Manufacturing Science and Technology, ICMST2011

Erscheinungsjahr 2012
ISBN: 978-3-03785-295-8
Verlag: Trans Tech Publications

Buch, Englisch, 8340 Seiten, 8-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 16000 g

Volume is indexed by Thomson Reuters CPCI-S (WoS).The objective of ICMST 2011 was to provide a platform where researchers, engineers, academics and industrial professionals from all over the world could present their research results and discuss developments in Manufacturing Science and Technology. This conference provided opportunities for delegates to exchange new ideas and applications face-to-face, to establish business or research contacts and to find global partners for future collaboration.

Autoren/Hrsg.

Fan, Wu

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik

Inhaltsverzeichnis

Preface and Organizing Committee
Chapter 1: Computer-Aided Manufacturing
Automatic On-Line Detection and Sorting System Design and Implementation for Paper-Making Printing
Design and Realization of Monitoring System for Multiway pH Value
The CAD/CAM of Hydraulic Valve Block Based on Pro/Engineer
Design and Implementation of a Computer Vision Based Inspection System Using CUDA
Structure Reverse Design and CFD Analysis on Agitated Flow Field of Submersible Mixer
Robust State-Feedback Controller Design for Uncertainty Singular Systems
An Estimation Approach Based on Predictive Filtering to Missile Guidance
Controller Design for Spinning Missile with the Actuator Limit
The Time-Delay Study on Vehicle Active Control Suspension
The Research on High-Voltage Transmission Line Relay Protection Setting Related to OLTC Anti-Icing
Development of Islanding Detection Based on Power Controlling for Grid-Connected of Dispersed Power Generation
The Stabilization of Singular Linear Large-Scale Control Systems with Output Feedbacks
Multimode Adaptive Control for Tank Gun Control System Based on Tracking Differentiator
Optimization of PMSM Sensorless Control Based on Improved PSO Algorithm
Design of PID Algorithm Control System Based on DSP
The Suspension System Design for the Tensioner of the Ocean Pipeline Barge
Durability Test System of Four-Channel Motorcycle Wheel Speed Sensor Based on LabVIEW
Improved CMAC Neural Network Control for Superheated Steam Temperature
Researches on Start Control Strategy of CNG Engine
Design of Embedded CNC Device Based on ARM and FPGA
Study on Floating Raft Vibration Isolation System for Pumping Unit
Distributed Flexible Strip-Type Soil Moisture Sensing and Detection System
Design of Artificial Climate Chamber Control System for Food Crops Cultivation Based on Expert Knowledge Base
Research on the Identification of Tubular-Furnace Based on CARIMA Model
Development and Design of Dance Robot Based on Single-Chip Microcomputer AT90S8535
Study on Sliding Mode Control with Gray Theory for Electro-Hydraulic Servo System
Research on FFU Power Supply Based on Variable Universe Adaptive Fuzzy Control
Calibration System Development of Electronically Controlled Engine Based on CCP
Analysis for Obstacle Negotiation Capability of Wheel-Legged Robot
Research on the Singularity and Stationarity of 3-TPT Parallel Machine Tool
Speed Sensor-Less Indirect Vector Control System Based on a Novel Sliding Mode Control Speed Observer
Research on a New Automatic Instrument Transformer Calibrator
Cascade Fuzzy Self-Tuning PID Control for the Liquid-Level Control of Double Water-Tank
Design of Real-Time Monitoring System for Surface Water Pollution Based on GPRS
Experiment on Ultimate Shear Strength Parameters of Bolt Anchored Section
Application of Embedded Technology for Induced Polarization Instrument
Alleviate Stressful Voltage Condition of Power System by Means of Adjusting the Generation Mode Considering Energy Saving
Design of Double Closed Loop Control System of Automatic Clutch
Application of Pressure-Rate Deconvolution to Well Test Interpretation of Low Permeability Reservoirs
Research on Fault Diagnosis of Certain Armored Vehicle’ Gear-Box with IMF’s Energy Moment
Study on Energy-Saving of Urban Water Supply System Variable Frequency Pumping Station
Study on Voice Transmission System of the Optical Fiber for Tube Leakage Monitoring Installment in the Power Station Boile
Optimizing Back Surface Field of Heterojunction Thin-Film Solar Cells by Numerical Simulation
Identification and Quantitative Feedback Control of Precision Mechatronic Systems
On Monitoring and Testing System of the Hydropower Unit Vibration Based on Virtual Instrument Technology
Fuzzy Control Technology for Drive System of Switched Reluctance Motor
Wavelet Neural Network Based Adaptive Robust Control for a Class of MIMO Nonlinear Systems
The Research of DC/DC Power Storage Converter Controller Based on Hysteresis Control
A New Model of Intrusion Detection Based on Data Warehouse and Data Mining
Rapid Control Prototyping Design of DSP-Based Motion Controller
Control System Design and Data Communication Realization of Road Accelerated Loading Test Equipment
The High-Power of DC Power with Auto Tracking Power Frequency
Design of New Automobile Rotational Speed Measuring Device
High-Performance Sensorless Control of PMSM Based on Sliding Mode Current Observer
Rotor Design for High Speed PM Machine Based on Riccati Transfer Matrix Method
Multisensor Tracking of a Maneuvering Target in Clutter with Proposed Parallel Updating Approach
Parameter Tuning for Sensorless Induction-Motor Drive Use Stator-Current-Based MRAS Estimator
Research on Attitude Control of Spacecraft Based on ADRC
Automobile Reversing Radar Based on Ultrasonic Wave
Design of a New Structure for Anti-Upsetting of Axle-End in Wheelset Disassembly and Assembly
Stress Distribution of Strip at the Parts in Contact with Roll in Continuous Annealing Furnace
A Hybrid Algorithm to Solute the Problem of the Robot Path Planning
Study on Start Burning Performance of Micro-ICP Using Stereo Spiral Coil
Application of Time-Frequency Distributions to the Blind Source Separation of Mechanical Fault Signals
The Study on a New Type of Full-Voltage Starting Method of Asynchronous Motors
Extracting of Weak Periodic Impact Feature Based on Mean Filtering and Wavelet Transform
Research on Design Key Technologies for High-Power Submersible Motor
Experiment the Influence of Subsection on Leakage Reactance in Submersible Motor
Overview of the Low Voltage Ride-Through Technology for Direct-Drive Permanent Magnetic Wind Power System
Design of Detection Device for Solar Photovoltaic Lighting System Charge-Discharge Performance
Application of Improved RBAC in System Login Component Design
An Optimal Design Method Based on Feature Technology for Micro Device
Dynamic Modeling of Single-Wheeled Robot
The Application of the Niching Genetic Algorithm to Optimum Design of the YKK Series Induction Motor
Design of a Remote, Real-Time Elevator Monitoring System Based on the µc/os-II Operating System
Design of an Automatic Positioning System Used in Pipe Crawler Weld Based on TMS320DM642
A High-Performance Signal Processing System for Monopulse Tracking Radar
Core Loss Calculation in Step Magnetic of High-Speed Motor Stator
Design of Bending Fatigue Machine for Flexible Electronics
Cogging Torque Reducing in Dual-Rotor Motor by Suitable Selection Inner and Outer Slot Opening Widths
Design of the Underwater Acoustic Signal Acquisition System Based on the Pipelined Twin-AD
Design of External-Rotor Ferrite Permanent Magnet BLDC Motor
Controlling of Brushless DC Motor Based on Particle Swarm Optimization Fuzzy Logical Controller
Design of the A/D Conversion Circuit Based on ARM for the Time-Difference Method Ultrasonic Flowmeter
Evaluation on the Tensile Force of Geotextile and Geomembrane Used on the Side Slope of a Waste Landfill
The Control System on Coke Machine Interlocking and Automatic Running
Design and Simulation of Variable Speed Constant Frequency Brushless Doubly Fed Wind Power Generator
Study of Modified Sliding Mode Control Strategy for STATCOM with LCL Filter
Design and Research of Crash Sense Module of Vehicle Emergency Call System
The Simulation and Research of Chaos in Current-Controlled Boost DC / DC Converter
Multi-Model Adaptation Fuzzy Control for the Deep Sea Walking Hydraulic Control System
Analysis of Reliability for Hoist Main Control System Based on Markov Process
The Design of Mini Quad-Rotor Unmanned Aerial Vehicle Control System
The Synchronization Control of the Hydraulic Press Brake Based on the Virtual Shaft Control Algorithm
A Fuzzy Compensation Control System for Underwater Vehicle Based on Kalman Filter Predictor
A New Teaching Method in a Kind of Industrial Palletizing Robot
A New Engineering Model of Solar Array and MPPT Control
Optical Flow Sensor Designed for Altitude-Holding Flight
The Robot Path Planning Based on Region Partition to Node Optimization
Research on the Hybrid Active Power Filter
Performance Improvement on Edge-Based Human Detection Using Local Contrast Enhancement
Simulation Study of Harmonics and Reactive Power in Three-Phase Full-Bridge Controlled Rectifier Circuit with Resistance-Inductance Load
Measurement of Ultrasonic Attenuation Coefficient of Mud
Trajectory Tracking of a Spherical Robot Based on an RBF Neural Network
Limiting Power of High Power Microwave Pulses from Aperture
An Improved Design of Controller for Medium Frequency Induction Power
Parameters Identification of Induction Motor for Electric Vehicle Based on Least Squares Method
Study on VAV Temperature Fuzzy Controllers with Self-Tuning Parameters and Variable Universe
Development of the Performance Testing System for Radio Fuze
Robust Data Reconciliation in Linear Process
Improved Differential Evolution Algorithm for Structural Optimization Design of Flumes with Hybrid Discrete Variables
The System of the University Experimental Physics Course-Choosing on ASP
Research on Permanent Magnet Linear Motor without Friction Feed
Application Research of CMAC-PID Control in Photovoltaic Tracking System
Design on Novel Photoelectric Sensor for Refractive Index Measurement
Numerical Simulation of Hammer Forging Process for Inconel 718
Application Study of Active Disturbance Rejection Control Technology
Study on Rheo-Diecasting for In Situ Synthesized Mg2Si/AM60 Composites
A Study on Method of Map Conflation Based on Topological Relationship
Excitation Control Strategy of Brushless Doubly-Fed Generator for Variable Speed Constant Frequency Wind Power System
Implementation of a DirectDrive Technology Realization DC-Coupled Output on Video-Output Circuits
Modeling and Testing a Screw Expander Integrated into a Trilateral Flash Cycle
Research of Simulation Parameters of Oil Field Distribution Network Based on Grey Prediction
Chapter 2: Powder Metallurgy and Ceramic Forming
Nonlinear Immune PID Controller and its Application to the Heat Milling System’s Material-Level Control
A New Temperature Setting Control Method for Regenerative Rotary Reheating Furnace
Study on Rapid and Non-Destructive Identification of Starch Categories with NIR (Near-Infrared Reflectance)
Application of Improved Fuzzy PID Control Algorithm in Heating Furnace
Research on Wood Powder-Based Rapid Prototyping Technology
A Thermodynamic Model for Nearest-Neighbor Distributions in Annealed Quaternary Alloys
Design and Development on Piezoelectric Ceramic Type Insole 3D Force Measurement System Based on LabVIEW
Manufacturing Execution System Based on the Soda Ash Industry
Study on Characteristics of Metal V-Belt Infinitely Variable Power-Split Transmission
High Throughput Speciation Analysis of Mercury in Water Environment by Short Column Capillary Electrophoresis On-Line Coupled with Inductively Coupled Plasma Mass Spectrometry
Chapter 3: Surface, Subsurface, and Interface Phenomena
Dynamical Integral Sliding Mode Control for Permanent Magnet Ring Torque Motor
Study of Pulsed Magnetic Field Generator for Magnetoacoustic Tomography Technology with Magnetic Induction
The Infrared Characteristics of the Wall Temperature of Boiling Heat Transfer in Microchannel
Feed Forward Active Disturbance Rejection Control Method for Common-Rail Pressure Control of Diesel Engine
Electrical Properties of Multilayer Synthesized CuInSi Thin Film
The Impact of Surface Tension on the Oil-Water Stratified Flow
Improvement of Crystal Growth Control System
Starting Performance of Novel Magnet Arrayed Permanent Magnet Synchronous Motor
Research on the Microwave Propagation in the Evaporation Duct with Obstacles
Performance Experiment of Natural Refrigerant Cascaded Refrigeration System
Ultimate Slip between FRP and Concrete on their Interface
The Effect of Drag-Reducing Polymer on Heat Transfer in Gas-Liquid Two-Phase Flow
Determination of Trace Level Oxytetracycline and Influences of Coexisting Pollutants on its Sorption by Three Kinds of Sludge
Research on the Coupling Relations of the Possible Factors Affecting Ammonia Nanofluid Bubbling Absorption
FEM of Residual Stress of EDMed Surfaces
Interfacial Microstructure and Strength of Friction Welding of Steel Tube to Aluminium Tube Plate Using an External Tool
Application of Taguchi and Response Surface Methodologies for Surface Roughness in Rotary Tool Polishing Hardness Mould Steels
The Effects of Materials Properties & Angle Junction on Stress Concentration at Interface of Dissimilar Materials
Wear Behavior of Surface Treated Alloy Steel with Assorted Blends of Fine Particles by Using Plasma Spray Process
A Study on Interfacial Reaction and Titanium Distribution in Brazing Sapphire to Inconel 600 Using Cu/Ni Porous Composite
A Study on the Effect of Process Parameters on Surface Topography of Al Thin Films on Various Substrates Using AFM
Chapter 4: Composite Materials
Preparation of Geopolymer Using the Slag from Direct Reduction-Magnetic Separation of Refractory Iron Ore (SDRMS)
