Buch, Englisch, 884 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1610 g
Buch, Englisch, 884 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1610 g
ISBN: 978-3-03835-766-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees
Chapter 1: Metals, Alloys and Composite Materials
Influence of Heat Treatment Method on Grain-Refining during Warm Deformation of Medium Carbon Steel
Study of Temperature Field in PECM Based on Multi-Physics Coupling Simulation about Titanium Alloys Blades
A Mesoscopic Mechanics Research on Deformation of 7B04 High Strength Aluminum Alloy
Superplastic Elongation through Deformation Mechanism Transition during High-Temperature Deformation in Thermally Unstable Fine-Grained Aluminum Solid Solution Alloy
The Natural Aging Effect on the Activation Energy of the Precipitation Processes in the Al-Mg-Si Alloy
Principles of Optimal Control in the Synthesis of Composite Materials
Annealing Effect for Cold Rolling 6016 Aluminum Alloy Sheet
The Effect of Lack-of-Fusion Porosity on Fatigue Behavior of Additive Manufactured Titanium Alloy
Experimental Study on Electro-Discharge Machining of Nickel-Based Superalloy
The Effect of Modifying Agents on the Mechanical Properties of Straw Flour/Waste Plastic Composite Materials
Simulation on Temperature Field of Friction Stir Welding of 2A14 Aluminum Alloy Based on Equivalent Film Method
Toughening Mechanism and Mechanical Properties Simulation of Rubber-Toughened Polymers
The Influence of Different Wood Aggregates on the Properties of Geopolymer Composites
Magnetic and Electrical Properties of Iron-Based Soft Magnetic Composites with Silicone Resin Insulation Coating
Fracture Model of ZrO2-Al2O3 Ceramic Composite
Study on Equivalent Viscous Damping of Aeolian Vibration for Transmission Line by AACSR-400 Steel Core Aluminum Alloy Wire
Chapter 2: Materials Testing, Forming and Processing Technology
Positive Effects of High-Temperature Steel Creep Behavior on Continuous Casting Slab
Obtaining and Maintaining of Clean High Vacuum on the Material Outgassing Test System
Study on the Mechanical Property of 20Cr13 Stainless Steel Barrel Processed by Cold Radial Forging
A Brief Discussion about Nickel Aluminum Bronze Propeller Failure Modes and its Repair Methods
Neutron Spectrometer Used for Nondestructive Detection of Materials Deep Stress: Status of the Project
Research on Torsion Beam with High Strength Steel Materials Forming
Method Studied on the Tensile and Compression Strength Prediction of Friction Stir Welding Aircraft Panel
Friction Stir Forming of A5083 Aluminum Alloy Gear-Racks with WC Particles Embedded in Tooth Surface
Measurement of Complex Permittivity of Materials Using a Double-Ridge Waveguide Resonator
The Deduction of Double-Layer Material’s Dielectric Constant in High Q Cavity
Material Testing Based on Cylindrical Cavity
Materials Machining Study of Titanium Alloy Using a High Speed Camera
Study on Electro-Discharge Machining Technology of Superalloy Impeller
A Potential Application of the Mechanical Tensile Strength Test for Indicating Paper Biodegradation
Research and Manufacture of Microwave Material Automatic Measurement System of Slotted Line
Laser High-Speed Impact Composite Forming of Aluminum/Aluminum
Experimental Study on Damage Effect of PELE with New Structure and Composite Material against Multi-Layered Plates
Size Effects on Formability of Copper Foil in Flexible Micro-Bending Process
An Optimization Model on Cutting Parameters of Material Processing for High Productivity
The Friction and Wear Characteristic Comparison of PMMA and MC Nylon as Spreading Device Pad Material in Copper Coil Forming
Attenuation Distribution Broadband Measurement System of Ceramic Pole Attenuator Used for TWT
Evaluation on the Corrosion and Wear Resistance of Welding Zone Welded with Plasma Transferred Arc Welding Method
An Identification Method of Failure Mechanism Consistency for Rubber Materials in Accelerated Aging Testing
Change in Surface Morphology of Si (100) Wafer after Oxidation with Atmospheric-Pressure Plasma
Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser
Hot Deformation Characterization of Mg-Sm-Zn-Zr Alloy Using Artificial Neural Network and 3D Processing Map
Study on Microstructure and Mechanical Properties of Explosive Welding Composite Plate
New Method for Diamond-Like Carbon Deposition on Ceramic Cutting Tools in Vacuum-Arc Plasma
Monitoring and Material Simulation of Automatic-Cooling System for Waterfowl Incubator
Chapter 3: Engineering Materials and Application
The Progress of Advanced Engineering Materials in Acupuncture Needle
Study of Nickel Wick Structure Applied to Loop Heat Pipe with Flat Evaporator
