Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 2540 g
Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 2540 g
ISBN: 978-3-03835-256-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Conference Organization and Committee
Chapter 1: Nano Materials Science and Technology
Absorption Spectrum of Carbon Nanotubes
Cu–Ni Alloy Nanoparticles Supported on Multiwalled Carbon Nanotubes Composites with Pre-Treated Multiwalled Carbon
Effect of Electrospinning Process on Electrospun Chlorinated Polyvinyl Chloride (CPVC) Nanofibers
Enhanced H2 Sensing of SnO2 Nanowires Functionalized with Pt and Pd Catalyst Nanoparticles
Influence of Vacuum on Nano-Diamond Cathode Field Emission Characteristics
Piezoelectric Effect of Quaic-Nanotetrapods ZnO Nanostructure
Preparation and Characterization of the Amidoxime-Modified Polyacrylonitrile (PAN-Amidoxime) Nanofibre Composite
Size Effects of Heat Conduction for Silicon Nanograins
Viscosity of Al2O3 Nanoparticles Dispersed in Ethylene Glycol
Mechanical Properties of the Honeycomb Nanoporous Membranes
Bandgap Determination of Cubic Rocksalt AlN Film from Experimental and Theoretical Investigations
Chapter 2: Metals, Alloys and Technology
Comparative Analysis of Crack Growth Characteristics Based on Virtual Crack Closure Technique
Effect of Iron Content on the Strength and Conductivity of Cu-Fe In Situ Composite
Gas Sealing Performance Study of Metal W Shaped Seal Ring
Mechanical Property Comparison Analysis of Two Kinds of Shape Memory Alloy Patella Claws Based on Finite Element Method
Mechanics Analysis of Protective Casing and Splicing Sleeve
Research on the Mechanical Properties and Corrosion Resistance of Mg-RE and Mg-Zn-Cu Alloys
Study on Clinching of Titanium Alloy
The Electrochemical Behaviors of HSn70-1A Brass in Polluted Freshwater
The Red Electroluminescence of Iridium Complex at Different Concentrations and Host Materials
Influence of Heat Treatment on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy with RE Elements
Research of Anti-Extrusion Process for Cylinder of Spray-Formed Ultra-High Strength Aluminum Alloy
Deformation Behavior of Mg-7Gd-5Y-1Nd-0.5Zr Alloy during Hot Compression
Experiment on Direct Smelting and Alloying Process between High-Carbon Ferrochrome and Molybdenum Oxide
Production of Fine-Grained and Weak Texture Structure in an Mg-7Gd-5Y-1Nd-0.5Zr Alloy by Multi-Axial Forging
Research on Crack Region’s Electrochemical Corrosion Performance in Hot-Dipping Galvanizing
Study on Hydrogen Content of Solid Industrial Pure Aluminum
Study on the Creep Properties and Microstructures of EW75 Alloy
Study on Tribological Performance of Al2O3 Particle Reinforced the Al-Sn Bearing Alloy
Research on Fatigue Notch Factor of Aluminum Corrosion Pits
The Investigation of Dynamic Stress Equilibrium of Compact Tension Specimen Based on Hopkinson Tension Bar Device
The Phase Change Study of Titanium Concentrate during Heat Treatment
Chapter 3: Steel Materials and Applications
Control Model of Steel Ladle Base on Overlap Time among the Different Casts
Development of Enameling Steel Sheet Used for Heat-Exchanger
Effects of Different Microalloying and Controlled Cooling Technology on Microstructure and Properties of 500MPa High-Strength Rebars
Numerical Simulation and Cold Model Experiments on Ladle Furnace by Ultrasonic
The Effect of Air Knife Flow Rate on Coating Weight and Thickness for a Hot Dipping Process Simulator
The Residual Life Prediction of High Temperature Low Cycle Fatigue of 30CrMnSiA Steel
Thermodynamic Model of Calculation of Sulfur Distribution Ratio between B2O3-Containing Slag and Molten Steel
