Jiang / Han / Liu | New Materials and Advanced Materials | Buch | 978-0-87849-203-9 | sack.de

Buch, Englisch, 1994 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3700 g

Jiang / Han / Liu

New Materials and Advanced Materials


Erscheinungsjahr 2011
ISBN: 978-0-87849-203-9
Verlag: Trans Tech Publications

Buch, Englisch, 1994 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3700 g

ISBN: 978-0-87849-203-9
Verlag: Trans Tech Publications


Volume is indexed by Thomson Reuters CPCI-S (WoS).These 379 peer-reviewed papers, presented in a two-volume set, cover the latest advances in nanocrystalline materials, thin films and chemical vapor deposition, biocomposites, ceramics technology, MEMS, coatings, nanopowders, fuel cells, etc.; together with their practical application.
Jiang / Han / Liu New Materials and Advanced Materials jetzt bestellen!

Weitere Infos & Material


Sponsors, Committees and Preface
Recycled Concrete Using Crushed Construction Waste Bricks Subject to Elevated Temperatures
Volume Fraction Effects of Silicon Carbide on the Wear Behavior of SiCp-Reinforced Magnesium Matrix Composites
Electrical Conductivity and Density of the Molten CaCl2-NaCl-Al2O3 Electrolyte Materials
Characterization of (Al2O3)p/Al Composites In Situ Synthesized by Direct Melt Reaction Method
Study on Lamellar Precipitates of the Austenitic Valve Steel
Analysis on Chaotic Behavior in Rock Damage Rheological Process under Uniaxial Stress
Detection of Kaiser Effect in Marbles under Brazilian Tests
Preparation and Characterization of Modified PVDF-g-PSSA Membrane
Influences of Micro-Arc Oxidation on Pre-Corroded Fatigue Property of Magnesium Alloy AZ91D
Study on Range of the Sampling Period of the Electro-Hydraulic Position Sampling Control System Based on PLC
In Air Template-Free Synthesis of In2S3 Hierarchical Nanostructure from InCl3·4H2O and Thiourea
Preparation, Characterization, and Surface-Enhanced Raman Spectroscopy Activity of Spherical a-Fe2O3/Ag Core/Shell Nanoparticles
Damage Progress Simulation in Unidirectional Composites by Extended Finite Element Method (XFEM)
Quality Determination of Glass/Epoxy Prepreg by NIR Spectroscopy
Multiferroic Bismuth Ferrite Nanoparticles: Rapid Sintering Synthesis, Characterization, and Optical Properties
Investigation for Test Sensitivity of Shearography
Design of New Environment-Friendly Friction Material and Optimization of the Ratio Method
Preparation of Highly Pure Nano-Silver Colloids Modified by Polyethylene Glycol
The Optimization of the Technologic Parameter in Strong Cooling with Single-Tube on the A356 Alloy
Effect of Friction Temperature on Spheroidization and Refinement of Si Particles in Hypereutectic Al-Si Alloys
Flame Retardant Composites of Rare Earth Oxides/ Conventional Flame Retardants/ Silicone Rubber with Good Self-Extinguishing
Green's Function Approach to Crossover Properties for Interaction Parameters of an N-Layer Ferroelectric Thin Film
Preparation and Characterization of BaFe12O19 Hollow Nanocrystalline Aggregations
Structure and Performance of 35 Steel after Strengthened Shot Peening Surface Nanocrystallization and Gas Tufftriding Process
Absorptive and Biodegraded Polyurethane Foamed Urea
Study on Photodynamic Therapy for HL60 Cells Inactivation by Visible Light-Induced Fe-Doped Nano-TiO2 under Magnetic Field
Two Nickel-Bipyridinedicarboxylate Organic-Inorganic Hybrid Materials: Hydrothermal Synthesis, Crystal Structure and Thermal Properties
Performance of the Self-Breathing Air Direct Methanol Fuel Cell with Modified Poly (Vinylidene Fluoride) Grafted onto a Blended Polystyrene Sulfonated Acid (m-PVDF-g-PSSA) Membranes
Effect of Temperature and Inoculation on Structure Property of Chilled Cast Iron Camshaft
Experiment Analysis on Transient Braking Factor of Drum Brake
Studies on Related ms Magnitude Rate Models in Triangular Wave Unloading Section of Calcium Medium-Fine Sandstone
Numerical Simulation of Mixed-Mode Crack Induced Failure of Steel Plate Strengthened Concrete Beam
