Buch, Englisch, 780 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1450 g
ISBN: 978-3-03835-394-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Symposium E: Materials in Microelectronic and Optoelectronic Industry
Process Control of Buried Layer Epitaxy by Barrel Type Furnace
Ru Thin Film Formation Using Oxygen Plasma Enhanced ALD and Rapid Thermal Processing
Research on Surface Roughness of Acid Etched Silicon Wafers
Investigation of Chemical Vapor Deposited Graphene Film on Oxide Substrate
Ultrahigh Purity Copper Alloy Target Used Innanoscale ULSI Interconnects
Property of an AlGaN/GaN MIS Diode with Si3N4/Al2O3 Bilayer Gate Dielectric Films
A New Type of Self-Aligned Technology for RF and Microwave Graphene Field-Effect Transistors
Electron Beam Annealing for Component Optimization in Si-Sb-Te Material
Structures and Electronic Properties of a Si55 Cluster on DFTB Calculations
Surface Plasmon Enhanced Photoluminescence of the Rubrene Film by Silver Nanoparticles
Development of Precious Metal and its Alloy Sputtering Targets with High Performance
Rheological and Thermomechanical Properties of Meso and Non-Porous Silica Filled Epoxy Composites
Study of Black Center in Silicon Wafer for Solar Cell
Impurity Detection Method for High-Purity BCl3
First-Principles Study on Electronic and Optical Properties of Kesterite and Stannite Cu2ZnSnS4 Photovoltaic Absorbers
Effect of Acetic Acid/Water Ratio on the Microstructure and Properties of LaNiO3 Thin Films by Metal Organic Solution Deposition
Symposium F: Electronic Materials
Effects of Cobalt Nanoparticles Addition on Shear Strength, Wettability and Interfacial Intermetallic Growth of Sn-3.0Ag-0.5Cu Solder during Thermal Cycling
Nickel Nanoparticles Mediated Growth of the Intermetallic Compound between Sn-1.0Ag-Xni Solders Alloy and Cu Substrate
Effect of Bi Addition on Microstructures, Properties and Interfacial Intermetallic Compound Growth of Low-Ag Sn-Cu Lead-Free Solder
Influence of Dislocation Density on Micromechanical Characteristics of Cu6Sn5 and Cu3Sn
Microstructure and Dielectric Properties of (Ba, Ta) Co-Doped Sr2Nb2O7 Ceramics
Effect of Ag Addition on Growth of the Interfacial Intermetallic Compounds between Sn-0.7Cu Solder and Cu Substrate
Ferroelectric and Photovoltaic Properties of Mn-Doped Bismuth Ferrite Thin Films
Magnetic Properties and Unusual Morphologies of Barium Ferrites Prepared by Electrospinning and Sol-Gel Auto-Combustion Method
Symposium G: Multiferroic Materials
Effects of Sm and Mn Co-Doping on Structural and Optical Properties of BiFeO3 Thin Films Prepared by Sol-Gel Technique
Effects of Ba and Ti Codoping on Stoichiometric and Nonstoichiometric BiFeO3 Multiferroic Ceramics
A Review on the Characteristics of the New Multiferroic Three-Ply Structure Ferroelectric-Ferromagnetic Nanocomposite
Preparation of LSMO/PLZT Composite Film by Sol-Gel Technique and its Ferroelectric and Ferromagnetic Properties
Microstructure and Properties of A-Site Doping Bi4-xYxTi3O12 Ferrroelectric Thin Films
Enhancement of Oxygen Vacancies Induced Photovoltaic Effects in Bi0.9La0.1FeO3 Thin Films
Investigation of the Electronic Structure of BiFeO3 Epitaxial Films by Polarized X-Ray Absorption Spectroscopy
Effect of Mn Substitution on Microstructures, Dielectric and Magnetic Properties of BiFeO3 Ceramics
Influence of Permeability and D33 on Fega/PZT/Fega Magnetoelectric Effect
Synchronous Characterization of Self-Bias Magnetoelectric Composite Materials
Symposium H: Smart Materials
Disperse SiO2 Nanoparticles in Nonaqueous Solvents by Shear Emulsification and Surface Functionalization
Fabrication and Property of W/Tininb Shape Memory Alloy Laminated Composite
