Buch, Englisch, 688 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
Buch, Englisch, 688 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-03835-089-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Organizers and Supporters
Nano-Scale Materials
Fabrication and Characterization of Integrated Ultrahigh-Density Pt Nanowire Arrays within the AAO Template
Stability of Nanofluids for Heat Pipe
Polyaniline Grafted Amino-Functionalized Graphene Nanocomposite with Excellent Electrochemical Performance for Supercapacitor Electrode Materials
Solid-State Synthesis and Thiophanate Methyl Visible Light Degradation of Magnesium Doped TiO2 Mesoporous Nanomaterial
Effect of Dysprosium Content on the Magnetic Properties of Nanocrystalline (Pr0.25Nd0.75)10-xDyxFe82Co2B6 Alloys
Fabrication of Microfibrous Patterns via Electrospinning
Preparation of 1D or 3D Nano ZnO Crystals in High-Viscosity Solvent
Effect of the Ce-TiO2/Diatomite on the Photo-Catalysis Degradation of MB
Amorphous Materials
Effect of Aging Temperature on Microstructure and Hardness of CoCrFeNiTi0.5 High Entropy Alloy
Microstructure and Properties of Ni70.2Si29.8 Eutectic Alloy Produced by Directional Solidification
Fe-Based Bulk Metallic Glass with Good Soft Magnetic Properties
Hardness Regulation of Fe-Based Amorphous Composite Coatings by Laser Remelting
Influence of Laser Remelting on the Corrosion Resistance of Fe-Based Amorphous Composite Coatings
Microstructural Evolution and Hardness of CoxCrCuFeNi High-Entropy Alloys
Research of Crystallization Kinetics and Thermal Stability of W48.5Ni34Fe14.6B2.9 Amorphous Ribbons
Advanced Fibers and Nano-Composites
TEMPO-Mediated Oxidation of Bacterial Cellulose in Buffer Solution
Facile Preparation of Gradient Structure Bacterial Cellulose Using Potato Starch
Preparation and Properties of Cotton Fiber/Poly(lactic acid) Composites
Effect of Two-Step Treatments on Interfacial and Mechanical Properties of Sugarcane Rind Fiber/Natural Latex Biodegradable Composites
Anti-Corrosive Epoxy Primer Modified with Nano Particles
Preparation and Characterization of TPU Toughened PLA Elastic Fibers
Preparation and Biological Characterization of Electrospun Aligned Poly(butylene carbonate) Nano-Fibers
Fabrication and Properties of Porous Scaffolds of PLA-PEG Biocomposite for Bone Tissue Engineering
Preparation and Characterization of Ethylene-Octene Copolymer/Modified Nanosilica Composites by Radiation Processing
Morphology Control of Polyimide Fibers by Phase Separation under Different Coagulation Bath Conditions
Improving Preferred Orientation and Mechanical Properties of the PAN-Based Carbon Fiber Precursors by Using Saturated Steam Stretching Process
Facile Fabrication of Super-Hydrophobic Surface on Aluminum and its Effects in Accelerating Underwater Bubble Bursting
Raman Spectroscopy Studies on the Microstructure Evolution from Cellulose to Carbon Fiber
Design of ACF Microwave Absorbing Composites with Triangle Patches and Circular Aperture Elements
Study on the Properties of Melamine Cyanurate Modified Polyamide 6 Nanocomposites with Different Dimensional Siliciferous Particles
Preparation and Properties of Recycled-Polyester Nanocomposite Fibers Synergistic Modified with Phosphorus Containing Flame-Retardant and a-Zirconium Phosphate
Study of the Hydrophobic Properties of the Surface of an Enamel Material
Preparation and Properties of BC/PPy/TiO2 Composite Membrane
Cellulose Nanofiber-Supported Polyaniline Nanocomposite Conductive Film and its Conductive Properties
Glutaraldehyde-Cross-Linked Poly(acrylic acid-co-acrylamide)/Poly(vinyl alcohol) Superabsorbent Membranes