Research on Anti-Friction Mechanism of Ni60A/MoS2 Composite Coating
Numerical Simulation of the Reflective Crack Propagation Path for Open-Graded Large Stone Asphalt Mixes
Thermal Decomposition Kinetic and Electrochemical Properties of KZn2(PO4)(HPO4)
Design and Implementation of Electric Vehicle Power Lithium Battery Protection Board
Microstructure and Mechanical Properties of Magnesium Alloy AZ81 with Yttrium
Titania-Phosphotungstic Acid Nanocomposites Dispersed Homogeneously in Mesopores as the Recyclable Photocatalyst
Fluorescence Enhanced Quantum Dots: Its Synthesis, Optical Properties, and Ecotoxicity Research
Effects of Ultra-Fine Limestone Powder on Workability and Strength of High Strength Concrete
Influence of Substrate Temperature on Structure and Optical Property of Cu3N Thin Films
Thermal Degradation of Hydroxyl-Terminated Poly(L-Lactic Acid) Oligomer into L-Lactide
Effect of Temperature on Structure and Corrosion Resistance of Oxide Scale on Hot Rolled Strip
An Experimental Study of Bipolar Pulse Electroforming Nickel
The Study of Liquid-Liquid Structural Transition of PbSnBi Ternary Alloy
Crack Healing Behavior of 12%Cr Ultra-Super-Critical Rotor Steel
Experimental Research on Bending Behavior of 2.5D Woven Fabrics
Microstructures and Properties of Bainitic Nodular Cast Iron Treated by Controlled Cooling and Austempering Treatment
Error Model and Simulation to Arbitrary Point of Automobile Panels in Normal Mechanical Parameter Measurement Instrument
Effective Thermal Conductivity of Composites with Different Particle Geometries and Interfacial Thermal Resistance
Study on Structure and Magnetization of Spinel Ferrites
Element Selection and Meshing in Finite Element Contact Analysis
Characterization and Thermal Behaviour of Polymer-Dispersed Liquid Crystals
Experimental Study on Polyphosphoric Acid (PPA) Modified Asphalt Binders
Effects of Ultra-Fine Limestone Powder (LP) and Fly Ash Complex Adding on the Workability and Strength of Concrete
Development on Microalloyed High Carbon Steel Used for Fracture Splitting Connecting Rods
Preparation of Carbon-Coated Nano-Fe, Co Particles and their Effects on the Thermal Decomposition of Ammonium Perchlorate
Immobilization of Radioactive Wastes into CaTiO3 Synroc by the SHS Method
Boron and Phosphorus Segregation Behavior at Grain Boundary in a Ti-If Steel after Annealing
Preparation and Properties of Nylon Composite Powder by Selective Laser Sintering
Effect of Heating Temperature of Quenching on the Properties of TiCp/Fe Composite
Integrated Innovative Technology for Micro-Manufacturing Based on Precision Cutting and Thin Films Deposition
Kinematics and Trajectory Tracking Motion Plan of an Unmanned Bicycle
Cutting Line Design Method for Woven Composite Materials Fitting to Free Surface
Corrosion Inhibition Mechanism of Magnetic Field on Carbon Steel
Parameter Simulation for Quenching and Pre-Stretching about Aluminum Alloy Thick Plates Based on MARC Finite Element
Chloride Binding of Cementitious Pastes
Research about Online Inspection System for the Assembly Quality of Automobile Gearbox Sliding Bracket
Preparation of Low Chlorine Shellac by Catalytic Hydrogenation with Pd/C
Study on Bio-Hydrogen Production of Different Fermentation Types
Feature Extraction of Machine Vibration Using Lifting Wavelet Denoising and EMD and its Application in Fault Diagnosis
Effect of Volume Fraction of NiMnGa Powders on Magnetic-Field-Induced Strain in NiMnGa/Polymer Composites
Photodegradation of Ammonia by TiO2 Nanoparticles Produced by Flame CVD Process
Thermal Insulation Behaviors of Rinforced Concrete Composite Wall with Inner Insulating Layer
Recent Advances in the Bioactivities and Structural Analysis of Chondroitin Sulfate
Phase Transformation and Properties under Different Quenching Mediums of a X120 Pipeline Steel
The Microstructure and Enhanced Field Electron Emission Properties of Boron-Doped Nanocrystalline Diamond Films by Microwave Plasma Chemical Vapor Deposition