Research of Person-Parachute System Motion in Free-Fall Phase
Dexterous Robot’s Finger Actuated by Pneumatic Artificial Muscle
Study on PMV Index Forecasting Method Based on Fuzzy C-Means Clustering
RVE Based Numerical Evaluation on Effective Mechanical Properties of Composite with Randomly Distributed Multi-Phase Inclusions
Preparation of Modified Cu-Antibacterial White Carbon Black by Microwave Drying
Study on Morphological Structure and Application of Ag-La-Inorganic Antibacterial Material Dying by Microwave
A Study on Ammonia Nitrogen, Phosphorus and Organic Pollutants Removal of Zeolites by Salt Modification
Effect of Ultrasonic Wave on Ni-P-Al2O3 Electroless Composite Coating on Magnesium Alloy
Processing Method and Property Studies of Composite Geotextiles
Chapter 5: Computer-Aided Design in Materials Engineering
Computations for Simplification of Canned Cycles in CNC Programming for Turning Operations
Application of Stochastic Differential Equation and Optimal Control for Engineering Problems
Multi Objective Optimization of Noise and Vibration in Passenger Car Cabin by Using Goal Programming Approach
A Framework for a Development of an Intelligent CNC Controller Based on Step-NC
Realization CNC Controller Enable Machine Condition Monitoring Architecture Based on STEP-NC Data Model
A Study on Extraction Method of Non Geometry Information in Engineering Drawing Title Block
Identification and Fault Diagnosis of an Industrial Gas Turbine Using State-Space Methods
Study on the Optimization Process Technology in NC Machining Based on the Polychromatic Sets Theory
Adaptronic Systems in Robot Manufacturing
Prediction of Tensile Behavior of DP 590 Steel Tailor Welded Blanks by ANN
Design a Low Noise 5GHz Differential Cross-Coupled VCO and Colpitts VCO Using BiCMOS Technology
Robust Part Quality by Controlling the Injection Moulding Process with 24 Fraction Factorial Design: A Case Study
Web Adds
Weighting Matrix Selection Method for LQR Design Based on a Multi-Objective Evolutionary Algorithm
Secondary Development of Blades Parametric Design of Hydraulic Torque Converter Based on CATIA
Single Input Multi Output Adaptive Network Based Fuzzy Inference System for Machinability Data Selection in Turning Operations
Applying a Modified Particle Swarm Optimizer to Section Optimization of Steel Framed Structures
Research on the High Frequency Realization of High-Power Inverter
A Study on the Characteristics of Planar Motor with Halbach Array
Stability Analysis of Beam’s Non-Linear Vibration with Time-Delay Feedback Control
Multi-Rate Digital Control for Pulse Detonation Engine Control Applications
Implementation of Turntable Servo Control System Based on Fuzzy Self-Tuning PID
Contour Extraction of Flame for Fire Detection
Simulation Research on the Variable Step Size MPPT Control for PV System
Comparisons between Topologies of Flux-Switching Electrical Machine
The Unified Design for Inter-Area Stability Control Based on Backstepping
Using Governor Sensitivity Test Method to Analyze Moment of Inertia of Engine Generator Set
Systemic Design of Four Vat Energy-Saving Quenching Machine Controller
Esterification Research on a Bio-Oil Model Compounds System with an Optimal Solid Acid Catalyst
Influences of Clearance in the Nether Wearing Ring on the Self-Excited Vibration of the Francis Turbine
Navigation System of Mobile Platform Based on Open Architecture for Agricultural Machinery
Synchronization Control Strategy Applied in Two Cylinders System of Rolling Mill
Electromechanical Actuator Controller Design with Optical Encoder Feedback
Study on Assessment Model of Lightning Proof Abilities of HV Transmission Line Based on ArcGIS
PXI-Based High Performance Data Acquisition System for Fuel Injection System of Diesel Engine
Research of Video Tracking Algorithm Based on the Blob Analysis
Generalized Multiple-Model Adaptive Estimation for Mars Entry Navigation
Research on Transient Fuel-Film Compensation Control Strategy for a Port-Fuel-Injected Engine
The Air Controlled Hydraulic System Design of 3201z-Type Dump Truck Lifting Mechanisms
The Design and Analyses of Magnetorheological Fluid Throttle Valve
Design of Automated Distillation Analyzer Based on STM32
Seal System Optimization Study of an On-Off Valve Based on CFD
Hoist Safety Risk Assessment Model Research
Research on Auto Control System for Ship Loader Based on AC800M
Motor Position Detection Unit for Servo Control Application
A Mesh-of-Appendixed-Trees-Based Technique Carried on the Crossed Cube
Key Establishment Scheme for Distribution Automation System Using Logical Key Hierarchy Approach
Research on State Intelligent Maintenance Based on Sonic Information of Power Transformers
Research on Technology of Thrust Asymmetry Lateral Compensation for Large Aircraft
Application of Fuzzy Control in Transformer Cooling System
Time-Varying Sliding Mode Control for Linear Motor Servo System
Human-in-the-Loop Intelligent Control System for Continuous-Flow Grain Drying
Combined Simulation Based Commutation Failure Analysis in HVDC Systems
A Novel Automated Balancing and Correcting Machine
Analysis of Fault Recorder Data for Short-Circuit Current in a 500kV Busbar Short-Circuit Accident
Electromagnetic Design of Dual Stator-Winding Induction Generator System with Boost Converter
Interaction and Coupling of Robot
The Study of the Multi-Body System Theory on Basis of CNC Milling Machine Error
Design of Underground Mining Personnel Locating System Based on nRF24L01
The Realization of Palm Kneading for Chinese Massage Robot
Path Planning of Avoiding Obstacle for Fruit-Picking Manipulator Based on Position Information
Design of Direct Yaw Moment Control System to Enhance Vehicle Stability Based on Fuzzy Logic
High Efficiency 500W RF Generator
Design of Remote Transmission System for Wireless Heat Metering
The Optimal Controller Design of Zero Steady-State Error for Nonlinear Systems with Composite Disturbances
Research on Linear Motor for Linear Compressor
Simulation and Parameters Tuning of Second Order ADRC Controller in Simulink
Active Power Smoothing of Wind Generator Based on Wind Speed Prediction and Inverse-System
The Method of Pole Width Modulation Reducing Cogging Torque in Permanent Magnet Motor
Fault Feature Extraction for Gearboxes Using Empirical Mode Decomposition
Development on a Test System for Starting Relays Based on IPC
Determination of Key Technical Parameters of Special Hydraulic Turbine for Cooling Tower
Research on the Design of Linear Drive Motor of New Pumping Unit
Research on the Pumping Unit Model Driven by Linear Motor
Statistical Method for Rotating Machine Fault Diagnosis
Research on Knowledge-Based Injection Mould Project Design System
The Optimization of ITD in Direct Air-Cooled System
Research on the Multi-Parameters Matching Control of the Cooling System for the Diesel Engine on the Numerical Simulation Technology
Research on Parametric Design Method of Combustion Chamber on Diesel Engine
The Review of Technology of Power Quality Disturbances Generator
The New Elman ANN Application in Accuracy Improvement of Robot Navigation and Obstacle Avoidance Technology
UAV Automatic Landing Control Law
Design and Application of Long Distance Oil & Gas Pipeline Stress & Strain Monitoring Sensor
Modeling of Distillation Tower Temperature Based on D-FNN
Research on a New Type of Lithium Battery String Equalization and Management System
Application of FSK Technology in Welding Machine
New Idea of the Multilevel Leakage Protection in Underground LV Distribution Networks
Research of Linear Differential Hall Sensor Modeling and Output Characteristics Experiment
Application of RBF Neural Network in Dynamic Weighing
A New Method of Rolling Prediction for Gas Emission Based on Wavelet Neural Network
The Design of Five Degree of Freedom Robotic Arm System
2-Phase Symmetrical PWM Generator Using CPLD for Ultrasonic Motor Drive
Nonlinearity of PMSM’s Low-Speed Operation Caused by Dead-Time
Model and Auto Take-Off Control Law Design of Unmanned Aerial Vehicle
Digital PID Algorithm of Navigation System for Spraying Robot
Study and Implementation of Fault Diagnostic Algorithms on Hydraulic Power Cart for Aircraft
Low-Cost PLC-Based Control of a 2-DoF Purely Translational Parallel Robot
A Misfire Fault Diagnosis System Based on Improved Neural Network
Modeling of Multi-Agent System for Drilling Simulation
Design for the High-Rise Cable-Suspended Rescue Robot
Servo Motor Synchronous Control System Based on PMAC Controller
Research of Redundancy Management on Fight Control Computer for Unmanned Aerial Vehicle
Research on Internal Communication of Redundant Flight Control Computer for UAV
Study of Missile Radiator Predicting and Tracking Technology on the Basis of Kalman Filter and Mean-Shift Algorithm
Research of Optimal End Guidance Law about Target-Seeking UAV under Passive Guidance
The Software Design and Implementation of a Real-Time Automatic-Tracking System
Infineon Microcontroller Based Frequency Converter Design
Motion Consistence and Textural Coherence based Error Concealment Algorithm for Corrupted Macroblock
Intelligent Autonomous Navigation System for the Wheeled Mobile Robot
Trajectory Control Using Linear Control System on Mobile Robot
Start Control of Ultrasonic Motor Based on Neural Network
New Method for Construction Land Prediction Incorporating Genetic Algorithm and Support Vector Machines
Research on Powertrain System of Series HEB Control Strategy Simulation
Research on Management Information Platform of Dynamic Water Rights Based on Grid Technology
Energy Storage and Deposition Characteristics of Spark Ignition System
System Based on BP Network for Garment Quality Forecast and Management
Numerical Analysis on Propagation and Fatigue Life of Asphalt Pavement Surface Crack
Parameterized and Modular Theory Used in Rapid Design System of Simi-Trailer Tanker
Chapter 6: Casting and Solidification
Study and Application of the Variable Torque Slipping Clutch with Skewed Rollers
Hybrid Genetic Algorithm-Based Production Planning for Steel-Making and Continuous Casting Process
Mudstone Creep Test and Numerical Stimulation of Casing Loads in Deep Well
Research on the Integration Credibility Model of COTS
Simulation and Implementation for the Speed Control System of Horizontal Continuous Casting Dragger for Copper
The Analytical Solution of Single Pipe Piles under Axially and Laterally Free Loads
Analysis of Piles Subject to Axial Load and Lateral Soil Movement
Experimental Research on Vacuum Casting of Micro-Gears
A Novel Technique for Crack Resistance of Bulk Mass Concrete Pier
The Application of New Blasting Technique on the Replacement of Soft Silt Foundation by Rock Filling
Properties of Pressurized Lost Foam Casting of Al-11Si Alloy
Formation Behavior of Intermetallic Layer on Die Material in Casting Al-Si Alloy with the Variation of Fe Content
Rapid Solidification Processing: Melt Spinning of Al-High Si Alloys
Chapter 7: Machining
Synthesis of Zeolite Membranes from Coal Fly Ash
Improvement of Local Decrease in Material Thickness on Fuel Filler Tube
Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Investigation of Material Removal Rate
A Method to Reduce Milling Time for Ti-6Al-4V Alloy for Controlled Depth Milling Using Abrasive Water Jet Machining
Investigation of Static Failure for Cemented Carbide Cylindrical End Mill
The Using of Anti-Sulfur Drill Pipe in High Sulfur Oil-Gas Field
Backstepping Adaptive Control of NC Tool Crossbeam Magnetic Levitation System
Static Performance Parameters and Analysis of the Hydraulic Expansion Toolholder
Design about Monitoring and Diagnosis System Structure of Rotating Machinery Based on LabVIEW
Decomposition of Cefotaxime Sodium Wastewater by Ultrasonic Fenton Method
Finite Element Simulation of the Residual Stresses in Butt Weld Plate of Aluminum Alloy
Vibration Simulation of Articulated Dump Truck with the Variation of Longitudinal Center of Gravity Position of Rear Sprung Mass and Rear Suspension Stiffness
Development of Drill Monitor and Operation Mode Recognition Based on All Hydraulic Core Drilling Rig
Research on Starting Process of a Novel Wound Rotor Line-Start Permanent Magnet Synchronous Motor
A Finite Element Analysis of the Normal Combination Round and Spline Broach Based on ANSYS
Performance Analysis of Doubly Excited Brushless Machine with Radially Laminated Magnetic Barrier Rotor
Study on Electronic Excitation Temperature of Argon Plasma Using Low Pressure Micro-ICP Excitation Source
Analysis on Variability of Mechanical Parameters in the Process of Rock Damage
Influence of Rotor Structure on Starting Performance of PMSM Used for HEV
Broken Rotor Bar Fault Detection Analysis
The Synchronous Control Study of once Forming Leaf-Spring Rolling Mill
Oscillation Characteristic of Single Free Piston Engine Generator
Experimental Research on Regenerative Braking of Wheel-Hub Motor
Collapsing Pressure of Casing Located at the Bend Part of Casing-Exit Sidetracking Well
Round-Guard System Based on the Vibration Cable Transducer
Static and Dynamic Characteristics Study of Wind Turbine Blade
Study of Fluxing Process for Hot Dipping Galfan Alloy on Steel Wire
Research on Growth Process and Microstructure of Microarc Oxidation Coating on Titanium
Research on the Characteristic of Diesel Elastic-Plate Impingement Spray
Experiment Study of Chip Formation and Cutting Force of Hardened AISI 1045 Steel in High Speed Machining
Analysis of Main Dimensions Effects on Performance of Transverse Flux Switched Reluctance Motors
Study on Acoustic Emission Source Character of Various Welding Defect Types
The Experiment Research on Applying Air Source Heat Pump in Boiled Water Machine
Scattering by a Conducting Infinite Cylinder Illuminated with a Gaussian Beam
