Sonstiges, Englisch, Band Volume 371, 850 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 371, 850 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-516-1
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 177 papers are grouped as follows:
Chapter 1: Advanced Machining and Surface Engineering, Assembling Technologies;
Chapter 2: Forming Technologies;
Chapter 3: Non-Conventional Technologies in Manufacture and Industry, Welding Technologies;
Chapter 4: Advanced Materials and Construction Technologies;
Chapter 5: Flexible Manufacturing, Automation and Robotics in Technological Processes;
Chapter 6: CAD/CAM/CAE/CAx Technologies, Manufacturing Optimization;
Chapter 7: Mechanical and Manufacturing Equipment, Devices and Instrumentation, Design and Analysis;
Chapter 8: Innovation, Creativity, Learning and Education in Engineering;
Chapter 9: Industrial and Product Management, Quality and Evaluation.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Structural and Technology Support Quality Improvement of Gear CouplingIncrease of Firmness of Milling Cutters with Variable Cutting Velocities along the Length of Teeth Cutting EdgesOptimization of the Tool Life and the Cutting Speed in Terms of Productivity at Drilling of the Stainless Steel 10TiMoNiCr175Mathematical Model for Economic Optimization of the Tool Life and the Cutting Speed at Drilling of the Stainless Steel X6CrNiTi18-10Intensification of Finish Turning of Stainless Steels with the Use of Technological Cutting FluidsThe Influence of the Lubrication Method and the Cutting Regime on the Surface Roughness when Milling 7175 Aluminum AlloyContribution at the Calculation and Variation in Time of the Surface Roughness Produced by Turning ProcessStudy of the Uncut Chip in 5 Axes Ball Nose End Milling for the Third Quadrant of the Tool InclinationPerformance Analysis of a Layout of an Assembly Line Supplied Based on Stock or SynchronousExperimental Design Methodology in Ball End Milling of C45 Material by Using Tool Tilt Angle - Analysis and Estimation of Surface Roughness VariationContributions on the Influence of the Cutting Parameters and Constructive Geometrical Parameters of the Tool on the Precision of the Worm Gears Manufactured Using Whirling Thread CuttingInfluence of the Temperature and Mechanical Stresses Generated by Milling Process in Machined Part Surfaces on their AccuracyMathematical Modeling of Thermocurrent Parameters for Roughness Assessment in TurningDesign of an Automatic Tool Changer System for Milling Machining CentersV Prism Special for Centering DevicesTechnological Failures Research at Aluminum Parts Processing on Automatic LathesComputer Aided Measurement of Elastic Deformations of a Work Piece in the Turning ProcessCooling Capability of Cutting Fluids in GrindingBasic Research for the UV Fixed Abrasive Lapping PlateThe Study of Elastic Strains of Parts from the Grinding Technological SystemA Comparison between the Wear of the Ball Nose End Mill Generated in 4 Axes Milling and in 5 Axes MillingExperimental Researches upon Changes of a Pipe's Roughness after HydroformationFunctional Modeling of an Assembly Line Supplied in SynchronousHigh Precision Rotary Table Used on Milling Machining CentresSurface Integrity of Ti6Al4V Alloy under Dry Sliding ConditionsDetermination of Technological Forces in the Incremental Forming ProcessApplying the Networks Division Method for Studying the State of Deformation of Semi-Finished Sheet Submitted to Technological Cutting OperationsInfluence of the Blankholder Force on the Accuracy of the Rectangular Drawn Parts Made from Steel SheetsThe Residual Stress State Generated by Single Point Incremental Forming of Aluminum Metal SheetsInfluence of the Clearances in the Stamping Device upon the Burrs Resulted on the Stamped Bearing Cages WindowsSimulation of the Pressing Process with