Numerical Simulation in Soft Argillaceous Shale Geo-Material Based on Porous Elasto-Plastic Model
Application of Calculus Equation in Solving Thermal Decomposition Kinetics Parameters of Fire-Retardant Foam
A Novel Method for Estimating State of Charge of Lithium Ion Battery Packs
On Preparation of In Situ Composite Steel with Ultra-High Strength and its Thermal Stability
Visible-Light Activity Evaluation of p-n Junction Photocatalyst NiO/TiO2 Prepared by Sol-Gel Method
Effects of Nano-ZnO Power-Coated PVC Film on the Physiological Properties and Microbiological Changes of Fresh-Cut "Fuji" Apple
Spline Subdomain Approach to Thermal Conduction Problem for Composite with Rectangular Shape Particle
Experimental Study on the Stitching Reinforcement of Composite Member with a Circular Hole
Study on Preparation and Properties of Nano-Modified Polypropylene
Synthesis, Characterization and Application Polystyrene-Bound Manganese Complexes
Repellent Effects of the Insecticide Based on Porous Starch and Fennel Essential Oil against Tribolium confusum
Effect of Soft Foamed Polyethylene on the Property of Portable Mini-Cold Storage
Pb (II)-Imprinted Chitosan/TiO2 Hybrid Film for High Selectivity of Adsorption Lead Ion in Aqueous Solution
Development of Nano-ZnO Coated Food Packaging Film and its Inhibitory Effect on Escherichia coli In Vitro and in Actual Tests
The Kelvin Probe Study on Initial Corrosion of Weathering Steel with NaCl Deposition
Preparation and Characterization of Si3N4/TiCN Composite Ceramic Tool Material
Thermal Stability of Cotton Cellulose Modified with Flame Retardants
Characteristics and Release Behavior of Sodium Alginate Microencapsulation Containing Cinnamon Oil
The Effect of Formulation Variables on the Encapsulation Efficiency and SO2-Release Behavior of Microparticles Containing Sulphite
Analysis of Failure of 316L Heat Exchanger in a Producing Glycine Process Using Hydantoin Method
Simulation Experiment Research on the FRP Bolt under Eccentric Load
Synthesis, Characterization and Mechanical Properties of Hydroxyl-Terminated Hyperbranched Polymer Graft Polyether-Based Aliphatic Polyurethane Elastomer
Smart Materials of Cured Epoxy Polymer Modified by 6F-PEEK with Shape Memory Effect
Simulation of Size Effects in Material with Growth Twins
Forming Limit Diagram of Stainless Steel-Aluminum Alloy Clad
Microstructure and Mechanical Properties of Fly Ash Al-25Mg Composites Processed by Powder Metallurgy Method
Effect of Heat Treatment on Anticorrosion of Soft Magnetic Alloy Fe81Cr17Si1.5TiBRe
Influence of Metal Cations on the Structure and Release Property of Layered Double Hydroxide-Ibuprofen Host-Guest Materials
Influence of Aging on Microstructure and Mechanical Properties of Wrought Magnesium Alloys
Atomic Force Microscopy and X-Ray Photoelectron Spectroscopy Study on the Surface and Interface States of Liq and ITO Films
Preparation on Low-Temperature Resistance Nitrile-Butadiene Rubber Coat-Metal Sealing Gasket
Tribological Properties of Pb-Sn-CNTs Composite Coatings
Magnetic Induction Effect of Amorphous Ribbon Modified by Rare-Earth
A Meso-Scale Simulation on the Effects of Temperature and Strain Rate on the Tensile Mechanical Behavior of Pure Titanium
Fabrication and Growth Mechanism of Star-Shaped Gold Nanoparticles via Seed-Mediated Growth Method
Improved Computation Formula of Thermal Conductivity of Fibrous Porous Materials
The Operation Characteristics of Biohydrogen Production in Continuous Stirred Tank Reactor with Molasses
Thickening Mechanism of Crystalline Polyester Involved in Low Pressure Sheet Molding Compounds
Galvanneal Coating of Galvannealed Steel Sheet Fracture Research by Dynamic Tensility
Effects of SiC Particle and Holding Time on Semi-Solid Microstructure of SiCP/AZ61 Composites
Precipitate Structure in an Alumina Dispersion-Strengthened Copper Base Composite Layer
Electrokinetic Phenomena of Sulfonated-Polyethersulfone Ultrafiltration Membrane Modified by TiO2 Nanoparticles
