Buch, Englisch, 676 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-03835-484-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Foreword, Committees and Sponsors
Chapter 1: Raw Material
Evaluation of the Industrial Raw Material Used for Ceramic Production in Sa~o Jose´ de Uba´, State of Rio de Janeiro, Brazil
Characterization of a Clay Body Used for Red Ceramics in Sa~o Sebastia~o, District of Campos dos Goytacazes, State of Rio de Janeiro, Brazil
Performance of Precursor Materials and Fired Ceramics for Structural Blocks
New Route of Utilization of Pegmatites Tailings to Application as a Ceramics Raw Materials
Characterization of Clay Used in Structural Ceramic
Study of Process Variables for Organofilization of the Bentonite Clay from Cubati, Pb
Characterization of Natural Clay Vermiculite, Expanded by Indirect Method for Energy and Microwave
Study of a Typical Soil Used for Concrete Bricks in Miracema, State of Rio de Janeiro, Brazil
Influence of the Heating Rate on the Phase and Microstructural Transformations of Smectite Clays
Study of the Characterization of Smectitic Clays from a Town in the State of Parai´ba
Physico-Mineralogical Characterization: Bentonitic Clays Recently Found in Olivedos, Parai´ba, Brazil
Characterization, Modification and Rheology of Green Clay
Bentonite Clays Characterization in the Town of Sossego – Paraiba State
Chapter 2: Powder Synthesis
Effect of Solvothermal Treatment on Physical Properties of Nickel and Aluminum Based Oxide Powders Synthesized by Coprecipitation
Ceramic Membrane Made of Alumina Synthesized by Pechini Method for Application in Microfiltration Processes
Production of Mullite from Bentonite Clays and Alumina Residue
Influence of Power and Synthesis Time in the Formation of Mullite Obtained by Microwave Heating
Synthesis of the MgAl2O4 Spinel Obtained via Combustion Reaction Using Glycerine from the Biodiesel as a Fuel for Producing Cellular Ceramics
Synthesis and Sulfating of the ZrO2 for Obtaining of a Catalyst in Order to Future Use in Esterification for Biodiesel Production
Synthesis of Mullite by the Pechini Method
Evaluation of the Processing Conditions in the Transesterification for Biodiesel Production Using the Nanomagnetic Catalyst Ni0.5Zn0.5Fe2O4
Synthesis of Magnetic Nanoparticles Ni0.5Zn0.5Fe2O4 and Ni0.2Cu0.3Zn0.5Fe2O4 for Biodiesel Obtaining
Synthesis of the Magnetic Nanoferrites of Spinel Type and Use in Esterification Reaction for Biodiesel Obtaining
Synthesis and Characterization of Pseudoboehmite and Gamma-Alumina
Study of the Evolution of Phase Calcium Aluminate through the Method for Polymeric Precursors C12A7
Chemical Synthesis and Sintering Behaviour of Ca3Al206 Obtained by Polymeric Precursor Method
Sintering of Ca2MgWO6 Ceramic and its Stability Test in Crude Petroleum
High Energy Milling of Alumina Synthesized by Combustion Reaction Using a Vertical Shaft Attritor Mill: Influence of the Milling Time Length
Immobilized Enzyme Gox with Ferrite CoFe2O4 and Hybrid CoFe2O4/APTS
Pure and La3+/Nd3+ Doped SrTiO3 Powders Obtained by Solid State Reaction and Microwave Assisted Hydrothermal Synthesis
Comparison of Different Alumina Powders for Aqueous Tape Casting Process
Chapter 3: Electrical, Electronic and Magnetic Ceramics
Influence on Doping of 0.4 mol of Co in ZnO Aiming their Application in DMS
Dielectric Characterization at High Temperature of Iron Doped Potassium Strontium Niobate Ceramic by Impedance Spectroscopy
ZnO-Nb2O5-TiO2 Dielectric Resonators and Porosity Influence on Dielectric Constant Values
Application of Micromagnetic Models for Barium Ferrite Magnets
Hybrid Films Photoluminescence of Chitosan/ZnAl2O4
Chapter 4: Ceramic Coverings
Mechanical and Microestructural Characterization of AL2O3 - ZrO2 Ceramic Composite Reinforced with Rare Earth Oxides (Y2O3) for Inert Coating of Storage and Transport Systems of Crude Petroleum
Curvature Evolution of Porcelain Tile during Firing
Electrochemical Study of Ceramics Based on Niobium Oxide over Aluminum Alloy AA 3003
The Usage of Ceramics in the Manufacture of the Lining of Temperature Sensors for the Oil Industry
Chapter 5: Structural Ceramics
Mechanical Properties Evaluation of Al2O3-YAG Ceramic Composites
Evaluation of the Thermomechanical Behavior of Metallic Interconnectors Coated with a Film of La0,8Ca0,2CrO3 of Solid Oxide Fuel Cells (SOFC)
Pressureless Sintering of ZrB2 with ß-SiC Addition
Phase Stability - Structural and Microstructural Characterization of Al2O3-TiO2 Ceramic Composites Reinforced with La2O3 Addition
Hot Pressing Sintering of ZrB2 with ß-SiC Addition
Microstructure and Thermal Conductivity of Porous Al2O3-ZrO2 Ceramics
Thermocraking of Sunflower Oil over Acid Vermiculite
The Influence of Dopants in the Grain Size of Alumina - A Review
Chapter 6: Ceramics in Biomedicine
Effect of Sonochemical Technique on the Morphology and Crystallinity of Hydroxyapatite Nanoparticles
Electrochemical Impedance Spectroscopy: Evaluation of Drug Delivery System of Alpha-Tricalcium Phosphate Cement
Aging Behavior of Commercial and Synthesized Dental Y-TZP Ceramics
