Buch, Englisch, 860 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1650 g
ISBN: 978-3-03785-409-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Organization and Committees
Chapter 1: Machinery and Engineering Applications
Mission Reliability Simulation and Verification of Electrification System of Conventional Submarines
Finite Element Analysis for Hydraulic Support
Design of a Shaft Assignment Radial Piston Pump
The Effect of Dynamic Vulcanization on Mechanical, Rheological, Thermal Properties and Morphology of ABS
Analysis on the Relation between the Mechanics and the Aesthetics of Machine Structure
Research on Thermal Characteristic of Spindle System of CNC Machine Tool
Finite Element Analysis and Framework Improvement of the Truck Frame
Design of Hydraulic System of Sway Machine Based on Electro-Hydraulic Proportional Control Technology
Research on Laser Quenching Path of Numerical Control Algorithm
Study on the Computing Method of Cutter Path for Improving the Accuracy of Machine Tools
Research on Physical Simulation of Virtual CNC Turning
Research on the Clearance Seal in Stirling Refrigerator
Discussion on Processing Technology of Small Modulus Involute Spline
Vulnerability Assessment for Fire and Explosion Suppression Measures of Aircraft Fuel System
The Research of FMS Scheduling and Simulation
Heave Compensation System for Base Plate Used in Deep-Water Exploration Ship
Dynamics Simulation Analysis with Crankshaft Filled Rolling Based on ANSYS
Simulation of Deployment Process with Large Deflections for Coiled Flexible Shells Based on Prestress Initialization Method
Reduction of Residual Vibrations in High-Speed Cam Mechanisms Using Non-Uniform Rational B-Splines
Creative Combination Simulation System Design of Mechanical Transmission Based on Image
Braking Performance Analysis for Light Duty Vehicle Matched with Braking Force Regulator
The Modeling and Simulation of DFIM Based on Auto Disturbance Rejection Controller
Fatigue Life of Taper Roller Bearings in Drive Rear Axle Main Gear Reducer
Optimized a Certain Type Wheeled Vehicle Dynamic Capability Based on Chassis Dynamometer
Research and Design of Electric Fuel Pump Testing System
Anti-Air Missile Warhead with Multiple Explosive Forged Projectiles
Parameterized Modeling and Finite Element Analysis of the Support of Precalciner
Conceptual Design of an Automatically Replacing and Charging System for Electric Vehicles
Control of the Flight Vehicle Cable over Wide Spectrum Radiation Effects Simulation Experiment Research
In-Plane Cushioning Optimization of Multilayer Regular Triangular Honeycombs
Modeling of Flow Stress of Spray-Forming FGH95 Superalloy under Hot Compression
The Effect of Lashing Wire Location on Mode Localization of Mistuned Bladed Disks
The Structure Design of the Mechanical Clamping Claw of the Automatic Arranging Drill Pipe System
Research on the Memory Cutting Model of Shearer
Screen-Printing-Based Fabrication of Silver Patterns on Polyimide Substrate
Linear Stability Analysis of Space Compressive Structure of the Inverted-V Combinatorial Jib
Study on the Uncertain Problem for Project-Based Remanufacturing Systems
Die-Face Compensation for Hot Bending of U-Shaped Part Based on RBF Neural Network
Simulation of the 45t Converter Tilting Torque
Heat Conduction Equation Finite Volume Method to Achieve on MATLAB
Driving Dynamic Analysis and Motion Control for Biped-Imitating Walking Mechanism
Design on Cutting Die of Connection Plate
Simulation and Matching for the Powertrain System of Saloons
Application Key Technologies of Ferritic Stainless Steel for Traffic Sign Substrate Plate
Design of a Bidirectional Telescopic In-Pipe Robot
Neural Network Model and Design Patterns on Fuzzy Evaluation System of Special Electromechanical Equipment
Rotor Critical Speed Calculation Based on Finite Element Method of a Mixed Model
Simulation of Bus Ride Comfort under the Excitation of Road Irregularity
Under the Elastic Supporting the Gear Transmission Dynamics Modeling and Simulation Analysis
The Material of the Resonant Vibration Impact Motivates the Influence of and the Simulation Analysis
Usability Evaluation of Welding Clamp Based on Improved Fuzzy Synthetic Evaluation Model
A New Method to Solve No-Probabilistic Finite Element Method
The Optimal Design of Electromagnetic Ball Valve with MATLAB Optimization Toolbox
UG Software CAD/CAM Technology in Shark Model Processing Application