Phase Evolution and Formation Mechanism in Acicular Mullite Prepared from Kaolinite via Wet Chemistry Method
Preparation of Nano-Al2O3-Coated ZrO2 Modified by Silane Coupling Agent
The Effect of Hydrothermal Treatment on the Micromorphology of Aluminum Sulfate Hydrolysis Product
Research of G105 Chloride Ion Stress Corrosion Cracking
Studies on a New Type of Crosslinked Polyacrylamide Bentonite Composite
Preparation and Characterization of Nanometer Calcium Titanate Immobilized on Aluminum Oxide and its Adsorption Capacity for Heavy Metal Ions in Water
Synthesis and Characterization of Nanocrystalline ZnO Powders by a Novel Combustion Synthesis Method
Measurement and Correlation for Solubility of D-Glucurono-1,4-Lactone
Effects of Calcining Conditions on the Structures of Co-Doped VO2(M) Nanopowders
Improve the Efficiency of White Organic Light-Emitting Devices Using Double-Doped System
Adsorption of Methylene Blue from Aqueous Solution onto Peracetic Acid-Modified Loosestrife Powder - A New Adsorbent
Photoluminescence and Structural Characteristics of SnO2 Nanopetals Synthesized by Thermal Evaporation
Characteristics of Biohydrogen Production by Ethanoligenens Sp. R3 Isolated from Continuous Stirred Tank Reactor
Beneficial Use of Fly Ash in Concrete Incorporating PCA
Experimental Researches on Detonation of Aluminized Explosives to High-Speed Flyer Impact
Research on Eccentricity Magnification Factor of Eccentric Compression Lightweight Aggregate Concrete Member
Preparation and Characterisation of an Aligned Carbon Nanotube Array on the Ni-Deposited Silicon Surface
Semi-Solid Deformation of Al-Fe Alloy Prepared by Electromagnetic Stirring
Preparation and Research of Tussah Silk Fibroin/Hydroxyapatite Composites
The Effects of the TiO2 Films Thickness on the Performance of Quasi-Solid Dye-Sensitized Solar Cells
Study on the Precipitated Behavior and Stability of the Strengthening Phase Al12(Fe,X)3Si in Al-Fe-Si-X Alloys with the EET Theory
An Improved Method for the Synthesis of SAPO-41
Effect of Anneal Time on Photoelectric Properties of SnS:Ag Thin Films
Research of Environmental Factors of Aluminum Alloys Atmospheric Corrosion Based on Grey Relational Analysis
Characterization of ZnO Nano-Coatings on Fibreboard
Integration of CuO Thin Film and Bi2Te3 for Enhancing the Thermoelectric Conversion Efficiency of Thermoelectric Generator
A Micromechanical Model for Deformation Behavior of Nanocrystalline Copper
Genetic-Fuzzy Optimal Design of Straw Crusher Based on Full-Feeding Combine Harvesters
Measuring and Modeling of Viscosities of Selected CaO-MgO-Al2O3-SiO2 Slags
Adsorption of Phthalate Esters (PAEs) from Aqueous Solution onto Activated Carbons from Softstem Bulrush
Preparation and Characterization of SiO2/VO2 Composite Particles
Phase Evolution and Microwave Dielectric Properites in the Systems of (Mg1-xCax)2SiO4 Ceramics
Thermal Shock Stability of Large Size ZrB2 Ceramic Matrix Composite Material
Technique Based on an Innovative Design of CNC Turning Center
Study on Microstructure Characterization of Al-N Codoping ZnO Films and Doping Mechanism
Steam Reforming of Simulated Coke Oven Gas over Ni/Al2O3-MgO Catalysts for Syngas Production
The Application of Calcium Sulfate Whisker in Styrene-Acrylic Emulsions
Preparation and Characterization of Marble/Unsaturated Polyester Resin Composite Materials
Effect of Thermal-Oxidative Aging on the Mechanical Properties of Carbon Fiber Reinforced Bis-Maleimide Composites
Research on Removal of Sulfide Inclusion in Steel Surface by Molten Salt Electrolysis
The I-V Characteristics of the 3,3',5',5-Tetra-Tert-Butyl-Azobenzene Optical Molecular Switch: A First-Principles Study
Thermal-Mechanical Analysis for Surface Cracks on FTSC Slab
Preparation and Characterization of CuO-Doped ZnO
EBSD Analysis of HAZ Microstructure Characteristics of a High Strength Low Welding Crack Susceptibility Steel
Preparation and Investigation of Hydrophobic Mesoporous Silica Films