Combined Forces by Using ABAQUS SoftwareInfluence of the Thickness Value on the Mechanical and Formability Properties of the CuZn37 Thin Sheet MetalExperimental Researches on the Limit Angle of Conical Parts Manufactured by Single Stage Incremental Forming on CNC LathesDrawing Study of Sheet Bimetallic Brazed PartsBlank Shape Optimization in Deep Drawing with Combined RestraintMethods to Increase the Rigidity of the C-Frame of a PressDimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat ProcessesDimensional Analysis of Electro-Separation Kinetics of Particles from Dielectric LiquidsRapid Manufacturing of Microwave Circuits on Low-Cost Substrates Using Laser MachiningExperimental Research on Quality Assessment of Ultrasonic Cleaning ProcessEconomic Efficiency of Using Rapid Prototyping TechnologyAspects of Finite Element Analysis of Microdrilling by Ultrasonically Aided EDM and Related Knowledge ManagementCustomer Matrix with Different Time Horizons Applied to Electrodischarge MachinesSpecific Aspects on Modelling and Simulation of the Synchronized Ultrasonic Assistance of the Electro-Discharge Machining ProcessPhotogrammetric Scanning Technique and Rapid Prototyping Used for Prostheses and Ortheses FabricationEnvironmental Attributes of EDM ProcessInfluence of the Distance between the Cutting Head and Working Sample on the Geometric Precision in Water Jet Abrasive Cutting ProcessHigh Pressure Water Jet Cutting of the Al 6061 T651 Aluminum AlloyIndustrial Parts for Investment Casting Built on the Rapid Prototyping SystemsAspects Regarding the Technologies on Wire EDM CNC MachinesModeling by Finite Element Method of Thermal Field when Coating with Stellite Welding of Valvetype PartsResearches about Mechanical Characteristics of some Steels Resistance Spot WeldedThe Influence of the Diffusion on Adherence of the 60T Deposits Obtained by Thermal Spraying in Electric ArcInvestigation Concerning Maximal Forming Depth of Tailor Welded Blanks Made from same Material but Different Thickness RatiosResearch on Producing Complex Metal Parts with Lattice Structure by Selective Laser MeltingSome Aspects Regarding Micro-Scale EDM Drilling ProcessMachinability Evaluation by Single Electrical DischargeWorkpiece Clamping at Laser Beam MachiningFormation of the Optimal Machining Process Based on the Analysis of Design and Technological Dimension RelationsDiminishing Shape Errors at Electrical Discharge Machining of External Cylindrical SurfacesComparative Analysis of the Quality of Parts Made by an Aluminum Alloy Processed by Unconventional Cutting MethodsDirect Moulding of Rubber Granules and Powders from Tyre RecyclingDrying Process Modelling for Heavy Clay Products Using a New Thin Layer Drying ModelExperimental and Mathematical Considerations on Roughness Resulting from "ATSi12CuMgNi" Turning Alloys Using Poly-Crystalline Diamond ToolsSpring-Back of Pre-Strained High Strength Steel StripesStudies Concerning the Corrosion Behaviour of the Cast Stainless Steel Used for Chemical IndustryStudies Concerning Variation of the Friction Coefficient in Case of Polymeric Composite Materials Reinforced with Carbon FibersExperimental Studies Regarding Mechanical Behaviour of Textile Reinforcements Laminated Composite MaterialsThe Corrosion Resistance of NiTi-Active Element before and after Thermo-Mechanical SolicitationObject Oriented Finite Element Analysis on Microstructure for W1.8507Researches Regarding Ti/W/TiC Triple Layers Deposition on the Ferritic-Pearlitic Cast Iron Support, Obtained by Electro-Spark Deposition MethodPreliminary Results of Copper Based Shape Memory Alloys Analyze Used for MEMS ApplicationsCorrection to the Wills-Harrison Approach: Influence on the First Minimum of the Effective Pair InteractionResearches on Mechanical Proprieties of Wooden Materials Used in Furnishings ProductionControlled Properties