Microstructure Evolution of Environmental Graphitized Hypoeutectoid Free Cutting Steel
Study of the Solid-State Joining Process for Endless Hot Rolling
Thermal Analysis on Solidification Behaviors of Hypoeutectic Grey Iron in Lost Foam Casting
Study on Oxidation Behavior of Stainless Steels in Short Time
Comparison Study on the Corrosion Resistance of Stainless Steel and Copper Tubes in LiBr Solution in Heat Pump
Chapter 4: Resin, Rubber and Polymer Materials
Crystallisation and Dynamic Mechanical Relaxation Behavior of High Density Polyethylene/Isotactic Polypropylene Blending Monofilaments
Effect of Processing Aids on the Performance of High Filled Polypropylene
Mesoscale Simulations of the Polymer Blends Based on the Mesoscopic Dynamic Method
Research on Static Mechanical Properties of Metal Rubber by Wire Mesh
Research on Vibration Characteristic of Metal Rubber by Wire Mesh
Synthesis, Characterization and Anticorrosion Performances Study of Different Acid Doping Polyaniline
Modeling and Actuation Performance Analysis of Conically-Shaped Dielectric Electroactive Polymer Actuator
Study on Preparation of Biodegradable Polyurethane Foam
Research Progress of the Polyurethane-nTiO2 Self-Cleaning Coating
Design of Discontinuous Fiber Reinforced Injection Molded Polymer Matrix Composite Parts
Molecular Dynamic Simulations on the Compatibility of PP/PA12 Blends
Chapter 5: Optical/Electrical/Magnetic Materials and Technology
Numerical Studies to Signal Characteristics with the Metal Magnetic Memory-Effect Based of Cast Iron
The Study on Growth Interface of Floating Zone Silicon Crystal
Study of Annealing on Fluorescent Derivatives
Hydrothermal Synthesis, Photoluminescence and Room Temperature Ferromagnetism of Co-Doped Rod-Like ZnO Particles
Measurement and Evaluation of Ferrite Surface Crack
Preparation and Electromagnetic Properties of Ferriferrous Oxide/Polyaniline Composites
Synthesis and Luminescence Properties of Na3YSi2O7:Sm3+, Eu3+ Phosphor
Synthesis and Properties of Naphthalimides Schiff Base Fluorescent Probe for Ag+
Synthesis and Photophysical Properties of Charged Iridium(III) Cyclometallates Based on Hole-Transporting Carbazole Unit
Experimental Research of Damage Occurred on Large Cross-Section Conductor by Different Patterns of String Pulley
First-Principles Calculations of Energy Band for Wurtzite ZnO under Uniaxial Loading along [0001] Direction
Determination of 1,2-Benzisothiazolin-3-One in Paper for Food Packaging by Fluorescence Spectroscopy
Fluorescence Study on the Direct Detection of Octylphenolin Plastic Food Packaging Materials
Research Progress on Magnetorheological Fluid
Hydrothermal Synthesis of SrSO4:Eu2+ Microcrystals with Different Morphologies and its Luminescence Properties
Chapter 6: Ceramic Materials and Technologies
A Study on the Green Design of Ceramic Products in the Era of Information
Ceramic Product Design Based on 3D Printing Technology
Effect of La2O3 Addition on the Microstructure and Mechanical Properties of TiC-Based Cermets
Important Components Analysis of Ceramic Rapid Molding Machine
Microstructure Analysis of Al2O3 Ceramic Coatings Composite Steel Plate Prepared by Self-Propagating High-Temperature Synthesis
The Development Trend of Modern Ceramic Products on the Humanized Design
A Ceramic Crack Test Method Based on the Maximum Variance Ratio of Inter-Class and Intra-Class
Chapter 7: Composite Research and Applications
Advances of Study on the Developments and Physical Properties of Composite Materials
Experimental Research on Medium Leakage of CFRP Laminates after Impact