Research of Catalytic Performance over Transition Metal Modified MnOx-CeOx/ACF Catalysts
Chapter 8: Modeling, Analysis, and Simulation of Manufacturing Processes
Control and Robust Vision Relative Navigation for Autonomous Aerial Refueling
Transient Stability Simulation by Explicit and Symplectic Runge-Kutta-Nyström Method
Research of Redundancy Management on Dual-Redundancy Brushless Direct Current Electric Rudder Loop
Research on Islanding Detection for Grid-Connected Inverter and Protection Criterion Based on Fuzzy Clustering Analysis
Characteristic Analysis of the Coupled Harmonic Model and its Application in Harmonic Power Flow
Design and Achievement of the Erection Test System Controlled by Single Neuron PID Controller
An Algorithm of Converting UG Model to MCNP Geometry Model
Modeling and Analysis of Electro Hydraulic Brake System Based on AMESim/Matlab
Modeling and Design of Hydraulic Driving Hobbyhorse Clamp Holder
Extreme Weather Loading Risk Model of Overhead Transmission Line
Fuzzy Control of Vehicle Suspension System
Study on Simulation of Three-Phase Z-Source Inverter for Grid-Connected Wind Power Generation
High-Sealing Microvalves for PCR
Waveform Relaxation-Based Large-Scale Circuit Simulation for MOSFET and Lossy Coupled Transmission Line Circuits
Effect of Magnetic Circuit’s Structure Parameters on Torque-Speed Characteristic for Electromagnetic Damper
Numerical Simulation of the 1.2MW Wind Turbine Flow-Field
Theories on the Digitalized Intelligentized, Networked, Miniaturized Development of Electronic Technology
Research on Transient Stability Simulation of Ship Power System
The Fine System-Level Calibration Technique of Size Effect Error for the Fiber-SINS
Analytic Prediction of Inductances for Toroidal Motor with Concentrated Windings
Design and Application of the Multifunctional Digital Automobile Instrument
Weak Coding Signal Detection under the Background of Sea Clutter
An Optimized Angle Control Strategy for Doubly Salient Electro-Magnetic Motor Based on the Half-Bridge Converter
The Study on the Fuzzy Control Algorithm for Main Steam Pressure Control of Circulated Fluidized Bed Boiler
Analysis of Tribological Characteristics between Plastic and Steel Helical Gear
Simulation and Research on Double Cylinder Hydraulic System Synchronized Control for Segment Erector of TBM
Real-Time Optimization of Transportation System for Earth-Rock Filled Dam Construction with GPS-Based Monitoring System
Salient Pole Force Analysis and Inhibition of Tubular Permanent Magnet Linear Synchronous Motor
Modeling and Simulation of Propeller and Hull System for Marine Propulsion Plant
Design of Coarse-Fine Combined Synchronization Control System for Lithography Based on Cross-Coupled Sliding Mode Control
Internal Model Control of Three-Phase Four-Leg Active Power Filter Based on Online LS-SVM ANN Inverse System Method
Research on Stability of Networked Control System with Uncertain Time-Varying Delays
An Improved Z-Source Boost-Buck Rectifier Topology with Lower DC Output Voltage
Fuzzy Hierarchy Comprehensive Evaluation on Dam-Break Risk Analysis
A Simplified Model of Write Amplification for Solid State Drives Adopting Page-Level Address Translation Mechanism
Stabilization for Quantized Feedback Control Systems: An LMI Approach
Optimization Design on the Iron Beam Sectional of the Electricity Transformer
Simulation Research of AC Servo Driver Speed Adjusting System Based on SVPWM
An Adaptive Tracking Algorithm of Maneuvering Target
New Method to Ameliorate the Large Telescope Speed Smoothness
Improved Power Flow Algorithm Incorporating Multi-Terminal VSC-HVDC
Radial Laminated Magnetic-Barrier Rotor Optimization Design of Brushless Doubly-Fed Machine
Analysis on Ground Subsidence in Underground Mining
Numerical Simulation of Flow Field in Burnt Lime Hydrator
Thermal Stress Simulation of the Surface Grinding
Numerical Simulation of Particle Axial Mixing in Rotary Kiln
An Automatic SoC Design Methodology for Integration and Verification
Modeling of Electromagnetic Heating Systems
Design and Analysis of a Piezoresistive Accelerometer with the Film-Island Structure
Application of Model Predictive Control Based on BPNN to Heating Boiler
The Optimization Model and its Algorithms for Multiple Transportation Modes Selection in the Fourth Party Logistics
Analysis of Reactor Magnetic Circuit Based on ANSYS Command Flow
Numerical Simulation of Fluid Transients in Servo-Controlled Hydraulic Piping
Analysis of Snubber Circuit Parameters Based on an Excitation Controlling Circuit
Strategy and Implementation of System Performance Optimization
Research of Closed-Loop Calibration Model Based on Kalman Filtering Algorithm
Restrike Modeling of Vacuum Circuit Breaker Switching Off Shunt Capacitor Banks with EMTP
Research on Numerical Simulation of Dynamic Pressure for Stress Sensibility Coal Seam
Study of Voltage Level Sequence Based on the SE-DEA Model
The Research and Analysis Based on a New Hybrid Chaotic Sequences
Modeling and Simulation for Boost Converter Based on HDS Theory
A Procedure for Modeling of Holonic Control Systems for Intelligent Building (HCS-IB)
Research on GMM Background Modeling and its Covariance Estimation
Study and Application of ESD Generator Modele
A Method for Modeling and Simulation of Differential Drive Mobile Robot Localization Based on EKF Multisensor Fusion
A New Format Power Flow Computation Software Analysis and Design Based on MATLAB
A New Method for Modeling of Fully Flexible Aircrafts
Simulation Study of Variable-Frequency Speed-Regulation Vector Control System of Asynchronous Motor
Research and Analyze on the Lightning Test of Aircraft Model
Modeling of Active Flexible Suspensions by Mobility and Transfer Matrix
Simulation for Expansion of Fabrication Hydraulic Torque Converter and Corresponding Experimental Investigation
Modeling and Simulation of Electric-Hydraulic Clutch on Light Vehicle
Study on Modeling and Simulation of Digital Factory Technology in Complex Production Development
A Blackout Model Based on Optimal Risk Index and High-Risk Line Identification
Computational Model for Machine Vision Inspection Based on Vision Attention
Fuzzy Based Model Predictive Control for Uncertain Nonlinear System
Temperature Simulation on Rotor and Stator of Hydro-Generator
Output Feedback Adaptive Maneuvering for Nonlinear MIMO Systems with High Frequency Gain Matrix Hurwitz
The Operating Point Determination of Special Turbine in Cooling Tower
Aircraft Landing Gear of a Dynamic Research and Computer Simulation
Research on the Pollution Diffusion Regularity near Sewage Outlet Areas in Yuncheng Reach of the Fen River
Numerical Aperture and Partial Coherence Optimization in Optical Li-Thography under Off-Axis Illumination
Lack of Oil of Oil-Paper Capacitive Bushing Damage and its Judging Methods
Study on Improving Power System Damping Characteristic in Novel Excitation System
A Simple Method of ABS Optimal Slip Ratio Identification
Rotor Speed and Stator Resistance Identification of Direct Torque Control for Induction Motor Based on Mutual MRAS
Numerical Modeling and Solution of Ground Water Inrush at the Baixiangshan Iron Mine
Study on Regulating Reservoir Changing Water Resource Value Mechanism
The Research of Traveling Wave Fault-Location Methods for the 10kv Distribution Networks
Computer Data Structure for Geological Entities Modelling Based on OO-Solid Model
Research on the Efficiency Evaluation Model of Fire Command Automation System
A New Method for Faulted Line Identification in Neutral Non-Grounded Distribution Systems
The Simulation of Pitch Control System for Variable Speed Wind Turbine Based on Neural Network
Design of Li-Ion Batteries Equalization Module of Electric Vehicle
System Stability Improvement of DG Connected to the Grid Based on Power Conversion and Energy Storage System
The Remote Warning and Diagnosis System for CNC Machine Tools
Finite State Machine to Optimize Multi-Tasking Concurrence Technology for Real Time Operating System
The Simulation Design of Spatial Arc Cam Numerical Control Maching
Model Designing and Simulation Realization of ARC Protection System Based on GOOSE
Information Model of ARC Protection System Based on IEC 61850
Study on Pilot Performance Model
The Principle and System Design of Self-Cleaning Filter
Comparison of Expert and Novice Eye Movement Behaviors during Landing Flight
A Device Reactive Capability Assessment Model Based on Improving Voltage Stability L Indicator
NURBS Interpolation Algorithm Based on Feedrate Sensitive Points Identification
The Performance Assessment and Optimal Design of EWMA Charts Based on Average Product Length
Finite Element Simulation on Temperature Field Couple under Contact Resistor Thermal and Friction Thermal in Friction and Wear
A Domain Decomposition of the Finite Element-Boundary Integral Method for Scattering by Deep Cavities
Study and Simulation for MPPT Control of Photovoltaic Generation System Based on Combining Constant Voltage Method with Adaptive Duty Cycle Perturb Method
Simulation of Islanding Detection for Photovoltaic Grid-Connected Inverters Based on Positive Feedback Intermittent Frequency Drift
Research on Energy-Saving Control Technology of Boiler
Fuzzy Parameters PID Control and Simulation Experiment of Permanent Magnet Linear Synchronous Motor
A Flux Observer of Voltage-Current Model Based on PI Regulator
Analyze of Vehicle Active Rollover Control on Air Spring
Refinement Envelope Analysis for Small Failures of Rolling Bearing
Research on the Influence of Zero Space Voltage Vectors on Direct Torque Control of PMSM
Research on Modeling and Control Methods of Variable-Speed Variable-Pitch Wind Turbine Generators
Characteristics Analysis of a Novel Detent-Force-Based Magnetic Suspension System
An Approach for Electrical Inter-Harmonic Analysis Based on W-H Transform
Model Reduction of a Two-Link Rigid-Flexible Manipulator Based on Spectral Approximation Method
The Simulation Research of Rotor Flux Model in Asynchronous Motor Control
The Analysis of Air Gap Flux Density in Permanent Magnet Brushless Motor with External Rotor
The Design of the Small Automatic Batching Machine Control System
The High-Gain Boost Converter for Maximum Power Point Tracking in Photovoltaic System
Research on Key Technology of Airport Simulation Based on OSG
Chapter 9: Composite Materials II
Synthesis and Industrial Trial of New Composite Cationic Flocculant PAFS
Analysis on the Loading Stress, Thermal Stress and Coupling Stress in PCC-AC Composite Pavement
The New Fire Prevention Materials Using in the Coal Fire Zones-Foamed Gel
Study on Stirring Brazing of SiCp/A356 Composites with the Zn27Al Filler Alloy in Air
A Study of Structure Parameters of Block Copolymers Polystyrene-Polyethylene Oxides
Damping Analysis of 3D Composite Structure Embedded with Visco-Elastic Layer
Experimental Study of Mechanical Properties of Multiscale Carbon Fiber-Epoxy-CNT Composites
Investigation of Mechanical Behavior of Stir Casted Al Based Composites Reinforced With B4C Nanoparticles
Effect of Milling and B4C Nanoparticles on the Mechanical Properties of Nanostructured Aluminum Composite Produced by Mechanical Milling and Hot Extrusion
Mechanical Characterization of Polypropylene Natural Fibre Composites
Energy Absorption Capability of Hybrid Tube Made by Mild Steel and GFRP under Quasi-Static Loading
Direct Extrusion of Circular Profiles with Surface Composite Produced by Friction Stir Processing
Influences of Tool pin Profile on Microstructure and Mechanical Properties of Al/Cu Composites Fabricated via Friction Stir Processing
Some Investigations of Wet Sliding Behaviour of Al - SiC Particulate Composites
Composite Clayey Sand and Short Fiber
Multilayer Synthesized CuInSi Composite Film by Magnetron Sputtering
Inorganic Composite Material Based on Fly Ash, Red Residue from Bauxite Ore for Road Building Projects in Vietnam
Chapter 10: Materials Forming
Effect of Blank Holder Force with Low Frequency Vibration Technique in Circular-Cup Deep-Drawing Using AZ31 Magnesium Alloy Sheet
Performance of Modified Epoxy Resin by Inorganic Packing
Characteristic Features of Thickness Change of Pipe during Die Forming
Austenite to Ferrite Transformation after Hot Deformation of Low Carbon Steel
Rolling Stock Times and Aluminum Profiles Extrusion Development in China
Sucking Machinery of Transport for Dosing Granulations of Plastics at Injection Molding
An Upper Bound Analysis of the Ring Rolling Process
Review of STEP-NC Compliant System for Turn-Mill Operations
Based on Nash Optimization Decoupling Control System for Special Shape Pipe Automatic Welding Machine
Research on Meshing Theory of Involute Helical Gear with Asymmetric
Research on Dynamic Characteristics of Disc Brake
Analysis on the Process of Induction Heating for Shrink-Fit Chuck
Sensorless Control of SPMSM Based on High-Frequency Current Signal Injection in the Direct Axis at Low and Zero Speed
Finite Element Analysis of Ring-Plate Indexing Cam Mechanism Contact Stress Based on MATLAB and ANSYS
Resonance Analysis of Manipulators with Flexible Link and Flexible Joint
Optimum Design of Movement Parameters for Soft Plastic Vibration Sorting Machine’s Screen
Preload Analysis of Bolt for a Small Pneumatic Cylinder
Component of Clathrate Hydrates Formed in CH4-TBAB-H2O System
Preparation of Expanded Perlite-Based Binary Eutectic Composite of Phase Change Heat Storage Materials
Study on Natural Gas Converted to C2 Hydrocarbons in Plasma State
Chapter 11: Materials Behavior
Study on a Methane and Acetylene Spectrum Absorption Mode Gas Sensor with Optical Fiber
Spectrum Absorption Methane Gas Sensor with Optical Fiber Based on Frequency Harmonic Detection Mechanism
Research on Radial Inflation of Steel Tubes to Enhance the Crashworthiness of Vehicles
Based on the TLM Method 1000kV UHV Transmission Line Performance Analysis
