Buch, Englisch, 904 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1590 g
ISBN: 978-3-03835-481-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committee and Sponsors
Chapter I: Advanced Materials Research
A Potential Hybrid TiO2 in Photocatalytic Seawater Desalination
A Review of Advance Nanotechnology against Pavement Deterioration
Characterization and Mechanical Properties of Epoxidized Palm Oil/Epoxy Resin Blend
Comparison of Starch Fiber Filled-Polyvinyl Alcohol and Native Starch Filled-Polyvinyl Alcohol under Tensile Analysis
Curing and Mechanical Properties of Bio-Based Hybrid Thermoset Resins from Unsaturated Polyester and Acrylated Epoxidized Palm Oil
Degree of Hardening of Epoxy-Modified Mortars without Hardener in Tropical Climate Curing Regime
Development of Hydrophobic Microporous Isotactic Polypropylene Membrane for Membrane Contactor Application
Effect of Blend Compositions on Mechanical Properties of Irradiated Titanium Dioxide (TiO2)/Polyvinyl Chloride (PVC)/Epoxidized Natural Rubber (ENR) Nanocomposites
Fabrication of Organic and Inorganic-Based Nanowires: An Overview
Investigation of Heat Treated Electrodeposited CoNiFe on Microstructure and Hardness
Effect of Ceramic Powder on Mortar Concrete
Kevlar Reinforcement in Treated Kenaf Composites: Tensile and Impact Properties
Low Velocity Impact of Aluminium Foam - Glass Fibre Reinforced Plastic Sandwich Panels
Mechanical Properties of Non-Cement Polymer Grout
Physical Properties of Porous Concrete Paving Blocks with Different Sizes of Coarse Aggregate
Polymer-Starch Blend Biodegradable Plastics: An Overview
Preliminary Study of HDPE/Kenaf/MMT Nano-Hybrid Biocomposite: Performance of HDPE/Kenaf Biocomposite
Processing of Injection Moulded of Synthesized HAp by Single Step Wick-Debinding and Sintering
Processing of Porous Copper by Powder Metallurgy Route with Different Types of Space Holder Materials (SHMs)
Properties of Ni-Rich NiTi Alloys Produced by Powder Metallurgy Route
Tensile Properties and Degradability of Polyvinyl Alcohol and Starch Succinate Blend
The Effect of Natural Rubber and Plasticizer Addition on the Mechanical Properties of Taccaleontopetaloides Starch Based Polymer
Utilization of Nano Silica as Cement Paste in Mortar and Porous Concrete Pavement
Mesoporous SnO2 by Nanocasting Route Using Various Silica Templates for Gas Sensing Application
Nanoemulsion: Formation, Characterization, Properties and Applications - A Review
Cementitious Materials Usage in Self-Compacting Concrete: A Review
The Effects of Particle Size and Viscosity on Settling Behaviour and Rheological Performance of Isopropyl Laurate Drilling Fluid
Stabilised Ceramic Dust as Potential Sustainable Construction Components
Chapter II: Bio and Chemical Engineering Materials, Technologies and Applications
Aspergillus
niger ATCC 16404 Producing Pectinase Couple to Polysulfone/Pluronic Membrane Ultrafiltration for Momordica Charantia Juice Clarification
Epipremnum pi
nnatum Activity on Chick Pancreatic Lipase
A Conceptual Reactor Design Based on Combination of Pressure Leaching - Electrochemical Deposition Techniques for Study of Gold Recovery from e-Waste
A Review: Pharmacological Properties of Aquilaria spp.