Experimental Study of a Certain Type of Aircraft Structure Repair Adhesive
Impacts of Temperature on Mechanical Properties of FGMs
Influence of MgO Coating Layer on Properties of MgO-CaO Refractories
Investigation of Impact and After-Impact Properties of Carbon Fiber/Epoxy Composites Modified with Multi-Wall Carbon Nanotubes
Research in New Technologies and New Materials in the Sports Industry
Natural Aging Test for CF3011/BA9916-II Composite in Marine Environment
Thermal Behavior, Mechanical Property and Microstructure of Low-Density Polyethylene Filled by Diatomite
Preparation of MFI Membrane on Mesoporous-Layer-Modified Macroporous Al2O3 Substrate by Secondary Growth Method and its Permeation Property
Study on Microstructure Formation of TiAl Based Micro-Laminates Deposited by EB-PVD
Mechanical Properties of Fumed Silica / HDPE Composites
Constitutive Equation for Elevated Temperature Flow Behavior of Fe-Cr-Ni Preform Reinforced Al-Si-Cu-Ni-Mg Aluminum Composite
Chapter 8: Fiber Materials and Textile Materials
Analysis Based on Impact Resistance of Motorcycle Clothing Fabric Performance
Double Face with Pattern Effect Design of Thermal Jacquard Based on Three-Layer Weave Structure
Fuzzy Comprehensive Evaluation of the Wearability of Shapewear Fabric Made of PTT Filament
Study on Properties of Ultrasonication Treated Pulp Fiber
Study on Static and Dynamic Pattern Transformation Glowing Optic Fiber Scene-Like Jacquard Wall-Mounted Fabrics
Study on Wearing Characteristics of Sorona/Cotton Blended Seamless Knitted Fabric
The Research for the Properties of the Outlast/Viscose Blended Yarns
Graft of Bis-QAC to Cotton Fiber and its Antibacterial Characteristics
Characterization and Hydrolization of Acetate Fiber by Sodium Hydroxide
Design and Development of Cool Multifunctional Composite High-Grade Fabrics
Study on Preparation of Modified Cotton with Collagen
The Design and Development of Apparel Fabric in Thin Jacquard Trim Process
Chapter 9: Chemical and Energy Materials and Technologies
Catalytic and Regenerative Properties of Nickel-Based Zeolite Catalysts
Synthesis and Electrochemical Performance of K-Doped Li4Ti5O12 as Anode Material for Lithium-Ion Batteries
Synthesis of Lanthanum Oxide Using Lanthanum Chloride by Hydrogen-Oxygen Flame Pyrolysis Route
Preparation of a New Biomass-CWS with Soluble Sylvite
Effect of Assets of Silicon Film Passivation Layer on the Performance of Silicon Nanowire Solar Cells
Investigation of 4-Methoxysalicylaldehyde Thiosemicarbazone as Inhibitor for Carbon Steel in Sulfuric Acid Solution
Comparison Study of PVDF-HMn2O4 and PES-HMn2O4 Membrane-Type Adsorbents for Lithium Adsorption/Desorption
The Study of Terahertz Time-Domain Spectroscopy of Benzoyl Peroxide
Classification of Tight Sandstone Reservoir Based on the Conventional Logging
Chapter 10: Biomedical and Biomaterials, Applied Research
Effective Components of Hepatoprotective Drugs
Emulsification of Water and Pyrolysis Oil by Sorbitol Derivative Surfactants
Microporous Polypropylene Hollow Fiber Membrane Application in Membrane Oxygenator Model
Improved Dynamic System of Microbial Continuous Fermentation and its Parameter Identification
Extraction of Nanocellulose from Sugarcane Bagasse
Impact of Fillers on Mechanical Properties of Biomass Composites
Effects of Polysaccharides from Radix astragali on Oxidative Stress Induced by Exhaustive Swimming Exercise in Liver and Muscle of Mice
Electrosprayed PVP/Shellac Composite Medicated Microparticles for Providing Biphasic Drug Release Profile
Chapter 11: Manufacturing Materials Processing, Coating and Surface Engineering, Testing and Monitoring Technologies
