi-6Al-4V Cutting by 100W Fibre Laser in Both CW and Modulated RegimeExperimental Investigation on Dry Electrical Discharge DrillingSpring Back of Curved Flanges of Rubber Formed Aluminum PartsInfluence of Steaming and Boiling at 180 ?C Plus on the Injectability of Bamboo PowderNumerical Simulation of Laser Bending of Aluminum FoamsNovel Aerospace Architectures Made Possible by Forming SimulationPress-Shaving Characteristics of Ultrahigh-Strength Steel SheetsEffect of Process Parameters on Surface Roughness in Hammer Peening and Deep RollingA Roll Caster to Cast Clad StripModelling and State Estimation in Pulsed ECM with Variable Electrolyte ConductivityElectrical Discharge Machining of Alumina-Zirconia-TiC Composites with Varying Zirconia ContentDPSS Nd:YAG Laser Precission Machining of Monocrystalline SapphireForming of Shape Memory Composite StructuresExperimental Evaluation of Innovative Tools for Ti-6Al-4V TurningExperimental Investigation on the Cutting Heat Distribution with Different Coating Structures InsertsExperimental Study of tool Wear Mechanisms in Conventional and High Pressure Coolant Assisted Machining of Titanium Alloy Ti17Cutting Edge and its Influence on the Fatigue Life of High Strength CrMn-Austenitic Stainless SteelEffect of the Process Parameters on the Machinability Characteristics of a CoCrMo AlloyNumerical Simulation of Machining Operations on Flexible PartsA Study of the BTA Deep Drilling Process through a Quantitative and Qualitative Analysis of the Chip Formation ProcessInvestigation of the Impact of Orthogonal Cutting Processes on Nanocrystalline Surface Layer GenerationImplementation of Advanced Frictional Laws for Modelling of High Speed MachiningAnalysis of Machining Operations of a Femoral Prosthesis Using CAM ApplicationsAn Experimental Study of Drilling Parameters Effect on Composite Carbon/Epoxy DamageThermo Mechanical Loads in Ti-6Al-4V Machining3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy Using Modified Johnson-Cook Material ModelPotential of Modern Lubricoolant Strategies on Cutting PerformanceAn Error Model in Micro Dimple MillingAir Jet Assisted Machining of Inconel 718 with Whisker Reinforced Ceramic ToolMetallurgical Aspects of Material Behaviour in Cutting of AISI 1045The Effects of Cutting Conditions on Surface Integrity in Machining Inconel 718 AlloyInverse Identification of CDM Model Parameters for DP1000 Steel Sheets Using a Hybrid Experimental-Numerical Methodology Spanning Various Stress Triaxiality RatiosCalibration of Material Parameters of Anisotropic Yield Criterion with Conventional Tests and Biaxial TestA FEM-DBEM Investigation of the Influence of Process Parameters on Crack Growth in Aluminum Friction Stir Welded Butt JointsThe Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind TurbineA Generic Methodology to Improve the Control of Forging Process ParametersOpen Die Forging of Large Shafts with Defects ? Physical and Numerical ModellingShape Optimization of the Conventional Simple Shear SpecimenUtilizing Multiple Objectives for the Optimization of the Pultrusion Process Based on a Thermo-Chemical SimulationIntegrated Design of Wing Panel Manufacture ProcessesIntegrity Evaluation of Steel Flanges Joined with Metallic GasketsDevelopment of an Optimized Loading Path for Material Parameters IdentificationNumerical Optimization of Selective Superplastic Forming of Friction Stir Processed AZ31 Mg AlloyCAD/CAM Strategies for a Parallel Kinematics SPIF MachineEffect of Moisture on the Behaviour of an Extruded Clay PasteIntegrated Design and Numerical Simulation of Stiffened Panels Including Friction Stir Welding EffectsDevelopment of Adapted Material Testing for Cold Pilgering Process of ODS TubesStudy of Formability of Sandwich Shells with Metal Foam CoresSensitivity Analysis of Process Parameters in the Drawing and Ironing ProcessesEaring Prediction in Drawing and Ironing Processes Using an Advanced Yield CriterionApplying Nagata Patches in the Description of Smooth Tool Surfaces Used in Sheet Metal Forming SimulationsAnalysis of Incremental Sheet Forming Parameters and Tools Aimed at Rapid PrototypingExperimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending ConditionsThe Influence of Cold Forming Conception on the Springback MagnitudeImproving Surface Based Clamping Simulations by Measuring the Position of Active Surfaces during the Clamping ProcessComparison of Hyper- and Hypoelastic-Based Formulations of Elastoplasticity with Applications to Metal FormingPrediction of Springback in Unconstrained Bending by a Model for Evolving Elastic and Plastic AnisotropyMaterial Modeling and Numerical Analysis of the Heat Treatment in High Carbon Steels-Application to Ring RollingA Micro-Scale Model for Fiber Tow Characterization under Nondeterministic Assumption: Longitudinal and Transverse PermeabilityTowards Fracture Prediction in Single Point Incremental FormingSimulation of Electromagnetic Forming of a Cross-Shaped Cup by Means of a Viscoplasticity Model Coupled with Damage at Finite StrainsMicromechanical Modeling of Damage and Failure in Dual Phase SteelsInfluence of the Number of Tensile/Compression Cycles on the Fitting of a Mixed Hardening Material Model: Roll Levelling Process Case StudyMulti-Scale Modeling of Microstructure Evolution Induced Anisotropy in MetalsTest Procedures and Simulation Model Calibration Strategies for Nonlinear Stiffness Behavior of Joints in Large-Scale StructuresNumerical Implementation and Finite Element Analysis of Anisotropic Hyperelastic Biomaterials - Influence of Fibers OrientationNumerical Modeling and Digital Image Correlation Strain Measurements of Coated Metal Sheets Submitted to Large Bending DeformationModelling of Damage in Blanking ProcessesInfluence of Anisotropic Yield Functions on Parameters of Yoshida-Uemori ModelValidation of the Computer Simulation Process Applied to the Incremental Forming Process for the Evaluation of Strain PathsOptimization of the Heat Treatment Layout and Blank Outline of THTBAn Efficient Knowledge Based System for the Prediction of the Technical Feasibility of Sheet Metal Forming ProcessesDevelopment of a Damage Prediction System for Bending and Cutting of High Strength SteelsMetamodeling Based on the Fusion of FEM Simulations Results and Experimental DataDramatic Speed-Up in FEM Simulations of Various Incremental Forming Processes Thanks to Multi-Mesh Implementation in Forge?Deformations in Idealized 2D Extrusion Welding
