Sonstiges, Englisch, Band Volume 1112, 592 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1112, 592 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-273-0
Verlag: Trans Tech Publications
The 124 papers are grouped as follows:
Chapter 1: Optics, Magnetic and Strongly Correlated Electron Materials;
Chapter 2: Nanostructured Materials and Nanotechnologies;
Chapter 3: Catalysts, Adsorbents and Related Materials: Fundamentals and Applications;
Chapter 4: Photovoltaics, Batteries and Fuel Cells: Emerging Materials and Devices;
Chapter 5: Surfaces, Coatings and Hardening of Materials for Industrial Application;
Chapter 6: Polymers and Composites: Synthesis and Properties;
Chapter 7: Biomaterials and Biomedical Engineering;
Chapter 8: Mining, Metallurgy and Chemical Engineering
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Optical Band Transitions and Excitonic States in ZnO:Cu FilmsOptical Properties of Erbium Doped Borotellurite Glass SystemCharacterization of Mg0.8Zn0.2TiO3 Prepared via Liquid Phase SinteringSynthesis and Electrical Characterization of 0.8(K,Na)NbO3-0.2(Ba,Ca)(Zr,Ti)O3 Lead-Free CeramicsCrystal Structure and Magnetic Properties of Zn Doped Barium M-HexaferriteRaman Spectra of Multiferroics TbMnO3Structure and Magnetic Properties of Spark Plasma Sintered NdFeBThe Influence of Glucose Concentration to Resonant Wavelength Shift of Polymer-Based Microring ResonatorsVerification of Theoretical Model for Tunneling Currents in Al/SiO2/p-Si MOS Capacitors with Nanometer-Thick OxidesTheoretical Investigation on Electronic Properties of ZnO Crystals Using DFT-Based Calculation MethodA Simple Dissolved Metals Mixing Route to Prepare Nanostructured Mg0.8Zn0.2TiO3 Solid SolutionCharacterizations of Carbon Nanospheres Synthesized Using Activated Carbons and Palm OilStress ? Strain Analysis on ZnO Nanostructures Synthesized via Wet Chemistry MethodSynthesis and Characterization of Zero-Valent Iron NanoparticlesSynthesis of Various ZnO Nanotree Morphologies through PEG-Assisted Co-Precipitation Method
Thevetia p
eruviana: A Wild Natural Resource for the Green Synthesis of Gold NanoparticlesSynthesis of Antibacterial Nanofibrous Membrane Based on Polyacrylonitrile (PAN)/Chitosan by Electrospinning Technique for Water Purification ApplicationElectron Tunneling Current in an n-p-n Bipolar Transistor Based on Armchair Graphene Nanoribbon by Using Airy-Wavefunction ApproachElectrical Properties of Carbon-Based Thin Film on Al2O3/SiFormation of Porous Anodic Alumina from Impure Aluminum Foil in Inorganic AcidsCovalent Functionalization of Graphene Flakes with Well-Defined Azido-Terminated Poly(?-caprolactone) and Poly(2-oxazoline)Graphene-Based Flexible Circuit on Cotton Fabric Using Wax Patterning MethodModeling of Electron Tunneling Current in a p-n Junction Based on Strained Armchair Graphene Nanoribbons with Extended Tight Binding and Transfer Matrix MethodStudy of Carbon Thin Film Deposition on Various Buffer Layer as Characterized by X-Ray Diffraction and Raman SpectroscopyTopographic and Electronic Properties of 3,4,9,10-Perylene Tetra Carboxylic Dianhydride (PTCDA) on Indium Tin Oxide (ITO) SurfaceThe Methanol Response Sensing Properties Using MWCNT-ZnO CompositeLaser Ablation of Nanoparticles: A Molecular Dynamics StudyOptical Properties and Interband Transitions of ZnO and Cu-Doped ZnO Films Revealed by Spectroscopic Ellipsometry MeasurementSimulation of Dirac Electron Tunneling Current in Armchair Graphene Nanoribbon Tunnel Field-Effect Transistors Using a Transfer Matrix MethodExternal and Internal Influences in Silicene MonolayerDevelopment of Emulsion Gels and Macroporous Hydrogels and their Applications to Metal Adsorption and Enzyme ReactionGas Permeation Study of Carbon Tubular Membrane by Manipulating Carbonization Temperature ProfileApplication of Immobilized Titanium Dioxide as Reusable Photocatalyst on Photocatalytic Degradation of Methylene BlueThermally Activated Clay to Compete Zeolite for Seawater DesalinationThe Role of Fe2+ Ions on the Photocatalytic Reaction of Ag3PO4 for Rhodamine B DegradationSynthesis of Bi2O3/Ag3Po4 Composites and their Photocatalytic Activities under Visible Light IrradiationPhotocatalytic Removal of 2,4-D