Catalytic Reforming of Model Tar Compounds from Hot Coke Oven Gas for Light Fuel Gases Production over Bimetallic Catalysts
Solute Pre-Precipitation and Phase Transformation in a Mg-Zn-Gd Alloy
Studying on Preparation of AZO Thin Films with Sol-Gel Method
Investigation on Generation Performance for Tubular Direct Methanol Fuel Cell
Determination of Thickness for the Individual Layer of Strained P-Type Al0.11Ga0.89NGaN Superlattice by High Angle Annular Dark Field Scanning Transmission Electron Microscopy
Wear Properties of Reaction Sintered B4C Composites
Vibration Emulating and Measuring of Pipe System Being Filled with Liquid Ammonia in Chemical Ship
Test on the Mortar Mix Ratio with Aeolian Sand of Mu Us Desert
SEM Analysis of Non-Conducting Materials under Low Vacuum Conditions
Effect of Various Pretreatment Methods of Inoculum on Biohydrogen Production
Prepared of Flower-Like CuO via CTAB-Assisted Hydrothermal Method
Morphology of the Diamond Thin Films Grown by Microwave Plasma Chemical Vapor Deposition with Different Aftertreatments
Optically Active Films Fabricated from Poly(Allylamine Hydrochloride) and R-(+)-1-Phenylethylamine Derivatives of Poly(Ethylene-Alt-Maleic Acid) with Different Degrees of Substitution
Thermal Property, Morphology, Mechanical and Rheological Properties of a Modified Bio-Polymers Prepared by Blending Poly(3-Hydrobutyrate-Co-4-Hydrobutyrate) with Chain Extenders
An Ab Initio Study on Negative Differential Resistance in Pyrrole Trimer Molecular Device
Preparation and Characterization of Modified Activated Carbon and its Influencing Factors of Cd2+ Adsorption
Oxidation Behavior of TiAl Based Alloys Prepared by Spark Plasma Sintering
Behavior of Phosphorus Adsorption from Aqueous Solutions on Modified Activated Alumina
A Novel Structure Design of Conductive and Magnetic Electromagnetic Shielding Composites
Research on Optimization Design of the Lateral Stiffness Satio about the Frame-Supported Multi-Ribbed Structure
Protection Capability of Different Confinement Plates for Rubber Composite Armours against Shaped Charges
Preparation, Characterization and Magnetic Properties of Fe59Co41 Alloy Nanowires Using AC Electrochemical Deposition
Effects of Salt Corrosion and Freeze-Thaw Cycle on Rubberized Cement-Soil
VOCs Decomposition Using Multiple Catalysis in Non-Thermal Plasma Processing
Development and Characteristic of Bacterial Cellulose for Antimicrobial Wound Dressing
Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates
Experimental Study on Performance of Green Complex Binder of Low-Grade Fly Ash and Limestone Powder
Experiment on C40 Machine-Made Sand Concrete with Combined Admixture of Limestone Powder and Substandard Fly Ash
Preparation and Characterization of MgCr2O4 Nanocrystals by Microwave Method
Ductile Damage Evolution Analysis of Lead-Free Sn-Zn Solder Based on Meso Topography
Behavior of Carbide Dissolution and Precipitation in WD1 Steel Used for Warm Work Dies
Preparation and Characterization of Nanosized Barium-Strontium Titanate Immobilized on Aluminum Oxide and its Application in Separation of Cr(III) and Cr(VI)
An Analysis of Slope Stability of Sand Embankment with Shear Strength Reduction (SSR) Method
2D FE Modeling of Cracked Aluminum Plates Repaired with Adhesively Bonded Composite Patches
The Preparation of ZnO Gas-Sensing Material by Nucleation-Crystallization Separation Method
Microstructure and Mechanical Properties of Hot Rolled TRIP Steel Based on Dynamic Transformation of Undercooled Austenite
Preparation and Characterization of Water Based and Double Enveloped Nano-Fe3O4 Magnetic Fluids
Relationships between the Abilities of the Forming Bond of the Precipitated Phases and their Precipitations and Phases Transition in Al-Fe-Si Alloy
Erosion-Abrasion Behavior of Eutectic Al-Mn Alloy Matrix Composites Reinforced with Al2O3 Particulates
FEM Analysis and Experimental Study for Bond Strength of High-Strength Coating by Wedged Load Test Method
Effects of Fe2+ on Fermentation and Biohydrogen Production of Biohydrogenbacterium R3 sp.nov.