A Study on Absorption Coefficient of Sustainable Acoustic Panels from Rice Husks and Sugarcane Baggase
Rubber Tree Clone Breed Identification Based on Latex Spectrum Properties
An Overview on Degree of Dispersion: Conformational Molecular Structure-Interaction Force Relationship of Adsorbed Additive
Analysis of Antioxidant Activity and Total Phenolic Content in Garcinia mangostana Using Response Surface Methodology
Biosorption of Nickel by Elaeis guineensis Fruit Fiber
Characterization and Identification of Isolated Microorganism from Agricultural Soil for Degradation of Cellulose Based Waste
Characterization of Automotive Paint Sludge (APS) for Chemical/Energy Recovery via Microwave Assisted Pyrolysis
Chemical Activation of Durian Shell Activated Carbon: Effects of Activation Agents
Comparative Study on Adsorption of Pb(II) Ions by Alginate Beads and Mangrove-Alginate Composite Beads
Comparison on Oil Yield of Phoenix dactylifera Seed Oil Extraction by Supercritical Carbon Dioxide and Solvent Extraction Method at 50°C
Determination of Chemical Species in MDEA – Carbon Dioxide – Water System by Raman Spectroscopy
Determination of Compounds inside Inoculated Aquilaria malaccensis Leaves by Soxhlet Extraction
Effect of Carbon and Nitrogen Ratio, Mineral Solution & Inoculum Size in the Production of Xylanase Using Oil Palm Leaf
Effect of Drying Temperature and Time on Antioxidant and Total Phenolic Content in Garcinia mangostana Pericarp
Effect of Fluid Invasion to Formation Resistivity
Effect of Maltodextrin in Production of Spray Dried Kaffir Lime
Effect of Voltage towards Bubble Formation on Stainless Steel in Aqueous Suspension during Electrophoretic Deposition
Enzymatic Hydrolysis of Lignocellulosic Oil Palm Empty Fruit Bunch (EFB)
Evaluation of CO2 Sequestration by Microalgae Culture in Palm Oil Mill Effluent (POME) Medium
A Review: Extraction of Platinum Spent Catalyst Using Palm Oil Leaf as Reducing Agent
Fatty Acid Methyl Ester (FAME) Production from Waste Cooking Oil
Fruit-Milk Powder: A Review of Spray Drying Technology
Isobutanol Production and Alcohol Tolerance by Yeast Wild Strain
Kinetic Parameters of Biomass Pyrolysis – Comparison between Thermally Thick and Fine Particles of Biomass
Microencapsulation of Essential Oils Application in Textile: A Review
Microwave Drying Characteristics and Antidiabetic Properties of Aquilaria subintegra and Aquilaria malaccensis Leaves
Monitoring of Chemical Speciation of DEA – CO2 – Water System by Raman Spectroscopy
Nutrient Removal of POME Using POME Isolated Microalgae Strain, Characium sp.
Optimization of DMC Transesterification Based Biodiesel Production
Palladium Extraction Using Emulsion Liquid Membrane Process – Stability Study
Potential Antipyretic Agents from Plants: An Overview
Predicting Blast Overpressure Caused by Vapour Cloud Explosion at External Vicinity of Chemical Processing Plant
Rapid Expansion of Supercritical Fluids for Particle Formation from Pharmaceutical Compounds: A Review
Recovery of Residual Crude Palm Oil (RCPO) from Oil Palm Decanter Cake (OPDC) Using D-Limonene
Flow Injection Analysis Nitrite Sensor Based on Reduced Graphene Oxide Modified Electrode
Screening of Carbamazepine-Ibuprofen Co-Crystal Formation Using Non-Stoichiometric and Stoichiometric Methods
Sea Mango Activated Carbon Preparation and Characterization for Dye Removal
Solid Oil Particles Formation of Ginger Rhizome Using Rapid Expansion Supercritical Carbon Dioxide Solution (RESS) as an Environmentally Friendly Method
Solubility of Carbamazepine-Succinic Co-Crystal in Ethanolic Solvent System
Study of CO2 Solubility in Brine under Different Temperatures and Pressures
Synthesis and Characterization of Cassava Starch Nanocrystals by Hydrolysis Method
Synthesis of Cocoa Butter Equivalent from Formulated Hard Palm Oil Mid-Fraction and Canola Oil Blends
Tar Elimination from Producer Gas by Using In Situ Catalytic Reforming of Tar
The Effects of Soaking on Rice Granules for Bedak sejuk Production
Total Phenolic Content and Antioxidant Activity of Local Fruit Wastes in Malaysia
Ultrasound-Assisted Extraction of Natural Dye from Exocarp and Mesocarp of Cocosnucifera
Removal of Carbon Dioxide by Emulsion Liquid Membrane Containing Blended Amine
Reusability of Fenton Sludge to Reduce COD and Color on Palm Oil Mill Secondary Effluent (POMSE)
Flooding with Biopolymer from Microbes Derived from Mushroom and Cabbage to Enhance Sweep Efficiency in Enhanced Oil Recovery
Morphology of L-Alanine Crystal, Associated with its Interaction with Glycine Additive: A Molecular Modelling and Experimental Study
Racemic Ibuprofen Morphology: Molecular Modelling and Experimental
Influence of Gigantochloa ligulata Nutrient on Lactobacillus delbrueckii for Textile Wastewater Decolorization
Production of Biodiesel from Cooking Oil Using CaO Catalyst