Experiment Study of Coal Char Combustion Characteristics Under Mixed O2/CO2
Research on Adaptive Rotor Flux Observer with the Speed Feedback and Rotor Resistance Disturbing
Analysis for Radiation Characteristics of Horn Antenna for Out of Band
Fatigue Life Assessment of Crane Reel
Kinetics of the Ozonation of Tetrabromobisphenol-A in Wastewater
Influence of Additive White Gaussian Noise on the Interpolation Method of Discrete Spectrum
An Improved Direct Neural Network Approach to Flatness Pattern Recognition Baseed on GA-RBF
Analysis of Electromagnetic Field and Temperature Field of Low Speed High Torque Permanent Magnet Motor under Locked-Rotor Operation
The Characteristics of Melt Flow in Composite Spinning Micropore
Simulation and Dynamic Characteristics of Discharging Process of Storage Tank Used in Conventional Air-Conditioning
General Model of Optimal Control of Fully Flexible Vibrating Suspension Systems
Numerical Simulation of Dimethyl Ether/Air Laminar Diffusion Combustion Characteristic with the Different Fuel Inlet Velocity and Rotate Speed
The Improvement of Anti-Surge Control on Air Separation Compressor
Effects of Pressure Ports Layout on Angle of Attack and Sideslip Estimation in the Flush Air Data System
Effects of Additive on the Desulphurization Characteristics of Wastes
Effects of Speed Ratio K Value of Rubber-Bar on Cotton Harvesting Performance
Study on the Effects of Coal Blending on the Slurry Ability of Shenmu Coals
An Experimental Study on Nitric Oxide Reduction through Coal-Biomass Blend Reburning
Research on NDT System of Steel Bar Crack
Research on the Cr (VI) Absorption by Floc-Type Biosorbent AR
Heat Transfer and Anti-Fouling of Liquid-Solid Two-Phase Flow in Cooling Water Pipes of Staves
Temperature Calculation on Phase Lead Connecting Structures of 1100MW Generator Stator Parallel Rings
Study on Magnesium Alloy Sheets Deep Drawing at Gradient Temperature
Corrosion Resistance of Fe-B Alloys Immersed in Molten Zinc Bath
Adsorption Characteristics of Nitric Oxide and Sulfur Dioxide on Coal Activated Carbon
Fiber Optic Dynamic Light Scattering Systems
An Experimental Study on Diesel Fuel Droplets Coupling Evaporation
Optimal Control of the Industrial Furnace System
The Corrosion Resistance of Zn-Plated Samples with Blackish Green Passivation Film
Studying on the Propagation Behavior of Bent Crack Bending from Slant Pre-Crack with Compressive Residual Stress
Non-Thermal Plasma Assisted Catalytic Oxidation NO over Mn-Ni-Ox Catalysts at Low-Temperature
Study of XLPE Cable Materials Impurity Detecting Based on CCD Technology
Indoor Localization System Based on an Ultrasonic Sensor Network
The Study of Polymer Material Transference Phenomenon Measurement Method
Trace Gas Sensor Based on MEMS Cantilever Resonator
Growth Kinetics of Tetra-N-Butyl Ammonium Bromide Semiclathrate Hydrate through Concentration Determination and Microscopic Observation
Evaluation of Flexural Performance for Prestressed Concrete Beams with FRP Tendons
Effect of Chitosan/Polymeric Aluminum Composite Flocculant on Activated Sludge
Recycling Of the Epoxy Resin of the Waste Printed Circuit Boards Using Solvent Extraction
Effect of Coupling Agents on the Mechanical Properties of Wheat Straw Flour and Polyethylene Composites
Comparison Experiments on Relieving Differential Settlement of Subgrade by Graded Crushed Rock in Different Particle Sizes
The Experimental Study on Fatigue Properties of CFRP Reinforced Concrete Beam
Materials Flow Analysis on the System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry
Study on Dispersion Behaviors of Oolitic Hematite Ultrafine Particles in Water
The Technology and Equipments for Producing Gesso Blocks in a Wet Environment by Directly Using Desulfurization Gypsum
Characteristics of the SiN Uniaxial Strained NMOSFET with Channel Fluorine Implantation
Efficient and Stable Photocatalytic Activity of CeVO4/TiO2 Nanocrystalline Heterojunction under Visible Light Irradiation
Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method
Effect of Thickness on the Mechanical Properties of Magnesium Alloy Stent
Development of Inorganic Gas Barrier Material in Solar Cell Devices for Planarization Properties and Sublimate Defect Reduction
Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Minimum Surface Roughness and Maximum MRR
Deformation Behavior in Pipe Production Process for New High Strength Microalloyed Steel
Parametric Instability of Laminated Composite Doubly Curved Shell Panels Subjected to Hygrothermal Environment
Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
Microstructural Characterization of Wire Electro Discharge Machined Tungsten Carbide Cobalt Metal Matrix Composite
High Speed Impact Characteristics of Plastic Material Based on Finite Element Simulation
Characterization of Feedstocks for Injection Molded SiCp-Reinforced Al-4.5 wt.%Cu Composite
Numerical Investigation of Hollow Metal Cross Section Profiles on Impact
Effect of TiO2 on Optical Properties of PMMA: An Optical Characterization
Variation of Optical Band Gap Width of PVA Films Doped with Aluminum Iodide
Allotropic Modification Induced by Co60 Radiation on the Structural and Optical Properties of Aromatic Polymers
Research of Correctness on Internal Stress Measurement in Aluminum Alloy Thick Plate
Structural and Optical Properties of Zn Doped CdTe Thin Films by Stacked Elemental Layer Method
Effect of the ZnO Rods Growth Time to the Conductivity of ZnO Thin Film Combined with N3 Dye
Effect of Barium Aluminates on Acid Resistance of Fracturing Proppants
Effect of Hydrogen on the Properties of Amorphous Carbon Nitride Films
Study on the Properties of Ultra High Performance Fiber Reinforced Concrete
Investigating the Mechanical Properties of 0.5% Copper and 0.5% Nickel Austempered Ductile Iron with Different Austempering Parameters
Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite
Microstructure and Friction and Wear Properties of the Composite Material of TiC/7075 in Powder Metallurgy
Structural and Mechanical Properties of Ti1-XAlxN Studied by Ab Initio
Chapter 12: Aerodynamics
Study on the Degradation of Low Molecular Organics Using Boron-Doped Diamond Electrode
Properties and Sintering Mechanism of Lightweight Sludge-Flyash-Clay Ceramics
Technology Research on Waterworks Sludge for Ceramsite
Effect of Axial Force on Mechanical and Metallurgical Properties of Friction Stir Welded AA6082 Joints
The Accuracy Analysis on the External Circular of Zirconia Ceramic Spindle by Precision Machining
Preparation of Self-Releasing Glaze Ceramic Materials Utilizing Red Mud
Chapter 13: Environmentally Sustainable Manufacturing Processes and Systems
Sustainability Index Benchmarking in a Semiconductor Manufacturing Environment
Producing Paper Using Pineapple Leaf Fiber
Effect of Material Selection on the Life Cycle Assessment of Environmental Impact
Critical Success Factors of Green Design Implementation for Malaysia Automotive Industry
Sustainability Manufacturing Assesment using PCA for Thai SME Bus Building Companies
Influence of Slag and Slag Cement on the Strength of Sustainable Concrete
Steel Slag as Neutralization-Adsorption Material for Treatment of Acidic Zn2+ - Containing Wastewater
Engineering Research on ECOSUNIDE Technique for Nutrient Removal from Municipal Sewage
A New Method for Designing the Size of Energy-Storage Capacity in Grid-Connected Wind Farm
Effect of Low Concentration Alkali and Ultrasound Combination Pretreatment on Biogas Production by Stalk
A Solar Array Simulator Using a Buck Configuration for Small Communications Satellites
Design of Photovoltaic Generation Grid-Connected Inverter Based on DSP
A Study of Phase-Locked Technology of Wind Power Generation Three-Phase Grid-Connected Inverter
Research on Heat-Supply Energy Conservation Supervisory Controlling System in the Substation with Peak-Shaving Boiler
The Automatic Energy-Saving Control Strategy for Coal-Fired Boiler Heating System
CAN-Based Monitor and Control Platform for Battery Management System
Reliability Evaluation of Electric Power System Containing Distribution Generation
Research of Torque Control in Large-Scale Wind Turbine
Research on Warship Intermediate Frequency Power System
Technique of Digital Electro Hydraulic Automatic Control of Hydro Mechanical Transmission
Study on Simulation for Solar Heating System for Biogas
Modular Design of Standard Plant Based on Simulation of Architectural Physical Environment
Research on High Temperature Mechanical Properties of Casing in Complex Environment Deep Well
Simulation on Natural Ventilation in Double-Skin Curtain Wall
Analysis on the Applicability and Control Strategies of Using CO2 to Control Fresh Air
Study on Directly Driven Wind Turbine with Permanent Magnet Synchronous Generators (D-PMSG)
Excitation System with Voltage Regulator for Marine-Use Brushless Synchronous Generators
A FLC-PID Controller for Variable-Pitch System of Wind Power Generation
A Novel Bidirectional DC-DC Converter with Robust Control Scheme for Flywheel Energy Storage System
Study on MPPT Control of the Single-Stage Grid-Connected Photovoltaic System
CFD Application on Ventilation System of Hydro-Generator
Analysis of Material and Energy Flow Variation for Energy Saving and Consumption Reduction in Pelletizing Process
Simulation Studies for Doubly-Fed Wind Generator Based on Neural Network Internal Model Control
DFIG Wind Power Generation Based on Direct Two-Stage Matrix Converter
Predatory Search Strategy for Load Distribution of Multiple Chiller Water Units for the Purpose of Energy Saving
A Method for Water Quality Remote Retrieva Based on Support Vector Regression with Parameters Optimized by Genetic Algorithm
Processing Method for the Node of Wind Farm in Power Flow Calculation
Universal-Joint Sun Tracking Method and Tracking Device
A Study on the New Grid Integration Solutions of Offshore Wind Farms
The Design of SCADA System for Wind Farm
Research and Evaluation on Environmental Economic Dispatch Including Wind Farm Based on Relative Entropy Balance
Design of Solar-Wind Complementary Grid-Connected Power Generation Monitoring System for Teaching
A Novel Algorithm for Fast and Adaptive Maximum Power Point Tracking of Wind Energy Generation System
Flow-Structural Coupled Finite Element Analysis of the Monopole Steel Tower under Wind Load
Dynamic Energy of a Large Scale Transmission Tower Subjected to Wind Excitations
Design of the Oil Well Multi-Parameter Monitoring System
Analytical Study on Wind-Induced Vibration of Ice Coating Transmission Line Systems
Impact of Plane Heterogeneity of Sandstone’s Thickness on Water Flooding Effectiveness
A Novel Protection of Transmission Lines for Two ±500kV HVDC Systems Erected on the same Tower
Study on Nitrate-Impregnated Sulfur Dioxide Sorbent Derived from Sewage Sludge
Study on the Effect of Leaching as of Phosphogypsum on the Soil Environment
Variational Data Assimilation for Renewable Wind Energy Predictions: China Inner Mongolia Case Study
Environmental Impact of Waste Slurry in Pile Foundation Construction of High-Speed Railway Bridges and its Countermeasures
Research on Wet-Chemical Deformation of Roadbed Built with Weathered Stone
Spatial Structure of Danwei Compound towards Low-Carbon - Case Study of Space Change in HUST
Advanced Wastewater Treatment under Different Dissolved Oxygen Conditions in an Innovative Step-Feed Process
Application of 3d Time Domain Method for Seismic Soil-Structure Interaction Analysis of Spatial Grid Structure
Differential Absorbance Spectroscopy in Studying Natural Organic Matter Reactivity in Disinfection By-Products Formation: Comparison and Applicability
Allelopathic Effect of Typha Angustifolia L. on Phytoplankton
Study of the Treatment of Coking Wastewater by Biological Nitrogen Removal with Physical-Chemical Process
The Analysis and Applying of Industrial Enterprises Contaminative Source Based on SuperMap GIS
Influence of Decrease in Water Saturation of Host Rocks with Dehydration Reactions on the Reconstruction of the Thermal Evolution of Igneous-Intrusion-Bearing Basins
Edaphic Characterization, Water and Salt Translocation in Saline Marsh at Local Scale in Songnein Plain, Northeast China
Empirical Study on Efficiency Evaluation of Low-Carbon Economy Transition in Resource-Based Cities
Ultrasound Frequency Impacts on the Removal of Indigenous Blue-Green Algae Taken from Lake Taihu
Investigation of Atmospheric Mercury Pollution in Guilin
Land Use Patterns Effect on Soil Anti-Erodibility in Low Mountain-Hilly Region
A Study Method of Ecological Risk Evaluation for Reclaimed Water
Analyses of Impacts of China’s CO2 Emissions Factors Based on STIRPAT Model
Experimental Study on Secondary Effluent Disinfection with Ultrasound and Chlorine
Life Cycle Assessment on Resourceful Utilization System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry
Dried Municiple Sewage Sludge Gasification Experiment in Dual Fluidized Bed
The Measures of Mine Environment Protection and Control in Qinyang, Henan Province
The Research on Effect Factors of the Polymer Flooding in Low Permeability Reservoir of Daqing Oilfield
Chapter 14: Nanomaterials and Nanomanufacturing
Experimental Study of Magnetism Dependence on the Grain Size in some Ferreous Magnetic Nanoparticles
Silver-Coated Zinc Oxide Antibacterial Nanocomposite Preparation and Characterization
Preparation of Nickel Sulfide Thin Films and Nanocrystallites Using Nickel Furfuraldehyde Thiosemicarbazone as Single-Source Precursor
Effect of Hydration-Dehydration Activation on the Basic Strength of Nano Structured Alkaline Earth Metal Calcium Oxide
Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube Using Non-Local Elasticity
Effect of Nano-Silica on Flexural Properties of Epoxy Resin
Rheological and Thermal Behaviour of High Impact Polystyrene Nanocomposite
