Sonstiges, Englisch, Band Volume 742, 840 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
Sonstiges, Englisch, Band Volume 742, 840 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-0357-2198-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Rigidity and Damage Evolution of Long Fibre Reinforced Polypropylene Made by Direct Processing Route (LFT-D)Fiber/Matrix Adhesion in Glass Fiber Reinforced Inorganic-Organic Polyurea/Polysilicate ResinsUltrasonic-Impregnation for Fiber-Reinforced Thermoplastic Prepreg ProductionUse of Recycled Waste Paper as Fiber Reinforcement for Polypropylene - Examination of Mechanical Properties in Comparison to NFRPProcessing of Carbon Nanotubes and Carbon Nanofibers towards High Performance Carbon Fiber Reinforced PolymersInfluence of the Manufacturing Process (Comparison MuCell and Direct-LFT) of Foamed and Fiber Reinforced Polymer Sandwich Structures on the Fiber LengthFormulation and Manufacturing of Polybenzoxazine CompositesInfluence of the Chemical Functionalisation of Glass Fibre Surfaces on the Mechanical Properties of Continuous Fibre Reinforced ThermoplasticsDevelopment of Thermoplastic Composites for Visible Parts in AutomotiveSurface Pretreatment of Fiber-Reinforced Plastics via VUV RadiationToughening of Glass Fiber Reinforced Unsaturated Polyester Composites by Core-Shell ParticlesTailored Inserts Based on Continuous Fibre for Local Bearing Reinforcement of Short Fibre Thermoplastic ComponentsQuality Controlled UD Tape Production for the Individualised Production of Load Optimised Thermoplastic Composite PartsAdaptation of TiC Hard Particles Properties and Morphology in Metal Matrix Composites by Refractory ElementsManufacturing of Hard Composite Materials on Fe-Base with Oxide ParticlesHigh Strain Rate Compression Testing of Hot-Pressed TRIP/TWIP-Matrix-CompositesTi/B4C Composites Prepared by In Situ Reaction Using Inductive Hot PressingPreparation of Titanium Metal Matrix Composites Using Additive ManufacturingComposite Peening - A Novel Processing Technology for Graded Reinforced Aluminium Matrix CompositesMechanical Properties of Aluminum-Matrix-Nanoparticle-CompositesSilver/Diamond Composite Material - Powder Metallurgical Route and Thermo-Physical PropertiesContinuous Powder Extrusion for Fabrication of Carbon Fibre Reinforced AluminiumDevelopment and Characterization of Mg-SiC Nanocomposite Powders Synthesized by Mechanical MillingInfluence of Ti and Zn on Particle Incorporation of AlB2, B and B4C Particles in Aluminum Using the Stir Casting ProcessMechanical Properties of AlSi12-Based Metal Matrix Composites with Layered Metallic Glass RibbonsDevelopment of a TiCp Reinforced Ni-Based Superalloy MMC, with High Creep Resistance and Reduced WeightIntrinsic Aluminum CFRP Hybrid Composites Produced in High Pressure Die Casting with Polymer Based Decoupling LayerThe Development of Lead-Free Sliding Contacts Based on Bronze-Graphite Composites through Powder Injection MouldingCharacterization and Simulation of Bending Properties of Continuous Fiber Reinforced C/C-SiC Sandwich StructuresManufacturing and Properties of Tungsten Carbide-Oxide CompositesProcess Development for the Ceramic Injection Molding of Oxide Chopped Fiber Reinforced Aluminum OxideHow to Tame the Aggressiveness of Liquid Silicon in the LSI ProcessInfluence of Hardener Content and Curing Parameters on the Microstructure and Mechanical Properties of Porous C/C CompositesNatural Fibre Reinforced Bioplastics - Innovative Semi-Finished Products for Series ProductionHigh-Performance Natural Fiber Composites Made from Technical Flax Textiles and Manufactured by Resin Transfer MoldingHigh Performance Green Composites for Green TechnologiesDevelopment of Bio-Based Self-Reinforced PLA CompositesOptimization of Corrosive Properties of Carbon Fiber Reinforced Aluminum Laminates due to Integration of an Elastomer InterlayerCATPUAL - An Innovative and High-Performance Hybrid Laminate with Carbon Fibre-Reinforced Thermoplastic PolyurethaneMaterial Selection and Process Configuration for Free-Form, Voluminous and Textile-Based Multi-Material-Design by the Example of a Bucket SeatMicro-/Mesoporous Polymer-Derived Ceramic Structures Using Molecular PorogensMaterial Selection for CFRP-Aluminium-Foam-Sandwiches Manufactured by a PUR Spraying ProcessDetermination of the Damping Characteristics of Fiber-Metal-Elastomer Laminates Using Piezo-Indicated-Loss-Factor ExperimentsDamascus Steel Inlay on a Sword Blade - Production and CharacterizationImproved Adhesion Strength of Metal Textile Composites by Surface Texturing Using TIG Arc or CW Laser ProcessTFP Reinforced Metal - One Way to Increase the Specific StrengthCharacterization of Hybrid Joining Techniques for FRP/Steel-Structures under Combined Mechanical and Thermal LoadingInfluence of Laser Surface Treatment for Process-Integrated Joining of Textile Reinforced Thermoplastic Composites to Metal SheetsMechanical Behavior of Loops with Small DiametersInjection Molded Aluminum-Polymer-Composites - Integral Lightweight Structures with PotentialPolyelectrolyte Treatment of Cellulose Fibers for the Manufacture of Novel Bio-Hybrid Fiber Composites (Bio-HFC) for Lightweight ApplicationsUltrasonic Torsion Welding of Aging Resistant Al/CFRP Joints - Concepts, Mechanical and Microstructural