Preparation and Properties of Nano-Crystalline Cellulose Electro-Rheological Fluid
Microstructure, Phase Transformation and Mechanical Property of Ni-Co-Mn-In Alloy Prepared by Spark Plasma Sintering
Effect of Thickness on Mechanically Tunable Magnetic Anisotropy of FeGa Thin Films Deposited on Flexible Substrates
Advances on FeCuNbSiB Nanocrystalline Soft Magnetic Powder Cores
Symposium I: Vanadium-Titanium and Rare Earth Functional Materials
Preparation and Characterization of Mesoporous Sulfated TiO2-Graphene Oxide Composites
Features of Different Types of V-Ti Iron Concentrate Powder and their Influences on the Properties of Cold-Bonded Iron Ore Pellets
Study on Direct Reduction of Vanadium Slag
Characterization of Hot Deformation Behavior of TC18 Titanium Alloy
Effects of Electroless Nickel on Hydrogen Absorption Properties of Zr-V-Fe Powders
Preparation and Magnetic Properties of Nanocrystal Bulk SmCo7 Magnets
Study on the Magnetic Properties and Microstructure of Single-Stage Hot-Deformed Nd-Fe-B Magnets
Preparation of the Nanoceria Powder from Bastnasite
Effect of V(C,N) Master Alloy on the Grain Size of Low Carbon High Strength Bainite Steel
Effect of Sintering Temperature on Microstructure and Mechanical Properties of Ti Mo Alloys
Synthesis and Photoluminescence Property of Ca3Y2-xSmxWO9 Phosphors
Luminescence Properties of Phosphor (Sr1-xBax) 1.95 SiO4: 0.05Eu2+
Synthesis and Luminescent Properties of Ca2Li2BiV3O12:Eu3+ Phosphor
Effect of Surfactants on Morphology and Luminescent Properties of YAG:Ce Phosphors
Symposium J: Biomedical Materials
Titanium Foams Prepared by Using Carbamide as Spacer for Cortical Bone Implant
Preparation and Mechanical and Optical Properties of SF/Pyrrolidone Blend Film
In Vitro Controlled Release of Topically Applied Capsaicin from Silk Hydrogel: A Study Contributed to the Pain Relief System
Dental Resin Composites with Enhanced Properties Bycommercial Silica Particles as Fillers
Novel Enhanced Acrylic Denture Base Powder by Incorporating with PMMA-Modified Ag/NaZr2(PO4)3 through In Situ Suspension Polymerization
Investigation of Zirconia/Polyacrylamide (ZrO2/PAAm) Based Nanocomposite Hydrogels with Enhanced X-Ray Radiopacity
Fabrication and Compressive Properties of Porous Ti6Al4V Alloy with Elongated Pores for Biomedical Application
Synthesis and Self-Assembly of Well-Defined pH-Responsive Block Glycopolymers
Fabrication and Biological Properties of Bionic Structure Porous Alumina Ceramics with Spherical/Lamellar Pores
Effects of Niobium Oxide Addition on the Mechanical Properties of Glass Ionomer Cement
Controlling Pore Size of Tissue Engineering Scaffolds Fabricated by Electrospinning and Phase Separation
Controlled Release of Growth Factors from Tissue Engineering Scaffolds Made by Positive and Negative Voltage Electrospinning
Cytocompatibility of Fe-O Thin Film Prepared by Unbalanced Magnetron Sputtering
Particle Size of 45S5 Bioactive Glass Affected the Enamel Remineralization
Fabrication and Characteristics of Gene-Delivering Nanodevices Based on Au-Ag@CS-FA Hybrid Particles
Excellent Cell Compatibility in Time Controlled Silk Fibroin Hydrogels
Matrix Elasticity Affects Integrin Expression in Human Umbilical Cord-Derived Mesenchymal Stem Cells
Corneal Matrix Repair Carrier with Composite Silk Protein Membrane
Preparation of Collagen/Hydroxyapatite Composite Coating on Porous Titanium Substrate and its Cellular Response
One-Step Synthesis of Water-Soluble Fluorescent Carbon Dots
Structure Changes of Coating on NiTi Alloy Prepared by Micro-Arc Oxidation in Na2SiO3 Electrolyte
Titanium Nitride Modified by Hydrothermal Treatment in Calcium Acetate Solution
Effect of Sericin Concentration on the Growth and Morphology of Escherichi Coli