PVA/Kaolinite Nanocomposite Hydrogels: Preparation Method and Characterization
An Investigation toward the Nano-Crystallization of Fe55Cr18Mo7B16C4 Bulk Amorphous Alloy
Interactions between E18 Rat Hippocampal Neurons and Au-Nanowire Arrays
Chapter 15: Coatings and Surface Engineering
A Theoretical Investigation on the Capillary Model of Lubricant Penetration
Experimental Study of Failure Performances of 51306-Coated Bearings under Lubricant Interruption Condition
Wellbore Stability Analysis of Coal Seam Based on Hoek-Brown Criterion
Design of Methane Polymerization Reactor Temperature Monitoring System
Finite Element Analysis on Stress and Strain of Nickel Electroless Plated Fiber Bragg Grating
Numerical Simulation of Multi-Pass Welding Distortion in Membrane Water-Wall
Research and Realization of Heating Furnace Temperature Control System Based on PIDNN
Primary Study on Overtopping Erosion of Non-Viscous Embankment and Assessment of Discharge through Breach
The Formation Process of Transition Layer of Steel Wire Hot-Dipped Galfan by Sendzimir Process
A Novel Thermal Insulation, Sound Absorption and Decoration Material
Properties of Iron Tailing Coatings on Stainless Steel Substrate
Erosion-Behaviors of the Steel Structure Coating Eroded at Low Erosion-Angle in Sandstorm Environment
Comparison on the Adsorption Thermodynamics of Three Typical Petroleum Hydrocarbons in the Single and Mixed Solution on Aquifer Media
Bioactive Coating on Stainless Steel 316 L through Sol-Gel Method
The Effect of Protective Coatings on the Oxidation Behavior of 6061Al/SiC Composite at High Temperatures
Improvement of Surface Roughness of Al-Si Alloy Cast Strip by Vertical Melt Drag Process
Chapter 16: Biomedical Manufacturing
A Numerical Study on the Characteristics of How Heat and Cooling Transfer on the Leading Edge of a Film-Cooling Blade
Removal of Neutral Red from Aqueous Solution by Pretreated Penicillium Sp
Research on the Mechanical Properties for Medical Stainless Steel
Design and Construction of a Yeast Gene Bayesian Regulatory Network
Research on Conditions of Producing Cellulose by Mixed Fermentation for Bioethanol
Experimental Study of Biological H2S Removal in Biogas
The Research on Dissolving Properties of Biodegradable Cellulose Pulp
Predict Interactions between Protein Residues for Developing Antibody Therapeutics
Experimental Study on Enhanced Denitrification of Microbial and Steel Fuel Cell
New Type of Distributed Biomass Combustion Device Necessity and Feasibility in China
Effects of Indigenous and Exogenous Microbial Inocula on Dynamic Changes of Enzyme Activities during Composting in a Bioreactor
Measurements of Final Volatiles Yield of Biomass Devolatization at Flash Heating Rate
Affect of Assimilable Organic Carbon (AOC) and Phosphorus to Heterotrophic Microbial Growth in Drinking Water Distribution System
Utilization Biomass from Bagasse Ash for Phillipsite Zeolite Synthesis
A Critical Analysis on Efficacy of Clinical Decision Support Systems in Health Care Domain
Marginal Adaptation of Cast Metallic Dental Crowns Using Microplasma Welding Procedures
Visual Evaluation of Cast Dental Alloys Welds Discontinuities in the Field of Fixed Prosthodontics
Fabrication and Characterization of Injectable Biomaterials for Biomedical Applications
Chapter 17: Manufacturing Process Planning and Scheduling
Manufacturing of Multifunctional Nanocrystalline ZnO Thin Films
Faults Evaluation Method Based Fuzzy Theory in Distribution System
Research on Photovoltaic Grid-Connected Generation System
The Research and Development of NTC Automatic Tool Selection Based on Aucol
Study on the Power Control Method of a Stand-Alone Wind Energy System Based on DSEG
The Design of the Supervisory System Based on the SOPC
Parallel Best Neighborhood Matching Algorithm on PC Cluter Platform
Research of Roll-Isolated Gimbal Platform and a Two-Position Initial Alignment Scheme of SINS in Spinning Projectile
Power-Fail Detection and Data Storage Design for Control System
A PSO Weighted Estimating the Mean Downstream Demand to Mitigate the Bullwhip Effect in a Supply Chain
Rough Sets Based Simplified Analysis of Energy Loss Indicators in Power Plant
Modeling of Fuel Supply for Ethanol-Gasoline Engine Based on Fuzzy PID Control
Cooperative Area Coverage Reconnaissance Method for Multi-UAV System
A Research on Ultrasonic Range Finder Based on Encoding Technology
The Control Strategy Of V2G Participating in Peak Regulation in Power System
Geometric Distortion Correction of Geothermal Field Hyperspectral Remote Sensing Images in Lintong, Shanxi
The Case Study for Diversity in Nuclear Plant Instrument and Control System
Adaptive Full State Hybrid Function Projective Lag Synchronization in Chaotic Continuous-Time System
Canal Reach Deformation Monitoring Technology Based on Terrestrial LIDAR Scanning Technology
Applying Skill Technology to Aid Cadence Allegro Part Management
Research on Fuzzy Control System of the Water Level for Steam Generator
Feedback Synchronization of Uncertain Chen Chaotic System
The Multi-Humiture Monitoring System for General Storehouses
Transient Model of Short Circuit Fault on Subway Traction Power Supply System
Vibration Characteristic Analysis of Hoist Cage Excited by Steelwork Defects
SINS Installation Error Calibration Based on Multi-Position Combinations
Investigation of G4-73 Centrifugal Fan Airfoil Stall Characteristics
Hand Flat Knitting Machine Speech Counter System Design - Based on Single-Chip Microcomputer
The Leak Detection System of Air-Conditioning Pipeline Based on LabVIEW
Traffic Engineering for Provisioning Hose Model VPNs with Delay Requirements
Automatic Control System for the Process Parameters of the Soakage Agent in Glass Fiber Production
Numerical Simulation Study on BF Raceway
Attitude Control of Spacecraft Multibody System by Optimal Nonholonomic Motion Planning
Wireless Monitoring System for Mechanical Equipment Based on Multi-Agent Technology
Automatic Body Control Model Experimental Platform Design Based on CAN-Bus
The Study on Optimal Location of Mine Materials Distribution Center with GPS
Study on Reliability Analysis of Distributed Control System of Nuclear Power Plant
Research on the Whole Process Cost Control Methods of the Chemical Piping Engineering
Research on the Digital Design and Manufacture Technology in the Manufacturing of Titanium Alloy Cranial Prosthesis
Construct an INLP Mathematical Model to Solve the Two-Sided Assembly Line Balancing Problem of Type-3
Development of the Full-Digital High Voltage Power Supply for Electronic Beam Welder
The Application of Classification and Regression Trees Algorithm in the Production Data of Mounter
Scheduling the CAN Bus with Rate Monotonic Techniques
The Measurement and Process of Aeroengine Inlet Total Pressure Field
A Study on Double-Stage Fuzzy Control of Drum Level in Waste Heat Boiler
Implementation and Application of Mapping between IEC61400-25 of Wind Farm and Web Services
Individual Pitch Regulation for Wind Turbine
Simulation of Internal Arcing in High Voltage Switchgear Based on Fluent
Modeling and Control of a Flexible Input Boost Chopper Linked to AC Drive System
An Intelligent Monitoring System for Agriculture Based on Zigbee Wireless Sensor Networks
Accurate Detecting Method for Fractional Harmonic
A Nonlinear Compensation Approach for the Iron-Core Coils Based Electronic Current Transformers
A New Practical Fault Location Algorithm for Two-Terminal Transmission Lines
Control Limitations on Static Unstable Airframe Using Two-Loop Acceleration Autopilot
Distributed Control System of Line Reactive Power Optimization for Rural Power Network Based on Improved TS Algorithm
A Frequency-Domain Identification Algorithm for MIMO Fractional Order Systems with Time-Delay in State
Control of a Fractional-Order Arneodo System
Similarity Laws of Distorted Model with a Movable Bed and its Validity
A Novel Speed Sensorless Control of Brushless DC Motor in Position Servo System
Crane Mechanics Crack Growth Life Analysis Method Research Based SIF Amplitude Fitting
Remote Video Monitoring and Controling System Based on Web Services
The Research of MAC Protocol Based on Fire System for Wireless Sensor Networks
Dynamic Inversion Guidance Law for a Hypersonic Vehicle
An Ultra-Wideband Antenna for Mobile Handset Applications
Neural Network with High-Dimension Multi-Input Layers Based on Production Control and its Application
Research on Numerical Simulation of Gas Storage Field in Aquifer Based on Fully Implicit Method
Electrical Energy Saving Based on Production Process Optimization for Steel Enterprise
Processing Load Signal on Wheel Loader Transmission
Research and Development of a Test Platform for Synthetic Performance Parameters of Linear Motors
The Development of Monitoring System in Breeding Center Based on Wireless Sensor Net
A New Landslide Forecast Method and its Application in an Opencast Coal Mine
Progresses on Production Techniques of Gas Hydrate Slurry
Study on Upgrading and Further Usage of Glycerol from Waste Water
A Comparison of Rotational Speed of Marine Current Power-Generation Turbine with and without a Speeding-up Inlet
Preparation of FeO Nanofluid and its Enhancing Mass Transfer Performance
Data Envelopment Analysis and Malmquist Productivity Index for Measuring Group Performance on Interval Data
Fuzzy Available-to-Promise System Modelling under Supplier Uncertainty
The Analysis of Natural Characteristics of Pipeline Structure Systems Based on Frequency-Domain Transfer Matrix Method
Study on the Repair Methods Responding to Disturbance during Production Scheduling
The Position and Role of MES in the CSG Information System
Mature Using and Innovation of Economic Management in Material Flow
Hybrid Iterative Local Search Heuristic with a Multiple Criteria Approach for the Vehicle Routing Problem
Total Productive Maintenance - Accelerating OEE in a Manufacturing Industry Leveraging Pervasive Technologies
Effect of Cutting Fluid Supply Strategies on Surface Finish of Turned Parts
Research on the Safety Evaluation Method of Railway Operation System
A Review of Metaheuristic-Based Product Concept Generation Systems
Research and Realization for the System of Coal Mine Ventilation System
Hybrid Method for Solving Flexible Open Shop Scheduling Problem with Simulated Annealing Algorithm and Multi-Agent Approach
Tackling Means for Balancing the Production Lines
Control of Crisis Environments by the Use of WSN Structures and Based on Expert-SOA Architecture
An Analytical Approach to Ring Rolling Using Modified Slab Analysis
Fundamental Necessities of Knowledge Management in Project Based Firms
Failure Prevention on Application of Flexible Printed Circuits
The Impact of Using Data Warehouse on Manpower Employment Decision Support System
Web Application for Virtual-Making of Cost Domain in Process of Civil-Project E-Management by Suggestive Algorithms
Chapter 18: Joining Processes
Parametric Optimization of TIG Welding on 316L Austenitic Stainless Steel by Grey-Based Taguchi Method
Investigations on Fume Formation Rate in Shielded Metal Arc Welding Process Using Different Electrodes
Corrosion Behaviour of Electron Beam Welded AISI 304 and AISI 4140
Influence of Intermetallics Modification by Melt-Shearing Treatment on Mechanical Properties of Iron-Containing Al-Si-Mg Casting Alloy
Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
Development of Defect Free Monel 400 Welds for Marine Application
Effect of Electrode Coatings on Diffusible Hydrogen Content, Hardness and Microstructures of the Ferritic Heat Affected Zones in Bimetallic Welds
Design and Simulation of Infrared Absorption Based on Hydrogenated Amorphous Silicon Thin Film
Modeling and Simulation of a Vehicle Equipped with Power Split Automatic Transmission
Chapter 19: Modeling, Analysis and Simulation of Manufacturing Processes II
Multi-Objective Optimization Analysis of Motor Cooling System in Articulated Dump Truck
Reactive Power Optimization Based on Improved Particle Swarm Optimization Algorithm Considering Voltage Quality
Thermal Analysis and Test for a High Speed PM Machine for Fan Application
A Load Shedding Scheme for Long Term Voltage Stability Enhancement by Multi-Stage Model Predictive Control
The Design of Data Transmission for New Intelligent Layered Water Injection Regulating and Testing System
Vibration Reducing Analysis of Beam String Structure with Seismic Isolation Bearings
Noise Reduction Using Wavelet Transform in Ultrasonic Flaw Detection of Small-Diameter Steel Pipe with Thick Wall
Analysis and Optimization Design of Self Magnetic-Suspension Permanent Magnet Linear Synchronous Motor
An Improved Particle Swarm Optimization Approach for Temperature Control in HVAC for the Purpose of Energy Saving
Analysis of Precision Reliability for CX Series of Five-Axis Turning-Milling Center
Orthogonal Experimental Design Applied in Analyzing Factors Influencing on Heat Transfer Performance of Engine Cylinder Head
The Turbine Machine Fault Prediction Based on Kernel Principal Component Analysis
Research on SSO Caused by HVDC Based on Eigenvalue Analysis
Vehicle Model Recognition Based on Fuzzy Pattern Recognition Method
Structure and Finite Element Analysis for a Permanent Magnet Bias Axial Magnetic Bearing
Glare Prediction Method Based on SPEOS Simulation for Civil Airplane Flight Deck
Automatic Position Dependent Simulation for Robust Smart Grid
Analysis and Research on Optimization of Multi-Threading Load Balance under Multi-Core Architecture Based on OpenMP
Study on Dynamical Modeling of the Rolling Mill Vertical System
Development and Realization of Air Flow On-Line Monitoring System in Utility Boiler Based on AC Induction
Distributed Contact Model for Indeterminate Grasp Force Analysis towards Heavy-Duty Manipulation
