Buch, Englisch, 690 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1290 g
Buch, Englisch, 690 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1290 g
ISBN: 978-3-0357-1453-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Polymer Matrix Composites (PMC)
Evaluation of DOPO and Nano-Silica Modified Epoxy Resin Systems as Low Viscous, Flame Retardant Additives for Infusion and Injection Processing of Carbon Fiber Reinforced Plastics
Comparison of Low-Velocity Impact Damage Behavior of Unidirectional Carbon Fiber-Reinforced Thermoset and Thermoplastic Composites
New Silicone-Resin-Compounds for Casting and Molding Applications
Fatigue Behaviour of Triaxial Braided Composites under Tension-Tension and Compression-Compression Loading
Investigation on the Crack Evolution in Glass-Fiber Laminates Depending on the Stacking Sequence
Development of a Modular Draping Test Bench for Analysis of Infiltrated Woven Fabrics in Wet Compression Molding
Tailor Made Hybrid Laminates Based on UD-Tapes - A Way to Efficient Thermoplastic Components
Experimental Characterization of the Structural Deformation of Type IV Pressure Vessels Subjected to Internal Pressure
Textile-Integrated Elastomer Surface for Fiber Reinforced Composites
Dispersion of Mechanical Properties at Nanoscale Studied by Indentation Mapping of a Fiber Reinforced Composite
Rotational Moulding and Mechanical Characterisation of Micron-Sized and Nano-Sized Reinforced High Density Polyethylene
Chapter 2: Metal Matrix Composites (MMC)
Influence of the Process Parameters on the Penetration Depth of the Reinforcing Phase during Composite Peening for the Production of Functionally Graded Metal Matrix Composites
Influence of Distinct Manufacturing Processes on the Microstructure of Ni-Based Metal Matrix Composites Submitted to Long Thermal Exposure
Investigation of the Creep Resistance of a Spray-Compacted Si-Particle Reinforced Al-Based MMC (Dispal® S270)
High-Speed Laser Melt Injection of Tungsten Carbide in Highly Conductive Copper Alloys
Cold Roll Cladding of Carbon Steels
Heat Exchange Structures Based on Copper/CNT Composite
Effect of Processing Conditions on Bonding Strength at Al(Si)/Diamond Interfaces
Agglomerated Tungsten Carbide: A New Approach for Tool Surface Reinforcement
Chapter 3: Ceramic Matrix Composites (CMC)
Investigation of Statistical Distribution of C/C-SiC Composite’s Mechanical Properties
Injection Moulding of Oxide Ceramic Matrix Composites: Comparing Two Feedstocks
Powder Injection Molding of Oxide Ceramic CMC
Modification of the Thermoset Injection Moulding Process for Shaping to Increase the Fibre Length in C/C-SiC Ceramics Produced by the LSI Process
Evaluation of Ceramic Matrix Composite Edge and Surface Damage
Custom-Made Reinforcement Structures Made of Inorganic Fibers Challenges, Chances and Technical Approaches
Influence of Initial Fibre Length and Content Used in the Injection Moulding of CFRP on the Properties of C/C and C/C-SiC Composites
Chapter 4: Hybrid Structures and Materials
One-Sided Resistance Spot Welding of Plastic-Metal Hybrid Joints - Characterization of the Joining Zone
Metal Polymer Connections: Laser-Induced Surface Enlargement Increases Joint Strength
Influence of Process Parameters, Surface Topography and Corrosion Condition on the Fatigue Behavior of Steel/Aluminum Hybrid Joints Produced by Magnetic Pulse Welding
Sintered Connection - A Steel/CFRP Connection Module
Thermoplastic Multi-Material Nonwovens from Recycled Carbon Fibres Using Wet-Laying Technology
Influence of Welding Temperature and Weathering on Inductive Welded Hybrid Joints Made of Steel and TP-FRPC
Surface Modification of Polymeric Fibers to Control the Interactions with Cement-Based Matrices in Fiber-Reinforced Composites
Location-Dependent Mechanical Properties of In Situ Polymerized Three-Dimensional Fiber-Metal Laminates
Ultrasonic Torsional Welding of Metal/Glass Ceramics Joints
Development of Tailored Hybrid Laminates: Manufacturing of Basalt Fibre Reinforced Thermoplastic Orthoses with Aluminum Thin Sheets
Forging of Copper and Iron Plates by the Damascus Technique
Temperature Dependency of the Deformation Behavior of Hybrid CFRP/Elastomer/Metal Laminates under 3-Point Bending Loads
Polymer-Steel-Sandwich-Structures: Influence of Process Parameters on the Composite Strength
Chapter 5: Compounds, Laminated Materials, Sandwich Structures, Cellular Materials
Lightweight Potential of 3D Endless Fiber Reinforcement of Polyurethane Foam Cores with Spacer Fabrics in Hybrid Sandwich Structures with Fiber Reinforced Thermoplastic Facings
Analysis of the Macroscopic Behaviour of PMI Foam
Modeling of Organosandwich Structures Using an RVE Model of the Thermoplastic Honeycomb Core
Parameter Selection for Peel Strength Optimization of Thermoplastic CF-PA6 for Humm3TM
Development of a Laser Structuring Process for Ceramic Coatings on Injection Molding Tools Produced by MOCVD
Realization of Diamond/Metal Laminates through Brazing of Freestanding Diamond Foils
Environmental Compatibility of Carbon Reinforced Concrete: Irrigated Construction Elements
Influence on the Microstructure of Powder Metallurgical Metal Foam by Means of Mechanical Alloying
Chapter 6: Joining, Manufacturing Technologies, Additive Manufacturing, Handling
Ultrasonic Assisted Thermal Direct Joining of Thermoplastic Composites and Aluminum for Multi Material Design
Influence of Composition on Mechanical Properties of Additively Manufactured Composites Reinforced with Endless Carbon Fibers
