Buch, Englisch, 598 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1200 g
ISBN: 978-3-03835-393-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Symposium A: Energy Related Composites and Nano-Materials
Recent Advances in Graphene Preparation Methods
Controlled Growth of ZnO with Different Morphologies on Zn Foils by a Simple Aqueous Solution Method
Morphology of Nanotube Governs the Photoelectric Performance
Preparation and Electrochemical Properties Research of Vanadium-Sol Modified LiFePO4 Cathode Material for Lithium Ion Batteries
Efficient Visible-Light Photocatalysts from Sensitized TiO2 Nanospheres
Structural and Optical Properties of Cu2MnSnS4 Thin Film Fabricated by Sol-Gel Technique
Study of Structural and Optical Properties of Cu2ZnSnS4 and Cu2ZnGeS4 Thin Films Synthesized by Sulfurization of Stacked Metallic Layers
Lithiation/ Delithiation Process of Silicon-Carbon Composites Prepared by Mechanical Alloying
Defect-Controlled Gas Sensing Property of Nanostructured ZnO Films
Preparation and Heat Transfer/Thermal Storage Properties of High-Temperature Molten Nitrate Salts
Sintering Properties of Apatite-Type Lanthanum Silicate Electrolytes
Characterization of Si/Artificial Graphite Composite Made by Mechanical Alloying for Li-Ion Cells
Fabrication of Silica Monoliths with Hierarchically Porous Structure from Freeze-Drying
Preparation of NiO Microspheres by Hydrothermal Method and its Electrochemical Capacitive Properties
Preparation of Nickel and Manganese Dioxide by Co-Precipitation and its Electrochemical Capacitive Properties
Preparation of Polyvinylidene Fluoride (PVDF) Triboelectric Nanogenerators with Different Polymer
Size Dependence of Evaporation Temperature by Bond Number Calculation
Influence of Surface Chemical Groups and Content of Carbon Nanotubes on Electrical Property of Epoxy Resin Composites
Design and Simulation of a Bending Actuator Based on Super-Aligned Carbon Nanotube/Polymer Composites
Structure and Electrochemical Properties of La1-xBaxCoO3 Powders as Negative Electrode Materials for Ni/MH Batteries
Fluoride Adsorption Properties of CeO2 Powders and Al Foam Loaded CeO2
Preparation of Bead-on-String Nanofibers and its Application for the Removal of Bisphenol A
Preparation and Characterization of Polylactic Acid Coating on the Surface of Magnesium Alloy
Effect of the Difference in Dielectric Constant of the Phases on Dielectric Property of the Composites
Influence of Electron-Phonon Coupling Coefficient on Properties in Femtosecond Laser Ablation
Symposium B: Photocatalytic Materials and its Applications in the Field of Energy and Environment
Entanglement of CeO2 Nanorods and Graphene Nanoribbons and their Properties Studies of Nanocomposites
Enhanced Photocatalytic Properties of Ag-Modified Mg-Doped ZnO Nanocrystals Hybridized with Reduced Graphene Oxide Sheets
Preparation and Photocatalytic Property of Dendritic TiO2/VOx Nanofibers
Effect of Sputtering Power on Photocatalytic Activity of Thin TiO2 Films
Synthesis of TiO2/RGO Nanocomposites by Hydrothermal Method and their Photocatalytic Activity Research
Symposium C: Minerals and Resources, Materials for Oil-Gas Field Engineering, Structure Building Applications
Effect of Particle Size of Natural Flake Graphite on the Size and Structure of Graphene Oxide Prepared by the Modified Hummers Method
Development of Functional Polymer as Oil-Well Cement Retarder
Structural Features of Fibri-Form Silica from Short Chrysotile Fibers by Acid-Leaching
Seawater Corrosion Resistance of Low Heat Portland Cement Concrete
Stuy on Microwave-Assisted Grinding of Low-Grade Ludwigite
Modified Mechanism and Properties of Water-Soluble Sodium Silicate for Oil and Gas Field
Preparation of Al2O3 from the Nepheline Ore of Nanjiang County, Sichuan Province of China
Biomass Reduction Roasting-Magnetic Separation of Low Grade Goethite
Research on Fatigue Failure of Steel E4330 for Fluid Cylinder
Pitting Behavior of 304 Stainless Steel in Simulated Condensate in Refining High Sulfur and Salt Heavy Oil
Synthesis and Properties of the Poly(methyl methacrylate-acrylamide)
Synthesis and Properties of the Poly(styrene-acrylic acid)
Effect of Heat Treatment on Corrosion Resistance of 0Cr18Ni9Ti Stainless Steels
Study on the Gold Leaching Process by Potassium Ferricyanide
Formation and Mitigation of BaSO4 Scale in Oil Fields
Preparation and Characterization of Microporous Activated Carbon from Raw Petroleum Cokes
Preparation and Characterization of Microporous Activated Carbon from Raw Anthracite
Preparation of High Purity Spherical Silica Powder from Silica Fume