Numerical Simulation of Low-Current Vacuum Arc Plasma
Research on the Energy Efficiency Test System of the Induction Motor
Skew and End-Teeth Optimization in Reduce Permanent-Magnet Linear Synchronous Motor Normal Force Fluctuation
Precision Analysis of Simulation Systems with Hardware-in-Loop Caused by Performance of Three-Axis Virtual Flight Motion Simulator
Calculation and Analysis of Electrical Field in Valve Side Winding of Converter Transformer
Chapter 20: Metrology and Measurement
The Theoretical Study and Error Analysis about On-Site Calibrating Technology of Low-Voltage Metering Device Composition Error
Torque Ripple Reduction of Brushless DC Servo Motor Using Full EMF Feedback
A Technology of Composite Real-Time Image Processing of Profile Measurement
Applied Research on the Electric Wet Effect in Optical System Design
Influence of Pulsed Power Equipment’s Driving Manners on Launching Process of the Electromagnetic Coil
Online Calculation Method of Boiler Efficiency by Oxygen Measured at a Wet Basis
Study on Automatic Test of the High-Precision I/F Converter
The Research of Data Acquisition System about Flow Test in down Hole
Numerical Analysis of Minicar Radiator Flow Resistance
Wet Gas Flow Metering Based on Differential Pressure and BSS Techniques
Research on Online Monitoring of Gear Fault of Wind Power Gearbox Based on Undecimated Wavelet Transformation
A Stator Flux Estimation Method Based on Duty Cycles of Inverter Switching

Acanthopanax senticosus Harms Intelligence Quality Assessment Based on Core Data
Fractal Analysis of Soil Profile Roughness
Research on the Electronic Strain Piezo Gauge Based on the Shell
Experimental Investigation on Air-Solid Two-Phase Mixture Discharge under AC Voltage
High-Accuracy Fundamental Frequency Detection in Power System
The Design of Microwave Cavity Resonator Used for Measuring the Moisture Content in Plant Leaves
Software Development and Data Processing of Tool Wear Based on Mapping Measurement
Integration of Neural Network and Symbolic Inference and its Application to Detection of Foundation Piles
A Traffic Flow Detection Algorithm in the Intersection Electronic Police System Based on Video
Measurement Technology Research on Target and Projectiles’ Miss Distance Based on Digital Image Processing
Prediction Method of Coal Fracture Based on Failure Approach Index and Hoek-Brown Criterion
An Ice-Detecting and Ice-Melting System of Electricity-Transmitting Lines Based on ZigBee Wireless Communication
Fault Diagnosis Method in Controlled Rectifier Based on Support Vector Machines
Temperature and Humidity Measurement System for Grain Storage Based on nRF905
Measurement Research on Magnetic Properties of Electrical Steel Sheet under DC Bias Conditions
The Short-Term Load Forecasting Based on Rough Set
Fast Motion Estimation Algorithm Based on Real Time Monitoring
Measurement and Analysis on Power Quality of Electric Railway Traction Substation Based on LabVIEW
Development of a Capacitive Displacement Sensor Based Portable Instrument with Digital Display for Measuring Weld Stagger Joint
A Fault Diagnosis Method Based on Improved Grey Correlation Grade for Turbine Generator Unit
Hand-Eye Calibration of a Robot-Based Inspection System
Asynchronous Motor Bearing Fault Detection Methods
Actual Motion of 3-DOF Parallel Robot
Influence of V/Hz Limiter on Generator in Isolated Operation
Study on Cable-Stayed Bridge Flutter Active Control by a Single ADM
Numerical Improvements to Closed-Loop Ascent Guidance
Twelve-Position Calibrating Method without North Using for Three-Axis Magnetic Sensor
Study on SRUKF Applied in Initial Alignment with Large Misalignment Angle on Stationary Base of SINS
Fault Monitoring of Transformer Based on FTIR
Study on Generation of Digital Micro-Fluids Based on Surface Acoustic Wave
The Generation of Droplets with Micro-Liter Volume Using Surface Acoustic Wave
Low Bit Rate Speech Coding Using Lattice Vector Quantization and Time-Scale Modification
Two-Dimensional Body Untouched Measurement System Research and Developing-Based on Sunplus SPCE3200
The Design of DC Motor Excitation Regulation System Based on DSP
A Simulation Software of Critical Sour Well Blowout Based on FLUENT
Research of Precision Injection Control System Based on the on-Line Measurement of Polymer Melt Density
Based on Time Series Prediction of Photovoltaic Power Plant Output
Study on Piezoelectric CeramicType Insole Plantar Pressure Measurement System Based on Test Point
Research on the Type of Electrical Contact at Metal-Insulator Interface
Wavelet Analysis of Natural Annual Runoff in Dongjiang River
Design of Ultrasonic Gas Temperature Measurement System with Humidity Self-Correction
Measuring the Shielding Effectiveness of Small Enclosures
Fuzzy Controller Design Used for Steel Length Measurement
Development of a 3D Vision Coordinates Measurement System Using Planar Target
An Instantaneous Measurement Based Transformer Protection Scheme
A Robust Feature Points Matching Algorithm in 3D Optical Measuring System
Fault Position Identification for Series Compensated Lines with SSSC Based on Improved Wavelet Packet Entropy
A Novel Four-Step Commutation for Bidirectional Switch Cells of AC-AC Matrix Converter
Design and Experimental Analysis of Novel Refractometer Based on Photoelectric Sensor Technology
Optimal Level Flight Trajectories of Stratospheric Airship
Research on Fiber Bragg Grating Sensor Monitoring Method for Dynamical Stress of Centrifugal Blower Vane
Finite Element Analysis of Magnetic Field Modulation Effect of Brushless Doubly Fed Machine
Magnetic Levitation Permanent Magnet Linear Synchronous Motor Electromagnetic Analysis
Meshing Theory of New Epicycloids Gear Drive
Maximum Adhesion Control of Railway Based on Sliding Mode Control System
Three Parametric Model Third-Order Software Phase-Locked Loop and its Application in Range Measuring System
A New Real-Time Gas Well Productivity Evaluating Method
Estimating the Threading Dislocation Density of Thick GaN Films
Analysis of Ramp Estimation Algorithms in Automatic Transmission
Transient Combustion and Hydrocarbon Emission Characteristics of a Port-Fuel-Injected Engine
Field Analysis of Ridged Waveguides USING TRANSFER MATRIX
The Software Design of a Gas-Liquid Separation and Metering System
Acquirement of Melon Morphologies through High-Precision and Non-Destructive Vision Measurement
Study of Wireless Torque Measurement System Based on CC2500
Soot Mass Flow Measurement System Using Triboelectricity and Ultrasonic
A New Method to Measure the Transmittance of Filter
Vibration Signal De-Noised by Alteration Wavelet Transform under Alpha Stable Distribution Environment
Reliability Evaluation of Electromagnetic Flowmeter Based on Entropy Weight and Fuzzy Theory
Traveling Wave Current Polarity Comparison Protection Using Wavelet Modulus Maxima for HVDC Transmission Lines
The Correlation between MSCT for Lung Volume and Airway Measurements and Pulmonary Function Test
System for Detecting the Defects of Steel Tubes Based on Electromagnetic Acoustic Technology
Wind-Driven Natural Ventilation in an Areaway-Attached Basement with a Single-Sided Opening for Residential Purposes
A Soil Sampling Method Based on Field Measurements, Remote Sensing Images and Kriging Technique
Study on the Measurement Method of Soil Surface Roughness
Design of a Hybrid Adaptive CMAC Tracking Control for a Class of Uncertain Chaotic Systems with only Output Measurement
Analysis of Drinks Base Concentration Using Microprocessor Based Sensor
An Innovative Drive Train Design for Improved Dead Reckoning Accuracy in Automated Guided Vehicles
Computational Models for the Static and Dynamic Analyses of Laminated Composite Plates
Buckling Analysis of Functionally Graded Super Elliptical Plate Using Pb-2 Ritz Method
A Study of the Vehicle Structure Crashworthiness in Dolly and Curb-Trip Rollover Tests
A Comparative Study on Vortex Transmitter versus Differential Pressure Transmitter for Flow Control
Developing Uniaxial Tensile Test as an Alternate Method for Thermo Mechanical Process Evaluation
Experimental Test of Magneto-Rheological Directional Control Valve
From Topological Views Observe Collision Phenomenon in F1
The Use of Mixture of Piper Betle and Green Tea as a Green Corrosion Inhibitor for API X-52 Steel in Aerated 3.5 % NaCl Solution at Various Rotation Rates
Thermal Comfort Assessment in a Closed Air Conditioned ICT Laboratory at Ungku Omar Polytechnic, Malaysia
A Study on the Effect of Different Median Barrier Shapes in Presence of Single or Parallel Noise Screens
Chapter 21: Nontraditional Manufacturing
Dynamic Topology Optimization for ATP Hanging Beam of EMU Bogie Based on Hyperworks
Multi-Sensors Information Fusion Based on Momentis Method and Euclid Distance
Detoxification of Wheat Straw Formic Acid Hydrolysis and Xylitol Production
Image Calibration and Correction for a Fisheye Lens
Mixed-Oxide Sorbent for Moderate-Temperature Removal of Carbonyl Sulfide
Research on Electric Linear Compressor for New Energy Vehicles
Whole Transfer Matrix Method for the Critical Speeds of Skew Gear Transmission System
Research of Replica Management Technology of Resource on Manufacturing Grid
Design of Building Heating Supply Energy-Saving Control System Based on Information Fusion
Research on Anti-Felting Finishing Process of Wool Knitted Fabric with Protease
Comparison of the Computing Method for the Radial Temperature Difference of a Supercharged Boiler Steam Drum Shell Based on the Approximate Solution and the Current Chinese Standard
The Study on Ergonomics-Based Design of Flood Survival Kit
Dye-Sensitized Solar Cells Based on Novel Mixed Dyes
Soft Magnetic Composite Switched Reluctance Generator - Fabrication and Analysis
Fabricating Anodic Aluminum Oxide by Anodic-Oxidation
Chapter 22: Computer-Aided Engineering in Manufacturing
Permanent Magnet Biased Bearing of Suspension System
Heat Exchanger Optimization Analysis of Aircraft Environmental Control System
The Excitation Controller for A Synchronous Generator Based on Nonlinear Optimal Control
RLV Attitude Control System Design in Reentry Flight Phase
An Experimental Investigation of Flow Characteristics Downstream of Discrete Film Cooling Holes on Turbine Blade Leading Edge
Research on Rotation Vector Algorithm in Untypical Conic Motion
Design of Three-Dimensional Wireless Power Receiving Coil for MEMS
Design of Control System Based on PLC for Polycrystalline Silicon Decomposition Furnace
Realization of Active Vibration Control on Piezoelectric Intelligent Flexible Beam
A Design of TRT Hydraulic Servo Controller Based on DSP
Field Test and Numerical Simulation of Cracks in the Box Girder of Long-Span RPC Bridges
A Novel Speed-Sensorless Suspension Decoupling Control Strategy for Bearingless Motor Based on Linear Extended State Observer
Study on B/S-Based Remote Fault Diagnosis System of Radar Equipment
Turn Rate Estimation Based Adaptive IMM Algorithm for Maneuvering Target Tracking
Modeling and Simulation of Helicopter Cabin Electromagnetic Environment
Tubular Permanent Magnet Linear Synchronous Motor Thrust Fluctuation Optimization
Kalman Filter-Based Orbit Determination with Dynamic Model Compensation for a Maneuvered GEO Satellite
A Vibration and Movement Coupled Modeling Approach of 3 DOF Flexible Joint Manipulators
Tubular Permanent Magnet Linear Synchronous Motor Thrust Optimization
Multi-EKF Localization Algorithm for Multi-Robots Formation Navigation
Wind Speed Prediction Model Based on Radial Basis Functional Neural Network
The Design of PLC SOC Controller by Dual-Core Mutually Exclusive Processor
Investigation of Strength in G4-73 Type Centrifugal Fan Impeller
Portable Intelligent Gas Monitor System Design - Based on Sunplus SPCE061A
Finite Element Analysis of Drive Axle Housing Based on the Solid Element and the Shell Element
Numerical Simulation of Covered Culvert at Jinan Section in South-to-North Water Diversion Project
Control Simulation Study Based on Recurrent Generalized Congruence Neural Network
On Current Situation and Development of our Industrial Automation Control Technology
Cascaded Control Allocation in Overactuated Aircraft via Mixed Optimization
Design and Research of a PMLSM-Driven Elevator Door Machine
Pyramid Histograms of Orientated Gradients for Product Image Retrieval
A Review of some Intelligent Optimization Algorithms Applied to Intelligent Transportation System
Velocity Servo Design of Auto-Disturbance-Rejection Controller for Permanent-Magnet Synchronous Motor Servo System Based on Feedforward Compensation Controller Including Sliding Mode
Simulation of a Regenerative Braking System Producing Controlled Braking Force
Research on the Cutting Path Planning of Shearer Based on Expert System
Particle Swarm Optimization with Team Spirit Inertia Weight
Design of Intelligent Rehabilitation Crutch Based on Accelerometer
Method of Controlling Inverted Pendulum Based on Fusing Genetic Algorithm and Neural Network
Research on Error-Tolerant Model of Master Control Computer for Electronic Automation System
Parameters Design of Main Circuit of AC Constant Voltage Power Supply Based on Dual Directional Reversible PWM Control
CFD Simulation of Mixing Effects in Gas-Liquid-Solid Stirred Reactor
The Research on Application of AT-DESIGN-Based Textile CAD/CAM System
Optimal Orthogonal Design for Herringbone Wells Injection and Production Parameters of Steam Stimulation in Heavy Oil Reservoir
A Nonlinear Controller for PMLSM Control System Based on Tracking Differentiator
Sliding Mode Variable Structure Control Design for a Kind of Nonlinear Discrete Singular Uncertain Systems with Time-Delay
An Integrated Design and Fabrication Approach for Heterogeneous Objects
Compressed Sensing Recognition Algorithm for Sonar Image Based on Non-Negative Matrix Factorization and Adjacency Spectra Feature