3D Printing Technology and the Adaptability of Printing Material
A Hybrid Neural Network for Prediction of Surface Residual Stress in MQL Face Turning
A Hybrid Neural Network for Prediction of Surface Roughness in Machining
Bonding Performance of Wood Treatment by Oxygen and Nitrogen Cold Plasma
Calculation of Axial Rolling Torque in Radial-Axial Ring Rolling Process
Comparison for the Test Methods of Fatigue Life of Welded Structures
Comparison of Properties on Withdrawing and Refill Friction Stir Spot Welding Joints
Conventional Localized Instability Criterion of Sheet Metal Forming and its Application in FLD
Current Status and Future Focuses of Typical Pre-Hole Riveting
Development of Cutting Strategy in Ultra-Precision Raster Milling of Freeform Surface
Ductile Fracture Criteria Based on Mesoscopic Void-Damage of Metals under Plastic Forming
Ductile Regime Grinding Aspheric Surface of Hot-Pressed Zinc Sulfide
Effects of Die Temperature on Microstructure Evolution of 7A85 Aluminum Forging
Effects of Phase Matching Pattern on Pulse Laser-Arc Hybrid Welding Process
Error Identification and Compensation with Space Gauge in High-Speed Machine Tools
Experimental Research on Turning Ni-Based Superalloy with MQL Using Organic Alcohols
Experimental Studies of a Precision Tool Setting Method for Micro Tool Based on the Principle of Electric Breakdown in Micro Gap
Experimental Study on Friction and Wear Characteristics of Cemented Carbides YG6 with Titanium Alloys
Full Scale Fatigue Experiment on Submarine Pipelines
Investigation of Femtosecond Laser Ablation Threshold for Nickel Template
Mechanical Performance Prediction of Cold Rolled Ribbed Steel Bars Based on RBF Network with Dividing Variable Space According to Original Materials’ Tensile Strength
Optimization of Thickness Uniformity for Two Times Spray Technology
Prediction of Coiling Temperature of Hot Rolled Strip Based on BP Neural Network
Preplating Processing of CBN Grinding Wheel Substrate
Research of Machining Process on 17-4PH Stainless Steel Superfine Deep-Hole Drilling
Research on Deflection Analysis and Compensation Method of Ram of Boring and Milling Machining Center
Research on Quality Control of Motor Shell Coating Process
Research on the Laser Welding Technology of GH4169
Rolling Process of AZ31 Alloy Bar Using Three Roller Mill
Simulation and Experiment Study on Upsetting Process of Crankshaft
Simulation of Subcritical Crack Growth in Dissimilar Weld Joints with Extended Finite Element Method
Structure and Design Research for 200L Extrusion Hollow Blow Molding Machine Head
Study of Formed Milling Cutter for Involute Gear with Small Numbers of Teeth
Study on Prediction Model of Springback Based on Support Vector Machine
Study on UV Laser Cutting Carbon Fibre Reinforced Composites
Surface Roughness Research in Turning of Damage-Tolerant Titanium Alloy
The Mold for Bonded NdFeB Magnet Compression Molding
The Study of Stability of Time-Delay Systems in Milling
The Study on Mechanical Modeling and Controlling System of Simulating Milling Force Mechanism
Vacuum Brazing of Aluminum Metal Matrix Composites (70 Vol.% SiCp/Al) Using Al-15Cu-8.5Si-4Ni-1.5Mg Filler Metal
Water-Repellent Stability of Superhydrophobic Materials under Hydrostatic Pressure
Influence of Cutting Conditions on Chip Formation in High Speed Milling of Brittle Graphite
Laser Prestressed Bending of Titanium Alloy Sheet
Research on Laser Engraving Technology for Fabric
Research on Microstructure and Wear-Resisting Property of NiCrWMo Laser Cladding on K418