Hydrogen Production by Hydrolyzing Zn Nano-Particles in a Cyclone Reactor
Effect of Minor Sc, Zr and Ti Additions on the Microstructures and the Mechanical Properties of Pure Aluminium
Research on Microstructure and Oxidation Resistance of Double Glow Plasma Discharge Surface Titanizing on CrZrCu Alloy
Effects of Yttrium on Microstructure and Mechanical Properties of In Situ (Al2O3+Al3Zr)p/A356 Composites
Simulation on Displacement Characteristics of Variable Displacement of Double-Action Vane Pump
Study and Design of Sheet Metal Bending Springback Adjustable Die

Ab Initio Investigations of Electronic Structure and Optical Properties of Ag-F Codoped ZnO
The Influence of pH Values on Corrosion Properties of 316L Stainless Steel in Simulated Circulating Cooling Water
Photocatalytic Activity of TiO2-NaY Composite Photocatalyst on Methyl Orange Degradation
The Influence of Particle Size, Concentration of Electrorheological Fluid on the Properties and Morphology of ER
The Stress Concentration Factor of Different Corrosion Pits Shape
Numerical Simulation of Forming Force in Lateral Bend Forming
Crack Pattern of SRUHSC Column and SRC Beam Joint Subjected to Reversal Cycle Load
TiO2 and 5A Zeolite Composite Prepared for Photocatalytic Methyl Orange Degradation
Research on Surface Modified Micro/Nano-MgO Particles Improve Tribological Characteristics of Lubricating Oil
The Coal Oxidized by HNO3 on the Conductivity Effect of Coal-Based Polyaniline
Methods to Make Silicon and Silica Luminescent
Preparation of C/SiC Composites by SLA-Intergrated Liquid Silicon Infiltration Method
Study on the Relationship between Microscopic Structure and Mechanical Properties of HTPB Propellant
3D Braided Geometry Structures Based on Space Group
Electrochemical Compatibility between Natural Graphite and Li6BaLa2Ta2O12 or Organic Electrolytes
Characters of Expressway Widened Engineering Reinforced with Geotextile
Expandable Tubing R&D on the Material of FMA Multiphase Alloy Steel
Drying Shrinkage of Concrete Affected by Content of Stone Powder in Proto-Machine-Made Sand
Molecular Dynamics Simulations of Uniaxial Compression of Ceria and Gadolinia Doped Ceria
The Performance of Barium Sulfate/Nature Rubber Composites Using in Sport Shoes
Microcosmic Deform Incoordination and the Law of Limiting Strength Release during Shearing Failure of Concrete
Mechanism Analysis of Rutting at Urban Intersections Based on Numerical Simulation of Moving Loads
A ZnO/Chitosan Composite Film: Fabrication and Anticorrosion Characterization
A New Method for Manufacturing Composite Ingot of 3004/4045 Aluminum Alloy
Design and Implementation of BMS Based on STC12C5A60S2
A Statistical Constitutive Model for the Strength of Brittle Fiber at Different Strain Rates
Experimental Investigation of Microsegregation in Low Frequency Electromagnetic Casting of Al-4.5%Cu Binary Alloy
Hydrothermal Synthesis and Characterization of Single-Crystal Lead Titanate Nanoflakes
Mechanical Wear of SnO2-C Morph-Genetic Composite Materials
Preparation and Characterization of Shellac Fiber as a Novel Material for Controlled Drug Release
Synthesis of Star-Shaped PLA via Direct Melt Polycondensation: 1. Using L-LA as Starting Material
The Effect of Melt-Spinning Technology on the Degradation of Poly(Glycolic Acid) Fiber In Vitro
The Fracture Research of Hexagonal Duralumin Nut
Influence of Citric Acid on the Formation of Hydroxyapatite Powders by Using Ca(NO3)2-P2O5 Ethanol Solution System
Effect of Heat and Wet Treatment on the Strength of PLA Fiber
Application of a Coating Sensor to Aluminum Structural Crack Monitoring
The Research on Anti-Corrosion Property of Epoxy/Polyurethane Coating of Magnesium Alloys
Controllable Preparation of Multi-Morphology Nanosized Silica by Hydrolysis of Mixed Chlorosilanes in Mixed Solvent of Alcohol and Water