Chirality Synthesis of N-Shaped ZnO Nanorods by Glacial Acetic Acid Assisted Annealing Process and Ethanol Sensing Properties
Synthesis and Characterization of Optical Active PLA Degradable Materials
Phase Compositions of a Mg-Dy-Zn Alloy Containing LPSO Structures
Symposium K: High Performance and Functional Polymer and Composite Materials
Synthesis and Characterization of Polythiophene Derivatives with Different Alkyl Substitution Groups
Microwave Absorption Properties of Solid-State Polymerization Ethylenedioxythiophene
Surface Modified UHMWPE Particles by Direct Fluorination Blended with Polyurethane for Enhancing its Wear-Resistant Performance
Preparation and Mechanical Properties of Poly (arylene sulfide sulfone)/Glass Fiber Cloth Composites
Mechanical and Thermomechanical Properties of Nylon6T/66/PPS Blends
Effects of the Coupling Agent on the Mechanical Properties of Long Glass Fiber Reinforced Polyphenylene Sulfide Composites
Structural Evolution and Mechinical Properties of Copolyamide Fibers during Thermal Annealing
Improvement of Mechanical Properties of Polyphenylene Sulfide/Carbon Fiber Composites Modified by Aminated Reinforcement
Solvent-Induced Crystallization of Polyarylene Sulfide Sulfone
Microstructure and Thermal Properties of PET/POSS Composites Prepared by In Situ Polymerization
L-Lysine-Based Dendritic Gelator Modified PMMA Nanocomposite
Effect of Orotic Acid on the Stabilization Efficiency of Ca-Zn Thermal Stabilizers for Poly(vinyl chloride)
Synthesis of Two-Component Dendritic Gelators and their Self-Assembly Behavior in MMA
Promoted Chain Diffusion of UHMWPE/HDPE Blend by High Temperature Treatment
Polymerization of Dicyclopentadiene/Styrene in PolyHIPE
Investigation of Mechanical Properties and Dye Adsorption Capacities of Novel Hydrophobic Association Nanocomposite Hydrogels
Crosslinking of Polyamide 6 by Reactive Processing
Uniformly Dispersed Poly(ethylene glycol) Functionalized Graphene Oxide/Poly(L-lactic acid) Nanocomposites with Balanced Mechanical Properties
Study on Synthesis of IPDI-Based Waterborne Polyurethane
Synthesis, Characterization and Performance of Superplasticizer with a Multi-Arm Structure
Effect of Plasticizer (DOP) on Cell Structure and Mechanical Properties of Extrusion-Foamed PVC Sheet
Negative Permittivity of CNTs–Epoxy Composites Prepared by Cryomilling
Graphene–Epoxy Composites with High Dielectric Constant Prepared by Cryomilling
Preparation of an Ultra-Thin, Highly Filled, Neutron-Shielding Material
Tensile Strength of Surface Treated PBO Fiber
Super Hydrophobic Properties of Papers Prepared from Multi-Walled Carbon Nanotubes Functionalized with Polybenzimidazole and AgNPs
Electroless Copper Plating on Polyester Fabric Modified with Silane through Supercritical Carbon Dioxide Process
Progress in Preparation of Phenolic Fibers by Electrospinning
Effect of Heat Setting Methods on Structures and Properties of High Strength Polyvinyl Alcohol Fibre
Infrared Spectral Characteristics of Azobenzene Containing Side-Chain Liquid Crystal Polymer
Microstructure Evolution of PtTi0.5Zr0.2/Ti Laminated Composites Synthesized by Hot Pressing and Rolling
A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline
Synthesis of Polythiophene Derivatives with Schiff Base Groups and Use as an Active Layer in Polymer Solar Cell Devices
Functionalization of Smart Gels with Beta-Cyclodextrin and Release Characteristics to Simulating Drugs
Fabrication and Evaluation of an Amino Modified Epoxy Coating for Anti-Scouring and Anti-Corrosion Application
An Organic Double-Layer Coating on Aluminum and Steel Substrates for Anti-Laser Protection
Research and Development in Electrospinning Theory and Technology