Preparation and Characterization of Poly(vinylidene) Fluoride Membranes Reinforced by Modified Nano-SiO2 Particles
Preparation and Characterization of Polyacrylonitrile Membranes with High Strength via Thermally Induced Phase Separation Process
Application of Orthogonal Design on Optimization of Spinning Conditions for BTDA-TDI/MDI Ternary Copolyimide Fiber
Preparation and Characterization of Polyacrylonitrile in Aqueous Slurry Polymerization
Study on Poly(Ether Imide)/Amino-Modified Sillica Hybrid Membranes
Strontium-Substituted Hydroxyapatite Nanocrystals Synthesized in Ultrasonic Field: Use for Protein Adsorption
A Novel Method for the Synthesis of Amphiphilic Copolymer: PHEMA-b-PDMS-b-PHEMA
Synthesis of Allyl Functionalized Telechelic PVP by Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization
Effect of Additive on the Performance of PVDF Membrane via Non-Solvent Induced Phase Separation
Study on Preparation and Property of High Thermal Oxidation Stability PPS/SiO2 Fiber
Study on Spinnability of UHMW/PAN Dope in DMSO
Fabrication of Polyvinylpyrrolidone/Boehmite Nanofibers by Electrospinning
The Effect of Bacterial Cellulose (BC) Fiber Content on the Properties of BC Fiber Reinforced Nanocomposites
Advanced Materials Processing
Preparation and Study on Nano-Ag/SnO2 Electrical Contact Material Doped Rare Earth Element
Effects of Cold Rolling Reduction on Deformation Modes in Mg-3Al-1Zn Magnesium Alloy
Study on the Flow Field of Friction Stir Welding of AZ31 Magnesium Alloy Based on the Temperature Variation
Effect of Brazing Flux Pb on Microstructure and Mechanical Property of CMT Weld-Brazed Lap Joint of 5052 Aluminum Alloy to Galvanized Q235 Steel
Influences of Carbon and Nitrogen Content on the Precipitation of 18Cr18Mn Steel
Study on Pack Rolling and Annealing Process for Ultra-Fined Grain Austenite Stainless Steel
Effect of Deformation Ratio on Microstructures and Properties of High Nitrogen Martensitic Stainless Steel
Microstructure Evolution in Isothermal Heat Treatment of 0Cr32Ni7Mo4NDuplex Stainless Steel
Effects of Melt Cyclical Superheating Conditions on the Microstructure of FeSi2 Alloy
Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment
Recrystallization and Precipitation of ß-Mg17Al12 Phase of the Cold-Rolled Mg-9Al-1Zn Alloy Strip during Isothermal Annealing
Sliding Wear Behavior of Forged, Uncoated and Laser Nitrided LMD TC18 Titanium Alloy
Investigation on Micro Components Fabricated by Micro Powder Injection Molding
Effect of Temperature on Low Energy Consumption Electrolytic Preparation of Manganese Dioxide Using Oxygen Depolarized Electrode
Hydrodynamic Lubrication during Non-Sinusoidal Oscillation for a Continuous Casting Mould
Physical Properties, Compatibility and Morphology of Hydrogenated Nitrile Rubber/Fluoroether Rubber Blends
Electron Beam Additive Manufacturing and its Applications in Aerospace Field
Microstructure and Mechanical Properties of Brazed Tungsten/Steel Joint for Divertor Applications
Investigation on the Micro-Structures and Properties of the P20 Steel Surface after Electrical Discharge Machining
Development and Application of Multivariable Composite Controller Based on Fuzzy Switching for Ultra Fast Cooling System
Effect of Ti Content on the Microstructure and Properties of TiC/TiB2-FeNiCr Composite Prepared by Thermite Reaction
Hot Compression Deformation Behaviors and Microstructure Evolution for Brittle Au-20Sn Eutectic Alloy
Magnetic Properties of Cyano-Bridged Compound Co [Fe(CN)5NO]·5H2O