Surface Topography Influences on the Fatigue Behavior of Composite Joints
Deflection Sheaves for Elevator Application in Lightweight Design
Generating Permanent and Temporary Material Compounds in FLM Processes
Analysis of a Process Approach for Production of Triaxial Braids with Locally Customized Filler Yarn Count
Comparison of Electroplated Ni and PVD Ni Coating Layers after Soft Soldering Process
Manufacturing CFRP-Parts Using a Modified Co-Curing Method – Fundamental Experimental Analysis
Temperature- and Time-Dependent Penetration of Surface Structures in Thermal Joining of Plastics to Metals
Quasi-Static Characterization of Polyamide-Based Discontinuous CFRP Manufactured by Additive Manufacturing and Injection Molding
Adhesive-Free Bonding of Web-Like Plastic-Metal Combinations at Low Temperatures
Chapter 7: Structural Health Monitoring (SHM)
Scalable Monitoring System for the Localization of Damaging Events in Thin-Walled CFRP Structures Based on Acoustic Emission Analysis and Neural Networks
Influence of Carbon Roving Strain Sensory Elements on the Mechanical Properties of Carbon Fibre-Reinforced Composites
Influence of Sputtering Temperature and Layer Thickness on the Electrical Performance of Thin Film Strain Sensors Consisting of Nickel-Carbon Composite
Chapter 8: Coatings
BN-Based Fiber Coatings by Wet-Chemical Coating
Chemical Vapor Deposition of AlZrN Coatings by the Reaction of In Situ Produced ZrCl4 and AlCl3 with NH3
Thermal Stability of Natural Fibers via Thermoset Coating for Application in Engineering Thermoplastics
Tribological Properties of Multi-Layer a-C:H:W/a-C:H PVD-Coatings Micro-Structured by Picosecond Laser Ablation
Chapter 9: Modeling, Simulation, Material Design
Efficient Characterization and Modelling of Material Behaviour of LFT for Component Simulations
Mechanical Design of Intersection Points of Tailored Fiber Placement Made Carbon Fiber Reinforced Plastic Truss-Like Structures
Effective Modeling of Load Applications in Composite Structures - Accuracy, Complexity, Computational Time
Material Characterization and Compression Molding Simulation of CF-SMC Materials in a Press Rheometry Test
Efficient Multiscale Methods for Viscoelasticity and Fatigue of Short Fiber-Reinforced Polymers
Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes
A Novel Simulative-Experimental Approach to Determine the Permeability of Technical Textiles
Flexible Graph Syntax for the Topology Optimization of Crashworthiness Profile Structures Made from Thermoplastic Composites
Sensitivity Study of Material Input Data on FE Forming Results for Wrinkling and Shearing of Fiber Reinforced Thermoplastic Parts
Chapter 10: Recycling, Repair
Innovative rC Staple Fiber Tapes - New Potentials for CF Recyclates in CFRP through Highly Oriented Carbon Staple Fiber Structures
RecyCarb: Process Optimization and On-Line Monitoring in the Recycling of Carbon Fibre Waste for the Re-Use in High-Grade Fibre Reinforced Plastics
Novel Approach in B-Staging of an Epoxy Resin for Development of rCF Non-Woven Prepregs for RTP Processing
Development of a Novel Textile Process for the Production of Highly Oriented Nonwovens Made from Recycled Carbon Fibres
Chapter 11: Applications
Liquid Metal Embrittlement of Copper Brazed Plate Heat Exchangers
Development of a Variable Gridshell for Application in Mobile Architecture
CMC-Jacketed Piping for High-Temperature Applications: Concept, Laboratory Tests and Large-Scale Application Test
Chapter 12: Testing and Characterization, Quality Assurance
Experimental Characterization of the Fiber Angles of Multiple Curved Laminate Segments Using Prepreg-Based Carbon Fiber Reinforced Polymers as a Structure for a Non-Engaging Bellows Coupling
Development of a 25kN In Situ Load Stage Combining X-Ray Computed Tomography and Acoustic Emission Measurement
Assessment of Secondary Fiber Print-Through Effects on Class-A CFRP Parts Produced with Highly Cost Efficient Processes
Microscopic Measurement of Strain Fields with Digital Image Correlation and Comparison to Finite Element Modelling
Passive Thermography for Detection of Damaging Events during Quasi-Static Tensile Testing
Region-of-Interest X-Ray Tomography for the Non-Destructive Characterization of Local Fiber Orientation in Large Fiber Composite Parts
Optimization of the Specimen Geometry of Unidirectional Reinforced Composites with a Fibre Orientation of 90° for Tensile, Quasi-Static and Fatigue Tests
Model-Based Quality Control System for Error Reduction in the Thermoforming Process
Combined In Situ X-Ray Computed Tomography and Acoustic Emission Analysis for Composite Characterization - A Feasibility Study
Controlling Moisture Content of Natural Fibres in RTM-Process
Mechanical and Fracture Mechanical Properties of Matrix-Reinforced Carbon Fiber Composites with Carbon Nanotubes
Novel Approach for the Lifetime Prediction of Composite Materials under Static Loads
Testing of Composite Material for Transport Tanks for LNG
Chapter 13: Renewable Raw Materials, Sustainability
Potential for Use of Veneer-Based Multi-Material Systems in Vehicle Structures
Composite Materials Made of Basalt Fibres and Biobased Matrix Material for Technical Applications
Novel Lightweight Semi-Finished Products Made of Poplar Veneer Plywood with Basalt Fibre Reinforcement
Bio-Based and Renewable Filler Materials for Thermoset Compounds
Efficient Process Chain for Processing Natural Fiber Reinforced Thermoplastics