Fracture Analysis of an Aluminum Alloy Gear Pump Housing
Lightweight Research on Aluminum Alloy Material of Rear Axle Differential
Effects of Metal Material Stent Design Parameters on Longitudinal Stent Strength
Design and Numerical Analysis of Leaf Spring Using Composite Materials
The Influence of Arterial Wall Thickness on Stainless Steel Material Stent Expansion in Tapered Arteries
Micro-Strength Analysis of Sand Mold for Casting Based on Bonded-Particle Model
Modeling and Optimization for Lightweight Design of Aluminum Alloy Wheel Hub
Milling of Dielectric Ceramics by Fast Argon Atoms
Optimal Design of Multi-Layer Absorbent Honeycomb Cellular Composite Material Structure
The Low Temperature Liquefaction Characteristic Test of Sulfur Hexafluoride Gas Used in Electrical Equipment
Fracture and Failure Mechanism Analysis of the 45CrNiMoVA Gear
Chapter 4: Behavior and Mechanical Properties of Materials
Effect of in Addition to Zn-5Al Solder on Microstructure and Properties of Solder Joints
The Relationship between the Deformation of Spherical Indentation and Tensile Deformation
Influence of Materials Hardenability Parameters on the Machine Parts Characteristics after Unloading
Shear Bond Strength of Orthodontic Bonding Materials Polymerized by High-Intensity LEDs at Different Intensities and Curing Times
Granular Material (of Commeasurable and Multi-Dimensional Granules) Properties
Analysis of the Properties of Mechanical Materials and Parts Based on ANSYS Software
Stress Intensity Factor of Interface Crack in the Cermet Cladding Material Structure under Steady Mechanical-Thermal Coupled Loads
Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation during Directional Solidification
Investigation on Process and Welded Joint Mechanical Properties of Bainitic Steel Rail Flash Butt Welding
Chapter 5: Nano-, Micro- and Film Materials
The Fabrication of MgB2 Film and Nano-Bridge by EB and FIB
Experimental Verification of Scrub and Impact Resistance of the Epoxy Coatings Filled with the Finely Milled Waste Glass
Extraction of Cellulose Microfibrils from Cassava Pulp
Forming Mechanism of a-Fe2O3 in the Oxide Films on Iron-Bonded Diamond Wheel Surface by ELID Grinding
Resistive Switching in NiO/BiFeO3 Thin Film
Synthesis of Porous Basic Magnesium Carbonate Crystallographic Materials with Flower-Like Structure
Study on Thermal-Shock-Resistance of the Composite Coating of 20 Steel Substrate by Hot Dip Aluminum and Micro-Arc Oxidation
Influence of Cathode Size on Field Emission Properties of a Single Vertical Carbon Nanotube Material
Structural Modification of Polymer Nanocomposites Based on Tetrazole
Influence of Doping Element Crystal Structure on the Microstructure of Cr Films by Magnetron Sputtering
TEM and XRD Analysis of Carbon Nanotubes Synthesised from Flame
Stress Reduction of Solar Cell with Nanostructures on Silicon Chip Surface
Preparation and Characterization of Silicone Oil/UF Resin Microcapsules as Erosion Inhibitor
Improved Out-Coupling Emission of Organic Light-Emitting Diodes by Employing Ag-Thin-Film or Al2O3-Thin-Film Longitudinal Wave Guides
Synthesis and Characterization of Silica Aerogel Materials Doped with TiO2 Powder for Thermal Insulation
Hardware-Technological Features of Layered Surface Composition Made of Shape Memory Materials in a Single Vacuum Cycle
Numerical Simulation Study of Quasi-Static Loading and Dynamic Loading for Micro Bending Forming of Copper Foil
Microwave Absorbing Characteristics of Plasma Sprayed SiC-CNTs/AT13 Absorbing Coating
Effect of Coating Removal by Induction Heating on the Microstructure and Properties of Deck Steel
Optical Properties of Ge23.5Pb20S56.5 Glassy System
Chapter 6: Chemical Materials and Chemical Technologies
The Effect of Ammonium Sulfate on the Sulphate Reducing Bacteria Bio-Derived Material
Chromium (VI) Adsorption Study Using Bio-Adsorbent Material Derived from Tamarind-Seed Testa
Separation of Non-Natural Carboxyl Amino Acid Enantiomers by Capillary Electrophoresis with CM-ß-Cyclodextrins as Chiral Selective Reagent
Effect of K2O Contents on the Releasing of Nutrient Ions from Phosphate Glass System
Biodiesel Production from Used Vegetable Oil Using Ethanol and Sodium Methoxide Catalyst
Investigation on the Chemical and Physical Properties of Vegetable Oil-Based Polyols for their Potential Application as Asphalt Rejuvenators
Effect of STAC on Structure of Biotite when Biotite Transform to Hydrated Ba-Mica
Overview on the Liquid Metal Battery for Grid-Level Large-Scale Energy Storage
Simultaneous Determination of Arsenic, Antimony and Bismuth in Chemical Materials by Inductively Coupled Plasma Optical Emission Spectrometry
Production of Syngas from Controlled Microwave-Assisted Pyrolysis of Crude Glycerol