Research on the Corrosion Resistance of Ni-ZrO2 Nanocomposite Coatings
Rolling Force Calculation for Strip Cold Rolling Based on Influence Function Method
Sensor Performance Analysis by Equal Strength Beam Test for Crane SHM
Supplementary Setting of Target Flatness Curves for 1450 Strip Cold Rolling Mill
Adsorption of Anticorrosion and Antiwear Additives on Axletree
Analysis on the Temperature Field of Gear Form Grinding
Analysis the Failure for Earlier Fracture of 60Si2Mn Stabilizer Bar
Effect of KI on the Corrosion Resistance of Ni-P Electroless Plating Coating
Effect of Micro-Alloyed Treatment for 5183 Welding Wire on Microstructure and Tensile Property of Welded Joint
Elastic-Plastic Numerical Simulation of Cold Rotary Forging for Hypoid Gear and the Springback Error
Experimental Investigation on Precision Cutting Ti6Al4V Alloy Using Single Crystal Diamond Tools
Experimental Study of the Pore Density on the Mesh Partition of Exhaust Muffler on Diesel Engine Performance
Exploring Liquid Impact Forming Technology of the Thin-Walled Tubes
Numerical Simulation of Temperature Field in Laser Remanufacturing
Recovery of Nickel and Cadmium from the Multi Metal Hazardous Waste Using Hydrometallurgical Method with Thermometallurgy
Research on Cathode Chronopotentiograms and Interelectrode Resistance during Vacuum Boiling Electroforming
Research on the Abnormal Grain Growth of Goss Grains in Strip-Cast 4.5%Si Grain-Oriented Electrical Steels
Simulation and Parametric Analysis on the Forging Process of Aluminum Alloy Piston in Automobile Engines
Tribological Properties of TiAl Coating on Aluminum Alloy Surface by Supersonic Particles Deposition
The Researches on the BTA Drill Wear Characteristics
A Study on the Electroless Ni–P Deposition of AM60B Magnesium Alloy without HF in Bath
Theoretic Analysis on the Influence of the Press-Brake Manufacturing Precision on the Bending Precision of Sheet-Metal
Simulaiton of the Dual Frequency Capacitively Coupled Ar Plasma Using Fluid Model in Semiconductor Technique
Chapter 12: Applied Mechanics, Building Materials and Development, Construction Engineering
Application Research on Reflective Insulation Coating Composite Insulation Wall
Definition of the Overturning and Holding Moments for Floor-by-Floor Leaning Walls Made from Aerated Concrete Blocks
Detection of Mechanical Properties of Reinforced Concrete Pipes and Affected the Quality of Construction
Influence of Reflective Insulation Coating on Heat Transfer Characteristics of Composite Thermal Insulation Wall
Influence of Sulfoaluminate Cement on the Performances of Self-Leveling Mortar
Low-Shrinkage Alcohol Cement Concrete
Moisture Content's Influence to Pile Bearing Capacity and Finite Element Analysis
Problems of Sub-Mountain Area Development Associated with Collapsing Loess Soils (Case of Tajikistan)
Reinforced Soil Beds on Weak Soils
Research on Improvement of Thermal Insulation and Anti-Radiation Performances of Traditional Wooden Vernacular Dwellings of Tujia Minority in West Hunan
The Application and Research of Residential Home Solar Visor in Shanghai
The Damage Assessment of Reinforced Concrete Column under Blast and Loading of Certain Type Rocket Projectile
The Monitoring and Analysis of the Anti-Slide Pile’s Pile-Soil Interaction
The Safety Estimation of the Marine Pipeline
Analytical Methods for Determination a Load Capacity of Concrete-Filled Tubes under Axial Compression
Choosing the Right Type of Windows to Improve Energy Efficiency of Buildings
Development of the Ventilation System in Historical Buildings of St. Petersburg
Effect of Construction
