Buch, Englisch, 680 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1300 g
ISBN: 978-3-03785-517-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff
- Medizin | Veterinärmedizin Medizin | Public Health | Pharmazie | Zahnmedizin Medizin, Gesundheitswesen Medizintechnik, Biomedizintechnik, Medizinische Werkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Medizintechnik, Biomedizintechnik
Weitere Infos & Material
Preface, Committees and Bioceramics Symposia
I. Advanced Calcium Phosphate Ceramics
Ab Initio Simulations on the Carbonated Apatite Structure
Orientation of Hydroxyapatite Rods Formed by Hydrothermal Treatment of Calcium Carbonate
Observation of Transformation Behavior of Octacalcium Phosphate to Hydroxyapatite
Fabrication of ßTCP Foam Using aTCP Foam as a Precursor by Heat Treatment
Smart Calcium Phosphate Bioceramic Scaffold for Bone Tissue Engineering
Formation of Oriented Hydroxyapatite Crystals in a Hydrogel
Influence of Niobium Oxide on the Mechanical Properties of Hydroxyapatite
Apatite-Based Microcarriers for Bone Tissue Engineering
Basic Properties of Starfish Derived Calcium Carbonate and its Phase Transformation to Carbonate Apatite
Behavior of Human Blood Adsorption to Biomimetic Functionally Graded Hydroxyapatite
Characteristics of Surface Behavior and Osteoinductivity of Biomimetic Ceramic Scaffold
Effect of Anions on Morphology Control of Brushite Particles
Morphological Control of Hydroxyapatite Particles by Homogeneous Precipitation Method in the Co-Presence of Various Carboxylic Acids
The Size Control of Hydroxyapatite Particles during Spray Pyrolysis
Heterogeneous Structure of Hydroxyapatite and In Vitro Biodegradability
Investigation of Multilayered Protein Adsorption on Carbonate Apatite with a QCM Technique
Fabrication of Spherical Carbonate Apatite Using Calcium Sulfate as a Precursor by W/O Emulsion Method
Enhanced Effects of New Bone Formation by an Electrically Polarized Hydroxyapatite Microgranule/Platelet-Rich Plasma Composite Gel
Synthesis and Characterisation of Strontium and Magnesium Co-Substituted Biphasic Calcium Phosphates
Simplification of the Synthesis Method for Silicon-Substituted Hydroxyapatite: A Raman Spectroscopy Study
Synthesis and Characterization of Cx-Siy-HA for Bone Tissue Engineering Application
Characterization and In Vitro Evaluation of Silicate-Containing Tricalcium Phosphate Prepared through Wet Chemical Process
Fabrications of Boron-Containing Apatite Ceramics via Ultrasonic Spray-Pyrolysis Route and their Surface Properties
Synthesis of Mg2+ Incorporated Hydroxyapatite by Ion Implantation
Synthesis of Zinc-Containing Amorphous Calcium Phosphate
Computational Studies of Magnesium and Strontium Substitution in Hydroxyapatite
II. Porous Materials
ß-TCP Scaffolds with an Interconnected and Aligned Porosity Fabricated via Ice-Templating
The Effect of Sintering Temperature on the Microstructural and Mechanical Characteristics of Hydroxyapatite Macroporous Scaffolds Prepared via Freeze-Casting
3-D Printed Bioactive Bone Replacement Scaffolds of Alkaline Substituted Ortho-Phosphates Containing Meta- and Di-Phosphates
Fabrication of Three Different Types of Porous Carbonate-Substituted Apatite Ceramics for Artificial Bone
Evaluating Initial Content of the Slurry and Cooling Rate on the Microstructural and Mechanical Characteristics of Freeze Casted Hydroxyapatite Macroporous Scaffolds
Fabrication of Calcite Foam by Inverse Ceramic Foam Method
III. Cements
Characterization of a/ß-TCP Based Injectable Calcium Phosphate Cement as a Potential Bone Substitute
Adsorption Behavior of Sodium Inositol Hexaphosphate on the Surface of Hydroxyapatite
Comparative Study on Bioresorbability of Chelate-Setting Cements with Various Calcium-Phosphate Phase Using Rabbit Model
In Vitro Biological Evaluation of Anti-Tumor Effect of the Chelate-Setting Hydroxyapatite Cement
Studies on the Anti-Tumor Action of Chelate-Setting Apatite Cements
In Vitro Evaluation of Chelate-Setting Cements Fabricated from Silicon-Containing Apatite Powder Using Osteoblastic Cells
Evaluation of the Anti-Bacterial Activity of a Novel Chelate-Setting Apatite Cement Containing Lactoferrin
Basic Properties of Carbonate Apatite Cement Consisting of Vaterite and Dicalcium Phosphate Anhydrous
Preparation of Carbonate Apatite Cement Based on a-TCP
Improvement in Handling Property of aTCP Cement
IV. Coatings