Evaluation of the Cytotoxicity of NiFe2O4/SiO2 Hybrid Nanoparticles Aiming its Application as Drug Carriers
Production of Hydroxyapatite/Polyhydroxibutirate Based Composites for Biomaterials Applications
Evaluation of Morphology and Roughness of the Surface of a Ceramic Based on Lithium Disilicate, after Conditioning with Acid Hydrofluoric the 5% and 10%
Evaluation of Mechanical Properties of Composite Materials Used in Dentistry Varying the Inorganic Composition
Analysis of Flexural Strength of Ceramics Based on Zirconia Stabilized by Yttria with Ceramic Cover
Phase Stability of 3Y-TSZ Ceramics after Different Surface Treatments
Europium-Doped Hydroxyapatite: Influence of Excitation Wavelength on the Eu3+ Luminescence in the Hydroxyapatite
Sinterization of Alumina and of the Alumina/Zirconia System in Microwave Ovens
Chapter 7: Nanotechnology
Evaluation of Organoclay Addition in Surface Modified Sintered UHMWPE Membranes for Oil Separation
PP/EPDM Blends Compatibilized by Organically Modified Clays
Selective Occupancy of Sites by Rare Earths in K2Nd(1-X)EuxNb5O15 Nanopowders, where X = 0, 0.0025, 0.025, 0.05 and 0.1, Prepared by Modified Polyol Method
Changing of the Spontaneous Polarization in Niobate Nanoparticles Induced by Non Isovalent Doping
Particle Size Analysis of Fe3O4 Nanoparticles Coated by Polyethyleneglycol
Study of the Influence of Eu3+ Ions in the Bandgap of K2NdNb5O15 Nanopowders
New Additive Type Amorphous-Carbon/Zn Modifier of the Thermal Conductivity of Alcohol Fuel
Chapter 8: Composites
Multilayered Ceramic Composites – A Review
Study of Sintering Behavior of Ceramic Composite Al2O3-TiO2 Rare Reinforcing with La2O3 Possible Application as Ceramic Cutting Tools
Evaluation of the Hydrophobicity on Silicon Rubber Coating with Loads of Alumina Trihydrate and Nanosilica for Use in Electrical Insulation Coatings
Iron-Rich Glass-Ceramics Obtained from Mill Scale
Chapter 9: Earthenware
Addition of Ornamental Stone Waste to Improve Distinct Formulations of Clayey Ceramics
Residual Coal Characterization for Addition to Red Clay Ceramics
Improvement of Clay Ceramic Properties by Glass Polishing Sludge Incorporation
Characterization of Precursor Clay Body and Weibull Analysis of the Compressive Strength of Structural Blocks
Characterization of Clayey Soils from Visconde Do Rio Branco for Fired Ceramic Bricks
Assessment of the Technological Properties of High Temperature Fired Clayey Ceramics Incorporated with Glass Waste
Statistical Analysis of Degradation Data of Red Ceramic Pieces Incorporated with Ornamental Stone Waste
Influence of Particle Size in Brick’s Waste Reuse
Microstructural Analysis of Clayey Ceramics Incorporated with Fluorescent Lamp Glass Waste
Mathematical Simulation of Thermal and Moisture Gradients in Ceramic Blocks
Chapter 10: Plaster and Cement
Effect of Superplasticizer Additives for Class Type Cpii E32 Cements
Study of Water Retention in Mortars Produced with Foundry Powder
Effect of Heat Treatment on Properties of Portland Cement Pastes: Determination through Ultra-Microhardness Test
Evaluation of the Addition of a-Al2O3 on the Mechanical and Thermal Properties in Binding Geopolymer
Granite Waste from Diamond Wire Sawing Addition into Concrete for Civil Construction
Concrete with Addition of Hollow Glass Microspheres
Pozzolanic Activity of Wastes from Fired Clay Ceramic Industry for Incorporation into Concrete
Modeling of Two-Dimensional Orthotropic Heat Conduction in Porous Gypsum
Study of the Stabilization/Solidification of Oily Sludge of Oil through of Scanning Electron Microscopy and Diffraction of X-Rays
Chapter 11: Recycling and Environment
Removal of Toxic Substances (Pb2+ and Zn2+) in Water Using Clay as Natural Smectite Bofe Adsorbent
Evaluation of Bentonite Clay Type in the Chocobofe Zinc Adsorption in Finite Bath System
Sodium Ions Uptake by Hydroxyapatite from Bovine Bone
Results of the Leaching, Water Absorption and Mold Release for Concrete Blocks with the Addition of the Concentration Tailings of Iron Ore
Feasibility of Using Clay Ceramic Residue in Substitution of Washed Sand for Concrete Manufacturing
Evaluation of Incorporation of a Leather Waste Powder in Mortars for Construction Industry
Evaluation of Technological Properties of Ceramic Bodies Made of Kaolinite Clay and Steatite
Evaluation of the Presence of Aluminum Sulphate Used in the Generation of WTP Sludge when Incorporated to the Clay
Use of Leather Residue in the Manufacturing of Soil-Cement Bricks
Evaluation of the Potential of Waste from Pulp Production (Grits) in its Use in Mortar: Physical and Chemical Characterization
Assessment of the Addition of Electric Arc Furnace Dust in Hot Metal at Temperature of 1,350 °C
TiO2 Supported in Ceramic Foams Used for Photocatalytic Applications
Evaluation of Incorporation of Special Vitreous Residues in Mass for Porcelain Stoneware: Physical and Mechanical Properties
Preparation of Membrane Zeolite MCM-22 and Evaluation Process Oil/Water Separation
Addition of Paper Sludge Waste into Lime for Mortar Production
