Buch, Englisch, 1650 Seiten, 2-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 3200 g
Buch, Englisch, 1650 Seiten, 2-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 3200 g
ISBN: 978-3-03785-284-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conferenze Organizers
Chapter 1: Mechanic Manufacturing System and Automation
A Balance Ability Evaluation Method Based on Multidimension Passive Motion Excitement from 6-PSS Robot
A BP Decoding Algorithm Based on Nodes Residual for LDPC Codes and its Hardware Implementation
A Dual Fuzzy Neuro Controller Using Genetic Algorithm in Civil Aviation Intelligent Landing System
A Photovoltaic MPPT Strategy by Modified Fuzzy Control
A Recognition Algorithm for M-QAM Based on Amplitude Distribution
A Rotor Flux Observer Based on Nonlinear Quadrature Double Compensation
A Self-Calibration Algorithm for Concentric-UCA in the Presence of Mutual Coupling
ADAMS-Based Double Wishbone Suspension Motion Simulation and Optimization
ADAMS-Based Dynamic Simulation on Driving Axle Gear Meshing
ADAMS-Based Vibrating Subsoiler System Simulation Analysis
Adaptive Fuzzy Velocity-Based Routing for MANET
Adaptive Sliding Mode Controller Design for a Nonlinear Inverted Pendulum with Unknown Physical Parameters and its Experiment
Algorithm Research of Cutter Location Path for Five-Axis NC Machining Based on Equal-Parametric
Algorithm Study of Face Recognition on Improved 2DLDA
An Effective CS-BP Algorithm for 2-D DOA Estimation
An Improved DV-Hop Algorithm Based on Entropy for WSN
An Improved Method of Mathematical Model on Current Controlled Magnetic Levitation Ball System
An Intelligent Atrial Fibrillation Wireless Monitoring System Based on Nonlinear Bind Source Extraction Algorithm
Analysis and Sensitivity Evaluation of AE Signals and Vibration Signals for Fault Diagnosis of Low-Speed Rotating Machinery
Application of Arithmetic Operations Method in Single Pair-Pole Magnetic Encoder
Controllability of Discrete-Time Multi-Agent Systems with Leaders via Switching Topology
Controlling Chaos in Permanent Magnet Synchronous Motors by Cascade Adaptive Approach
Dam Deformation Monitoring Model Based on Neural Network with Ant Colony Optimization Algorithm
Delay Loop Current Control Methods of Shunt Active Power Filter
Delay-Dependent Non-Fragile Robust Guaranteed Cost Control for Switched Systems with Multiple Time Delays
Diagnosis for Vibration Fault of Steam Turbine Based on Modified Particle Swarm Optimization Support Vector Machine
Dynamic Location Allocation Optimization for PDP Panel Aging Stereoscopic Warehouse
Eye Statement Recognition for Driver Fatigue Detection Based on Gabor Wavelet and HMM
Face Detection Method Based on SSR Algorithm
Face Recognition Method Based on the Fuzzy Neural Network
High Accuracy Algorithm of Airborne Interferometric Synthetic Aperture Radar
High Altitude Airship Flight Control System Design and Simulation
Human ADL Signal Transmission System Optimization Method Using Bayesian Network Based on Wireless Sensor Network
IMC-PID Design with Time Delay Compensation for Multivariable System Based on V-Norm Decoupling
Improved EEMD Applied to Rotating Machinery Fault Diagnosis
Improved Wavelet Algorithm on Image Denoising Processing
Intelligent Built-in Test Fault Diagnosis and Prediction for Mechatronics Equipment
Intelligent Control Method of Ground to Air Missile Based on FCMAC
Intelligent Information System Design on Water Quality Monitoring, Water Bloom Prediction and Emergency Treatment Decision-Making
Intelligent Temperature Control of Ceramic Kiln Based on Data Fusion Technology
Median Morphological Filter Design Based on the PSO Algorithm
Method of Parallel Active Power Filter Compensation on 3-Phase 3-Wire Nonlinear Unbalanced Load System
Monitoring of Winding Deformation of Power Transformer by Using Nanosecond Pulses
New Estimations of Bounds for the Chu Chaotic System
NIR Detection of Alcohol Content Based on GA-PLS
Regulation of PID Controller Parameters Based on Ant Colony Optimization Algorithm in Bending Control System
Requirements of Level Arm Measurement Precision in Airborne Gravity
Research about Separation of the Surface Geometry Error for Large-Scale Holes Based on Wavelet Transform
Research on BIT Intelligence Maintenance Decision of Weapon Materiel
