Energy Systems, Materials and Designing in Mechanical Engineering

Selected, peer reviewed papers from the International Conference for Young Scientists “ELECTRICAL ENGINEERING. ELECTROTECHNOLOGY. ENERGY”, June 9-12, 2015, Novosibirsk, Russia
Erscheinungsjahr 2015
ISBN: 978-3-03835-548-9
Verlag: Trans Tech Publications

Buch, Englisch, 700 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1250 g

Collection of selected, peer reviewed papers from the International Conference for Young Scientists “ELECTRICAL ENGINEERING. ELECTROTECHNOLOGY. ENERGY”, June 9-12, 2015, Novosibirsk, Russia. The 108 papers are grouped as follows: Chapter 1: Electrical Machines, Electrical Drives and Electromechanical Systems; Chapter 2: Power Electronics; Chapter 3: Engineering of Industrial Electricity Systems; Chapter 4: Thermoenergetics Systems; Chapter 5: Engineering Management in Energy;Chapter 6: Electrotechnologies in Electrometallurgy; Chapter 7: Mechatronics; Chapter 8: Researching and Designing in Mechanical Engineering

Autoren/Hrsg.

Gurova, Elena

Fachgebiete

• Technische Wissenschaften Energietechnik | Elektrotechnik Elektrotechnik
• Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik Leistungselektronik
• Technische Wissenschaften Energietechnik | Elektrotechnik Elektromotoren
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau
• Technische Wissenschaften Energietechnik | Elektrotechnik Thermische Energieerzeugung, Wärmeübertragung