Changes of Microstructure and Properties of G105 Drill Pipe in H2S Environment
Thermodynamic Study of Ag-Au-Gd, Tb Ternary Systems
Research on Corrosion Rate of Sucker Rod Steel 20Ni2Mo in Wet H2S Environment
Microstructure and Properties of X100 High Strength Pipeline Steel
Process of Salicylic Acid-Type Composite for Rare Earth Ions
Application of Ultrafine Weighting Materials in High-Density Oil-Based Drilling Fluid Technology
Research and Preparation of High Quality Polysilicon Ingots and Multicrystalline Silicon (mc-Si) Cells
Effects of Synthesis Temperature and Holding Time on the Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Cathode Material Using Rheological Phase Method
In Situ Synthesis of Graphitized-Carbon Coated Li4Ti5O12/C Anode for High-Rate Lithium Ion Batteries
Preparation of New Multi-Component Nanometer Manganese Dioxide/Carbon for Air Electrode
Removal of Nickel (II) Ion from Wastewater by Modified Maifanite
Preparation and Optical Property of ZnS:Mn/XO2 (X=Ti, Si) Nanoparticles with Core/Shell Structure
Combustion Synthesis and Luminescence Properties of Li2Ca1-x-ySiO4: xEu3+, ySm3+ Phosphors
Corrosion Behavior of P-Coated Biomedical Pure Magnesium
Preparation and Electrical Conductivity of Polythiophene/Microcrystal Muscovite Layered Composites
Effects of Current Density on the Properties of Microarc Oxidation Coatings Formed on Aluminum Alloy in Silicate-Na2MoO4 Electrolyte
Effects of Sr2+ Doping on the Luminescent Properties of CaTiO3: Pr3+
Symposium D: Environment Technologies and Functional Materials, Environmental Emission and Protection
Life Cycle Analysis on Carbon Emission Reduction and Energy Saving by Using Slag as Alternative Materials in Cement Production
Analysis on the Global Warming Potential of Cement Concrete Pavement in China
Scenario Analysis of Denitration for Chinese Coal-Fired Power Generation
Research Progress on Ecological Design Methods of Materials
Life Cycle Assessment of Cement Clinker Production Using Coal Gangue as Alternative Raw Material and Fuel
Removal of Metal Ions from Aqueous Solutions by Microcapsules Prepared by 8-Hydroxy-Quinoline with Polystyrene
Research on Life Cycle Energy Consumption and Environmental Emissions of Light-Duty Battery Electric Vehicles
Preparation of Fly Ash/CeO2 Composite and its Adsorption Kinetics for Congo Red Dye from Aqueous Solution
Multi-Scale Polyimide/Carbon Fibers Hybrid Filters for Hot Gas Filtration
Potentials for Denox in Chinese Cement Industry with the Life Cycle Assessment Method
Influence of Process Conditions on the Structure and Hydraulic Activity of Air-Cooling Blast Furnace Slag
Immobilization of Hydroxyapatite Particles onto PET Filter Fabric via Heat Treatment
Adsorption Properties of the Macro/Nano-Clay in Crystal Violet Solution
Development of Chinese Exergy-Based Characterization Factors for Emissions in Life Cycle Impact Assessment
Selection of Green Building Materials for Energy-Saving Exterior Windows
Energy Saving Property of Heat-Reflective Coatings on Temporary Buildings
Evaluation and Selection Research on External Wall Insulation Materials Based on Green Building Energy Conservation
Life Cycle Inventory of Gangue as Alternative Raw Materials
Analysis of Cobalt Substance Flow through China in Year of 2012
Utilization of Municipal Sludge in the Calcination of Cement Clinker
Effect of pH and Concentration of Ca2+ on Spherical Calcium Carbonate Crystallization by Continuous CO2 Gas Bubbling into Phosphogypsum Leaching Solution
Life Cycle Assessment of Metallic Copper Produced by the Pyrometallurgical Technology of China
Theoretical Calculation and Experimental Study on the Forming Heat of Cement Clinker Made from Steel Slag
SiC/Cu Composite Prepared by Spontaneous Infiltration of Copper Alloy into Porous SiC Ceramic
Preparation of Silicon Carbide Reticulated Porous Ceramics by Organic Foam Impregnation
Influence of Fineness on Activity Index of Blast Furnace Slag with Different SiO2/Al2O3
Utilization of Serpentine Resources in China
Visible-Light Photocatalytic Performance of N/RH/TiO2 Complex Materials
Influence of Sputtering Power on the Structure, Optical and Electric Properties of Cu3N Films
Influence of Substrate Temperature on the Al and Zr Co-Doped ZnO Thin Films Prepared by RF Magnetron Sputtering
Accounting Model of CO2 and its Application in Integrated Iron and Steel Enterprises
Structure and Photoelectric Properties of Cu3N Thin Films by Reactive Magnetron Sputtering
Effects of Nutrition on Mild Steel Corrosion by Sulfate Reducing Bacteria under Aerobic Environment
Welding Performance of Tungsten Electrodes with Different Contents of Rare Earth Oxides