Research on Scene Matching Algorithm in the Vision-Aided Navigation System
Research on the Magnitude Time Series Prediction Based on Wavelet Neural Network
Research on the Marine Corrosion Model of Ferrous Metal Based on PLS and Grey Relational Analysis
Research on the Suppression of Input Power Disturbance for Single-Phase Photovoltaic Grid-Connected Inverter
Research on Ultra-Low-Bit-Rate Speech Coding Algorithm for Underwater Speech Communication
Reserch on Cutting Depth Effect in Cutting Process
Reusable Design of CAN Bus Controller IP Core
Review of the Tele-Calibration Technology
Robotic Waist Mechanism Driven by Dielectric Elastomer Actuators
Robust Adaptive Control Based on Specified Region Pole Assignment for Flexible Hypersonic Vehicle
Robust Fault Detection for Singular Stochastic Systems
Selection and Optimization in Vibration Isolation Structure of Marine Podded SSP Propulsion
Solutions of Single Point of Failure in Intrusion Detection System
Solving Collaborative Manufacturing Resources Optimization Deployment Problems Based on Improved DNA Genetic Algorithm
Solving Decision Problems with Mathematical Expectation
Spectral Data Modeling Based on Feature Extraction and Extreme Support Vector Regression
Spectral Properties of Broadband Pumped Optical Parametric Amplification
Spline Function Method Analysis Nature Frequency of Annular Foundations
Study on Data Acquisition and Measurement System of Occupant Restraint Test Bed
Study on Driving Characteristics of Discrete Rod by Different Initiation Styles
Study on Electromagnetic Exciting Force Characteristics and Electromagnetic Noise of Permanent Magnet DC Motor
Study on Four Parameters Estimation’s Methods of Time-Series Model in Modeling the Signal of a Quartz Flex Accelerometer
Study on Technology of Human Body Surface Reconstruction Based on Reverse Engineering
The Algorithm of VLBI Wide-Band Correlation and CE-2 Broadband Signal Processing
Type II Sleep Mode Operation for IEEE 802.16e Based WiMAX
Unsteady Characteristics over Dynamic Delta Wings
Variance Based Identification of Phase Transition in Duffing Oscillator for Weak Signal Detection
Chapter 2: Material Science and Technology in Manufacturing
A Damage-Coupled Time-Dependent Multi-Axial Fatigue Failure Model for Solder Alloy 63Sn-37Pb
Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading
Analysis of Copper Wires Residues in Fire Investigation
Comprehensive Testing Instrument on External Characteristics of Magnetically Controlled Shape Memory Alloy
Contact Analysis of Sealing Rings for Welding Bellows Mechanical Seal
Effect of Porous Structural Parameters on Ultrasonic Attenuation Capacity of Porous Al Alloy with High Specific Strength
Granular Structure Merging Algorithm Based on Category Theory
Influence of Pressure Amplitude on Formability in Pulsating Hydro-Bugling of AZ31B Magnesium Alloy Sheet
Mechanics Analysis of the Vibrating Subsoiler System Considering Material Acting Force
Preparation and Characterization of Molecular Imprinted Polymers of Tetracycline Antibiotics by Mixed-Templates
Primary Modeling and Survey of 4H-SiC Based Metal-Semiconductor-Metal Ultraviolet Sensor with Novel Electrode Structure
Research on Molten Iron Vertical Flow Rate and Level Based on Dynamic Infrared Radiation and Time Intervals
Research on Nonlinear Stiffness Characteristics of Hydro-Pneumatic Spring
Research on Performance of Sasobit Warm Mix Asphalt and Influence of Aging Using DSR
Research on the High Temperature Properties of Sasobit Warm Mix Asphalt Mortar
Surface Roughness Measuring System Design for Cutting Workpiece Based on Machine Vision Technology
Chapter 3: Sensor, Test and Signal Processing
A Cellular Intrusion Detection Framework for Packet Dropping Attacks in Wireless Sensor Networks
A Detection Circuit to Faint Signal for Difference Absorption Gas Sensor
A Frequency Tracking Method Based on Improved Adaptive Notch Filter for Coriolis Mass Flowmeter
A Natural Image Compression Approach Based on ICA and Visual Saliency Detection
A New Method Based on HMMs and K-Means Algorithms for Noise-Robust Voice Activity Detector
A New Referenced Signal Detection Method Adaptive to Multi-Objective Control of Active Power Filter
A Novel Corner Detection Based on Improved SUSAN Model
A Novel Method for Measuring the Open-Circuit Loss and Short–Circuit Loss of Distribution Transformers Online
