Sonstiges, Englisch, Band Volume 1113, 904 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1113, 904 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-262-4
Verlag: Trans Tech Publications
The 138 papers are grouped as follows:
Chapter I: Advanced Materials Research;
Chapter II: Bio and Chemical Engineering Materials, Technologies and Applications;
Chapter III: Oil and Gas Research;
Chapter IV: Modelling, Simulation and Control;
Chapter V: Environmental and Green Technologies
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
A Potential Hybrid TiO2 in Photocatalytic Seawater DesalinationA Review of Advance Nanotechnology against Pavement DeteriorationCharacterization and Mechanical Properties of Epoxidized Palm Oil/Epoxy Resin BlendComparison of Starch Fiber Filled-Polyvinyl Alcohol and Native Starch Filled-Polyvinyl Alcohol under Tensile AnalysisCuring and Mechanical Properties of Bio-Based Hybrid Thermoset Resins from Unsaturated Polyester and Acrylated Epoxidized Palm OilDegree of Hardening of Epoxy-Modified Mortars without Hardener in Tropical Climate Curing RegimeDevelopment of Hydrophobic Microporous Isotactic Polypropylene Membrane for Membrane Contactor ApplicationEffect of Blend Compositions on Mechanical Properties of Irradiated Titanium Dioxide (TiO2)/Polyvinyl Chloride (PVC)/Epoxidized Natural Rubber (ENR) NanocompositesFabrication of Organic and Inorganic-Based Nanowires: An OverviewInvestigation of Heat Treated Electrodeposited CoNiFe on Microstructure and HardnessEffect of Ceramic Powder on Mortar ConcreteKevlar Reinforcement in Treated Kenaf Composites: Tensile and Impact PropertiesLow Velocity Impact of Aluminium Foam - Glass Fibre Reinforced Plastic Sandwich PanelsMechanical Properties of Non-Cement Polymer GroutPhysical Properties of Porous Concrete Paving Blocks with Different Sizes of Coarse AggregatePolymer-Starch Blend Biodegradable Plastics: An OverviewPreliminary Study of HDPE/Kenaf/MMT Nano-Hybrid Biocomposite: Performance of HDPE/Kenaf BiocompositeProcessing of Injection Moulded of Synthesized HAp by Single Step Wick-Debinding and SinteringProcessing of Porous Copper by Powder Metallurgy Route with Different Types of Space Holder Materials (SHMs)Properties of Ni-Rich NiTi Alloys Produced by Powder Metallurgy RouteTensile Properties and Degradability of Polyvinyl Alcohol and Starch Succinate BlendThe Effect of Natural Rubber and Plasticizer Addition on the Mechanical Properties of Taccaleontopetaloides Starch Based PolymerUtilization of Nano Silica as Cement Paste in Mortar and Porous Concrete PavementMesoporous SnO2 by Nanocasting Route Using Various Silica Templates for Gas Sensing ApplicationNanoemulsion: Formation, Characterization, Properties and Applications - A ReviewCementitious Materials Usage in Self-Compacting Concrete: A ReviewThe Effects of Particle Size and Viscosity on Settling Behaviour and Rheological Performance of Isopropyl Laurate Drilling FluidStabilised Ceramic Dust as Potential Sustainable Construction Components
Aspergillus
niger ATCC 16404 Producing Pectinase Couple to Polysulfone/Pluronic Membrane Ultrafiltration for Momordica Charantia Juice Clarification
Epipremnum pi
nnatum Activity on Chick Pancreatic LipaseA Conceptual Reactor Design Based on Combination of Pressure Leaching - Electrochemical Deposition Techniques for Study of Gold Recovery from e-WasteA Review: Pharmacological Properties of Aquilaria spp.A Study on Absorption Coefficient of Sustainable Acoustic Panels from Rice Husks and Sugarcane BaggaseRubber Tree Clone Breed Identification Based on Latex Spectrum PropertiesAn Overview on Degree of Dispersion: Conformational Molecular Structure-Interaction Force Relationship of Adsorbed AdditiveAnalysis of Antioxidant Activity and Total Phenolic Content in Garcinia mangostana Using Response Surface MethodologyBiosorption of Nickel by Elaeis guineensis Fruit FiberCharacterization and Identification of Isolated Microorganism from Agricultural Soil for Degradation of Cellulose Based WasteCharacterization of Automotive Paint Sludge (APS) for Chemical/Energy Recovery via Microwave Assisted PyrolysisChemical Activation of Durian Shell Activated Carbon: Effects of Activation AgentsComparative Study on Adsorption of Pb(II) Ions by Alginate Beads and Mangrove-Alginate Composite