Research on Reactive Power Compensation Control System Based on Dual-CPU Mode
Optimization Design of F355 Automatic Feed Mechanism Based on ADAMS
Research and Implementation of Folding Machine Control System Based on MPU
Optimization Problem of Maintenance Resources Allocation Based on Partical Swarm Optimization
Simulated Programming Characteristics of Stacked-Gate Flash Memories with High-k Tunnel Dielectrics
The UML Model for Access Management System of Intelligent Warehouse Based on RFID
Chapter 23: Meso/Micro Manufacturing Equipment and Processes
Characterisation of Microstructure, Mechanical Properties and Corrosion Behaviour on GTA Welded AISI 310 and Inconel 800
Grain Refinement through Warm Rolling of Wedge-Shaped Low Carbon Steel
Design of S-Band Oscillators by Using GaAs ED02AH 0.2-µm Technology
The Effect of Magnesium to Sulfur Ratio on the Graphite Morphology of Graphite Cast Iron Produced at Differrent Section Thicknesses
Microstructure and Toughness Properties of Subcritically, Intercritically and Supercritically Heat Affected Zones in X80 Microalloyed Pipeline Steel
Fatigue Life Analysis of the Stabilizer Anti-Roll Bar Using ANSYS
Research of Wind Power into the Grid Based on Large-Capacity Parallel Converter Modules
Investigation of a Plasma Jet Generated by High Voltage Discharge at Atmospheric Pressure
The Research of Air Purification under Complex Electric Fields
Design of Mining Portable Static Resistance Strain Gauge Based on ATmega16L
Design of Smart Car Servosystem Based on Camera
Probabilistic Harmonic Load Flow Calculation Containing Doubly Fed Induction Generator
Fixed Frequency Hysteresis Control Based STATCOM
Parameter Identification of PMSM Based on Windowed Least Square Algorithm
Research on Control System of Gearless Permanent Magnet Synchronous Traction Elevator
Analysis of Stator Resistance Effects in Carrier Signal Injection Based Sensorless Control of Permanent Magnet Synchronous Machine
Study of Direct Torque Control Technique on High-Capacity Motor Drives
Second Order Sliding Mode Control of Direct-Drive Ring Permanent Magnet Torque Motor
Fuzzy Adaptive Control of Airborne Electro-Optical Tracking Systems Based on Variable Universe
Series Charge-Discharge Management for LiMn2O4 Power Batteries
Wireless Power Transfer Systems via Strong Coupled Magnetic Resonances — Design, PCB Implementation and Tests
The Maintenance Strategy of Electric Equipments Based on the Least Average Annual Cost
Improved Structural Design and Digital Control System for Micro-Machined Tuning Fork Gyroscope
The Design of the Detonator Wick Resistance Auto-Stripping Detector
Application of Thyristor AC Voltage Regulation Technology in ICP Spectrum Excitation Source
Application of Genetic Algorithm Based on Real Number Encoding to Optimization Design for Rolling Schedule of Tandem Cold Rolling
A Fridge Compressor Control System Based on MC56F8013
Compound Speed Control of Ultrasonic Motor Using Two Variables
Experimental Study on the Effect of Gas Composition Variation on Engine Emissions
Performance Analysis for Elliptical Tube Longitudinal Vortex Generators
Characteristic Analysis of Ceiling Radiant Heating of Capillary Tube
Study of the Pressure Distribution between the Piston Rings in Reciprocating Compressors
Preparation and Application on High-Efficiency Catalyst for Catalytic Wet Oxidation
An Approach for the Numerical Computation of the Reduction of the Original Porosity due to Diagenetic and Compaction Processes in Sandstone Reserviors
Influence of Packing form on Performance of Electrodeionization Process for Removal Ni2+ from Synthetic Wastewater
Design of a Portable Solar Photovoltaic-Driven Refrigerator
Study of Gasoline Engine Waste Heat Recovery by Organic Rankine Cycle
Stability Analysis of Single-Track Railway Long Span Combination Bridge of Arch and Beam
Effects of Spark Advance Angle on Combustion and Emission Characteristics of a Compressed Natural Gas Engine
Removal of Trivalent Chromium ION in Wastewater by Zeolite 4a
The Technique of NOx Emission Control in 1000 MW Thermal Power Unit Boilers
Comparative Study on Schemes of Seismic Response Reduction for the Railway Extradosed Cable-Stayed Bridge
Pure Working Fluid Selection for the Organic Rankine Cycle in Waste Heat Recovery of Diesel Engine
Effects of Engine Operating Parameters on Lean Combustion Limit of Hydrogen Enhanced Natural Gas Engine
Heat Sink Matching for Thermoelectric Generator
Experimental Study on the Start Process for Compressed Natural Gas Engine
Experimental Study of Cooling Tower Packing and Deduce the New Formula of the NTU
Study on Preparation of Super Clean Coal with Selective Flocculation-Flotation Technology on Taixi Anthracite
Study on Mechanism of Action of Catalysts on Liquefaction of Bagasse Alkali Lignin
Study on Propylene Recovery in a Dispersed Absorption System-(Water-in-Oil) Emulsion System
Design of a High Performance IMP Motor for Machine Tool Applications
The Research of China Solar Water Heater Industry
Emission Performance of a Diesel Engine with Pressure-Wave Supercharger
Stability Analysis of Water-Based Nanofluids Prepared by Using Supersonic Dispersion Method
The Location Effecting of the Braces to the Lateral Displace of the Steel Frame Using the Time History Analytical Method
Pressure Forecast of an Air-Cooled Steam Condenser under Wind Speeds
Development and Research on a Hermetic Horizontal Oil-Injected Scroll Compressor for Recovering Casing Gas
Experimental Research on Improvement of the Heat Pump Air-Conditioner and Hot Water System
Experimental Study on Degradable Organic Wastes by Catalytic Hydrothermal Degradation
Research on the Flow Character of Regenerative Heating Furnace Affected by the Switching Model
Control Techniques for Uni-Axial Continuous Laser Fabrication
Chapter 24: Laser Based Manufacturing
Laser Welding Simulations of Stainless Steel Joints Using Finite Element Analysis
Effect of Peclet Number on the Thermo Capillary Convection and Molten Pool Shape Formation during Laser Welding Using CFD
Heuristic Model for Dynamic Single Machine Group Scheduling in Laser Cutting Job Shop to Minimize the Makespan
Functional Testing of Direct Metal Laser Sintered (DMLS) Components for Automotive Application
An Investigation on the Effect of Pulsed Nd:YAG Laser Welding Parameters of Stainless Steel 1.4418
Evolution of Direct Selective Laser Sintering of Metals
Effect of Defocusing on Bead-on-Plate of Ti6Al4V by Yb:YAG Disk Laser
Investigation on Porosity Content in 2024 Aluminum Alloy Welding by Yb:YAG Disk Laser
Germanium-Silicon Quantum Dots Produced by Pulsed Laser Deposition for Photovoltaic Applications
Laser Scanner Stage Synchronization Method for Ultrafast and Wide Area Fabrication
Optical Power Optimization of the Single Mode Vertical Cavity Surface Emitting Lasers by Two Oxide Layers
Growth and Characterization of ZnO Thin Films Grown by Pulsed Laser Deposition
XPS Analysis of ZnO Thin Films Obtained by Pulsed Laser Deposition
Semiconductor Lasers Based on the Orthogonal Dual Gloss Meter
Three-Photon Excitation Fluorescence Lifetime Imaging Using Time-Correlated Single Photon Counting Method
Research on Laser Damage to IR Guidance Anti-Ship Missile Detectors
The Analysis of Turntable Error and Arithmetic Design for North-Finder Based on Rate Biased RLG
Laser Doppler Velocimetry Signal Processing Based on Spectral Refinement and Correction
Planning Strategies for Surface Hardening by Laser Robot
Single-Frequency Nd:YVO4 Green Laser Using Two Brewster Plate
Chapter 25: Rapid Manufacturing Technologies
Study on Influencing Factors of High-Temperature Rapid Molding Product on the Rehabilitation of Mold Cavity
Nondestructive Testing Analysis of Reinforced Protective Cover Thickness
Placement Sequence Methodology in Pallet Pattern Formation in Robotic Palletisation
Design and Rapid Manufacturing Structural Components of a Mini-Scale Underwater Vehicle
Integrated Multi-Robotic Assembly Planning for Improved Productivity
Improving Equipment Effectiveness by Designing Optimal Production Process
Chapter 26: Modeling, Analysis, and Simulation of Manufacturing Processes III
The Electromagnetic Analysis of the Magnetic Bearing Using the Finite Element Method
Numerical Simulation of Failure of Overburden in Coal Mining under Reservoir
Feasibility for the Application of the Temperature Difference Computing Method Based on the Simplified Solution of the Radial Temperature for a Boiler Steam Drum Wall to a Supercharged Boiler
Modification of Nano-Titanium Dioxide Film and Processing Experimental Study of Tannery Waste Water
Study on Reliability of Structure with Energy Dissipation Dampers
Application of AHP on the System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry
Absorption of Sulphur Dioxide from Flue Gas with Sodium Alkali Solution in Packed Columns
Design of the Liquid-Cooling System for High Power LED Modules Using Taguchi Analysis
Hybrid Desiccant Cooling System Using Condensing Heat as the Regeneration Source. Part I: System Model
Fractal Theory’s Investigation in Pneumatic Flocculation Process
Hybrid Desiccant Cooling System Using Condensing Heat as the Regeneration Source. Part II: Energy Saving Potential
Experimental Study of Oil-Gas Cyclone Separator Performance in Oil-Injection Compressor System
Study of Process Industries Strategic Environmental Assessment Matrix Model Methodology Based on the Decision-Making Integrated
Simulation of EM Scattering from 3-D Target by MOM with Pulse Basis Function
Electrically Induced Reduction of Trichloroethene in Water
Numerical Simulation Research on Louver Fin in Air Conditioning for Cars
Nonlinear Buckling Analysis of Wind Turbine Towers
Thermal Performance Analysis for a New External Wall Insulation System
Variable Step-Length Efficiency Optimum Control of Traveling Wave Ultrasonic Motor System
Experiment and Simulation on Coarse Slime Recovery by Water Medium Fluidized Separator
Research and Implementation of Intelligent Control of Energy Saving and Emission Reduction in Electric Bicycle
The Simulation Research on the Performance of Chevron-Type Corrugated Plate Heat Exchanger
Research on Structure Design and Performance Test of Electromagnetic Shielding Clothes
The Pure Heat Conversion Coefficient Analysis Method for Thermodynamic System of Advance Boiling Water Reactor Nuclear Power Unit
Study on the Response of Stud Shear Connectors Subjected to Different Loading Rate
The Resource Characteristics of Marine Gas Hydrates and the Assessment of its Exploitation Technology
Numerical Simulation of Air Distribution in the Series-Type Electrostatic Fabric Filter Precipitator
Three-Dimensional Simulation of Gas-Solid Flow in the Biomass Circulating Fluidized Bed Gasifier’s Riser
The Influence of Arrangement of Gas-Fired Radiant Heaters on Energy Saving in Subway Coach Garages
Experimental Study on Modified Model of Indoor Bio-Aerosol Dispersion
Simulation and Optimization of Domestic Wastewater Nutrients Removal Process: Vfas as External Carbon Source
The Optimization of Operation Characteristics for Finned Heat Pipe Radiator in Concentrating Photovoltaic System
Modeling and Numerical Simulation of Dehumidifier Using LiCl Solution as the Liquid Desiccant
Study on Simulation Model of Hydrothermal-Treatment of Degradable Organic Wastes
Modeling and Simulation of Selective Catalytic Reduction for Flue Gas Denitration in Power Plants
Research on Construction Safety Evaluation Based on Fuzzy-Set Pair Analysis Model
The Numerical Simulation Analysis of Excavation Process of Loess Tunnel
Performance-Based Seismic Design Approach for High Speed Railway Bridge
CFD Simulation and Retrofit of Natural Ventilation in a Steel Workshop
Analysis and Optimization of ORC for Low-Temperature Waste Heat Power Generation
The Simulation Study on Buried Ground-Source Heat Pipe Transient Temperature Field Distribution
Random Heat Temperature Field Model Analysis on Buried Pipe of Ground Source Heat Pump
Design and Realization of Mine Water-Inrush Visualization Simulation System
Model Test Research on the Pile Stress by Pseudo-Static Test of Pier-Foundation-Structure System
Analyze on the Treatment Schemes and Effects of Dynamical Pressure Roadway in Coal Mine
Dissolved Oxygen Convection and Diffusion Numerical Simulation of Water and Air Mixture Flow in Circular Pipe
Numerical Simulation on Process of Flow and Heat Transfer in Upright Magnesium Reducing Furnace
The Hysteretic Behavior of Fiber Beam Element Model of Reinforced Concrete for Dynamic Explicit Analysis
Simulation of Flows Near a Groin in a Straight Open Channel with Effects of Streamline Curvature
An Intelligent Process Model for Manufacturing System Optimization
Neural Network Based Modeling in Wire Electric Discharge Machining of SiCp/6061 Aluminum Metal Matrix Composite
Kinematic Modeling and Analysis of a Multifingered Robotic Hand
Study of Effect of Geometry Parameters on Piezoelectric Cantilever by Modal and Harmonic Analysis
Modeling and Optimization of Wire Electrical Discharge Machining of Cold-Work Steal 2601
An Optimization Model of Noise and Vibration in Passenger Car Cabin
Numerical and Experimental Investigation of Inward Tube Electromagnetic Forming- Electromagnetic Study
Modal Analysis of the Milling Machine Structure through FEM and Experimental Test
Analysis of Finite Element and Finite Volume and Investigation of Effectual Parameters in Direct Extrusion
Finite-Element Analysis of Heat Generation by Plasma in Welding Temperature Field of Stainless Steel
A CAD/CAPP/CNC Integrated System Based on Lightweight 3D Model
Prelimenary Study on Thermomechanical Modelling of Cutting Process
Adaptive Aluminum Extrusion Die Design Using Case-Based Reasoning and Artificial Neural Networks