A Novel Precision Strain Measuring Circuit with Double-Channel Method
A Novel Skin Image Detection Method Based on GMM and GAs
A Side-Coupled Optical-Fiber Liquid Level Sensor
A Simplified Cascaded Modular Structure for the Implementation of MVDR Detector
A Skew Detection Algorithm for PDF417 Based on Feature Point
An Adaptive Wavelet Shrinkage and its Application in Image De-Noising
An Automatic Singing Evaluation System
An Autonomous Predictive Centroiding Algorithm for Star Sensor
An Energy-Balanced Clustering Routing Protocol for Wireless Sensor Networks
An Image Hided-Data Detection Method Combining Markov Chain and Support Vector Machines
An Imaging Processing Method for Linear Array ISAR Based on Image Entropy
Application of Bidimensional Empirical Mode Decomposition to Medical Liquid Opacity Detection
Applying Ad Hoc Network on Unknown Environment Detection
Blind Separability of Reverberation and Target Echo Based on Spatial Correlation
Calibration of Pressure Sensor in Automobiles Based on ZMD Chip
Comparison of Single-Layer and Multi-Layer Laser Scanners for Measuring Characteristic
Comparison of Synchronizing Speed Limitations of Networked Lorenz Oscillators when Coupling Strength Tends to Infinity
Component Spectrum Recognition for Mixed Gas Based on SVM
Design and Application of a Measuring and Diagnosing System Based on Networked Virtual Instrument
Design and Fabrication of an Electromagnetic Stress Sensor
Development of Fault Diagnosis System for Telemetry Equipment Based on the Virtual Instrument Technology
Development of Ultrasonic Automatic Testing System for Flaws of Rotary Parts
Difference Absorption Optical Fiber Methane Gas Sensor Based on FBG
Effect of Image Motion and Vibration on Image Quality of TDICCD Camera
Fusion of Infrared and Visible Image Based on Target Regions for Environment Perception
Identification the Low-Frequency Oscillation Stakeout of Power System by Wide-Area Measurement System
Image Displacement Detection under Low Illumination Using Joint Transform Correlator with Wavelet Denoising
Inter-Pulse Spectroscopy Based on Room-Temperature Pulsed Quantum-Cascade Laser for N2O Detection
Measurement and Analysis of the Circuit Delay of CEI System
Measurement of Tracking Accuracy of Antenna Using Precise Geostationary Satellite Orbit
Measurements and Predictions of Steady-State and Transient Temperature Distributions of a Gasoline Engine
Multi-Node Spectrum Sensing Based on a Novel Dempster-Shafer Theory
Multi-Robot Control System Based on Wireless Network
Multi-User Detection of DS-CDMA Based on Improved-FastICA
An Application Study to the Ciphers Weighed in Faithful Transmission
Neighbor-Based Adaptive Listening and Sleeping Scheme for Wireless Mesh Sensor Networks
Node Deployment of Wireless Sensor Networks in Long Narrow Area
On-Line Oil Monitoring Sensors Fusion for Aircraft Health Management
Online Temperature Detecting System in Hot Machining Process
Portable Fault Testing Device of Electronic Instrument Based on PC 104 Bus
Practical Technologies Research of Line Structured Light Three-Dimensional Profile Measurement at Low-Cost
PZT Sensors and their Application in Structural Health Monitoring
Reducing False Negatives in Intelligent Intrusion Detection Decision Response System
Research of Active Detection Technology Using Vector Array on Small Platform
Research of DC Current Measurement Technology Based on Optical Fiber Thermometry
Research on FBG Spectral Optimization with Particle Swarm Optimization Algorithm
Research on High Precision and Non-Contact Measuring System for Geometric Parameter of the Irregular Shape
Research on Note Location of Wireless Sensor Network in Logistics Transportation
Research on Operational Model of New-Generation GPS Based on Dynamic Description Logic
Research on Temperature Monitoring System for Electrical Equipment Based on Wireless Sensor Networks
The Analysis of Miss Distance Sensitivity to Target Maneuvers for the Terminal Guidance System
The Application of Multiple Attribute Decision Making on Radio Signal Searching
The Detection of Soil Parameters by Portable near Infrared Spectrometer
The Route Algorithm of Post-Disaster Road Monitoring System
The Safety Monitoring of Colliery Equipments Based on Data Mining Technology
The Study of Low-Power Consumption Heat Meter Based on MSP430