of the Thin Films of Ni0.5Zn0.5Fe2O4- BaTiO3 Ferrite-Ferroelectric Nanocomposites - Simulational StudySimulation Determination of the Electromagnetic Parameters for the CdCr2S4 Multiferroic Relaxor in GHz RangeResearch Concerning the Optimum Extrusion Temperature for Reinforced PolyamideAutomated Stand for Non-Destructive Testing Evaluation of Metal ProductsThe Influence of Kinematic Joints Clearances on the Positioning Accuracy of 3DOF Delta Parallel RobotsPoly-Articulated System with Spatial PositioningRobot-Forming - An Incremental Forming Process Using an Industrial Robot by Means of DELMIA Software PackageTransmission Ratio Optimization of Electric Driven Palletizing MechanismThe Automatic Configuration Method of Modular Structures Composing Multi-Axis HeadsApplication of Tree Graph Method for Reducing the Total Time of Tool Changing in Milling and Boring Machine ToolsNeck Design Solution Adopted in the Development of a New Social RobotAdvanced Integrated Design Method for Fatigue Assessment of Large Elastic Ship StructuresFEA Study on the Elastic Deformation Process of a Simple Bimetal BeamHarmonic Gear Modeled in SolidWorksCAD and CAE Analysis of Devices Connection Cable, DLC-1, 2 and 3Alternative Method for Segmenting Digitized Data in Reverse EngineeringConverting Point Cloud to Revolved SolidsCustomized Software Tools Integrated in Reverse Engineering Process of Rectangular Parts with HolesEstimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element MethodConstructing 3D Surfaces from Random Sets of Points by Means of Level CurvesIntelligent Management of Dies and Molds CAD ProjectsGraphical Representation of Solids - An Important Issue in Teaching Technical DrawingAbout CAD Activities Effectiveness and Efficiency as Instruments for Sustainable Product Development3D Parametric Modeling for Complex Parts GenerationModeling of Stress in Drills with Curved Cutting EdgesDesigning an Innovative Face-Milling Cutter3D Measuring of Complex Automotive Parts by Multiple Laser ScanningStudy of Cooling Parameters Using Fluid Jet in Milling Process SimulationVirtual Simulation of Plastic Injection Technology for Medical DevicesStudy of Flow Font Advancement during Filling Stage of a Spiral MoldStudies about Movement Biofidelity of a Dummy Neck Used in an Impact Testing DeviceParts in CATIA Based on Reverse Engineering TechniqueModeling, Simulation and Optimization of a Human Knee Orthotic DeviceAnkle Foot Orthoses with Wire InsertionTheoretical-Applicative Research on Design and Implementation of a Special DynamometerDimensional Stability Analysis of Unconventional Treated Steel BearingsNumerical Analysis of Load Carrying Capacity in the Contact between High-Order SurfacesA Numerical Study of the Partial Slip Elliptical Contact under Fretting ConditionsThe Influence of the Operating Conditions on the Lubrication Regimes of Ball ScrewsAssessment Procedure of Technological Consumption in the Natural Gas Distribution SystemsA Study of an Ion-Drag Pump CharacteristicsInfluence of Microtube Heating Geometry on Behavior of an Alumina Nanofluid at Low Reynolds NumbersStudy of Micro Hydropower Plant Operating in Gravitational Vortex Flow ModeThe Mathematical Model for Studying Bearing Reliability Unconventional TreatedMeasuring System Analysis of the Video Equipments for Quality Measurements and Quality Control in the Automotive IndustryMathematical Model and Algorithm to Optimize the Construction of Adjustable Multi-Axis HeadsVibration Analysis Methods in Bearing Damage DetectionSystem for Compensating the Rigidity of the Hydrostatic Guideways of the Column Saddle Subassembly of the Boring and Milling MachinesDevice for Supplying the Hydrostatic Pockets with Compensation of the Fluid TemperatureResearches upon the Maintenance of the Railway Wagons Brake SystemAspects of Mathematical Modelling of Heat