Diesel Engine Maintenance System, Using Trend Analysis of Histroical Data (Case Study)
Effective Variation Analysis Model for the Riveting Press Process of a Flush Rivet
Calculation of Grinding Wheel Profile and 3D Simulation for Grinding Screw Rotor Flute
Research on 3D Modelling and Forming Simulation of Metal Wire
Misfits between Manufacturing Resource Planning (MRPII) System and Manufacturing Environment: A Misfit-Inviability Model
Operational Framework for Manufacturing Resource Planning (MRPII) System Case Studies in Malaysian Small and Medium Enterprises a Taxonomy Model for Structural Misfit of MRPII System
Artificial Neural Network Based Process Model for Arsenic Diffusion in Si1-xGex Alloys
Computer Modeling of MWIR Homojunction Photodetector Based on Indium Antimonide
Empirical Process Model for Arsenic Diffusion in Si1-x-yGexCy Alloys
The Drying Process in Spray Drying and Creation Simulation Model
Chapter 27: Semiconductor Materials Manufacturing
Impact of Different Dose and Angle in HALO Structure for 45nm NMOS Device
A Study on Improving in Natural Convection Heat Transfer for Heat Sink of High Power LEDs
Design and Implementation of a Multi-Channel HDLC Protocol Controller Based on FPGA
A Low Native Jitter Voltage Controlled Oscillator on 0.18µm CMOS Process
Generation Shedding and Load Shedding Based on Transient Energy Margin Sensitivity
Research on MEMS Phthalocyanine-Based Gas Sensor
Research on Stator Winding Leakage Reactance Calculation of Double-Winding AC-DC Generator
Design of Pythagorean Hodograph Curve Interpolator Based on NiosII Embedded Processor and FPGA
Research of Waveguide-Stripline-Coaxial Line Direction Coupler
The Design of Single Phase AC Regulated Power Supply with PWM Chopping Control Compensation
H8Control for PMLSM Suspension Platform Based on PDFF
Vacuum Ball-Collector
Effects of Spontaneous and Piezoelectric Polarization on Spontaneous Emission Rate of Blue LEDs on SiC Substrates
High K / Metal Gate of Short-Channel SOI NMOSFET Research
Novel Flowrate Sensor Based on a Couple of Fiber Bragg Gratings
A LCD Touch Screen Controller Based on LPC2138
Research on Novel Structure of Diode Clamed Multilevel StatCom
Multivariable Distrubance Observer Based Analytical Non-Interacting Control of Mineral Grinding Circuits
Synchronization Control of Space Voltage Vector Controlled Multi-PMSM Based on Adjacent Cross-Coupling
Research on Fault Diagnosis Based on AGA and LSSVM
Study on DPC-SVM Rectifier Based on Power Feedforward
PID Controll of Single Neuron for Switched Reluctance Motors Based on RBF Neural Network
Simulation of Ultrashort Pulse Shaping Filter Based on Multilayer Volume Holographic Gratings
Synchronous Controller of LED Video Displays and LED Lighting Compatible
Embedded Data Acquisition System Based on LPC2290 and AD7715
Reliability Test and Evaluation Analysis of Silicon Pressure Sensor under Vibration Stress
The Meso-Piezo-Capacitive Effect
Effect of Nitrogen Doping on the Structure and Optical Properties of N-Type Hydrogenated Amorphous Silicon Thin Films
An Improvement to Single-Phase RCD Based on MSP430
Memristor Oscillators and its FPGA Implementation
The Study of Aeroengine Automatic Starting Logical Module Oriented towards Maintenance Training
Calculation on Thermal Field of a Doubly-Fed Induction Generator with Axial-Radial Ventilation Cooling System
Mechanism and Suspension Control Study for Spherical Reluctance Motor with Magnetic Levitation
Based on CM6900 Resonance IC Controller SRC LED Lamp Driver Circuit
Influence of Body Contact on the ESD Protection Performance in 0.35µm Partially-Depleted SOI Salicided CMOS Technology
Simulation of Silicon Solar Cell Using PC1D
Equivalent Circuit Model of Top-Emitting OLED for the Designing of OLED-on-Silicon Microdisplay
The Industrial Research about China Solar PV Based on the Price of Polysilicon
Correlation Analysis of Polycrystalline Silicon Industry and Photovoltaic Industry in China
Iterative Learning Cross-Coupled Control for XY Table Based on Real-Time Contour Error Estimation
Chapter 28: Precision Molding Processes
Analysis and Experimental Validation of Performance of Z-Source Inverter-Fed Permanent Magnet Brushless DC Motor Drive
Research of Fuzzy Direct Torque Control of Permanent Magnet Synchronous Motor Based on Simulink
Active Disturbance Rejection Control with Self-Optimizing Control of Permanent Magnet Synchronous Motor
Regulator Design of Vector Control System
CMM Inspect Path Planning for Precision Convex Revolved Surfaces
An Axial-Flux Hybrid Excitation Flux-Switching Machine
Improvement of Passive Location Precision Using ‘Beidou’ Navigation System
Variable-Gain Cross Coupling Control for Linear Motor X-Y Table Based on Genetic Algorithm
Optimization of Micro-Milling Process with Genetic Algorithm
Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method
A Study on the Effect of V-Ring Position on the Die Roll Height in Fine Blanking for Special Automobile Seat Recliner Gear
Influence of Ply Angle on Failure Response of Bolted Composite Joint
The Factors Influenced to Surface Finish in Milling for Hardened Medium Carbon Steel: JIS S50C
On the Mechanism of the Effect of the Cryogenic Treatment on High Speed Steels
Research on Inorganic Material Modification of PVC
Design and Development of a Rotary Airlock Valve for Using in Continuous Pyrolysis Process to Improve Performance
Acrylic-Based 1x2 Plastic Optical Fiber Coupler Device Manufacturing Using EGX400 Desktop Engraver System
The Application of Permanent Magnet Electric Machine on Electrical Wheelchair
Chapter 29: Nanofabrication, Nanometrology and Applications
Applications and Prospects of Hollow Micro/Nanospheres in Environmental Protection and New Energy
A Design Methodology for Lithium-Ion Battery Management System and its Application to an Autonomous Underwater Vehicle
Material Level Noise Measuring for Steel Ball Coal Mill Based on Energy Entropy of Wavelet Packet and Least Squares Support Vector
A MEMS-Based Inertial Navigation System for Mobile Miniature Robots
Design of Photon Counter in PCS Nano-Particle Size Analyzer
The Performance Optimization Design of High Frequency and High Voltage Transformer of Electronic Beam Welder
Application of Quantum-Behaved Particle Swarm Optimization in Engineering Constrained Optimization Problems
Nanoimprint Lithography of Multistep Loading
Influence of Surface and Interface Properties on the Electrical Conductivity of Silicon Nanomembranes
Chapter 30: Automation, Mechatronics and Robotics
The Design and Test of HEMP Simulator Based on Coaxial Peaking Technology
Research on Multiple Bi-Directional DC/DC Converter in Wind Power Flow Optimization and Control System
Based on Adams and Matlab Co-Simulation and Experimentation Research for Independent 4WD EV
Research on Co-Evolutionary Genetic Algorithm of Long-Distance Gas Pipelines Optimal Model Economy
Simulation of NN-Based MRAC for PMSM in AC Drive Mining Truck
Based on Linear Quadratic Regulator Optimal Control of Single Inverted Pendulum System Co-Simulation of ADAMS and SIMULINK
Modeling and Simulation Research on the Maintenance System of Armored Equipment
The Simulation of New Arc Welding Power Based on Matlab
Comparison of Photovoltaic Power Generation Interconnection Standards
The Design of CAN Bus Intelligence Node Based on MCF52234
Study on Nonlinear Robust Control for Permanent Magnet Linear Servo System
Speed Sensorless Control System of Mining Locomotive Drive Based on DSP
A Novel Multi-Tooth Fault-Tolerant Flux-Switching Machine
A Novel 12/10 Electrical Excitation Flux-Switching Machine
Research of Engine Piston Pin Fatigue Analysis Based on UG
The Study and Simulation of Pitch Control Servo System in Mega-Watt Class Wind Turbine
Direct Torque Control of Bearingless Induction Motor Using Space Vector Pulse Width Modulation Based on Fuzzy Adaptive Control
The Simulation Study for Auto Electrical Seat Controller Based on Fuzzy Control Technology
Study on Simulation of Path Plan of Parallel Grinding for Wedge Aspheric
Fuzzy Control of Automobile ECBS on Varying Pavement
Fuzzy Controller Design for Multi-Legged Robot
Development of Service Platform for Machine Tool Fixture Design and Manufacture
The Modeling and Simulation of EGCS Based on Matlab/Simulink
Simulation Study of Damage Identification Method Based on Lamb Wave Scattering in Aluminium Plate
Modeling and Dynamic Characteristic of a Pneumatic Solenoid Valve
Reentry Trajectory Optimization of Airbreathing Hypersonic Vehicles Based on Gauss Pseudospectral Method
Analysis of Dual Stator-Winding Induction Generator Based on Ansoft
Molecular Dynamics Simulation of the Rapid Solidification of Liquid Zinc
Modeling and Simulation for Super Capacitor Braking Energy Recovery Process of Micro EV
Application of Complex Method for Optimization of Isolated Heat Pipe Heat Exchange System
Normalized Energy Stability Margin Based Analysis of Omni-Directional Static Walking of a Quadruped Robot on Rough Terrain
Hot-State Numerical Simulation Study on Top-Blown Bath in ISA Furnace
Finite Element Analysis of Fiber-Reinforced Iron-Boron Alloy
Front Car Door Modal Analysis Based on Finite Element Method
Switched Reluctance Motor Drive System Model and Simulation Based on ANSYS and SIMULINK
Electromagnetic Force Modelling for Hybrid Magnetic Bearing
Fuzzy Control and Simulation Studies of Hot Rolling H-Beam’s Water Supply System
Simulation of Permanent Magnet Synchronous Motor for Electric Vehicle Indirect-Torque Control System
Low-Speed Turning Back Simulation and Evaluation of a Car Based on ADAMS
Zero Internal Force Control for a Dual-Arm Space Robot
The Influence on High-Speed Electrical Multiple Unit by Fluctuation of Traction Power System’s Voltage
Steering Wheel Angle Pulse Input Simulation and Evaluation of a Car Based on ADAMS
Design of Photovoltaic Generation Monitoring System Based on WinCC
A New Method of Fault Diagnosis with Soft Set Theory
Design of Random Combination System Based on Five Common Kinds of Mechanical Transmission
Modeling and Analysis of a Turbidostat Model with Monod-Type Kinetics and State Feedback Control
Circuit Model of Laser-Triggered Surface Flashover Switch in Vacuum Condition with Pulsed Voltage
Detection of Electromagnetic Pulse Induced Hazard on Electroexplosive Device Based on Optical-Fiber Fluorescence
Risk Assessment Model of Automobile Defect Based on Weibull
The Fuzzy Immune PID Control Based on the Water Position of the Steam Generator
Electromagnetic Compatibility Analysis of Carbon Fiber Cabin Struck by Lightning in the Aircraft
The Switched Control of Single Phase Active Power Filter
Analysis and Experiment of the Eddy Current Losses for Canned Motor
The Pole Width Modulation Method and Experiment on Reducing the Voltage Harmonic of PM Wind Generator
A Path Planning Approach for Wedge/Aspheric Lens Element Grinding Based on Space Coordinate Transformation
Study on the Safety Design and Test Method of Ultrasonic Cleaning Device for the Motor Winding
Pressure Analysis of Hydraulic Pumping System of Concrete Pump
Attitude Control of Rigid Body Using Sliding Mode Control
Vision-Based Guidance for an Unmanned Aerial Vehicle Following a Moving Target
An Empirical Model for a Variable Speed Refrigeration System
The Variable Speed Direct Drive Permanent Magnet Synchronous Wind Power System Used on Matrix Converter
An Improved Geomagnetic Matching Algorithm Using Rotation Angle Search Technique
A Signal Quality Monitoring Based on Least-Squares for Global Navigation Satellite System
An Improved Adaptive Kernel-Based Object Tracking
Analysis and Discussion of the Influence Factors of the Wind Power
Robust Tracking Control Based QFT and Pade Approximation for Flight Simulator
Counting of Microscopic Cells Based on Grads Hough Transform
Composition Analysis of Ge Graded Si1-xGex Alloy Films by Capacitance-Voltage Method
Composition Analysis of Ge/Si1-xGex: C Buffer on Silicon Measured by Planar Scanning Energy Dispersive Spectroscopy
Research on a Novel Power Inverter Control Strategy Based on Micro-Grid
Research on Tension Control System of Filament Winding Machine
The Dynamic Characteristics of AD590
Study on System Identification Method Based on PID Control Algorithm
Based on the Nc Machining System Error Aspheric Analysis and Research
A Computed Model of the Pendulum Test of the Leg for Quantitative Evaluation of Muscle Spasticity
Application of Fuzzy Assessment Theory in Tower Crane Safety
Expected Model for Time-Energy Trade-Off Problem of Product Disassembly
The Characteristics of Calcium-Based Sorbent Burning Pore Structure and Simulation of Gas-Solid Mass Transfer in Vulcanization
Synthesis and Photovoltaic Properties of Fluorene-Based Copolymers with Thiophene Heterocycle on the Side Chain
Stress Problems at the Steam Drum Fatigue Checking Point of a Supercharged Boiler
Numerical Simulation and Engineering Application of Bolt’s Supporting in Tectonic Stress Field
Research on Numerical Analysis of Landslide Cataclysm Mechanism Coal Mine
Active Disturbance Rejection Decoupling Control for Aero-Engines
Optimization and Application of Composite Index Method for Evaluation of Rock Burst Rating
Filed Test Studies on Internal Force of Pile in Pile-Anchor Supporting System for Deep Foundation Pit
Analysis of Condensing Temperature Set Point of Air-Cooled Refrigeration System with an Electronic Expansion Valve
The Toxic Effects of Algicidal Bacteria L7’s Algicidal Components to Brachydanio rerio
Numerical Simulation of the Spray Characteristics in Small Scale Liquid Rocket Engine Combustion Chamber
Experimental Study of Integrated Vortex Board with Exergy Analyses
Development and Realization of Bag Filter On-Line Monitoring System Based on AC Charge Induction
Application of Artificial Neural Network for Modeling of Mechanical Cooling Tower