BeadsComparison on Oil Yield of Phoenix dactylifera Seed Oil Extraction by Supercritical Carbon Dioxide and Solvent Extraction Method at 50?CDetermination of Chemical Species in MDEA ? Carbon Dioxide ? Water System by Raman SpectroscopyDetermination of Compounds inside Inoculated Aquilaria malaccensis Leaves by Soxhlet ExtractionEffect of Carbon and Nitrogen Ratio, Mineral Solution & Inoculum Size in the Production of Xylanase Using Oil Palm LeafEffect of Drying Temperature and Time on Antioxidant and Total Phenolic Content in Garcinia mangostana PericarpEffect of Fluid Invasion to Formation ResistivityEffect of Maltodextrin in Production of Spray Dried Kaffir LimeEffect of Voltage towards Bubble Formation on Stainless Steel in Aqueous Suspension during Electrophoretic DepositionEnzymatic Hydrolysis of Lignocellulosic Oil Palm Empty Fruit Bunch (EFB)Evaluation of CO2 Sequestration by Microalgae Culture in Palm Oil Mill Effluent (POME) MediumA Review: Extraction of Platinum Spent Catalyst Using Palm Oil Leaf as Reducing AgentFatty Acid Methyl Ester (FAME) Production from Waste Cooking OilFruit-Milk Powder: A Review of Spray Drying TechnologyIsobutanol Production and Alcohol Tolerance by Yeast Wild StrainKinetic Parameters of Biomass Pyrolysis ? Comparison between Thermally Thick and Fine Particles of BiomassMicroencapsulation of Essential Oils Application in Textile: A ReviewMicrowave Drying Characteristics and Antidiabetic Properties of Aquilaria subintegra and Aquilaria malaccensis LeavesMonitoring of Chemical Speciation of DEA ? CO2 ? Water System by Raman SpectroscopyNutrient Removal of POME Using POME Isolated Microalgae Strain, Characium sp.Optimization of DMC Transesterification Based Biodiesel ProductionPalladium Extraction Using Emulsion Liquid Membrane Process ? Stability StudyPotential Antipyretic Agents from Plants: An OverviewPredicting Blast Overpressure Caused by Vapour Cloud Explosion at External Vicinity of Chemical Processing PlantRapid Expansion of Supercritical Fluids for Particle Formation from Pharmaceutical Compounds: A ReviewRecovery of Residual Crude Palm Oil (RCPO) from Oil Palm Decanter Cake (OPDC) Using D-LimoneneFlow Injection Analysis Nitrite Sensor Based on Reduced Graphene Oxide Modified ElectrodeScreening of Carbamazepine-Ibuprofen Co-Crystal Formation Using Non-Stoichiometric and Stoichiometric MethodsSea Mango Activated Carbon Preparation and Characterization for Dye RemovalSolid Oil Particles Formation of Ginger Rhizome Using Rapid Expansion Supercritical Carbon Dioxide Solution (RESS) as an Environmentally Friendly MethodSolubility of Carbamazepine-Succinic Co-Crystal in Ethanolic Solvent SystemStudy of CO2 Solubility in Brine under Different Temperatures and PressuresSynthesis and Characterization of Cassava Starch Nanocrystals by Hydrolysis MethodSynthesis of Cocoa Butter Equivalent from Formulated Hard Palm Oil Mid-Fraction and Canola Oil BlendsTar Elimination from Producer Gas by Using In Situ Catalytic Reforming of TarThe Effects of Soaking on Rice Granules for Bedak sejuk ProductionTotal Phenolic Content and Antioxidant Activity of Local Fruit Wastes in MalaysiaUltrasound-Assisted Extraction of Natural Dye from Exocarp and Mesocarp of CocosnuciferaRemoval of Carbon Dioxide by Emulsion Liquid Membrane Containing Blended AmineReusability of Fenton Sludge to Reduce COD and Color on Palm Oil Mill Secondary Effluent (POMSE)Flooding with Biopolymer from Microbes Derived from Mushroom and Cabbage to Enhance Sweep Efficiency in Enhanced Oil RecoveryMorphology of L-Alanine Crystal, Associated with its Interaction with Glycine Additive: A Molecular Modelling and Experimental StudyRacemic Ibuprofen Morphology: Molecular Modelling and ExperimentalInfluence of Gigantochloa ligulata Nutrient on Lactobacillus delbrueckii for Textile Wastewater DecolorizationProduction of Biodiesel from Cooking Oil Using CaO CatalystChemical Compound Evaluation of Polylactic Acid from L(+)-Lactic Acid Monomer Obtained through Cassava Fermentation by Rhizopus oryzaeDegradation of Phenol from Glove Factory?s Effluent by Zn/TiO2 PhotocatalystEffect of Calcinations Temperature on Physical Properties of Zeolite ZSM-5 Produced from Natural GraniteEffect of Plasticizers on Tapioca Starch-Based Biofilms via Blown Film Extrusion