Herbicide on Lanthanum Oxide-Modified Titanium DioxideSynthesis of Mesoporous Silica Particles with Fibrous Morphology via Self-Assembly Process in Microemulsion SystemPhotocatalytic Oxidation of Hexanol over Titanium Dioxide Supported on Mesoporous SilicaEnhanced Photocatalytic Performance of Copper-Modified Titanium Dioxide Prepared by UV Reduction MethodReduced Graphene Oxide-Mesoporous Carbon Nitride as Photocatalyst for Removal of N-NitrosopyrrolidineThe Immobilization of Pt/WO3 on the Glass Substrate for Methylene Blue DegradationThe Influence of Montmorillonite Incorporation in Mn-Doped ZnO Nanoparticles for Photocatalytic Degradation of Organic DyesA Comparative Study of the Synthesis of MFI Zeolite by Using High- and Low-Temperature HeatingSynthesis of Fe3O4 Nanoparticles Using the Co-Precipitation Method and its Development into Nanofluids as a Catalyst in Aquathermolysis ReactionsPhotocatalytic Activity Inhibition by ZnO-SiO2 Nanocomposites Synthesized by Sonochemical MethodSynthesis of CuFe2O4-Bentonite Composite for Adsorption of Ni(II) from Electroplating WastewaterComputational Density Functional Theory Study of Hydrazine Adsorption on Ni(110) SurfacePreparation of Fe3O4/TiO2 and Fe3O4/TiO2/CuO Nanohybrids for Photoreduction of Cr(VI)Graphene and Activated Carbon Based Supercapacitor ElectrodesElectrochemical Impedance Spectroscopy Study of Supercapacitors Using Deposited Nickel Oxide Nanoparticles Carbon Monolith ElectrodesSynthesis and Characterization of Li4Ti5O12 Doped by Na and Al as Anodes Material for Li-Ion BatteriesEnhancement of TiO2 Particles Based-Solar Cells Efficiency by Addition of Copper(II) Nitrate and Post-Treatment with Sodium HydroxydePhotovoltaic Characteristics of Inverted Bulk-Heterojunction Organic Solar Cells with Titanium Doped ZnO as their Electron Transport LayerPhotovoltaic and Impedance Characteristics of Quasi Solid-State Dye-Sensitized Solar Cell Using Polymer Gel ElectrolytesEnhancing the Value of Local Silica Sand from Bancar as a Fuel-Cell Sealing MaterialComposite Electrolyte of SOFC Based on Stabilized Zirconia 1Yb10ScSZ NanopowderEvaluating Capacitive Deionization for Measurements of the Salt-Removal of NaCl, KCl and MgCl at Various Cell VoltagesProton Conducting Biopolymer Electrolytes Based on Starch Incorporated with Ammonium ThiocyanateEffect of Al2O3 on the Electrical Conductivity of MgI2-Mg3(PO4)2 Solid ElectrolyteAbsorbance Studies of Perovskite CH3NH3PbI(3-x)Clx as Light Harvester in Solar CellFirst Principle Calculation of Li2Fe0.5Cr0.5SiO4 for Li-Ion Battery CathodeSynthesis of Reduced Graphene Oxide (rGO)/Ni Composite by a Combination of Marcano?s and Microwave Assisted Reduction MethodsPhase Analysis of Natural Silica-Sand-Based Composites as Potential Fuel-Cell Seal MaterialSupercapacitor Carbon Monoliths Electrodes from Activation of Precarbonized Biomass Fibers Added with Cellulose PowderSupercapacitor Activated Carbon Electrode from Composite of Green Monoliths of KOH-Treated Pre-Carbonized Oil Palm Empty Fruit Bunches and HNO3-Treated GraphiteEffects of Activation Time on the Performance of Supercapacitor Binderless Activated Carbon Electrodes Derived from Fibers of Oil Palm Empty Fruit BunchesOn the Role of NaCl Addition to Phase Transformation of TiO2 from TiCl3Theoretical Investigation of Anthocyanidin Aglycones as Photosensitizers for Dye-Sensitized TiO2 Solar CellsThe Improvement of Product Quality and Production Capacity of Metal Coin Dies by Tempering Treatment and PVD TiN Coating in IsodurTM SteelCorrelation between Frequency and Sound Absorption Coefficient of Polymer Reinforced Natural FibreThe Synthesis of Ethyl-1-Benzyl-5-Methyl-1H-1,2,3-Triazoles-4-Carboxylate Using Microwave Assisted Organic Synthesis Method and Determination of its Corrosion Inhibition Activity on Carbon SteelAnalysis of YSZ-Al2O3/YSZ Flame Sprayed Thermal Barrier Coating to Thermal ResistanceObjective and Combinational Analysis of Multiple Kinds of Data Obtained from Severe-Mild Wear TransitionComparative Studies on Thermal Barrier between Modified Polyurethane Using Titanium Dioxide to Montmorillonite NanoclayEffect of Pack Cementation Temperature on Oxidation Behavior of NiCoCrAl Coated LayerCuring Time and Water