The Study of the Dual-Wavelength Fiber-Optic Temperature Sensor
Video Signal Capture and Processing Card Based on H.264 Hardware Encoder
Voice Activity Detection with Decision Trees in Noisy Environments
Voltage Dip Analyzing Method for Multiple Faults Condition in Complex Power Network
Chapter 4: Fault Diagnose and Electronmechanical Control
A Control Method of Hypersonic Vehicle Based on the Structured Singular Value Theory
A Control System of Binocular Eyes Based on DSP TMS320F2812
A Cooperative Co-Evolutionary Controller for AC Induction Motor
A Fluid-Driven Path Controllable Drilling Device with 3-DOF Hydraulic Steering System
A Hybrid Intelligent Excitation Control for Ship Power Station
A SPWM Control Method for Dual Buck Half Bridge Inverter Based on the Direction of Inductor Current
A Study of MRife Algorithm and CSB Algorithm on Frequency Online Estimation
A Study of Processing of the Leakage Signal for Single Antenna LFMCW Radar Altimeter
A Study on an Effective Motion Tracking Algorithm
Analysis on Application of HCCI Technology for Hybrid Electric Vehicles
Application of Disturbance Rejecting Fuzzy Controller in Electric Arc Furnace
Application of Fuzzy PID for the Ventilation and Air Conditioning System of Subway Station
Based on Fuzzy PID Control’s Research of Control of Concentration of Sub-Nanometer Wood Flour
Direct Torque Control of Permanent Magnet Synchronous Motor Based on Fast Terminal Sliding Mode
Distributed High-Precision Field Testing System of Construction Machinery Based on CAN Bus
Driving Belt Conveyor Based on Long-Term Transmission Inverter
Dual Mode Braking System Design of a HEV
Effect of Yaw Angle Error in an Aircraft’s Aerial Triangulation
Electric Vehicle Forecasting for China from 2011 to 2050 Based on Scenario Analysis
Engine Failure Data Analysis Method Based on Weibull Distribution Model
Error Analysis of Mechanism with Clearances and Fuzzy Control
Failure Modes and Countermeasures of Working Device of a Heavy Vehicle
Fault Diagnosis of CNC Machine Using Hybrid Neural Network
Fault Diagnosis of Power Quality
Flipping PTS-OFDM System without Side Information
FPGA-Based Design of Resource-Efficient Digital down Converter
Fuzzy Control System of Titanium Dioxide Hydrolysis Process
Fuzzy Depth Control of Small Cylindrical Object Navigating near Free-Surface
Fuzzy Immune PID Control for 6-DOF Parallel Platform
H8 Control of Flexible Joint Robot via T-S Fuzzy Model
Hardware-in-Loop Electronic Throttle System Based on Simulink
Local Stiffness and Dexterity Analysis of a 3-SPS-S Orientation Fine-Tuning Manipulator for Segment Assembly Robots in Shield Tunneling Machines
Localization Algorithm Based on DV-HOP for Wireless Sensor Network
Nonlinear Analysis of Transmission Tower Structure by Three FEM Models
Nonlinear Behaviors of Giant Magnetostrictive High Power Ultrasonic Transducer
Nonlinear Resonant Generator for Harvesting Energy from Human Wrist Vertical Shaking
On-Line Fault Intelligent Monitoring Diagnosis System of Blower
Partial Discharge Pattern Recognition of Power Transformer by Using Information Fusion
Penetration Acceleration Signal Overload Rigid Separation Base on Local Mean Decomposition
Petroleum Instrument Fault Analysis Based on the Data Mining Fault Dictionary Method
Pinning Synchronization of Complex Dynamical Networks with Time Delay
PLC Control System Design for Automated Storage and Retrieval System
Presentation, Implementation and Application of a High Speed Hamming Distance Generator
Real-Time Database System Implementation of Railway Signal Power Source Remote Monitoring
Real-Time Simulation Study for a Series Hybrid Electric Vehicle
Research and Implement of Measuring the Errors of Transformers with Actual-Burden Using Programmable Digital Synthesizing Three-Phase Power Supply
Research for CAN Node Fault Rapid Detection Based on OSEK Network Management
Research of De-Couple Control System for near Space Vehicle with High Maneuver and Couple
Research of Dynamic Compensation for Hysteresis Nonlinear
Research of Flow and Pressure Pulsation in Aircraft Deicing System
Selection of Optimal Measure Project for Automatic Test System
Self-Optimized Nonlinear PID Controller for Networked Chaotic Systems to Synchronize onto Arbitrary Orbit
Semi-Physical Acoustic Vision Simulation System of Autonomous Underwater Vehicle