Experimental Study of Rolling Contact Fatigue Life of Zirconia Ceramic Ball
Effect of Tempering on Microstructure and Mechanical Properties of Ultra Low Carbon Heavy Steel Plate with Intercritical Quenching
Effects of Heating Period of Time on Tensile Property of Three-Dimension and Five-Direction Braided/Epoxy Resin Composites at High Temperature
Analysis of Influence Rules of Material Composition on Compaction Characteristic of Asphalt Mixtures Using SGC Tests
Simulation and Microstructure Predict during Hot Die-Forging of Cast Mg-7.0Al-0.2Zn Magnesium Alloy
Study on the Relationship between Transparency and Morphology of Shoushan Stone
Synthesis of Star-Shaped PLA via Direct Melt Polycondensation: 2. Using D,L-LA as Starting Material
Synthesis and Characterization of Fluorine-Substituted Hydroxyapatite Powder by Polyacrylamide-Gel Method
Families of Exact Solutions for Two-Component Bose-Einstein Condensates
Mechanical Properties of Bulk Nanocrystalline Silver-Using Compression Tests
Design on Operating Conditions Date Acquisition and Remote Transmission System for Electric Vehicle
Study on Preparation of Activated Carbon from Corncob Furfural Residue with ZnCl2 by Microwave Irradiation
Influences of Complex Modification of RE and P on the Microstructure and Impact Toughness of Hypereutectic Al-24Si Alloy
Electrospun Antibacterial Chitosan/Poly (Vinyl Alcohol) Nanofibers Containing Silver Nanoparticles
Synthesis and Properties of N,N-Dimethyl-O-Quaternary Ammonium Chitosan
Preparation of High-Porosity NiTi Alloys by Powder Sintering with NaCl Pre-Forming
Analysis of Knuckle Arm's Fatigue Life
Antibacterial Property and Mechanism of Copper Alginate Fiber
Preparation of Chitosan/Cyclodextrin/Trisodium Citrate Nanoparticles for the Poor-Water Drug Carrier Material
The Influence of Electroless-Silver Coated Cenosphere Powders on the Electromagnetic Shielding Interference Effectiveness and Mechanical Properties of the Silicone Rubber
The Influenceof Rare Earth Element on a-Solidification of A356 Alloy
Effect of Intercritical Quenching on Microstructure and Mechanical Properties of Ultra Low Carbon Heavy Steel Plate
Study on the Supramolecular Interaction of Curcumin and RM-ß-CD-m
Effect of Niobium on the Microstructure and Mechanical Properties of Low Carbon Steel Plate with Intercritical Quenching
Effect of Combined Electromagnetic Field on Microstructure and Surface Quality of (Al2O3+Al3Zr)P/Al Composites
Effect of La2O3 on the Microstructure and Electrical Properties of (Ti,Sn)O2 Varistor Ceramics
Effect of Cr Content on Impact and Abrasion Properties and Mechanisms of Low Carbon Alloy Steel at Corrosive Condition
A Novel Mixed Hydroxide Method for Hydroxyapatite Preparation
Production of Lactic Acid by Simultaneous Saccharification and Fermentation Using Steam Pretreated Lespedeza Stalks as Inexpensive Raw Materials
Study on the Forming and Self-Repairing of Ni60A/MoS2 Composite Lubricating Film
Development of a Novel and Bi-Functional Quantum Dots as FRET Energy Donor
Electronic Structure and Bonding Characteristic of NdMgNi4H4
Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloy during Thermal Exposed at Elevated Temperature

In Situ Fabrication and Properties of (Al3Ti)P/6351 Composites
Micro-Magnetic Field at the Surface of Surgical Materials for Biocompatibility Improvement
Biomass Biodegradable Food Boxes and Hot Temperature Field of Structural Optimization
Study on the Thermal Decomposition Behavior of MgAl-Hydrotalcite Compounds
The Configuration Design and Biodegradation Test of Biodegradable Material Dishware
Supercritical Solvent Impregnation in Controlled-Release Drugs
The Influence of Elastic Modulus on the Adhesion of Fouling Organism to Poly(Dimethylsiloxane) (PDMS)
Rheological Behaviour of Core-Shell Emulsion/Amine Crosslinking Process
