Sonstiges, Englisch, Band Volumes 343-346, 1100 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volumes 343-346, 1100 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03859-869-5
Verlag: Trans Tech Publications
This books reports exciting new research results in the area of bulk metallic glasses and bulk nanocrystalline materials prepared by severe plastic deformation. Other major topics include synthesis and processing of metals, intermetallics and oxides, polymers, nanocomposites and others by different techniques, including mechanosynthesis and mechanochemistry. Also covered are the structural characterization of nanophase materials and the structural evolution caused by mechanical treatment.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Comparative Study from Drop-Tube Experiments and Ab-Initio Calculations of the Nucleation of the s Phase in the Re-W and Re-Ta Systems during Solidification far from EquilibriumA Unified Landau-Ginzburg Model of Undercooling and Superheating of Crystal-Melt TransitionStructural Stability in Nanocrystal ZnSDiffusion in Amorphous Alloys and Grain Boundaries: The Correlation between D0 and QGrain-Size Refinement in Al-Mn-Ce Rapidly-Quenched AlloysElectron Microscopy and Synchrotron Radiation Powder Diffraction Study of Icosahedral Ti-Zr-Ni AlloysExperimental Determination of the Formation Enthalpies of Al-Y and Al-Y-Ni Amorphous AlloysAnomalies of Mechanical and Physical Properties of the Fe83B17 Eutectic Metallic Glass and their Connection with the Peculiarities of Nanoclusterous StructureNonequilibrium Processing of Polymeric Materials by Mechanical AttritionOn the Size Effects in Fullerite NanoparticlesSolid-State Formation of Carbon and Boron Nitride NanotubesMulti-Wall Nanotubes: Stability and PropertiesSymmetry Based Analyses of Optical Activity of Single- and Double-Wall Carbon NanotubesFerromagnetic Bulk Glassy Alloys with Useful Engineering PropertiesStructural and Magnetic Behaviour of the Rapidly Quenched Nd-Fe-Si AlloysEffect of Co and Cu Alloying on Nd-Fe-Al Based Bulk Amorphous AlloysGlass Forming Ability in the Zr-Nb-Ni-Cu-Al Bulk Metallic GlassesEffect of Additive Elements on the Glass Forming Ability and Crystallization of Zr-Ti-Cu-Ni Metallic GlassesThe Effect of Nitride Addition on the Thermal Stability of Mechanically Alloyed Amorphous Zr65Al7.5Cu17.5Ni10 AlloyBulk Amorphous Alloys: Preparation and Properties of (Mg0.98Al0.02)x(Cu0.75Y0.25)100-xThermal Stability and Viscosity of Mg-Based Glasses and CompositesImpurity Diffusion in ZrTiCuNiBe Bulk Metallic GlassesRelation between Diffusion and Decomposition Kinetics in Zr41Ti14Cu12.5Ni10Be22.5 Bulk GlassPressure-Volume Relation of Zr-Ti-Cu-Ni-Be Bulk Metallic GlassCrystallisation of Zr-Based Bulk Metallic Glasses during Fast Heating in a Synchrotron BeamAtomic Force Microscopy Studies on Duplex Microstructures of Nanocrystalline-Amorphous in Zr-Based Metallic GlassCrystallization of Zr41Ti14Cu12Ni10Be23 MeltsCrystallization Behavior and Stability of ZrTiCuNiBe GlassesComparison of the Decomposition and Crystallization Behavior of Zr and Pd Based Bulk Amorphous AlloysFormation of Nanocrystals in Zr-Al-Cu-Ni AlloysEnhanced Plasticity of Bulk Metallic Glasses Containing Ductile Phase Dendrite DispersionsLow Temperature Ductile Shear Failure of Zr41.2Ti13.8Ni10Cu12.5Be22.5 and Cu50Zr35Ti8Hf5Ni2 Bulk Amorphous AlloysHydrogenation and Oxidation of Zr-Based Metallic Glasses, Quasicrystalline or Nanocrystalline AlloysCorrosion Behaviour of Bulk Amorphous and Crystalline Zr55Al10Cu30Ni5 Alloys at Ambient and Elevated TemperatureIdentification of Key Surface Processes for Vapor Deposited Amorphous Metallic Film GrowthProduction of Thin Films of Metastable Materials by Cross-Beam Pulsed Laser DepositionStructural Characterization of Laser Deposited Fe/Al MultilayersStructural Phase Transformation Observed with In-Situ Mechanical Stress Measurement during the Growth of Amorphous Fe100-xZrx FilmsMetastable Phase Formation in Fe-Al Thin Films Cocondensed by Cross-Beam Pulsed Laser DepositionGrain Boundaries and Mechanical Properties of Nanocrystalline Diamond FilmsThermal Stability of Nanostructured Cr3C2-NiCr CoatingsSynthesis and Characterization of Cryomilled SiC Reinforced Al CoatingsDispersion Strengthened Materials Obtained by Mechanical Alloying - An OverviewNon-Monotonic Decomposition in the Immiscible Ag-Cu SystemAl-Ni Intermetallics Produced by Spontaneous Reaction during MillingFormation of the Ordered Phases during Mechanical Alloying of 50Fe - 25Al - 25Si(at.