Shaping Law and Motion Design in NC-ECM under Effect of Twiste Angle
Significance Tests on Design Factors Affecting the Frequency Performance of Spherical Cymbal Transducer
Storage Test Techniques and Wireless Transmission Based on Embedded System
Study on a Control Method Used in the Semi-Active Suspension
Study on Control Parameters in the Acceleration of Axial Flow Blood Pump
Study on Control Technique of Dynamic Hysteresis for Active Inverter
Study on Load Characteristics of a Mini Permanent Magnet Synchronous Generator for Wind Power
Study on Operation Control Strategy of Single Piston Hydraulic Free-Piston Diesel Engine
Study on Overhead Crane Anti-Swing System with Self-Adjustable Fuzzy Control
Study on Quantitative Detection of Pesticide Residue Based on Spectroscopy Technology of Differential Absorption
Study on Soft Sensor Modeling and Optimization Control of Biological Fluidized Bed Swage Disposal
Superheated Steam Temperature Control Based on Improved Recurrent Neural Network and Simplified PSO Algorithm
Switched Control Strategy for Networked System with Multi-Rate Input Sampling
Target Fusion Algorithm for Remote Sensing Image Recognition
Target Tracking Approximation Algorithms Based on Particle Filters and near-Linear Curve Simplified Optimization in WSN
Temporal Feature Characterization via Dynamic Hidden Markov Tree
The Application Research on Image Fusion Technology in Tires Sorting Control
The Construction and the Management of Electric Vehicle Charging Network
The Construction of Network Virtual Laboratory for Measurement and Control Technology of Panzhihua University
The Fault Diagnosis of Automotive Airbag Assembly Process Based on Self-Organizing Feature Mapping Network SOM
The FPGA Implementation of NLMS Adaptive Interference Cancellation Algorithm
Vehicle-Classification Based on Edge Extraction and Background Difference
Vibration-Based Structural Damage Identification Using Grey Forecasting Model
Chapter 5: Model and Optimization and Simulation
Application of Knowledge Based Engineering in Building Mould Standard Components
Application of Optimal Fitting in the Static Thrust Line Measurement of Solid Rocket Motor
Braking Distance Estimation by Simulation
Brief Introduction of Brake Line Pressure and Brake Torque Transmission Model
Development and Validation of Offset Deformable Barrier Model with Beam Element
Development of Configuration Software Interface for Engineering Vehicle Supervisory Control and Management
Heat and Mass Transfer Finite Element Simulation of Clay Ceramic Prototype in High-Temperature Drying
Kinematic and Modal Simulation Analysis of the Bionic Eye Based on Spherical Parallel Mechanism (SPM)
Knowledge-Based Classification Method for Urban Area Objects Feature Extraction Based on LIDAR Points
Modal Sensitivity Analysis for Series Harmonic Resonance in Power System
Modeling and Simulation of Diesel Propulsion System in Maneuvering Navigation Condition
Modeling, Analysis and Optimization of Three Degree of Freedom Automobile Handling and Stabilities Model
Modeling and Simulation of a Novel Hydraulic Disc Brake for Truck-Mounted Drilling Rig
Modified Projective Synchronization of Chaotic Systems with Unknown Parameters
Optimization Design of Excitation Strategy on Vibrating Wire Sensor
Optimization for Dynamic Performance of the Fiber Optical Voltage Transformers
Optimization of Vehicle Tailpipe Hook Stiffness
Research on Extracting Cyclostionary Statistics of Amplitude-Modulated Signals Based on Cumulant
Research on Mathematic Model and Measuring Method of Moving Beam Attitude in Large Forging Hydraulic Press
Research on the Energy Saving Potential of Official Cars in China
Simulation and Analysis on Vehicle Frontal Crash Based on Virtual Proving Ground
Simulation and Research on Maximum Efficiency of Permanent Magnet Synchronous Motor Driving System
Simulation and Control System of Camera Robot
Study on the Date Generation Process of Chinese Thermal Power
Study on the Mathematical Simulation of Galvanic Coupling IBC with Different Signal Transmission Paths
The Dynamics Analysis of Full Mounted Converter Vessel Tilting Mechaism
The End-Point Ingredient Prediction of Low Carbon Ferrochrome Smelt Based on the Working Condition
The Model and Algorithm of Doppler Radar Speed Measurement System