Chemical Compound Evaluation of Polylactic Acid from L(+)-Lactic Acid Monomer Obtained through Cassava Fermentation by Rhizopus oryzae
Degradation of Phenol from Glove Factory’s Effluent by Zn/TiO2 Photocatalyst
Effect of Calcinations Temperature on Physical Properties of Zeolite ZSM-5 Produced from Natural Granite
Effect of Plasticizers on Tapioca Starch-Based Biofilms via Blown Film Extrusion Process
Electrical Properties and Morphology of Electrodeposited Cobalt-Nickel-Iron on Flexible Printed Circuits
Electrochemical Properties of Electrodeposited MnO2 Nanoparticles
Electrodeposition as an Alternative Route to Prepare Nanostructured Lead-Free Solder Alloy: A Short Review
Green Synthesis of Silver Nanoparticles Using Elaeis Guineensis from Palm Leaves: Influence of pH in Reaction Kinetic
Role of Temperature and pH on the Dye Degradation Using Magnetic Nanoparticles Augmented Polymeric Microcapsule
Morphological Analysis of Photodegradable Polyethylene Films for Agricultural Use
Properties of Mortar Containing High Volume Palm Oil Biomass Waste
Self-Assembly of Peptide Amphiphiles: Molecularly Engineered Bionanomaterials
Study on Best Parameters and pH Solution on Water Absorbency of Rice Husk Superabsorbent Polymer Composite
Synthesis of Hydroxyapatite via Sol-Gel Dip-Coating Method on Ceramic Support
Synthesis of Silver-Copper Nanoparticles via Polyol Method: Effect of Reaction Time and Temperature
Thermal Property of Eutectic Molten Salts by Using Thermogravimetric Analyzer (TGA)
Chapter III: Oil and Gas Research
Drilling Fluid Design for Shale Gas Drilling
Effect of Preheating the Gasifying Inlet Air on the Hydrogen Output in Oil Palm Fronds Gasification
Hydrogen Storage in Modified Kenaf
Interfacial Tension Dependence on Nanoparticle Surface Modification for Stabilization of CO2 Foam in EOR: An Overview
Wettability Modifier for Enhanced Oil Recovery in Carbonate Reservoir: An Overview
The Characteristic Study of Oil Palm Kernel Expeller as Lost Circulation Material in Water Based Drilling Mud (WBM)
Simulation of Oxygen-Steam Gasification for Hydrogen Production from Date Pits
Effect of Solvent Evaporation Time on CO2/CH4 Gas Performance for Poly(Lactic) Acid Membranes
Energy Efficient Distillation Columns Design for Retrofit NGLs Fractionation Process
Engine Performance Investigations of Palm Oil, Jatropha Oil and Waste Cooking Oil as Alternative Fuel
Microencapsulation Methods of Volatile Essential Oils - A Review
Online Gas Chromatography of Hydrogen and Methane Production from Palm Oil Mill Effleunt (POME) Using High Frequency Ultrasonic Atomization: A Preliminary Study
Polymer Gelled Technology to Improve Sweep Efficiency in Enhanced Oil Recovery: A Literature Review
Chapter IV: Modelling, Simulation and Control
A Review on Empirical Modelling of CO2 Solubility in Absorption Process
Application of Taguchi Optimization Method in Improving the Selectivity of Dihydroxystearic Acid
Aspen Plus Simulation of Ultrasound Assisted Distillation for Separating Azeotropic Mixture
Enhanced Fuzzy Logic Controller for Simulated HE Temperature Control System
Graphical Technique for Root-Cause Analysis in Inherent Safety Assessment
Neural Wiener Based Model Predictive Control (NWMPC) for MTBE Catalytic Distillation Using Reduced Sequential Quadratic Programming (RSQP)
Simulation Work for the Control of Blood Glucose Level in Type 1 Diabetes Using Hovorka Equations
Application of Response Surface Methodology for Optimization of Methylene Blue Removal by Casuarinaequitifolia Leaves Powder
A Review on the Advancement of Online Monitoring System for Cellulosic Ethanol Production
Chapter V: Environmental and Green Technologies
Analysis of Heavy Metal Compositions in Shah Alam Multi Storey House
Behaviour of Waterworks Alum Sludge for Phosphate Removal
Combustion Behaviour of the Mixture of Coal and Bio-Oil
Effect of Feed Temperature on the DCMD Performances in Treating Synthetic Textile Wastewater
Experimental Field Study of Green Tower Setup
Passive Power Generation and Heat Recovery from Waste Heat
Sequestering Carbon through Utilisation of Waste Oil Palm Trees in Malaysia
Thermal Heat Storage Gain of Salinity Gradient Solar Pond Using Evacuated Tube Solar Collectors
Experimental Comparison between Moving Bed Biofilm Reactor (MBBR) and Conventional Activated Sludge (CAS) for River Purification Treatment Plant
Optimal Low Carbon Cement Plant via Co-Processing Measure
Review on Potential Technologies for Decolourisation of Batik Wastewater
Studies on Power Generation and Wastewater Treatment Using Modified Single Chamber Microbial Fuel Cell
Issues and Challenges on Sustainable Construction in Malaysia: Current Development of Refurbishment Activities
Innovation on Environmental Management Systems towards Firms’ Eco-Efficiency for Malaysia Polypropylene Industries
Scheduled Waste Management in Malaysia: An Overview