%) MixturesStructural Investigations of the TiC-Fe(Al) Nanocomposite Formed by Mechanical AlloyingFormation of Ni-Al-Ti-C Nanocomposites by Mechanical AlloyingThermal Behavior of Mechanically Alloyed Al3Nb Nanocrystalline PowdersFormation of Nanocrystalline FeAl-NbC and FeAl-VC Composites by Mechanical AlloyingMelting Point Depression and Microstructure in Ball-Milled Nanocrystalline Aluminium PowdersMechanically Induced Disorder in Magnesium FerriteX-Ray Study of the Kinetics of Mechanical AlloyingStructural Investigation of a Mechanically Alloyed Nd40Fe60 PowderCrystallisation of Melt-Spun Al-Fe-Nd-Cu AlloysPrimary Crystallization of Al-Based Metallic GlassesEvaluation of the Volume Fraction Crystallised during Devitrification of Al-Based Amorphous AlloysNucleation Behavior of a-Fe in Amorphous Fe-7Zr-5B-1Au AlloyThe Influence of the Annealing Atmosphere on the Nanocrystallization Behaviour and on the Magnetic and Mechanical Properties of Amorphous FeZrBCu - Base AlloysSynthesis of Metal-Oxide Nanoparticles by Mechanochemical ProcessingMechanosynthesis of a New Tin Sulphide PhaseSynthesis of Al2O3-TiC by Reactive MillingMicrostructure and Properties of Ti-TiN In-Situ Composites Prepared by Reactive Ball Milling of Ti in Ammonia Followed by Hot PressingHydrogen Disproportionation by Reactive Milling and Recombination of Nd2Fe14B and Nd2Co14B AlloysMechanochemical Synthesis in Ti-C, Ti-B, B-C, B-C-Al SystemsMechanochemical Preparation and Characterization of Nanocrystalline Ceramic CompositesThe Combustive Reduction of 2-(2,4-Dichlorophenoxy) Propionic Acid by Mechanochemical MethodsEffect of Reaction Medium on the Mechanochemical Decomposition of ZrH2 and on the Reactivity of Hydride HydrogenReduction of Iron-Oxide by Ball-Milling with Hydrogen Gas FlowChange in the Short Range Order in the Al ? Transition Metal Hydroxides Mixed System by Mechanical StressingA Molecular Orbital Study on the Formation of Hetero-Metalloxane Bonds under Mechanical StressingMechanochemical Synthesis of Niobium HydridesInnovative Processing of Nanostructured Films and Powders using Electrostatic Assisted Aerosol Based Deposition MethodsNanopowder and Nanostructured Film Synthesis in Low Pressure FlamesStudies on Nanocrystalline Ni/Al2O3 Films Formed by Electrolytic DC PlatingProperties of Alumina-Zirconia NanocompositesSynthesis of Si Nanoparticles within Buried Layers of SiOxShift of the Absorption Spectra of Undoped and Rare Earth Doped Nanocrystalline Yttria Prepared by Chemical Vapour SynthesisLow-Cost Nanopowders for Phosphor and Laser Applications by Flame Spray PyrolysisFlame Synthesis of Spherical NanoparticlesSupersonic Cluster Beam Synthesis of Nanostructured MaterialsProduction of Fe-Cu Ultrafine Particles by Plasma Jet MethodSingle Source Precursor-CVD for Nano-Scaled Ceramics and CermetsOn the Development of a Low Temperature, Superplastic Nanocrystalline 5 Mol.% Yttria Stabilised Zirconia: Synthesis, Processing and Mechanical CharacterisationApplication of Pulsed Power and Microwave Techniques for the Production of Nanocrystalline Powders and Ceramic Bulk MaterialsHydrogenation-Disproportionation Reactions in Nd14.01Fe78.91Hf0.08B6.99Hydrogen-Induced Amorphization of SmFe3Synthesis of Nano-Structured Fe/Fe3O4 Complex Particle by Thermal Decomposition of W?stiteStructural Study of Nano-Size Ceramic Particles Fabricated by CavitationPhase Instability of Nanocrystalline Driven AlloysThermodynamic Simulation of Mechanically Alloyed Solid Solution Formation in Fe-Sn SystemThermodynamic Description of the Phase Transformation Mechanism during Mechanical Alloying ProcessThe Formation Sequence of Intermediate Phases in Mechanical Alloying of Binary SystemsComputer Simulation of Mechanoactivation Process in the Planetary Ball Mill: Determination of the Energy Parameters of MillingDiffusion Decomposition of Nanocrystalline Alloys at Generation of Non-Equilibrium Vacancies on Grain BoundariesThe Kinetics of Ball Milling Induced Amorphization in NiNb Intermetallic and Elemental Mixture of the same CompositionHot-Forming of Silicide-Dispersion-Strengthened Titanium Aluminides (SDS-TiAl) with Grain Sizes in the Submicron