Controlled Self-Coating of Implant Surfaces with Autologous Molecules
Hydroxyapatite and YSZ Reinforced Hydroxyapatite Coatings by Gas Tunnel Type Plasma Spraying
Laser-Assisted Biomimetic Process for Calcium Phosphate Coating on a Hydroxyapatite Ceramic
A Novel Approach to Prepare Hydroxyapatite-Coated Biodegradable Polymer Microspheres Loaded with Magnetic Fe3O4 via Nanoparticle-Stabilized Emulsions
Evaluation of Hydroxyapatite Film by Powder Jet Deposition after Artificial Aging
Characteristics and Bioactivity of CaP Porous Coating with Bio-Inspired Dopamine
Formation of Hydroxyapatite on Nickel-Free High-Nitrogen Stainless Steel by Chemical Solution Deposition Method in Neutral/Alkaline Solution
Electrolytic Deposition of Calcium Phosphates Films on Nitinol Stents
Effects of Hydrothermal Treatment on Properties of Titanium Nitride Coating for Dental Implants
Protectivity and Adhesive Strength of Zinclipscombite Coating on 316L Stainless Steel
Bio-Fabrication of Nacre on Conventional Implant Materials
V. In Vivo Study and Clinical Application
Clinical Studies of Anterior Cervical Fusion with PEEK Cages: Comparing Iliac Graft and a Macroporous Biphasic Calcium Phosphate
Bioactive Glass Cloth that Promotes New Bone Formation
Autologous Bone vs. Allograft Bone in Ridge Augmentation
A Novel Unidirectional Porous Hydroxyapatite Cylinder Implanted in the Dorsal Muscles of Dogs Promotes Fibrous Tissue Vascularization and Invasion
Comparison of Polyethylene Wear between Highly Crosslinked and Annealed UHMWPE and Conventional UHMWPE against Ceramic Heads in Total Hip Arthroplasty
Bone Grafting Putty – Animal Experiments and Clinical Applications
In Vivo Comparative Study of Two Injectable/Moldable Calcium Phosphate Bioceramics
Cortical Bone Tissue Response of Injectable Octacalcium Phosphate-Hyaluronic Acid Complexes
Bone Regenerative Properties of Injectable Calcium Phosphate/PLGA Cement in an Alveolar Bone Defect
Osteoconductivity of New Sodium Calcium Phosphate Pastes
Histological Analysis of Bone Bonding and Ingrowth into Connected Porous Hydroxyapatite Spacers in Spinal Surgery
Radiological and Histological Evaluation of Regenos® which Implanted in Human Radial Fracture: A Clinical Case Report
The Clinical Application of the LEBRA-PXR in Imaging Diagnosis
Assessment of the Elastic Properties of Human Femoral Bone with Artificial Hip Joint by Ultrasound Transmission
Preclinical and Clinical Cases of New Absorbable Composite Interference Screws in Osteoarticular Surgery
Lectinhistochemistry Evaluation of Rabbits Tibia Implanted with Macroporous Biphasic Ceramic Implants
Comparison between the Lateral and Medial Femur in Low-Mineral-Diet-Fed Ovariectomized Rats Using Raman Spectral Analysis
Changes in Bone Quality of the Femoral Diaphysis Induced by High-Level Fluorine Ingestion in Ovariectomized Rats
Osteoinductive Coating on PEEK Surfaces by Using Nanocrystalline Biomaterial and In Vivo Test
VI. Cell Studies and Cell-Material Interactions
Physico-Chemical Characterization and In Vitro Biological Evaluation of Pure SiHA for Bone Tissue Engineering Application
Surface Electric Fields of Apatite Electret Promote Osteoblastic Responses
Nerve Regeneration by Using of Chitosan-Silicate Hybrid Porous Membranes
MC3T3-E1 Cell Response to Hydroxyapatite and Alpha-Type Alumina Adsorbed with Bovine Serum Albumin
Analysis of Gene Expression and Morphology of P19 Cells Cultured in an Apatite-Fiber Scaffold
Influence of Micro-/Nano-Particles on Osteoblast-Like Cells: A Static and Time Lapse Observation
Murine Macrophage RAW264.7 Cells Response for the Carbon Nanotubes Immobilized on Substrate
Study of the C60 Fullerene on Differentiation of Mouse Embryonic Stem Cells
In Vitro Evaluation of Silicon-Containing Apatite Fiber Scaffolds for Bone Tissue Engineering
Reconstruction of Tissue-Engineered Bone Using an Apatite-Fiber Scaffold, Rat Bone Marrow Cells and Radial-Flow Bioreactor: Optimization of Flow Rate in Circulating Medium
Three-Dimensional Culture of Vascular Endothelial Cells Using Vascular Endothelial Growth Factor-Loaded Apatite-Fiber Scaffolds with Enhanced Mechanical Property
Expression of Integrin Alpha-3 and Beta-4 Subunits on the Process of Peri-Implant Epithelium Formation
VII. Composites
Properties of Gelatin/Carbonate Apatite Composite Compared to Bovine Bone
Comparison of PLGA Reinforcement Method for Carbonate Apatite Foam