Magnetic and Mo¨ssbauer Studies on Mixed-Metal Cyano-Bridged Compounds GunM1.5-n[Fe(CN)6]·xH2O(M=Ni, Gu)
Microstructure and Mechanical Properties of Plasma Arc Welding Joint for Laser Melting-Deposited AerMet100 Ultrahigh-Strength Steel
Fabrication of Cu Heat Sink on Silicon Substrate Using Direct Laser Sintering
Microstructure Evolution of Laser Direct Deposited Ti-5Al-2Sn-2Zr-4Mo-4Cr Titanium Alloy
Surface Coating and Technology
Preparation of MAO Ceramic Coating on Ti-6Al-4V Alloy Surface
Properties of TiAl/TiAlN/TiAlCN Films Deposited by Arc Ion Plating on GCr15 Rings
Microstructure, Mechanical and Tribological Properties of the Tialn Coatings after Nb and C Dual Ion Implantation
Laser Ablation Resistance Behavior of Organosilicone Composite Coating on Various Substrates
Effect of CO2 on Anti-Corrosion Property of a Polyurea Coating Modified with Organosilicone
Progress in Novel Composite Thermal Barrier Coating
Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System
Diffusion Behavior of Interface between 6061 Aluminum Substrate and Ni–5wt.%Al Coating
Electrochemical Impedance Spectroscopy (EIS) Study of Nano-Composite Polyurea Coating under the Wet-Dry Cyclic Conditions
Investigation of Morphology and Electrical Properties of Contact Materials after Airtightness Test
Research and Application Status of Atmospheric Plasma Spray Torch in Internal Feedstock Mode
Microstructure and Properties of Zirconia Co-Doped with Yttria and Cenosphere Coating Prepared by Air Plasma Spraying
SHS Reactive Arc Spray - A New Method to Prepare Multiphase Ceramic Coatings
Anti-Ablation Property of MoSi2 Coatings Deposited by APS
Materials Modeling and Simulation
Microscopic Phase Field Study on the Kinetics of Order-Disorder Transition of APDBs Formed between DO22 Phases during Stress Aging
Molecular Dynamics Simulation of Porous Layer-Induced Stress in a-Iron Single Crystal and Twin Crystal
Helium Diffusion in Tungsten Studied by Molecular Dynamics Method
Multiple Helium Atoms Diffusion in Tungsten: A Molecular Dynamic Simulation
Modeling of Flow Fields of Different Delivery Chamfers in Spray Forming Process
Prediction Model of Pressure Distribution under Floating Strips
FEM Analysis of the Deformation Behavior at Thickness Direction in Laboratory Plate Hot Rolling
Prediction of the Hardness of Cu-3Ti-1Cr Alloy Using Least Square Support Vector Machines
Prediction Model for Adhesive Thickness-Dependence of Bonding Structures for Aeronautic Lightweight Alloy
Application of Dynamic Deadband Eccentricity Filter in GM-AGC System
A Calculation Model of Carbon Diffusion Coefficient in the Austenite for Spheroidal Graphite Cast Iron
Design and Realization of the Process Tracking System for Plate Plant
Macroscale Modeling of Multi-Physics Fields during Vacuum Arc Remelting of Ti-6Al-4V
Crystal Plasticity Finite-Element Simulation of Single Phase Titanium Alloy with 3D Polycrystalline Models
Materials Characterization and Evolution
Compression Property of C/SiC and Inconel X-750 Springs from Room Temperature to 1000°C
Electrochemical and Salt Spray Corrosion Behavior of Copper Alloy Contact Wires in Chloride Solution
Fractographical Investigation on High-Cycle Fatigue Behavior of Direct Aging GH4169 Superalloy
Study on Corrosion Resistance of Several Fe-Based Amorphous Alloys
Synthesis and Characterization of Itaconic Acid Doped Polyaniline Nanorods
Synthesis and Characterization of Monodisperse and Micro-Structured Polyaniline by Soap-Free Emulsion Polymerization
Effect of Two Heat Treatment Processes on Microstructures and Tensile Behaviors of Ni-Based Superalloy K465