Fatigue Behavior Research of TCS Typical Welded Joints
Study on Wind-Induced Vibration Response of Aerial Working Arm
Based on SolidWorks COSMOS 2.5 Tons, 4 m•s-1 High Speed Elevator Car Frame's Finite Element Analysis
Nonlinear Dynamics Behaviors of Ball Screws with Preload Considered
The Mathematics Model Research and Analysis of Vibrating Fluidized Classification Technology of Kernel and Husk Separation Machine
Fault Diagnosis and Fault Trend Forecasting of Blower Based on Matlab and Wavelet Packet Analysis
Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators
Internal Common-Mode Current Flow Path of Induction Motor
Fixture System Based on Reconfigurable Lever Driven by Pneumatic Muscle
Study on Technics in Laser Accumulation of Change-Diametral Rotary Parts with the Coaxial Inside-Beam Powder Feeding
Modeling and Simulation for Feed Servo System in CNC Machine Tool
Dynamic Characteristics Study on Hydraulic Impact of Cartridge Valve in High Pressure and Large Flow Depressurization Process
A New Method for Analyzing X-Cor Sandwich’s Shear Strength
Research of Limitation and Cooperation Relationships of Pulleys and Bushing Based on Temperature Field
The Control of the Gap between Tool and Support, and the Analysis of its Effect on the Accuracy of CNC Incremental Forming
A Detection System of Tool Condition Based on Image Processing Technology
Concurrent Engineering and its Key Technologies of Product Design
Study on Numerical Control Machining Technology of Full-Surface Part
Failure Analysis of Slurry Pump Impeller in Chehe Dressing Plant
Research on the Grinding Mechanism Based on the Cutting Simulation
Use Spectrum Analysis to Test the Frequency-Domain Characteristics Parameters of ADCs
High-Frequency Inducting Plate Bending Forming with Gravity on Different Thickness Ship Plate
Simulation and Analysis of Angle-Variable Linkage of Multi-Functional Mechanical Based on ADAMS
Research on Optimum Design of Molded Lines of the Bulbous Bow of a Container Vessel
Optimization of Ship Hull Lines of Bulbous Bow by Using CFD Approach
Non-Repair Dynamically Balanced Device of Wheel Set in Vehicles
The Dynamic Simulation of Contact Force between Wheels and Ground Based on ADAMS
Study on Novel Automatic Steel Wire Bundling Machine Hydraulic Control System
The Principle Experiment of AlN Used as a Non-Absorbing Window Material of LDs
The Influence of Cutting Depth on Residual Stresses when Orthogonal Dry Cutting GH4169 with High Speed
The Granular Model in Powder Injection Molding
Modeling and Simulation of a Slider-Crank Mechanism with Clearance and Lubricant Joint
Research of Characteristics of a Remote Control Weapon Station's Muzzle Vibration when Shooting on the Move
A Particle Swarm Optimization Algorithm and its Application in Hydrodynamic Equations
Lab Simulation Study on Anti-Cracking Performance of Asphalt Concrete Overlays for Fatigue
Application of Image Enhancement Technology in Bubble Dimension Measurement of Deinked Pulp Flotation Column
Literature Review on the Development of Computational Software System for Creep Damage Analysis for Weldment
The Review of Computational FE Software for Creep Damage Mechanics
Experimental Study on the Response Characteristics of Oilcans under High-Velocity Fragment Impact
A Photographing and Shooting Device Delivery System
Finite Element Static Analysis of Twin Tripod Sliding Universal Joint Used in Small Rolling Mill
Dynamic Simulation of the Interaction between Motion Components of Twin Tripod Slider Universal Joint Based on ADAMS
Based on ANSYS the Static Strength Analysis of Twin Tripod Sliding Universal Joints
The Application of Siemens S7-200 PLC Based on Waste Automatic Test System
Analysis of Nonlinear Dynamic Accuracy on RV Transmission System
Nonlinear Dynamic Model and Equations of RV Transmission System
Research of Amplification Frame Optimization Based on Optistruct
Numerical Study of NOx Emissions in RQL Gas Turbine Combustor
Development of Coal Reaming Stress Analysis and Cutting Simulation System Based on VB
Chapter 2: Materials Science
Study of Synthesis Process of L-Ascorbic Acid Cellulose Ester
The Change of d-Electron Occupancy of Ni in Ni92Tm8 (Tm=Ta, Nb, Mo, Cr, Mn) Alloys Measured by Electron Energy Loss Spectroscopy
Tribological Behaviors of Polymer Based Composites under Alkaline Conditions
Hydrothermal Preparation and Photocatalytic Activity of Different Morphology Titania