The Model and Simulation of Hydraulic Non-Sinusoidal Vibration System on Billet Caster Crystallizer
The Optimal Attitude Controller Design and Simulation of Three-Axis Dual Rotor Helicopter
The Principal Component Analysis of Signal Characteristic Parameters
The Simulation Analysis of Structure Type Effect on Cutting Process
The Simulation Analysis of Tool Orthogonal Rakes Affecting Metal Cutting
Track Initiation Based on Extended Trellis and Randomized Hough Transform
Wood Board Defects Sorting Based on Method of Possibilistic C-Means Improved Support Vector Data Description
Study of Vehicle Engine Transient Emissions
Chapter 6: Computer Aid Design
Analysis of OCR Design and Implementation for GUI Modeling
Development the Cam Design System Based on VC++
Finite Element Analysis of Impact Plunger and Drill Rod and Optimization Design for Drill Rod of YC70 Hydraulic Impactor
Finite Element Analysis of the Screen Box of the Combined Vibrating Screen Based on ANSYS
Information Complexity of Monte Carlo Integration in Multivariate Functions with Mixed Smothness
Research on an Improved Self-Correcting Location Algorithm for Wireless Local Region
Software Design for Centralized Monitor of Chang’E-1 Operational Simulator
Software Design of Networked Virtual Instrument System
Chapter 7: Design and Practice
Automobile Panel Reverse Engineering Design Based on NURBS Surface Reconstruction Technique
Automobile Stamping Parts Quality Inspection and Analysis Based on ‘Geomagic Qualify’ Software
Based on FE Method to Research Resistant Rutting Ability of Pavement Structure in Heilongjiang Province
Colorful Limit Fractal Patterns with Evolving Planar Symmetry from Dynamics
Comparison of Detrending Methods in Frequency Domain Analysis of R-R Interval Series
Design and Implementation of a Simulation System for Armored Communication Countermeasure Training
Design and Implementation of a Voltage Booster Circuit for High-Pressure Injector Drives in GDI Engines
Design and Implementation of H.264/SVC Decoder Forecast Module on ASIC
Design and Precision Analysis of Muzzle Angle Measurement System
Design and Realization of High-Speed and Real-Time Signal Processing System Based on FPGA
Design and Simulation of High Altitude Air-Launched Automatic Underwater Vehicles
Design of H8 Robust Control for Shunt Active Power Filter Based on the Mixed Sensitivity Method
Design of a Sliding Mode Control with a Nonlinear Continuous Time-Varying Switching Surface
Design of Elastic Cell in Pressure Sensor
Design of Monitoring System for Frequency Converter Sets Based on PCI Bus
Design of the Environment Multi-Parameters Recorder Based on MSP430 SCM
Design of the Transpire Freight Impact Test System Based on ASTM D6537
Design on Piezoelectric Converter for Electronic Safety System
Dynamic Optimization Design of Engine Crankshaft
Dynamic Properties on Double Driving Articulated in-Pipe Robot Inspecting System
EEG Signal Classification by Global Field Power
Error Analysis for Correlation Algorithm Based Servo Valve Frequency Characteristic Measurement
Error Analysis of Triangular Laser Measurement System
Error Comparison of Different Acoustic Infinite Element
Experiment Study and Design of Measurement System of the Total Electrical Field on the Ground Level under HVDC Transmission Lines
Experimental Research of Solar Wall in Building Application
Experimental Research on a Certain Light Truck Cab Suspension System Effect on Ride Comfort
Study on Balance Scheduling Based on the Gasholder Level Prediction for Blast Furnace Gas System in Steel Industry
Sustainability-Oriented Product Modular Design Using Design Structure Matrix (DSM) Method
The Design of Constant-Flow Bump Control System Based on BP Neural Network
The Design of Electric Power Optical Cable Circuit Automatic Monitoring System Based on PC Computer
The Research and Design of Portable Leaf Disease Spots Image Acquisition System
The Research of Companding Transform for Peak-to-Average Power Ratio Reduction of OFDM Signals
The Research of Spectral-Line Monitoring of Transformer Vibration
The Research of Static Friction Coefficient Measure Technology and Calibration Method for Traffic Engineering
The Research of Subsea Electronic Module for Subsea BOP
The Design and Implementation of a Communication Mechanism of Centralized Body Control Module