RangeThermal Stability and Densification of Nanostructured Titanium Carbide and Graphite/nTiC CompositeCharacterization of NiAl Intermetallic Produced by Mechanical Alloying and Consolidated by Spark Plasma SinteringCharacterization of Cu-Co Alloys Produced by Mechanosynthesis and Spark Plasma SinteringX-Ray Analysis of Nanostructural Materials Made by Reactive Ball Milling: The Effect of Wavelength on Signal to Background RatioMicrostructural Characterisation of Amorphous and Nanocrystalline Structures Through Diffraction MethodsInelastic Neutron Scattering Studies of Zr100??Al? Solid SolutionsAtomic Dynamics of Amorphous and Nanocrystalline Ni80P20Radial Distribution Function of Amorphous Silicon Oxycarbide CompoundsIn-Situ X-Ray Crystallite Growth Study on Nanocrystalline FeX-Ray Crystallographic Characterization of Nanocrystalline and Amorphous YNi2B2C SuperconductorsX-Ray Powder Diffraction and M?ssbauer Study of Red Mud Residue from Alumina Production3-D Atom Probe Studies of Some Nanostructured MaterialsMechanically Alloyed Nanocrystalline Cu80Co20 Investigated by AP/FIM and 3DAPMicrostructural Characterisation of the Mechanically Alloyed Cu88Fe12 and Cu72Co28 Compounds and of the Ball Milled Cu80(Fe0.3Co0.7)20 Pseudo-AlloyM?ssbauer and SANS Study of Fe-Powder Mechanically Alloyed with CarbonStructural Stability and High-Temperature Positron Lifetime Study of Mechanically Alloyed Nanocrystalline Pd-ZrStructural and Thermal Studies of HfPd System Prepared by Mechanical AlloyingLocal Structure of Amorphous and Metastable Alloys as seen by Mechanical Hydrogen RelaxationThe Effect of Absorbed Hydrogen on the Chemical Short-Range Order in Zr68Fe32 Metallic GlassDeformation of Structural Superplastics, Nanostructured Materials and Metallic Glasses: A Unified ApproachThe Behavior of Quasicrystal Reinforced Extruded Al Alloys under Tensile Loading at Room and Elevated TemperaturesProduction and Characterization of Nanostructured Ti-Based IntermetallicsSPD Processing and Properties of Metastable Nanostructured AlloysDevelopment of Equilibrium Submicrocrystalline Structure in Superalloy MA754Nanocrystalline Ball Milled fcc-FeRh AlloysBall Milled Amorphous (Fe0.5Cu0.5)85 Zr15 AlloysThermal Decomposition of Mechanically Alloyed (FexCu1-x)93Zr7 (x=0.5, 0.7) Solid SolutionsStructural and Magnetic Investigation of Mechanically Alloyed Fe-M-B (M=Nb, Zr, Hf) PowdersCorrelation between the Microstructure and Enhanced Room Temperature Coercivity in Ball Milled Ferromagnetic - Antiferromagnetic CompositesSuperparamagnetism and Giant Magnetoresistance in Partially Milled and Annealed Fe0.30Cr0.70Magnetic Study of Nanocrystalline Fe67W33 AlloyThermomagnetic Investigation of the Ni-Pd-P GlassesEffect of Annealing in Hydrogen on Composition, Structure and Magnetic Properties of Rapidly Quenched Fe-Co-Si-TM-B RibbonsInfluence of the Grain Size on the Magnetic Properties of Ball Milled Fe90W10Magnetic Properties of Grain Boundaries and Precipitates in Nanocrystalline Ni and Ni-Cu AlloysElectrochemical Characterization of Rapidly-Densified Ni-Mo ElectrodesEnhanced Corrosion Resistance of Amorphous and Nanocrystalline FeNbB AlloysScanning Kelvin Probe Investigations on Highly Distorted MetalsInvestigation of Passive Layer Properties on Nanocrystalline Nickel by Electrochemical Impedance SpectroscopyElectron Transport in Amorphous Al-Y-TM (TM=Cu, Ni, Co, Fe) AlloysMetal Supported Catalysts Prepared by Mechanical Alloying ProcessesMechanically Induced Disordered VOHPO4 x 0.5 H2O Structure and its Behaviour in the Phase Transformation in the Presence of AmmoniaInfluence of the Preparation Conditions of NiZr Rapidly Solidified Catalysts Precursors on the Structural Evolution during the Activation TreatmentHigh Energy Ball Milled Nanocrystalline ZnO VaristorsProduction and Characterization of Mn-Si Thermoelectric MaterialVariation of Superconductivity in Mechanically Alloyed Pseudo-Quaternary Y-Pt/Pd-B-CNanocrystalline Composites for Thermal Spray ApplicationsProduct Engineering of Gas-Born Nano-Sized ParticlesGas Phase Synthesis of Size Selected SnO2 Nanoparticles for Gas Sensor ApplicationsProcessing of Ceramic Powder using High Energy MillingGas Pressure and Temperature Measuring System (GTM) for In-Situ Data Acquisition during Planetary Ball MillingInterfaces in Alumina-Zirconia Ceramics for Ball-Bearing Applications