ß-Ni(OH)2 Nanospheres Synthesized via the Easy Hydrothermal Method
Studies on Mechanical Properties and Structure of LLDPE/Nano-Montmorillonite Composites
Microstructure and Mechanical Properties of 6061 Aluminum Alloy by Laser Welding with Filling Wire
The Optical Absorption Properties of WO3 Nanorods Synthesized by the Hydrothermal Conditions
Effect of Particles Concentration on the Properties and Microstructure of Ni/TiO2 Group EMR
Luminescence Properties of Zn2Si1+xO4+2x: Mn2+ in UV and VUV Region
Energy Management Strategy for a Fuel Cell E-REV Based on Minimum Power Loss Algorithm
Influence of Sensitizer Concentration on the Upconversion Luminescence of NaYF4: Yb3+, Er3+ Nanoparticles
Luminescence Properties of Er3+-Doped Ga2O3-GeO2-Bi2O3-R2O (R=Na and K) for 1.53 µm Fiber Amplifier
Fine Cemented Carbide Particles Prepared with Activated Tungsten Oxide
Synthesis and Magnetic Studies of Core-Shell FePt@Fe3O4 Nanowires and Nanoparticles
Evolution of the Plastic Deformation Mechanisms in a Compressed Mg-10Gd-2Y-0.5Zr Alloy
Study of Preparation and Properties of Fire-Retardant Melamine Formaldehyde Resin Foam
Polymer Micro Hot Embossing with Bulk Metallic Glass Mold Insert
Effects of Doping Si on the Preparation of Ternary Titanium Aluminum Carbide Powder by Pressureless Sintering
Microstructural and Mechanical Properties of Autoclaved Saline Soil Brick: Part I: Microstructure Features
Microstructural Features and Mechanical Properties of Autoclaved Saline Soil Brick: Part II: Mechanical Properties
3D Nonlinear Contact FEM Analysis of U-Ring Seal Structure
Finite Element Analysis of Metal Flow of Finishing Groove in Hot Continuous Rolling Bar
Investigation of Sodium Hyaluronate/ Konjac Glucomannan Blend Films
Study on the Microstructure and the Mechanical Properties of Zr R60702
Modified Zeolite and Treatment with Cr3+ in the Wastewater
Development of High Performance Mid-Temperature Burnt Al2O3-ZrO2-C Slide Gates
Computer Design of Low Silicon Sinter Fractal Dimension Based on SEM Images
Research of a Kind of New Intelligent Robot Hand Material
Evaluation of the Uncertainty in Determination of the Alumina Content in Limestone by Chrome Azurol S Photometry
Programme of Using Thorium Resources in China Nuclear Power Development
Experimental Researches on the Preparation of High-Efficient Active Floridin by Mixed Acids
Improvement on the Anti-Cracking Properties of Al2O3-SiC-C Based Castables for Trough
Flow Stress Prediction of High-Nb TiAl Alloys under High Temperature Deformation
Constitutive Modeling of Beta Titanium Alloy Ti-10V-4.5Fe-1.5Al during Hot Deformation Process
Microstructure and Hardness of TiC/Ni-Based Coating by Plasma Cladding
Laser Cladding of Titanium Alloys with Ti+Al+C Powders
Study on Properties of Modified Nano-ZnO/WPU Hybrid Material
First-Principles Study on Al or/and P Doped SiC Nanotubes
Fatigue of Nanotube-Reinforced Carbon Fiber Epoxy Composites
Synthesis and Characterization of Silver-Histidine Complex Doped Montmorillonite Antibacterial Agent
Study on Melt Grafting of MAH onto P(3HB-co-4HB)/PLA Blends
Large Nonlinear Optical Absorption Response in Monolayer Graphene and Graphene Oxide
Research on Key Technology of Normal Grain Growth for Second Phase Particle Materials by Cellular Automata Simulation
Review on the Current State of Developing of Advanced Creep Damage Constitutive Equations for High Chromium Alloy
Recent Progress in Hydrogen Storage Characteristics of Ti-Based Icosahedral Quasicrystal Alloys
Recovering Obliterated Engraved Vehicle Identify Number on Aluminum Engine Surfaces by Alkaline Etching Technique
Numerical Simulation of the Two-Phase Flow in Novel Combined Top and Corner Spray Degassing Tank for Aluminum Melt
Research on Patching Materials for Converter
Cation Exchange Detection in the Process of Ionic Soil Stabilizer Reinforcing Soil by Laser-Induced Breakdown Spectroscopy
Atomic Diffusion of Al and Si in Cu44.25Ag14.75Zr36Ti5 Bulk Metallic Glass
Research and Application of Different Rage Fly Ashes in Recycled Concrete
Current State of Developing Creep Damage Constitutive Equation for 0.5Cr0.5Mo0.25V Ferritic Steel
Application for Fly Ash Concrete in Pavement Engineering
Measurements of Optical Parameters of the Fat Emulsion
An Approach of Tool-Chip Friction Coefficient Estimate for the Simulation of Machining Residual Stress
The Intelligent Vehicle Navigation System Based on Photoelectric Sensor