Repellent Properties of Dammar-Titanium Dioxide Thin FilmHot Corrosion of Aluminide Coated Ti-Al-Cr-Nb-Zr-Y Intermetallic AlloysDevelopment of Sound Absorbent Material Based on Waste and Bamboo FiberTensile and Flexural Properties of Montmorillonite Nanoclay Reinforced Epoxy Resin CompositesFlexural Properties of MMT Reinforced Unsaturated Polyester/Epoxidized Palm Oil Biobased ResinEffect of Magnesium on Hardness and Microstructure of Metal Matrix Composite Al.6061/(Al2O3)p Produced by Stir Casting RouteDynamic Mechanical Properties of PEG 4000 + Quartz CompositesEffect of Composition Variation on the Mechanical Strength of Domestic Waste-Based CompositesEffect of Mica Content on Mechanical Properties of Regenerated Cellulose Nanocomposites via Ionic LiquidsThe Effect of Silica Nanoparticle Filler and Mg(OH)2 Particle Addition on the Compressive Strength of Rice Husk CompositeEffects of Stabilization Temperature on the Chemical and the Physical Properties of Polyacrylonitrile Stabilized FibersDevelopment of Statues from Domestic Waste Composites Coated with Carboneus Phosphor MaterialsEffect of Curing Temperature and Cross-Linker to Pre-Polymer Ratio on the Viscoelastic Properties of a PDMS ElastomerCharacterization of Chitosan-Acrylamide Hydrogels as Soil ConditionerEffect of Alloying Elements on Microstructure of Biomedical Co-Cr-Mo F75 AlloyReduction of Harmful Substances in Cigarette Smoke Using TiO2NanoparticlesThe Influence of Non-Ionic Surfactant on the Physical Characteristics of Curcumin-Loaded Nanofiber Manufactured by Electrospinning MethodCytotoxicity Test of Brown Silk from Attacus atlas L. on Rat Smooth Muscle CellsCotton Thread for Size-Based Blood Cells SortingWax-Impregnated Cotton Fabrics as Cell Culture PlatformEffect of Propofol and Isoflurane Long-Term Anesthesia on Rabbit?s Heart Size as Consideration for Biomaterial Implant Placement
In Vitro Cytotoxicity and In Vivo Tissue Response Study of Foreign Bodies Iron Based MaterialsPoly(Vinyl Alcohol)/Chitosan Nanofibrous Membrane Containing Anredera cordifolia (Ten.) SteenisSynthesis of Chicken?s Eggshells-Based ?-Tricalcium Phosphate BioceramicsMicrostructure and Mechanical Properties of Extruded Mg-1.6Gd as Prospective Degradable Implant MaterialsRadiography Study of Iron-Based Foreign Body Material Degradation at Different Implantation Site in MiceRadiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal ModelSintering of Mg-Ca-Zn Alloy Metallic Foam Based on Mg-Zn-CaH2 SystemMore from Less, Generating Wealth from Lower Grade and Urban Metal/Ore SourcesFriction Spot Welding of Similar AA5754 to AA5754 Aluminum Alloys and Dissimilar AA5754 Aluminum to AZ31 Magnesium AlloysThe Influence of Calcination Temperature on Quantitative Phase of Hematite from Iron Stone Tanah LautThe Processing of Low Grade Nickel Ore from South East SulawesiStudy of Frangible Cu-Sn Composite by Powder Metallurgy MethodThe Influence of Cooling Rate on Macrosegregation in Bi-Sn AlloyCharacterization of Various Types Coal Using Capacitance Measurement TechniqueModification of Ceramic Mold for Investment Casting with Silica Sand as Stucco and Nylon AdditionReduction of Low Grade Iron Ore Using a Mixture of Polyethilene (HDPE/LLDPE) and Coal as an Alternate ReductantEffect of TiO2 and MgO on Microstructure of a-Alumina Ceramics and its Sintering BehaviorUtilization of the Ibai River Sediment as a Raw Material for Producing Ceramic GlazesStudy on the Geopolymerization of Geothermal Silica and KaoliniteEffect of Fabrication Method by Powder Metallurgy on Frangibility Green Bullet Cu-10%Sn as Eco-Friendly BulletMechanism of Macroporous Zirconia Particles Formation Prepared by Hydrothermal SynthesisSiO2/MgO Ratio Effect on Carbothermic Reaction of Synthetic Nickelliferrous MixturesSynthesis of Magnesium Carbonate Using Indonesian DolomiteSynthesis of Magnesia Powder from East Java Dolomite through Leaching, Precipitation and CalcinationPhysical and Chemical Characteristics of Corals from Bidong Island, Terengganu, MalaysiaSonocrystallization Technique to Optimizing the Crystallization Process of PCM CaCl2.6H2OThe Effect of Additives on the Crystallization PCM CaCl2.6H2O for Stabilizing the Air Temperature for Energy Conservation