Inhaltsverzeichnis

Preface, Committees and Organizers
Chapter 1: Electrical Machines, Electrical Drives and Electromechanical Systems
Electromagnetic Induced Force Study in the Magnetoelectric Generator Winding
Research of Non-Sinusoidal Voltage in Frequency Converter of Medium Power Operation
Concept of Designing Systems for Monitoring Technical State of Rolling Mill Electric Drives
Induction Traction Motor Mathematical Model to Control Thermal State
Hybrid Synchronous Motor Magnetic Field Analysis
The Comparison of Methods of Testing Enameled Wire to Mechanical Stress
Investigation of Non-Stationary Processes in a Nonlinear Inductor with the Massive Magnetic Core by Structured Modeling Methods
Building the Structure and the Neuroemulator Angular Velocity's Learning Algorithm Selection of the Electric Drive of TVR-IM Type
Turn-to-Turn Short Circuit Diagnostic Improvement Method Based on ANN for Synchronous Generator Excitation Winding
Mathematical Model of Synchronous Generator without Damper Windings which is Equipped with an Automatic Stabiliser
Increase Adjustment Capacity Generators for Power Supply Systems with Distributed Generation
Electromagnetic Motor with an Active Teeth-Slot Zone for Vibration Technologies
Investigation of Synchronization Properties of PM Machines with Fractional Slot Concentrated Windings
Additional Torque in Multipole Permanent Magnet Machines Caused by Eccentricity
A Sensorless Initial Rotor Position Estimation for Permanent Magnet Synchronous Machines
Developing a Highly Reliable Asynchronous Motor Development with an Asymmetric Magnetic Core for Special Operating Conditions
Simulation Modelling of a Pulse Frequency-Phase Discriminator
Induction Motor Traction Drive with Slipping Protection
An Analysis of the Main Factors on the Wear of Brushes for Brush-Type Motors and the Ways of Increasing their Lifetime
Respecting Life Cycle Management of Electrotechnical Equipment Based on Genetic Modeling Methods
Asynchronous Motor Operation Ability Investigation with Numerical Simulation
Improving Energy Efficiency of the Variable Frequency Drive of the Forced-Draught Fan with the Two-Speed Asynchronous Motor
Numerical Modeling of Dynamic Processes of the Reciprocating Reversible Electrical Machine
Research of Highly Effective Magnetoelectric Disc Type Synchronous Motor
Diagnosis of Inverter Drives Faults
Simulation of Voltage on Stator Winding Terminals of Induction Motor with Impaired Short-Circuit Winding of Rotor
Variable Frequency Control of Induction Motors for Emergency Demand Response
The Universal Mathematical Model of Excitation System of Synchronous Machines
Research Characteristics of Aluminum Alloy Obtained by the Method of Rapid Crystallization in Electromagnetic Field
Chapter 2: Power Electronics
Itinerant Phase Converter with Improved Energy Performance
Multilevel NPC Converters in Parallel Connection for Power Conditioning Systems
Stand-Alone Power Systems with IGBT Inverter
Chapter 3: Engineering of Industrial Electricity Systems
Francis Turbine Modeling for Hydrounit on the Bases of the Doubly Fed Induction Machine
Analysis of Power Operational Properties Transformers with a Core of Amorphous Materials
Subsynchronous Resonance in Independent Energo with Distributed Semiconductoring Load
Analysing the Impact of Electrical Displacement and Leakage Currents in Transformer Insulation on Voltage Measurement Accuracy
Population-Based Algorithms for Optimization of the Reactive Power Distribution and Selection of the Cable Cross-Section in the Power-Supply Systems
On Methods of Investigation of Power Generator Differential Protection Behavior in Automatic Mode
Equipment State Assessment System Based on Adaptive Neuro-Fuzzy Inference System (ANFIS)
The Impact of Distributed Generation on Power Quality of the Electric Network
Improving of Energy Measurements Reliability Using Weighted and Normalized Residual Analysis
Problem of Reliability, Verification of Electrical Power Systems Simulation and Ways of Solving it
Fixing Magnetically Operated Sealed Switches of Current Protections in Closed Electrical Pathways of Electrical Installations at 6-20 kV
Development of Calculation Methodology of Thermal Equivalent Circuit’s Parameters for Predicting Temperature of High Voltage Cable Lines 110 - 500 kV
Efficient Ways and Means of Reliability Increase of Distribution Networks
Phasor Measurements Application in Power Systems for Accelerated Power Flow Calculations in Emergency Control
Open Overhead Transmission Lines
Peculiarity of Determination of Economic Current Density Values for 6 – 35 kV Power Lines under Modern Conditions
Investigation of Defect Formation Process in Transmission and Distribution Equipment
Efficiency of Using Artificial Neural Network for Short-Term Load Forecasting
Decision Support System Based on the Concept of Hybrid Simulation for Dispatching Personnel of Electric Power Systems
Technical Diagnostics of Electric Equipment with the Use of Fuzzy Logic Models
Pre-Design Study for Construction of a Wind Power Station with the Capacity of 50 MW
Chapter 4: Thermoenergetics Systems
Investigation of the Coal Char Conversion by Thermogravimetric Analysis
Long-Term Experience of Running Operation Boilers Equipped with Furnace Working upon High-Temperature Circulating Fluidized Bed
Combined Cycle Gas Turbine (CCGT) with Freon Steam Turbine
Method for Selecting Quantity and Power of Diesel Generators
High-Temperature Technologies of Electric Energy Production on Steam-Turbine Power Plants
Results of Mathematical Modeling to Study the Influence of Accounting the Process Moisture on Energy Indicators of Cogeneration Steam Turbines
Optimization of Pump-Throttling Substation of Heating Networks
Grid Wind Power Plant with Compensation of Active and Reactive Power
Power Plants Process Control Improvement in Emergency
The Analysis of an Air Condenser’s Performance in Russia's High Northern Climate
Chapter 5: Engineering Management in Energy
Assessment of the Impact of Sources of Funding on Project Successes Criteria of Energy Saving
Cross-Subsidization in Power Engineering
Mechanisms of Destruction by Alternate Current
Energy Efficiency of Investment Projects Public and Private Partnerships
Energy Service Contracts: Russian Practices
Impact Analysis of Excessive Fuel Consumption on Technical and Economic Performance of Coal-Fired Co-Generation Units
Assessment of Administrative Labor Organization in Electrical Engineering
Optimal Control Mode of the Vakhsh Hydropower Reservoirs to Reduce Electricity Shortages in Tajikistan
Chapter 6: Electrotechnologies in Electrometallurgy
Electrical Parameters of Induction System for Internal Cylindrical Surfaces being Heating
Studies of Electromagnetic Stirrer Modes
Optimization of Induction Heating Regarding Typical Quality Criteria: Problem Solution Based on 2D FEM Analysis
Analytical Analysis of Electromagnetic Processes in System "MHD Stirrer - Bath with Melt"
Permanent Magnet Heater for Special Applications
The Study of the Thermal Processes in an Electrode Influenced by an Electric Arc
Developing and Testing of Improved Control System of Electric Arc Furnace Electrical Regimes
Investigation of Electrical Parameters of Interleaved Conductors' Packages in High Power Electrotechnological Installations
Mathematical Simulation of Acoustic Characteristics of Super-Power Arc Discharges in Electric Steel Furnaces
Design Optimization of Induction Heater in Planetary Reactors for Semiconductor Industry
Calculation of the Melt Surface Shape in Different Induction Crucible Furnaces
Chapter 7: Mechatronics
Eddy Current Impact Estimation in Designing Vibroisolator with 3D Electromagnetic Stiffness Compensator
Characteristics Description of Electromagnetic Stiffness Compensator
Switching Converters Development Systems for Electrostart Diesel Engine Start
Application of Energy Storage Devices at the Road City Transit Rolling Stock
Ways of Decreasing Fuel Consumption in Vehicles
Mechanical Oscillations Simulation of an Adaptive Flexible Mirror
Chapter 8: Researching and Designing in Mechanical Engineering
Improved Cleaning of the Engine Cylinder from the Exhaust Gas Using the Active Ejection in the Exhaust Tract
Energy-Saving Potential from Use of Heat-Reflective Screens with Solar Battery in Windows for Power Supply Systems of Buildings in Different Regions of Russia and France
Experimental Study on Electroplastic Effect in AISI 316L Austenitic Stainless Steel
Enhancing Resistance of Cables to Hydrocarbons
Improvement of Electrical Insulating and Anti-Wear Properties of Composites Used in Telemetry Systems
Iterative Approach in Design and Development of Vertical Axis Wind Turbines
Hardening of Aluminum Alloys with Nano-Dispersed Inclusions during the Implementation of Energy-Saving Process of Self-Propagating High-Temperature Synthesis in Aluminum Melt
Synthesis of MAX-Phase of Titanium Silicon Carbide (Ti3SiC2) as a Promising Electric Contact Material by SHS Pressing Method
Optical Recording of Bubble Dissolution of Diagnostic Gases in Electrical Insulating Liquids
Transport System of Viaduct Type
Probability of the Spectrums Overlap in Case of Carrier Frequency Random Shift in Asynchronous Radio System without Feedback
Improving the Operating Efficiency of Wells with Electrical Submersible Centrifugal Pump in the Fields with Hard to Recover Reserves

In Situ Studies of Molecular Self-Assembling during the Formation of Ion-Conducting Membranes for Fuel Cells
Influence of the Vehicles’ Shape and Length on its Pressure Drag Value Investigation
Determination of Internal Heat Power during the Induction Heating Based on Solution of Linear Inverse Heat Conduction Problem
Thermal Annealing Effect on Active Layer Structure in All-Polymer Organic Solar Cells
Metallurgy and Ancient Coins: A Multidisciplinary Research

Über Autor(innen)

Ed. Elena Gurova