ProcessElectrical Properties and Morphology of Electrodeposited Cobalt-Nickel-Iron on Flexible Printed CircuitsElectrochemical Properties of Electrodeposited MnO2 NanoparticlesElectrodeposition as an Alternative Route to Prepare Nanostructured Lead-Free Solder Alloy: A Short ReviewGreen Synthesis of Silver Nanoparticles Using Elaeis Guineensis from Palm Leaves: Influence of pH in Reaction KineticRole of Temperature and pH on the Dye Degradation Using Magnetic Nanoparticles Augmented Polymeric MicrocapsuleMorphological Analysis of Photodegradable Polyethylene Films for Agricultural UseProperties of Mortar Containing High Volume Palm Oil Biomass WasteSelf-Assembly of Peptide Amphiphiles: Molecularly Engineered BionanomaterialsStudy on Best Parameters and pH Solution on Water Absorbency of Rice Husk Superabsorbent Polymer CompositeSynthesis of Hydroxyapatite via Sol-Gel Dip-Coating Method on Ceramic SupportSynthesis of Silver-Copper Nanoparticles via Polyol Method: Effect of Reaction Time and TemperatureThermal Property of Eutectic Molten Salts by Using Thermogravimetric Analyzer (TGA)Drilling Fluid Design for Shale Gas DrillingEffect of Preheating the Gasifying Inlet Air on the Hydrogen Output in Oil Palm Fronds GasificationHydrogen Storage in Modified KenafInterfacial Tension Dependence on Nanoparticle Surface Modification for Stabilization of CO2 Foam in EOR: An OverviewWettability Modifier for Enhanced Oil Recovery in Carbonate Reservoir: An OverviewThe Characteristic Study of Oil Palm Kernel Expeller as Lost Circulation Material in Water Based Drilling Mud (WBM)Simulation of Oxygen-Steam Gasification for Hydrogen Production from Date PitsEffect of Solvent Evaporation Time on CO2/CH4 Gas Performance for Poly(Lactic) Acid MembranesEnergy Efficient Distillation Columns Design for Retrofit NGLs Fractionation ProcessEngine Performance Investigations of Palm Oil, Jatropha Oil and Waste Cooking Oil as Alternative FuelMicroencapsulation Methods of Volatile Essential Oils - A ReviewOnline Gas Chromatography of Hydrogen and Methane Production from Palm Oil Mill Effleunt (POME) Using High Frequency Ultrasonic Atomization: A Preliminary StudyPolymer Gelled Technology to Improve Sweep Efficiency in Enhanced Oil Recovery: A Literature ReviewA Review on Empirical Modelling of CO2 Solubility in Absorption ProcessApplication of Taguchi Optimization Method in Improving the Selectivity of Dihydroxystearic AcidAspen Plus Simulation of Ultrasound Assisted Distillation for Separating Azeotropic MixtureEnhanced Fuzzy Logic Controller for Simulated HE Temperature Control SystemGraphical Technique for Root-Cause Analysis in Inherent Safety AssessmentNeural Wiener Based Model Predictive Control (NWMPC) for MTBE Catalytic Distillation Using Reduced Sequential Quadratic Programming (RSQP)Simulation Work for the Control of Blood Glucose Level in Type 1 Diabetes Using Hovorka EquationsApplication of Response Surface Methodology for Optimization of Methylene Blue Removal by Casuarinaequitifolia Leaves PowderA Review on the Advancement of Online Monitoring System for Cellulosic Ethanol ProductionAnalysis of Heavy Metal Compositions in Shah Alam Multi Storey HouseBehaviour of Waterworks Alum Sludge for Phosphate RemovalCombustion Behaviour of the Mixture of Coal and Bio-OilEffect of Feed Temperature on the DCMD Performances in Treating Synthetic Textile WastewaterExperimental Field Study of Green Tower SetupPassive Power Generation and Heat Recovery from Waste HeatSequestering Carbon through Utilisation of Waste Oil Palm Trees in MalaysiaThermal Heat Storage Gain of Salinity Gradient Solar Pond Using Evacuated Tube Solar CollectorsExperimental Comparison between Moving Bed Biofilm Reactor (MBBR) and Conventional Activated Sludge (CAS) for River Purification Treatment PlantOptimal Low Carbon Cement Plant via Co-Processing MeasureReview on Potential Technologies for Decolourisation of Batik WastewaterStudies on Power Generation and Wastewater Treatment Using Modified Single Chamber Microbial Fuel CellIssues and Challenges on Sustainable Construction in Malaysia: Current Development of Refurbishment ActivitiesInnovation on Environmental Management Systems towards Firms? Eco-Efficiency for Malaysia Polypropylene IndustriesScheduled Waste Management in Malaysia: An Overview