and Mass Exchange at Burning of Droplet of Water Fuel Oil EmulsionModeling of Railway Vehicles for Virtual Homologation from Dynamic Behavior PerspectiveStructural Analysis of a Flange Coupling without ClearanceElectrical Elements in Reduction of Mechanical VibrationsDesigning a Specialized Devices for Correction of the Axis Deviation at the Human LegImproving Functional Parameters for Hydro-Mechanical Systems from Treatment Station of WaterDesign and Manufacturing of a Low Head Banki TurbineOptimal Pump Scheduling to Reduce the Operating CostsHeat Transfer Modeling for a Plate Heat Exchanger used in Solar Power SystemsIndustrial Rollers in PUR Made for SlaughterhousesDetermining the Calibration Life of Measuring Devices by Means of Parameter Deviation FunctionResearch on Accidental Defects to Bearings of Mining EquipmentInfluence of Tool Clearance Values on the Quality of the Small Drawn PartsInfluence of the Blank Initial State on the Quality of the Small Drawn PartsCrashing Behaviour Analysis of TWB Thin-Walled Structures with Various Cross-SectionsProcedure and Equipment for Circularity Test of Inner Section of Bent TubesResearch on Improving the Assessment Process of Students' Knowledge in the Field of Materials ProcessingManagement and Assessment of Curricula in Technical Higher EducationProject-Based Learning in Higher EducationThe Importance of Teaching GIS in EngineeringImproving Teaching Staff Lifelong Learning Using Fuzzy Algorithms"Mechatronics Galaxy" a New Concept for Developing Education in EngineeringThe Role of Internship in Transversal Competence Development of Industrial Engineering GraduatesCreative Teaching Methods for Educating EngineersMachine Learning and Creative Methods Used to Classify Customers in a CRM SystemsAdvanced Quality Planning of Manufacturing Products - APQPSafety Evaluation of the Pipelines Systems for Petroleum ProductsOrganization of Production Processes through the Multi-Service Method by Performing some Identical Operations of the same Duration and StructureOptimizing the Thermal Physiological Comfort by Introducing Peltier Cells in Simulated ConditionsSystem for the Management of Raw Materials Based on RFID TechnologyAdvanced Product Quality Planning Reference Model in Automotive IndustryA Point of View on Functional Approaches Used in Product DesignContributions to Ranking an Ergonomic Workstation, Considering the Human Effort and the Microclimate Parameters, Using Neural NetworksAspects of Quality Assurance in Glass Bricks Manufacturing ProcessImprovement of Process Failure Mode and Effects Analysis Using Fuzzy LogicImproving the Company Performance by Using Energy Audit MethodApplication of Fuzzy Logic in Design Failure Mode and Effects AnalysisImproving Maintenance Activities of Machine ToolsIntangible Assets Identification and Valuation in a CompanyUse of Ontological Classes in the Exploration of User NeedsInnovative Development of One-Off and Small Series ProductsPlanned Obsolescence and the Product LifecyclePLM Innovation Matrix for a Complex Product Development ProcessIntegrated Product Development Using Different Collaborative Tools in a PLM Multisite PlatformUsing a Systematic Innovative Approach ? Acting/Support Matrix to Develop a ProductBroadening the Use of Product Development Ontology for One-Off ProductsMethod for Determining the Gear Wheels ProfileThe Role of the Eco-Requirements in the Sustainable Product Development Based on the Axiomatic Design PrinciplesConceptual Research Model of Factors that Influence Environmental Knowledge Management at Organizational LevelDesigning Peculiarities and Classification of Compositional Technologies in Mechanical EngineeringHorizontal versus Vertical Heat Distribution in Multi-Storey BuildingsA Conceptual Model of Product DesignAn Approaching on Fuzzy Logic Application for Typical Parts Manufacturing