Processing and Characterization of a Composite of Hyaluronic Acid (HA) and Microspheres Biphasic Calcium Phosphate (BCP) for Dermal Repair
Fabrication of Composites from Apatite and Chemically Synthesized Collagen
Surface Design and Water Vapor-Adsorption Characteristics of Biomimetic Composite Materials Derived from Salmon Resource
Effects of Heat Treatment on Apatite Formation of CaO-SiO2-PEEK Composites
Composite Bioceramics/Polymer Electrospun Scaffolds for Regenerative Medicine
Development and Characterization of Poly(e-caprolactone) Reinforced Porous Hydroxyapatite for Bone Tissue Engineering
Effect of Organic Polymer Addition on the Microstructure of Magnetite-Polymer Hybrid
VIII. Drug Delivery Carriers
Therapeutic Effect of Lipophilic and/or Hydrophilic Zinc Related Compound Injections on Alveolar Bone Mass in Zinc-Deficient Osteoporosis Rats
The Controlled Release of Simvastatin from Biomimetic Macrospheres
Coprecipitation of DNA and Calcium Phosphate Using an Infusion Fluid Mixture
Novel Apatite-Pathogen-Associated Molecular Patterns Adjuvants for Cancer Immune Therapy
Adsorption of Alendronate onto Biomimetic Apatite Nanocrystals to Develop Drug Carrier Coating for Bone Implants
FGF-2-Zinc-Apatite Composite Layers on External Fixation Rod for Promoting Cell Activity
Preparation of Calcium Phosphate – Peptide Composites with Highly pH-Sensitive Drug Release
Calcium Phosphate Coated Hydroxyapatite/Collagen Nanocomposite Membrane for Surface-Mediated Gene Transfer
Effect of Structure and Composition on Ibuprofen Drug Delivery by Calcium Phosphate Nanocarriers
IX. Dental Materials
Surface Properties of Dental Zirconia after Clinical Grinding and Polishing
Factors Affecting on the Bond Strength of Dental Zirconia to Veneering Porcelains
Rare Earth Oxide Containing Filler for Dental Composite Resin
Phosphorylated Pullulan Bioadhesive for Regeneration and Reconstruction of Bone and Tooth
Adhesive Strength between Flexible Hydroxyapatite Sheet and Tooth Enamel
Effects of Ammonium Hexafluorosilicate Concentration on Crystallinity of Hydroxyapatite Powder and Enamel
Formation of Calcium Phosphate/Titanium Oxide/Titanium/ Plastic Composite Implant
Reaction of Dental Zirconia with Phosphate-Bonded Investments for Heat Pressing Technique
Visible Light-Induced Crosslinkable Gelatin for Direct Pulp Capping
X. Metals
Bioactive Ti Metal with Ca-Enriched Surface Layer Able to Release Zn Ion
Fabrication of Bioactive Apatite Nuclei-Precipitated Titanium Alloys by Using Sandblasting
Influence of Titanium Surface Topography on Peri-Implant Soft Tissue Integration
Enhancement of Calcium Phosphate Formation on Zirconium by Combination of Simple Electrochemical Treatments
Effect of Autoclave and Hot Water Treatment on Surface Structure and Apatite-Forming Ability of NaOH- and Heat-Treated Titanium Metals in Simulated Body Fluid
Titanium and Ti-13Nb-13Zr Alloy Porous Implants Obtained by Space-Holder Technique with Addition of Albumin
Hydrothermal Modification of Products Fabricated by Electron Beam Melting
Corrosion Resistance of Ti-29Nb-13Ta-4.6Zr Alloy in a Fluoride-Containing Solution
XI. Zirconia and Alumina Ceramics
The Long-Time Low-Temperature Degradation (“LTD”) Kinetics in 3Y-TZP Bioceramics
Titania versus Ceria Alumina/Zirconia Composites: Structural Aspects and Biological Tolerance
Effect of Polarization Treatment Time on Inhibition of Low Temperature Degradation in Y-Doped ZrO2
XII. Nano Materials
Laser Vaporization of Magnetic FexOy and FexOy-SiO2 Nanoparticles for Biomedical Applications
Nano-Bioceramic Production via Mechano-Chemical Conversion (Ultrasonication)
Adsorption Behavior of Albumin and other Proteins on Carbon Nanotubes Studied by Chromatography
The Effects of the Coating of Anodized Titanium with Multi-Walled Carbon Nanotubes on Bone Formation
Biocompatibility and Biodistribution of Several Nano-Sized Ceramics Particles
Cytotoxicity and Cancer Detection Ability of the Luminescent Nanoporous Silica Spheres Immobilized with Folic Acid Derivative
XIII. Sol-Gel Synthesis and other Materials
Sol-Gel Preparation of HAp-Coated Silica Macrospheres from Water Glass and their Protein Adsorption
Inhibitory Effects of Doped Aluminum and Silicon on HAp-Forming Ability of Titania in Simulated Body Fluid
Time-Dependent Protein Adsorptive Behavior on/in Mesoporous Silica Materials
The VSC Adsorption on Hydrotalcite through Topochemical Reactions
A New Role for Marine Skeletal Proteins in Regenerative Orthopaedics