Cytotoxicity and Antiviral Activity of Calcium Alginate Fibers and Zinc Alginate Fibers
Strength Development of Concrete with Proto-Machine-Made Sand
A Novel Synthesis of Acetophenone Benzopyran Derivative
Inclusion Process of Curcuminoid-ß-Cyclodextrin Complex and its Stability
Research and Development of Deep-Sea Pipeline Steel
Purification and Characterization of a Natural Lectin from the Seed of Peanut Arachis hypogaea
The Yield Criterion for Processing Bamboo Fiber under Rolling Load

Toxoplasma gondii DNA Sensor Based on a Novel Ni-Magnetic Sensing Probe
Controlling the Wall Thickness and Pore Size of SBA-15 by Using PPG and PEG as Additives
Study on an Air Filter Material Immobilized with Bio-Antimicrobials
Plasma Treatment on Silk Fibroin Powder/PU Blend Film
Comparison of Ohmic Contact Characteristics of Different Metal on N Type 4H-SiC
Synthesis and Application of Polyurethane Hydrogel Carrier on Nitrobacteria Immobilization
Preparation of Eucommia ulmoides Leaves Antioxidant and its Antioxidation Activity In Vitro
Fabrication and Characterization of a Toxoplasma gondii DNA Sensing System
Combined Fireproof and Stuffing Materials Applied to Through-Floor Pipes
Capacitive Behavior of MnO2 Nanowires Prepared by Hydrothermal Synthesis Method
The Experiment Study on Making Flame-Retardant by a Brucite in Liaoning Province
Vacuum Flat Bed Filter Control System for Cold Strip Rolling Mill
Experimental Study on Frost Resistance Durability of Lightweight Aggregate Concrete in Na2SO4 Solution
Regeneration of Bagasse Cellulose by Ionic Liquid
Orthogonal Experimental Study on Frost Resistance of Polypropylene Fiber Concrete
Study on Thermal Conductivity of Organic Phase-Change Nano-Fluid
Influence of Ultrafine Limestone Powder on the Performance of High Volume Mineral Admixture Reactive Powder Concrete
Process of In Situ Cr Oxidation in Cu-Cr Pre-Alloyed Powders
Study on Phase-Change Temperature and Latent Heat of Organic Phase-Change Nano-Fluid
Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM Using Copper Tungsten Electrode: A Statistical Approach
Morphological Control Synthesis and Characterization of Hydroxyapatite with Star-Shaped
Investigation on the Diffusion Behavior of Mo-Ni Interface
Research on Rheological and Thermal Properties of P(3HB-4HB)/PEG and the Preparation for Fiber
Failure Analysis and Strengthening Method for Circular Diamond Saw Blade
Preparation of Low Pt-Decorated Ru/C Catalyst and Electrochemical Research
The Corrosion Behavior about Two Ni-Based Alloys in CO2 / H2S Environments
First Principles Calculations of Phase Stabilities of YNi2 and YMgNi4
The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Phosphate/Polyacrylate/Alginate Hybrid Polymer Microspheres
Synthesis, Characterization and Properties of Poly(L-Lactic Acid-Co-a- Phenylalanine) Obtained by Direct Melting Copolymerization
Carbonation of High-Temperature Calcined Hydroxyapatite by Solid-Ion-Exchange Reaction
Synthesis of Polyvinyl Formal Sponge for Wound Care Dressing Application
Effects to Active Composition of Tibetan Medicinal Materials with Twinkling Ultrasonic Cavitation
Synthesis, Characterization and Crystallization of Poly(Ethylene Glycol)-b-Poly(e-Caprolactone)
Effects of Various Sugars on the Mineralization of Microbiologically Induced Calcium Carbonate
Preparation of Biomorphic SiC by Reactive Infiltration of Gaseous Si into Carbonized Millet
Effects of Fiber Mass Fraction and Alkali Concentration on Mechanical Properties of Biodegradable Composites
Biomorphic SiC Prepared from Carbonized Millet by Sol-Gel and Carbothermal Reduction Processing
Forecasting of Cutting Forces in Dental Adjustment of Ceramic Prostheses Using an Artificial Neural Network
Research on Corrosion Fractal Character of LY12CZ Aluminum Alloy Based on Image Processing Technique


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.