PropertiesAspects of Preloaded Bolted Joints of Fiber Reinforced Polymers and MetalsCharacterization of the Bonded Connection in Hybrid-Steel-GFRP-LaminatesDeposition of CVD Diamond Coatings on Carbon Fiber Composite SubstratesYttria-Stabilized Zirconia Thin Films via MOCVD for Thermal Barrier and Protective Applications in Injection MoldingEntrapment of Hard Particles into Cr(VI)-Free Conversion Layers of Electrodeposited Zinc Coatings to Improve Corrosion ResistanceAnodic Oxidation of Carbon Fiber Surfaces: Influence of Static and Dynamic Process ConditionsSurface Characterization of Carbon Fibers by Atomic Force Microscopy: Roughness Quantification by Power Spectral DensityWetting Behavior of Carbon Fibers: Influence of Surface Activation and Sizing Type3rd Generation Hot-Dip Galvanized Steel Sheet for Automobile Manufacturing - Interface Reactions between Zinc and Metal OxideAn Overview of Impregnation Methods for Carbon Fibre Reinforced ThermoplasticsAnalysis of the Effects of Raster Orientation in Components Consisting of Short Glass Fibre Reinforced ABS of Different Fibre Volume Fraction Produced by Additive ManufacturingIn-Line Integration of Sensors in Thermoplastic Composite Structures Using Novel Continuous Orbital Winding TechnologyTorque-Fiber-Winding (TFW)-Procedure: Manufacturing of Textile-Based Unidirectional Prepreg for Raw Material and Material Development of Carbon Fibre Reinforced ThermoplasticsOne Step Production of Bicomponent Yarns with Glass Fibre Core and Thermoplastic Sheath for Composite ApplicationsMechanical Properties of Co-Extruded Aluminium-Steel CompoundsDevelopment of a High Pressure Die Casting Tool for Partial Integration of Glass Fiber StructuresHybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer MouldingNozzle and Hot Runner Systems for Injection Moulding Machines for the Manufacturing of Moulded Thermoplastic Composite Parts with Skin-Core Structure (Sandwich Mouldings)FE-Based Design of a Forging Tool System for a Hybrid Bevel GearDevelopment of Nonwoven Preforms Made of Pure Recycled Carbon Fibres (rCF) for Applications of Composite MaterialsProperties of Second Life Carbon Fibre Reinforced PolymersSeparation of Hybrid Structures for the Reclaim of their Single ComponentsSurface Modification of Recycled Carbon Fibers by Use of Plasma TreatmentA Holistic Approach to Use Multi-Scale Fractions of Dry Carbon Fibre Production Waste in Filled Bulk Moulding Compounds (BMC)Application of Eco-Efficiency Analysis to Assess Three Different Recycling Technologies for Carbon Fiber Reinforced Plastics (CFRPs)Recycled Carbon Fibers in Complex Structural Parts - Organic Sheets Made of rCF Staple Fiber YarnsNon-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress MeasurementUltrasonic Fatigue of CFRP - Experimental Principle, Damage Analysis and Very High Cycle Fatigue PropertiesMechanism-Oriented Characterization of the Fatigue Behavior of Glass Fiber-Reinforced Polyurethane Based on Hysteresis and Temperature MeasurementsResearch of the Load Bearing Capacity of Shape-Optimized Metal Inserts Embedded in CFRP under Different Types of StressesAcoustic Emission Analysis during Bending Tests of Continuous and Discontinuous Fiber Reinforced Polymers to Be Used in Hybrid Sheet Molding CompoundsMeasurements of Mode I Interlaminar Properties of Carbon Fiber Reinforced Polymers Using Digital Image CorrelationDevelopment of a New Method for Residual Stress Analysis on Fiber Reinforced Plastics with Use of Digital Image CorrelationComputed Tomography Experiments on a Laboratory Multipurpose DiffractometerNumerical Simulation of Low Velocity Impact on Pin-Reinforced Foam Core Sandwich PanelSimulation of the Influence of Embedded Inserts on the RTM Filling Behavior Considering Local Fiber StructureFiber-Reinforced Plastics with Locally Adapted Stiffness for Bio-Inspired Hingeless, Deployable Architectural SystemsNumerical Investigations of Internal and Residual Stresses in Aluminium-Polymer Laminate Foils during Stretch FormingAn Integrated Virtual Tool Chain for the Simulation of the Manufacturing Process of a Composite Tidal BladeMaterial Characterization for Constituents of Fiber Reinforced Polymers by Experiments and Prediction of Effective Composite PropertiesNumerical Analysis on the Structural Behavior of a Non-Engaging CFRP Bellows Coupling for Propulsion TechnologyFE Analysis of the Influence of Fiber Orientation to Shearing and Wrinkling of Fiber Reinforced Thermoplastic PartsA Material Model for Prediction of Fatigue Damage and Degradation of CFRP MaterialsAn Approach for the Systematic Development of Progressive Light Weight Spring Element Concepts in Vehicle ConstructionsLight Weight Vehicle in Natural Fibre CompositeElectro-Mechanical Impedance Measurements as a Possible SHM Method for Sandwich Debonding DetectionHighly Elastic Strain Gauges Based on Shape Memory Alloys for Monitoring of Fibre Reinforced PlasticsSensor Integration in Castings Made of Aluminum - New Approaches for Direct Sensor Integration in Aluminum High Pressure Die CastingExperimental Investigations on Integrated Conductor Paths in Fiber-Reinforced Thermoplastic Composite StructuresIn-Process Monitoring of Joining Operations for Piezoceramic ElementsPolypropylene Based Piezo Ceramic Compounds for Micro Injection Molded Sensors