Photocatalytic Degradation of Humic Acid with Metal-Doped TiO2 under Near-Visible Irradiation
Application of Calcium Methoxide as Solid Base Catalyst for Biodiesel Production from Waste Cooking Oil
Study on the Removal of Hydrogen Sulfide from Biogas Biomaterial Using Water Scrubbing
Exploration 304 Stainless Steel Wire as Novel Sorbent Material for Determination of Polycyclic Aromatic Hydrocarbons in Water
Optimization of Esterification and Transesterification Reactions for Biodiesel Production from Crude Coconut Oil Using RSM Techniques
Hydrogenous Fuel as an Energy Material for Efficient Operation of Tandem System Based on Fuel Cells
Thermodynamic Study on Interfacial Reaction between Blast Furnace Slag and Silicon Carbide
Isolation, Identification, and Characterization of Lambda-Cyhalothrin Pesticide Degrading Bacterium ZC-5
The Effects of Preparation Methods on Iron Structures of Iron-Supported HZSM-5 and their Catalytic Performance for Methanol Dehydration
Investigation of Electrochemical Properties of Elemental Sulfur Dissolved in Alkaline Solution on Rhodium Electrode
Incidence of the Presence of Lead on the Elimination of Humic Substances
Impact of Secondary Phases Content on the Mechanical Properties of Cordierite
Research on the Interaction between Biomaterials of Human Serum and Dibazol by Fluorescence Spectroscopy
Extraction Characteristics of the Alkali and Alkaline Earth Metal Ions in the Washing Solution of Coal with Polymer Material Crown Ether
Microscopic Structure and Adsorption Properties of the Terpenoids-Based Adsorption Material
Effect of Niobium Doping on the Properties of Yttria-Stabilised Zirconia for Solid Electrolyte in Solid Oxide Fuel Cell
Chapter 7: Concrete and Construction Materials
Synthesis of High Performance Polycarboxylate Superplasticizer through Redox Initiation System and its Application in Concrete
Analysis of Building Envelope Materials Retrofitting of Timber Dwellings Based on Energy Efficiency
Granule Morphology of Supplementary Cementitious Materials under Different Cooling Conditions
Effect of Concrete Types and Construction Joints on Concrete Shear Friction Characteristics
The Study on the Application of Crop Straws as the Insulation Materials of Precast Concrete Sandwich Wall
The Domestic Research Situation of Crop Straws as Building Wall Materials and Thermal Insulation Materials
Study on Application of Straw as Landscape Wall Construction Material
Study on Performance of Fiber Reinforced Concrete Composite Beam Structure
Effect of Powder-to-Voids Ratio on Bleeding Process of Fresh Concrete
Study on the Bearing Capacity and Influence Factors of Concrete Columns with Reinforcing Steel Bars in Core
Smart Building Materials of BIM and RFID in LifeCycle Management of Steel Structure
Coating Thickness of Reinforced Concrete Affecting to Cathodic Polarization and Cyclic Voltammogram of Reinforced Steel
A Study on Bacteria Adsorption Technology for Development of Bacteria Based Concrete Coating Materials
LQG Control of Along-Wind Responses of Tall Building Using Composite Tuned Mass Dampers
Research of the Uniaxial Compressive Property of the Concrete Mixed with High-Content Fly Ash in Seawater
Finite Element Analysis on the Concrete Damage of Cross-Formation Perforation upon ANSYS/LS-DYNA
Analysis of Flying Rock for Demolition of Cooling Tower Made by Reinforced Concrete Materials in the Method of FTA
FE Evaluation of Reinforced Concrete Bridge Decks with Glass-FRP Composite Bars
Uplift Model Analysis for Shallow Overlaying Slurry Shield Tunnel Based on Time-Varying Behavior of Cement Grouting Material
Numerical Analysis of Blast Load from Explosive Materials Using Finite Volume Method
Bearing Capacity Improvement of Shallow Foundations Using Cement-Stabilized Sand
Prediction of Collapse Area of Construction Materials for Cooling Tower with Different Cut Height Due to the Blasting Demolition
1D Finite Element Model for Tapered Cross-Section Steel-Concrete Composite Material Beam
Compressive Strength and High-Temperature Residual Strength of Cement Specimens Containing Bagasse Ash
Long-Term Behavior of Low-Heat Cement Concrete under Different Curing Temperatures
Comparative Study of Fire Resistance Performance for Long Span Beams Constructed with High Strength Submarine Structural Steels According to Boundary Conditions
Application of Environmentally Friendly Materials in Landscape Infrastructure
Mix Proportions of High Flowable Early Strength Mortar for Emergency Repair of Damaged Road Base in Rural Area
Experimental Study on the Combined Effect of Cyclic and Static Loads on the Mechanical Properties of the Saturated Soft Clay Material
Organo-Mineral Additive Based on Mixed Clays
